Hydrodynamically Balanced Capsule of Famotidine: An Improved Delivery via Gastroretentive Hydrogels

2021 ◽  
pp. 4573-4579
Author(s):  
Ritesh Kumar ◽  
Kashmira J. Gohil
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Release Kinetics ◽  
Mixing Time ◽  
Fickian Diffusion ◽  
Absolute Bioavailability ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
In Vitro Drug Release

Objective: The aim of the present study was to increase the absolute bioavailability of famotidine, enhanced patient compliance in the treatment of peptic ulcer by increasing its gastric residence time and controlled local release of drug upto 12 hours. Materials and Methods: Hydrodynamically balanced capsules of famotidine were prepared, consisting of floating matrix granules, which formed hydrogels. Effects of different formulation variables namely hypromellose (HPMC 4000 cps, HPMC 5600 cps, HPMC 15000 cps), effervescent agent (potassium bicarbonate) and mixing time were studied. Optimization study included 23 full factorial design with t50% and t80% as the kinetic parameters (response variable). Matrix characterization included scanning electron microscopy. All prepared formulations were evaluated to various parameters such as micromeritics properties, % buoyancy and in vitro drug release studies. Results and Discussion: The optimized formulation (F4) remains buoyant for more than 12 hrs. The in-vitro drug release study indicated that increasing the viscosity of HPMC resulted in sustained drug release with long floating duration. SEM studies showed definite entrapment of the drug in the matrix and hydrogel formation. Results showed a pH independent but polymer viscosity dependent drug release profile. The release kinetics followed Higuchi model and mechanism of release was found to be non-Fickian diffusion. Conclusion: Famotidine-loaded hydrodynamically balanced capsules were successfully prepared and prove to be useful for prolonged gastric residence of the drug, better bioavailability, patient compliance and improve delivery for enhanced anti-ulcer activity.

Synthesis, Characterization and in-vitro drug release studies of a macromolecular prodrug of Didanosine.

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
Neeraj Agrawal ◽  
M.J. Chandrasekar ◽  
U.V. Sara ◽  
Rohini A.
Keyword(s):  
Drug Release ◽  
Drug Level ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Alkaline Environment ◽  
Stomach Acid ◽  
Release Studies ◽  
Macromolecular Prodrug

A macromolecular prodrug of didanosine (ddI) for oral administration was synthesized and evaluated for in-vitro drug release profile. Didanosine was first coupled to 2-hydroxy ethyl methacrylate (HEMA) through a succinic spacer to form HEMA-Suc-ddI monomeric conjugate which was subsequently polymerized to yield Poly(HEMA-Suc-ddI) conjugate. The structures of the synthesized compounds were characterized by FT-IR, Mass and 1H-NMR spectroscopy. The prodrug was subjected for in-vitro drug release studies in buffers of pH 1.2 and 7.4 mimicking the upper and lower GIT. The results showed that the drug release from the polymeric backbone takes place in a sustained manner over a period of 24 h and the amount of drug released was comparatively higher at pH 7.4 indicating that the drug release takes place predominantly at the alkaline environment of the lower GIT rather than at the acidic environment of the upper GIT. This pH dependent sustained drug release behavior of the prodrug may be capable of reducing the dose limiting toxicities by maintaining the plasma drug level within the therapeutic range and increasing t1/2 of ddI. Moreover, the bioavailability of the drug should be improved as the prodrug releases ddI predominantly in the alkaline environment which will reduce the degradation of ddI in the stomach acid.

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals EMULSOMES FOR LIPOPHILIC ANTICANCER DRUG DELIVERY: DEVELOPMENT, OPTIMIZATION AND IN VITRO DRUG RELEASE KINETIC STUDY

2021 ◽  
pp. 114-121
Author(s):  
S. DUBEY ◽  
S. P. VYAS
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Particle Diameter ◽  
Release Profile ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Kinetic ◽  
In Vitro Drug Release ◽  
Solid Lipid

Objective: The objective of the present study was to formulate and characterize paclitaxel (Ptx) loaded sterically stabilized emulsomes to provide non-toxic and biocompatible carriers with high Ptx loading efficiency. Methods: Plain (P-Es) and sterically stabilized emulsomes (SS-Es) were prepared by a modified solvent evaporation method using tristearin as solid lipid and optimized for lipid to (DSPC+CHOL+DSPE-PEG)/ tristearin ratio, lipid/lipid-PEG (DSPC+CHOL/DSPE-PEG) molar ratio, solid lipid concentration, phospholipid concentration, organic to aqueous phase volume and homogenization time based on their effect particle size and entrapment efficiency. Optimized emulsomes were characterized for morphological features, in vitro drug release kinetics and protection from plasma protein. Results: The emulsomes so formed were uniform in size with a mean particle diameter of 275±5.52 and 195±6.4 nm for P-Es and SS-Es respectively. All the formulations showed pH dependent drug release with a slow and sustained release profile. Slower drug release was observed from sterically stabilized emulsomes than the plain emulsomes. The drug release profile followed the Higuchi model with the Fickian diffusion pattern. The Pegylation of emulsomes significantly reduced the in vitro protein absorption. Conclusion: The sterically stabilized emulsome can serve as a novel non-toxic platform with longer circulatory time for the delivery of Paclitaxel and other poorly water-soluble drugs as well.

