scholarly journals Design and Assembly of Multipurpose Gizmo

2021 ◽  
Vol 9 (VII) ◽  
pp. 308-311
Author(s):  
Desai Krushna. M
Keyword(s):  
Solar Energy ◽  
Electrical Energy ◽  
Research Paper ◽  
Chemical Energy ◽  
Building Sector ◽  
Component Selection ◽  
Different Types ◽  
Communication Sector ◽  
Published Research ◽  
Multipurpose Machines

Nowadays in every sector around the word from agriculture to automobile, building sector, communication sector are widely using different types of Robots. today we use various spraying technologies involving electrical energy, chemical energy and fuels. this fact makes us know that how large content of energy is getting used at such a places. This research paper prepared by studying previously published research paper on design of multipurpose machines. This paper reviewed the previous spraying machines The method used in this design is the most optimal component selection. The result of this study is a multipurpose organic machine (Gizmo) prototype with a capacity of 10 litter /h . able to spraying liquid up to 1200 sq. fit. to 1500 sq. fit, and can be operated easily by the user using mobile. With the help of solar energy.

DEVICE FOR CONVERTING SOLAR ENERGY INTO ELECTRICAL ENERGY, AS WELL AS FOR ACCUMULATING AND STORING ENERGY BY MEANS OF MOLTEN SALT (PROJECT)

2020 ◽  
Vol 6 (3) ◽  
pp. 53-57
Author(s):  
A. T. Abdukadirov ◽  
◽  
A. A. Shodiev
Keyword(s):  
Energy Source ◽  
Renewable Energy Source ◽  
Renewable Energy ◽  
Solar Energy ◽  
Molten Salt ◽  
Electrical Energy ◽  
Special Significance

This article describes the project of a device proposed by the authors for converting solar energy into electrical energy, as well as for accumulating and storing energy through molten salt. It describes the main details and principle of operation of this device and its special significance in the field of energy as a renewable energy source, which has the highest efficiency

scholarly journals Improved Thermal Transfer Efficiency for Planar Solar Thermophotovoltaic Devices

2013 ◽  
Author(s):  
David M. Bierman ◽  
Andrej Lenert ◽  
Evelyn N. Wang
Keyword(s):  
Solar Energy ◽  
Solar Spectrum ◽  
Electrical Energy ◽  
Photovoltaic Cell ◽  
Area Ratio ◽  
Transfer Efficiency ◽  
System Level ◽  
Surface Geometry ◽  
Thermal Transfer ◽  
Absorber Surface

Solar thermophotovoltaic (STPV) devices provide conversion of solar energy to electrical energy through the use of an intermediate absorber/emitter module, which converts the broad solar spectrum to a tailored spectrum that is emitted towards a photovoltaic cell [1]. While the use of an absorber/emitter device could potentially overcome the Shockley-Queisser limit of photovoltaic conversion [2], it also increases the number of heat loss mechanisms. One of the most prohibitive aspects of STPV conversion is the thermal transfer efficiency, which is a measure of how well solar energy is delivered to the emitter. Although reported thermophotovoltaic efficiencies (thermal to electric) have exceeded 10% [3], [4], previously measured STPV conversion efficiencies are below 1% [5], [6], [7]. In this work, we present the design and characterization of a nanostructured absorber for use in a planar STPV device with a high emitter-to-absorber area ratio. We used a process for spatially-selective growth of vertically aligned multi-walled carbon nanotube (MWCNT) forests on highly reflective, smooth tungsten (W) surfaces. We implemented these MWCNT/W absorbers in a TPV system with a one-dimensional photonic crystal emitter, which was spectrally paired with a low bandgap PV cell. A high fidelity, system-level model of the radiative transfer in the device was experimentally validated and used to optimize the absorber surface geometry. For an operating temperature of approximately 1200 K, we experimentally demonstrated a 100% increase in overall STPV efficiency using a 4 to 1 emitter-to-absorber area ratio (relative to a 1 to 1 area ratio), due to improved thermal transfer efficiency. By further increasing the solar concentration incident on the absorber surface, increased emitter-to-absorber area ratios will improve both thermal transfer and overall efficiencies for these planar devices.

