scholarly journals Destruction of buildings and use of materials from renovated urban territories

Vestnik MGSU ◽  
2020 ◽  
pp. 271-293 ◽  
Author(s):  
Sergey A. Kolodyazhny ◽  
Sergei N. Zolotukhin ◽  
Anatoly A. Abramenko ◽  
Yekaterina A. Artemova
Keyword(s):  
Construction Materials ◽  
Actual Problem ◽  
Environment Friendly ◽  
Environmental Friendliness ◽  
Urban Territories ◽  
Theoretical Generalization ◽  
Pros And Cons ◽  
The Cost ◽  
Building Demolition

Introduction. Reuse of construction materials, products, and structures from demolished buildings and installations is an actual problem. The solution to it will improve the ecological situation. The study is aims at the determination of the causes of urban area renovation and searches for the most efficient technologies of building demolition with the reuse of the generated materials, products, and structures. Materials and methods. The study used systematization, structural analysis, comparative analysis, a theoretical generalization of the data obtained in a detailed analysis of literary and statistical sources, field surveys of objects. When field examining, photography methods were used. Results. Existing technologies of the building demolition, construction waste recovery, and reuse of construction materials generated using innovative item-by-item demolition technologies were revealed and systematized. Causes and main trends of urban territory renovation were analyzed. The paper studied Russian and foreign technologies of the building and installation demolition. The pros and cons of various demolition types are shown in terms of their environmental friendliness and economic efficiency. Conclusions. The experience of constructing low-rise buildings and intrasettlement roads showed that the item-by-item disassembly of buildings using modern equipment and machinery with the subsequent reuse of construction materials, products, and structures is efficient, economical, and environment-friendly. It is proven that the reuse of construction materials, products, and structures results in a significant reduction in the cost of erected installations. The results of the study can be applied in low-rise construction around the world.

Mekanisme Dan Proteksi Jaminan Nasabah Pada Gadai Informal

Liquidity ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 103-109
Author(s):  
Yuri Nanda Larasati ◽  
Jafril Khalil
Keyword(s):  
Qualitative Research ◽  
Research Methods ◽  
Financial Services ◽  
Field Data ◽  
Qualitative Research Methods ◽  
Research Field ◽  
Consumer Society ◽  
Library Research ◽  
The Cost

Regulation of the financial services authority (OJK) No. 31/POJK.05/2016 on Venture had arranged that the financial services agency on the basis of the law of pledge is in coaching and supervision OJK. Yet the existence of laws – invitation to Governing Enterprise pawn shops causing business activities conducted by the above parties are not yet regulated. The condition is feared could cause harm to the consumer society. The purpose of this research is to know the procedures, mechanisms, protection of goods and guarantee the consumer on an informal pledge financing, methods of determination of the cost of maintenance of the goods and the goods of the execution mechanism of the pledge as well as protection for the collateral items are viewed from the side of the consumer by looking at laws-invitations and Sharia. To find out whether the pledge have gotten permission from OJK. This research uses qualitative research methods with the study of library research, field data and simulations. The approach used in this study is the empirical juridical approach. Elaboration upon the results is discussed further in this article.

THE FACTORS OF CAREER SELF-DETERMINATION OF STUDENTS OF HIGHER EDUCATION INSTITUTIONS

2019 ◽  
Vol 7 (1) ◽  
pp. 9-20
Author(s):  
Inna Yeung
Keyword(s):  
Higher Education ◽  
Higher Education Institutions ◽  
Well Being ◽  
Young Person ◽  
Self Determination ◽  
Full Time ◽  
Actual Problem ◽  
The Third ◽  
The Right

Choice of profession is a social phenomenon that every person has to face in life. Numerous studies convince us that not only the well-being of a person depends on the chosen work, but also his attitude to himself and life in general, therefore, the right and timely professional choice is very important. Research about factors of career self-determination of students of higher education institutions in Ukraine shows that self-determination is an important factor in the socialization of young person, and the factors that determine students' career choices become an actual problem of nowadays. The present study involved full-time and part-time students of Institute of Philology and Mass Communications of Open International University of Human Development "Ukraine" in order to examine the factors of career self-determination of students of higher education institutions (N=189). Diagnostic factors of career self-determination of students studying in the third and fourth year were carried out using the author's questionnaire. Processing of obtained data was carried out using the Excel 2010 program; factorial and comparative analysis were applied. Results of the study showed that initial stage of career self-determination falls down on the third and fourth studying year at the university, when an image of future career and career orientations begin to form. At the same time, the content of career self-determination in this period is contradictory and uncertain, therefore, the implementation of pedagogical support of this process among students is effective.

The Awareness Level of the Safety and Health of the Operational Level

2017 ◽  
Vol 3 (1) ◽  
pp. 42
Author(s):  
Roshanira Che Mohd Noor ◽  
Nur Atiqah Rochin Demong
Keyword(s):  
Health And Safety ◽  
Health Conditions ◽  
Effective Strategies ◽  
Operational Level ◽  
Safety And Health ◽  
Health Factors ◽  
The Cost ◽  
The Relationship ◽  
Awareness Level

Providing a safe and healthy workplace is one of the most effective strategies in for holding down the cost of doing construction business. It was a part of the overall management system to facilitate themanagement of the occupational health and safety risk that are associated with the business of the organization. Factors affected the awareness level inclusive of safety and health conditions, dangerous working area, long wait care and services and lack of emergency communication werethe contributed factors to the awareness level for the operational level. Total of 122 incidents happened at Telekom Malaysia Berhad as compared to year 2015 only 86 cases. Thus, the main objective of this study was to determine the relationship between safety and health factors and the awareness level among operational workers.The determination of this research was to increase the awareness level among the operational level workerswho committing to safety and health environment.