Formulation and Evaluation of Chitosan-Polyaniline Nanocomposites for Controlled Release of Anticancer Drug Doxorubicin

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Dillip Kumar Behera ◽  
Kampal Mishra ◽  
Padmolochan Nayak
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Nanocomposite Films ◽  
Casting Method ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Clay Particles ◽  
Solution Casting Method ◽  
Nanoclay Content

In this present work, chitosan (CS) crosslink with polyaniline (PANI) with montmorilonite (MMT) called as (CSPANI/MMT) and CS crosslink with PANI without MMT called as (CS-PANI) were prepared by employing the solution casting method. Further the formation of nanocomposites CS-PANI/MMT and CS-PANI were investigated using XRD, FTIR, SEM and tensile strength. Water uptake and swelling ratio of the CS-PANI and CS-PANI/MMT were found to decrease with increase in concentration of clay. Mechanical properties of the CS-PANI and CS-PANI/MMT were assessed in terms of tensile strength and extensibility using texture analyzer. Increase in tensile strength and reduction in extensibility was reported with increase in the nanoclay content. In vitro drug release study on CS-PANI and CS-PANI/MMT indicated pronounced sustained release of doxorubicin by the incorporation of clay particles in the CS polymer matrix. Overall CSPANI/MMT nanocomposite films exhibited improved mechanical and sustained drug release properties than CS-PANI.

Development and Evaluation of Controlled Release Mucoadhesive Tablets of Captopril

1970 ◽  
Vol 9 (3) ◽  
pp. 3318-3329
Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Xanthan Gum ◽  
Diffusion Mechanism ◽  
Matrix Tablets ◽  
Fickian Diffusion ◽  
Content Uniformity ◽  
In Vitro Drug Release ◽  
Mucoadhesive Tablets

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

Design and Synthesis of a Novel Gabapentin-Phosphotidylcholine Conjugate for Targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier

2020 ◽  
Vol 16 ◽  
Author(s):  
Anjali P.B ◽  
Jawahar N. ◽  
Jubie S. ◽  
Neetu Yadav ◽  
Selvaraj A. ◽  
...  
Keyword(s):  
Drug Release ◽  
Phospholipase A2 ◽  
Release Kinetics ◽  
Entrapment Efficiency ◽  
Structural Analog ◽  
Fickian Diffusion ◽  
Release Kinetic ◽  
Nanostructured Lipid Carrier ◽  
Discovery Studio

Background: : Epilepsy is a genuine neurological turmoil that effects around 50 million individuals around the world. Practically 30% of epileptic patients experience the ill effects of pharmaco-obstruction, which is related with social seclusion, subordinate conduct, low marriage rates, joblessness, mental issues and diminished personal satisfaction. At present accessible antiepileptic drugs have a restricted viability, and their negative properties limit their utilization and cause challenges in patient administration. Gabapentin 1-(aminomethyl)cyclohexane acetic acid, Gbp , (trade name Neurontin), a structural analog of γ-aminobutyric acid (GABA), BCS class 3 drug with having permeability issues. Objective: This work was an attempt to formulate and characterize a new approach to treat epilepsy by targeting to Phospholipase A2 Enzyme through Nanostructured Lipid Carrier. Methods: Docking studied carried out using Accelrys Discovery studio 4.1 Client and gabapentin and phosphotidylcholine were conjugated through chemical conjugation. Nanostructured lipid carrier (NLC) was prepared using hot homogenization technique. Results: The libdock score of Gabapentin- Phosphotidylcholine conjugate (192.535) were found to be more than Gabapentin (77.1084) and Phosphotidylcholine (150.212). For the optimized formulation the particle size (50.08), zeta potential (-1.48), PDI (0.472) and entrapment efficiency (77.8) was observed. The NLC was studies for in-vitro drug release studies and release kinetics. Finally found that the drug release from the NLC followed Higuchi release kinetic and the mode of drug release from the NLC was found to be Non- Fickian diffusion. Conclusion: The formulated Nanostructured lipid carrier of Gabapentin-Phosphotidylcholine conjugate may be able to use to prevent seizure.