Research on Steric and Multilevel Concentrator for Photovoltaic Generation

2012 ◽  
Vol 608-609 ◽  
pp. 65-69
Author(s):  
Xiao Fan Yang ◽  
Zhi Long Xu ◽  
Chao Li ◽  
Zhong Ming Huang
Keyword(s):  
Power Generation ◽  
Solar Energy ◽  
Electrical Energy ◽  
Development Trend ◽  
Energy Utilization ◽  
Price Ratio ◽  
Photovoltaic Generation ◽  
Photovoltaic Power ◽  
Operating Factor ◽  
And Performance

As the development trend of solar energy, which is a green way of energy utilization, photovoltaic power generation has been a research hotspot of solar energy utilization technologies. Using the concentrating and tracking technology to increase the illumination intensity, and obtain more electrical energy, that will reduce the cost of the photovoltaic power generation system sharply. A kind of steric and multilevel concentrator for photovoltaic generation is introduced in this paper, whose concentration ratio is 3. The operating factor of plane mirrors and performance price ratio of the system is increased for optimizing the condensation parameters and structure of the concentrator.

scholarly journals Electrical system design of solar powered electrical recreational boat for Indonesian waters

2018 ◽  
Vol 67 ◽  
pp. 04011
Author(s):  
Sunaryo Sunaryo ◽  
Adri Wirawan Ramadhani
Keyword(s):  
Solar Energy ◽  
Fossil Fuel ◽  
Electrical Power ◽  
Electrical Energy ◽  
Green Energy ◽  
Solar Panels ◽  
Electrical System ◽  
Literature Study ◽  
The Government ◽  
Solar Powered

Indonesia has more than 17,000 islands and has plenty of beautiful beaches and underwater spots which have great potential for maritime tourism. Tourism was ranked 3rd on Indonesia's foreign income and plays an important role for the country’s ecomony. Despite having potential advantages, the government has not yet maximized its efforts to develop the attractiveness of its maritime tourism. Beside the beautiful spots Indonesia is also blessed with all year long sun shine, which could be tapped as renewable and green energy as substitution to fossil fuel. Refer to these great advantages of natural resources the research was aimed to support the government’s program in developing its maritime tourism and to promote the use of green and renewable energy by designing a solar-powered tourism recreational boat which has 12 meters of length. The paper is focused on the design of solar energy and its electrical system, which includes conversion of solar energy to electrical energy and store it in the battery, the required electrical power is also predicted based on the appliances and equipment installed in the boat, the optimum attachment of solar panels on the boat structure is also calculated. All the methods and information we use are obtained from literature study, discussion with experts, and surveys to Jagur as solar-powered electric boat from Universitas Indonesia.

Parabolic Solar Collector Coverage Made of High-Performance Concrete with Addition of Active Rice Husk Silica Integrated to a Biomass Thermoelectric Unit

2014 ◽  
Vol 634 ◽  
pp. 72-82
Author(s):  
Rosa Ana Conte ◽  
Daltro Garcia Pinatti ◽  
Luiz Fernando M. Marton ◽  
Sebastião Ribeiro ◽  
Thaís Witt Acosta ◽  
...  
Keyword(s):  
Solar Energy ◽  
Rice Husk ◽  
Solar Collector ◽  
High Performance ◽  
High Performance Concrete ◽  
Electrical Energy ◽  
Energy Generation ◽  
Boiler Water ◽  
Rice Husk Silica ◽  
Short Rotation

Production of active rice husk silica (ARHS) in bubbling fluidized bed boiler of a thermoelectric unit (TEU) and its addition to high performance concrete (HPC) with a compression resistance of 90 MPa was developed in the last 10 years. A first factory in Brazil was established at Alegrete town, RS, and other factories are under planning. Data of ARHS production, specification and HPC trace are presented. Design of parabolic solar collector coverage (PSCC) for air heating for biomass drying in a special silo of the TEU is presented as well. Cost of HPC/ARHS is 10 times less than steel (USD 200/ton vs. USD 2000/ton, specific mass 2.5 vs. 7.6 g/cm3, respectively). Those characteristics allow simultaneous solution of four ecological problems: large span coverage, rain water collection, daily solar energy collection and storage, and drying of biomass. The integration of those characteristics results in decrease of biomass consumption maintaining the same UTE efficiency. Tracking parabolic solar collector can be avoided between Cancer and Capricorn Tropics, and it is sufficient its eastern-western orientation with inclination to the Equator by the latitude angle. Coverage of the area occupied by TEU is sufficient to dry its biomass consumption. Preheating of boiler water with solar energy is possible decreasing biomass consumption in sunny days; biomass is partially consummed at night and cloudy days. Coupling the above technologies with high pressure steam TEU and fast-growing short-rotation forest gives to the biomass electrical energy generation a competitive economical position with hydraulic, coal, natural gas, and aeolic energy generation.