ANALISIS PERHITUNGAN HARGA POKOK PRODUKSI DAN PENENTUAN HARGA JUAL ATAS PRODUK (Studi Kasus Pada PT Dasa Windu Agung)

2016 ◽  
Vol 1 (2) ◽  
pp. 183-190
Author(s):  
Dwi Urip Wardoyo
Keyword(s):  
Manufacturing Industry ◽  
Sampling Method ◽  
Manufacturing Companies ◽  
Test Analysis ◽  
Automotive Components ◽  
Convenience Sampling ◽  
Cost Of Production ◽  
The Cost ◽  
Keywords Cost

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing

Determination of the minimum number of technological bases of a part

2020 ◽  
pp. 73-75
Author(s):  
B.M. Bazrov ◽  
T.M. Gaynutdinov
Keyword(s):  
Cost Price ◽  
Labor Input ◽  
Part Surface ◽  
Technological Base ◽  
Size Accuracy ◽  
Minimum Number ◽  
The Cost ◽  
Input Cost ◽  
Selection Of

The selection of technological bases is considered before the choice of the type of billet and the development of the route of the technological process. A technique is proposed for selecting the minimum number of sets of technological bases according to the criterion of equality in the cost price of manufacturing the part according to the principle of unity and combination of bases at this stage. Keywords: part, surface, coordinating size, accuracy, design and technological base, labor input, cost price. [email protected]

Determination of load restoration sequence taking into account the cost of electric service interruption

1981 ◽  
Vol 101 (1) ◽  
pp. 98-106
Author(s):  
Koichi Nara ◽  
Susumu Yamashiro ◽  
Toichiro Koike
Keyword(s):  
Service Interruption ◽  
The Cost

scholarly journals Machine Learning Approaches for Prediction of the Compressive Strength of Alkali Activated Termite Mound Soil

2021 ◽  
Vol 11 (11) ◽  
pp. 4754
Author(s):  
Assia Aboubakar Mahamat ◽  
Moussa Mahamat Boukar ◽  
Nurudeen Mahmud Ibrahim ◽  
Tido Tiwa Stanislas ◽  
Numfor Linda Bih ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Construction Materials ◽  
Curing Temperature ◽  
Sustainable Construction ◽  
Support Vector ◽  
Learning Approaches ◽  
Artificial Neural Network Ann ◽  
Curing Regime ◽  
Alkali Activated

Earth-based materials have shown promise in the development of ecofriendly and sustainable construction materials. However, their unconventional usage in the construction field makes the estimation of their properties difficult and inaccurate. Often, the determination of their properties is conducted based on a conventional materials procedure. Hence, there is inaccuracy in understanding the properties of the unconventional materials. To obtain more accurate properties, a support vector machine (SVM), artificial neural network (ANN) and linear regression (LR) were used to predict the compressive strength of the alkali-activated termite soil. In this study, factors such as activator concentration, Si/Al, initial curing temperature, water absorption, weight and curing regime were used as input parameters due to their significant effect in the compressive strength. The experimental results depict that SVM outperforms ANN and LR in terms of R2 score and root mean square error (RMSE).

scholarly journals The Application of Electromagnetic Sensors for Determination of Cherenkov Cone Inside and in the Vicinity of the Detector Volume in Any Environment Known

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 992
Author(s):  
Valeriu Savu ◽  
Mădălin Ion Rusu ◽  
Dan Savastru
Keyword(s):  
Energy Levels ◽  
Cherenkov Detector ◽  
Electromagnetic Sensors ◽  
The Cost ◽  
Information Errors ◽  
The Universe ◽  
Large Frequency ◽  
Very High ◽  
Detector Volume

The neutrinos of cosmic radiation, due to interaction with any known medium in which the Cherenkov detector is used, produce energy radiation phenomena in the form of a Cherenkov cone, in very large frequency spectrum. These neutrinos carry with them the information about the phenomena that produced them and by detecting the electromagnetic energies generated by the Cherenkov cone, we can find information about the phenomena that formed in the universe, at a much greater distance, than possibility of actually detection with current technologies. At present, a very high number of sensors for detection electromagnetic energy is required. Thus, some sensors may detect very low energy levels, which can lead to the erroneous determination of the Cherenkov cone, thus leading to information errors. As a novelty, we propose, to use these sensors for determination of the dielectrically permittivity of any known medium in which the Cherenkov detector is used, by preliminary measurements, the subsequent simulation of the data and the reconstruction of the Cherenkov cone, leading to a significant reduction of problems and minimizing the number of sensors, implicitly the cost reductions. At the same time, we offer the possibility of reconstructing the Cherenkov cone outside the detector volume.

Sign in / Sign up

Export Citation Format

Share Document