Development and Optimization of Sustained Release Moxifloxacin Hydrochloride Loaded Nanoemulsion for Ophthalmic Drug Delivery: A 32 Factorial Design Approach

2020 ◽  
Vol 12 ◽  
Author(s):  
Sagar R. Pardeshi ◽  
Harshal A. Mistari ◽  
Rakhi S. Jain ◽  
Pankaj R. Pardeshi ◽  
Rahul L. Rajput ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Factorial Design ◽  
Water Solubility ◽  
Tween 80 ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Bacterial Conjunctivitis ◽  
Promising Alternative

Background: Moxifloxacin is a BCS class I drug used in the treatment of bacterial conjunctivitis and keratitis. Despite its high water solubility, it possesses limited bioavailability due to anatomical and physiological constraints associated with the eyes which required multiple administrations to achieve a therapeutic effect. Objective: In order to prolong drug release and to improve antibacterial efficacy for the treatment of bacterial keratitis and conjunctivitis, moxifloxacin loaded nanoemulsion was developed. Methods: The concentration of oil (oleic acid), surfactant (tween 80), and cosurfactant (propylene glycol) were optimized by employing a 3-level 2-factorial design of experiment for the development of nanoemulsion. The developed nanoemulsion was characterized by particle size distribution, viscosity, refractive index, pH, drug content and release, transmission electron microscopy (TEM), and antibacterial study. The compatibility of the drug with the excipients was accessed by Fourier transform infrared spectroscopy (FTIR). Result: The average globule size was found to be 198.20 nm. The TEM study reveals the globules were nearly spherical and are well distributed. In vitro drug release profile for nanoemulsion shown sustained drug release (60.12% at the end of 6 h) compared to drug solution, where complete drug released within 2 h. The antibacterial effectiveness of the drug-loaded nanoemulsion was improved against S. aureus compared with the marketed formulation. Conclusion: The formulated sustained release nanoemulsion could be a promising alternative to eye drop with improved patient compliance by minimizing dosing frequency with improved antibacterial activity.

scholarly journals Polymer/Iron-Based Layered Double Hydroxides as Multifunctional Wound Dressings

Pharmaceutics ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 1130
Author(s):  
Mariana Pires Figueiredo ◽  
Ana Borrego-Sánchez ◽  
Fátima García-Villén ◽  
Dalila Miele ◽  
Silvia Rossi ◽  
...  
Keyword(s):  
Drug Release ◽  
High Performance ◽  
Mechanical Performance ◽  
Release Kinetics ◽  
Wound Dressings ◽  
In Vitro Drug Release ◽  
Improved Performance ◽  
Double Hydroxide ◽  
Double Hydroxides

This work presents the development of multifunctional therapeutic membranes based on a high-performance block copolymer scaffold formed by polyether (PE) and polyamide (PA) units (known as PEBA) and layered double hydroxide (LDH) biomaterials, with the aim to study their uses as wound dressings. Two LDH layer compositions were employed containing Mg2+ or Zn2+, Fe3+ and Al3+ cations, intercalated with chloride anions, abbreviated as Mg-Cl or Zn-Cl, or intercalated with naproxenate (NAP) anions, abbreviated as Mg-NAP or Zn-NAP. Membranes were structurally and physically characterized, and the in vitro drug release kinetics and cytotoxicity assessed. PEBA-loading NaNAP salt particles were also prepared for comparison. Intercalated NAP anions improved LDH–polymer interaction, resulting in membranes with greater mechanical performance compared to the polymer only or to the membranes containing the Cl-LDHs. Drug release (in saline solution) was sustained for at least 8 h for all samples and release kinetics could be modulated: a slower, an intermediate and a faster NAP release were observed from membranes containing Zn-NAP, NaNAP and Mg-NAP particles, respectively. In general, cell viability was higher in the presence of Mg-LDH and the membranes presented improved performance in comparison with the powdered samples. PEBA containing Mg-NAP sample stood out among all membranes in all the evaluated aspects, thus being considered a great candidate for application as multifunctional therapeutic dressings.

Formulation and Evaluation of Transdermal patch of Methimazole

2021 ◽  
pp. 4667-4672
Author(s):  
Nani Tadhi ◽  
Himansu Chopra ◽  
Gyanendra Kumar Sharma
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Transdermal Patch ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Drug Release Study ◽  
Percent Moisture ◽  
Release Study

Transdermal patch is a drug delivery device in which the drugs are incorporated and is design in such a way that it releases the drug in sustained and at predetermined rate to deliver the drug through the skin to the systemic circulation painlessly. The aim of this research study was to formulate a controlled and sustained release transdermal matrix type patch of Methimazole. The matrix patch was prepared by solvent casting method using a various polymer in different concentration, HPMC (hydrophilic), Eudragit RL100 and Ethyl cellulose (hydrophobic) polymer. Total 9 prototype formulation were prepared and it was subjected for various evaluation test; weight uniformity, Folding endurance, thickness, Drug content, percent moisture content, percent Moisture uptake and In-vitro drug release study using Franz diffusion cell. The in-vitro CDR% data was fit into kinetics model to see the release kinetics from the patches. The Formulation F5 was choosen as a best formulation according to in-vitro drug release study. The in-vitro release was found 81.12 % in 12 hours, it followed zero order kinetics. The nature of polymer and concentration ratio of polymers plays a crucial role for obtaining a good transdermal patch design; therefore optimisation is very important step to formulate a desired TDDS. Therefore the result of the study encourages a further study and is hopeful that the present study would contribute to the recent pharmaceutical research for formulation development.

Sign in / Sign up

Export Citation Format

Share Document