Combination of Biological Processes and Fuel Cells to Harvest Solar Energy

2008 ◽  
Vol 5 (3) ◽  
Author(s):  
Dieter F. Ihrig ◽  
H. Michael Heise ◽  
Ulrich Brunert ◽  
Martin Poschmann ◽  
Ruediger Kuckuk ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Fuel Cells ◽  
Solar Energy ◽  
Anaerobic Fermentation ◽  
Algal Cell ◽  
Electrical Energy ◽  
Dry Mass ◽  
Solar Energy Harvesting ◽  
First Results ◽  
Continuous Feeding

Biomass production by micro-algae is by a factor of 10 more efficient than by plants, by which an economic process of solar energy harvesting can be established. Owing to the very low dry mass content of algal suspensions, the most promising way of their conversion to a high exoergic and transportable form of energy is the anaerobic production of biogas. On account of this, we are developing such processes including a micro-algal reactor, methods for micro-algal cell separation and biomass treatment, and a subsequent two-stage anaerobic fermentation process. First results from parts of this development work are shown. The continuous feeding of the anaerobic process over several weeks using micro-algal biomass is discussed in more details. The biogas is composed of methane, higher hydrocarbons, carbon dioxide, and hydrogen sulphide. Using steam reforming, it can be converted to a mixture of carbon dioxide and hydrogen. These gases can be separated using membrane technology. It is possible to form a closed carbon cycle by recycling the carbon dioxide to the micro-algal process. The transportable and storable hydrogen product is a valuable energy source and can be converted to electrical energy and heat using fuel cells. The simulation of such a process will be explicated.

scholarly journals Effects of Aerosols and Clouds on the Levels of Surface Solar Radiation and Solar Energy in Cyprus

2021 ◽  
Author(s):  
Ilias Fountoulakis ◽  
Panagiotis Kosmopoulos ◽  
Kyriakoula Papachristopoulou ◽  
Panagiotis-Ioannis Raptis ◽  
Rodanthi-Elisavet Mamouri ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Renewable Energy Sources ◽  
Financial Loss ◽  
Low Latitude ◽  
High Quality ◽  
Surface Solar Radiation ◽  
Satellite Retrievals ◽  
Different Types ◽  
Fine Resolution

Cyprus plans to drastically increase the share of renewable energy sources from 13.9% in 2020 to 22.9% in 2030. Solar energy can play a key role in the effort to fulfil this goal. The potential for production of solar energy over the island is much higher than most of European territory because of the low latitude of the island and the nearly cloudless summers. In this study, high quality and fine resolution satellite retrievals of aerosols and dust, from the newly developed MIDAS climatology, as well as information for clouds from CMSAF are used in order to quantify the effects of aerosols, dust, and clouds on the levels of surface solar radiation (SSR) and the corresponding financial loss for different types of installations for production of solar energy. An SSR climatology has been also developed based on the above information. Ground-based measurements were also incorporated to study the contribution of different species to the aerosol mixture and the effects of day-to-day variability of aerosols on SSR. Aerosols attenuate 5 – 10% of annual GHI and 15 – 35% of annual DNI, while clouds attenuate ~25 – 30% and 35 – 50% respectively. Dust is responsible for 30 – 50% of the overall attenuation by aerosols.

scholarly journals Investigation of monthly variations in the efficiencies of photovoltaics due to sunrise and sunset times

2020 ◽  
Vol 18 (1) ◽  
pp. 310
Author(s):  
Armstrong O. Njok ◽  
Julie C. Ogbulezie ◽  
Manoj Kumar Panjwani ◽  
Raja Masood Larik
Keyword(s):  
Relative Humidity ◽  
Solar Energy ◽  
Electrical Energy ◽  
Time Of Day ◽  
Peak Efficiency ◽  
Pv Module ◽  
Average Relative Humidity ◽  
The Difference ◽  
Monthly Variations ◽  
Different Levels

<p>The effect of time of day and month on the efficient conversion of solar energy to electrical energy using a polycrystalline (PV) module in calabar was studied. A KT-908 precision digital hygrometer and thermometer, and a M890C+ digital multimeter were used in the process. Results obtained shows that photovoltaic produce different levels of peak efficiencies at different times of the day for different months due to the difference in sunrise and sunset times for the months. The results also indicated that photovoltaics will be more efficient in months with low average relative humidity couple with low panel temperature. A peak efficiency of 77% at 12:30 in the month of April was observed before dropping to 73% at 12:00 in the month of May, indicating that there might be further drop in efficiency as we proceed further into the year. Results also show that photovoltaics are more efficient before noon in the month of May than in April while the reverse will be observed in the afternoon. </p>

Sign in / Sign up

Export Citation Format

Share Document