scholarly journals Distribution of Vascular Bundles and Physical Properties Analysis of Variety DxP Oil Palm Trunk Based on Various Zones and Trunk Heights

2020 ◽  
Vol 28 (1) ◽  
pp. 1-14
Author(s):  
Ayu Wulandari ◽  
Erwinsyah Erwinsyah
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Oil Palm ◽  
Peripheral Zone ◽  
Vascular Bundles ◽  
Board Density ◽  
Oil Palm Trunk ◽  
Average Value ◽  
Regression Test

In an attempt to obtain a homogenous board density from the palm trunk, this research was carried out to analyze the distribution of vascular bundles and the physical properties of the oil palm trunk (moisture content, density, and specific gravity) in various zones and trunk heights. Oil palm trunk samples were used from 29 years old palm (Planted on 1991) which acquired from Aek Pancur Experimental plantation, Indonesian Oil Palm Research Institute (IOPRI). The oil palm trunk sample was cut based on the trunk zones (peripheral, central, and inner), and trunk heights (1, 2, 3, 4, 5, 6, 7 m). The observed parameters were vascular bundles, moisture content, density, and specific gravity. The results showed that the highest number of vascular bundles in the peripheral zone (73.66 vb/cm2). In addition that, the highest density and specific gravity also found in peripheral zone with an average 0,73 gram/cm3  and 0.53, whereas the highest moisture content was found in the inner zone with an average value 141%(w/w). Furthermore, the statistical analysis ((ANOVA and regression test (R2)) in this study showed that the trunk zone factor was more significant than the trunk height for all observed parameters (distribution of vascular bundles, moisture content, density and specific gravity).

scholarly journals Pengaruh Penambahan Abu Arang Tempurung Kelapa Pada Tanah Lempung Terhadap Hasil Uji Kompaksi

2021 ◽  
Vol 3 (2) ◽  
pp. 276-285
Author(s):  
Brigita Suzanna ◽  
Irwan Lie Keng Wong ◽  
Monika Datu Mirring Palinggi
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Clay Soil ◽  
Test Method ◽  
Coconut Shell ◽  
Dry Density ◽  
Coconut Shell Ash ◽  
American Society ◽  
Index Value

The purpose of this research is to determine the physical properties of clay soil and to analyze the effect of adding coconut shell charcoal ash to the clay soil. The soil samples used in this study came from Tanralili District, Maros Regency, two sample points were taken and the variations in the levels of addition of coconut shell charcoal ash is 0%, 4%, 6%, 8%, 10%. The test method used refers to ASTM (American Society for Testing Materials). The tests carried out were testing the physical properties of the soil in the form of moisture content, specific gravity, Atterberg boundaries, filter analysis, and hydrometer analysis, then a compaction test was carried out to determine the maximum soil density. The results of the test obtained a moisture content value of 28.811%, a specific gravity of 2.58 g / cm3 so that it is classified as organic clay. As well as the plasticity index value of 9.926% with moderate plasticity from the 7% -17% interval. Then from the test results of soil compaction testing with the addition of coconut shell ash, the dry density (gdry) equal to 0.862, 0.886, 0.914, 0.943, 0.962, this means that the soil sample experienced an increase in dry density (gdry) of 11.60%. From the research results it can be concluded that the addition of coconut shell charcoal ash can increase the value of soil dry density so that it can be used to increase the value of the carrying capacity of clay soil.

scholarly journals Physical properties of sessile oak (quercus petraea l) used by the wood industry in Kosovo

2020 ◽  
Vol 2 (7) ◽  
pp. 278-285
Author(s):  
Rrahim Sejdiu ◽  
Florit Hoxha ◽  
Bujar Jashari ◽  
Lulzim Idrizi
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Radial Direction ◽  
Tangential Direction ◽  
Quercus Petraea ◽  
Sessile Oak ◽  
Content Ratio ◽  
Wet Condition ◽  
Shrinkage Coefficient

The paper shows some physical properties of sessile oak obtained in Kosovo regions. In the study are shown: wood shrinkage, specific gravity, shrinkage coefficient for 1% change of moisture content, ratio of shrinkage in tangential and radial direction etc. The amount of volumetric shrinkage of sessile oak is 15.95%, heartwood part has an average shrinkage 15.41% in The shrinkage of sapwood part is 17.56%. Specific gravity at: wet condition: (1.013gr/cm3); 12% (0.853gr/cm3) and 0% (0.826gr/cm3) of moisture content. Specific gravity of heartwood at: wet condition (1.05gr/cm3); 12% (0.88gr/cm3); 0% (0.85gr/cm3). The specific gravity of sapwood at: wet condition (0.91gr/cm3); 12% (0.77gr/cm3); 0% (0.748gr/cm3). The ratio of average shrinkage between tangential and radial cutting direction is 1.71%. This ratio was significantly higher in sapwood than heartwood. Coefficient of shrinkage (changing 1% of moisture content) in the radial direction is 0.00196, and 0.00323 in tangential direction.  

scholarly journals EFFECT OF VARIATIONS OF BETA VULGARIS EXTRACTS ON MASKING THE BITTER TASTE OF MOMORDICA CHARANTIA EXTRACT SYRUP

2018 ◽  
Vol 10 (1) ◽  
pp. 159
Author(s):  
Sutriyo . ◽  
Raditya Iswandana ◽  
Elisa Nur Widiya
Keyword(s):  
Specific Gravity ◽  
Physical Properties ◽  
Beta Vulgaris ◽  
Sodium Benzoate ◽  
Bitter Taste ◽  
Momordica Charantia ◽  
The Other ◽  
Bitter Melon ◽  
Average Value

Objective: This study aimed to obtain a formula with an optimal sweetener concentration of beet extract that can cover the bitter taste of bitter melonand confer optimal physical properties on the syrup.Methods: The syrups were prepared by mixing bitter melon extract, sucrose, beet extract, sorbitol, sodium benzoate, strawberry essence, anddemineralized water. The control formula and formulas 1, 2, and 3 contained beet extract at concentrations of 0% and 10%, 15%, and 20%, respectively.All formulas were evaluated to determine their physical properties, stability, and bitterness. The bitterness was tested on 30 respondents, with databeing analyzed using Wilcoxon’s test on SPSS software.Results and Conclusion: Formula 3 with 20% beet extract was identified as the best formula for masking bitter taste because it had a significantlybetter average value than the other formulas (p<0.05) and the highest bitterless taste percentage (86.67%), with physical properties of a brownishblackcolor, odor of mixture of strawberry and dominant beet, a sweet and dominant beet taste, pH 5.46, and specific gravity of 1.228 g/mL.

scholarly journals SIFAT FISIK BATANG DAN CABANG KAYU MAKADAMIA

PERENNIAL ◽  
2006 ◽  
Vol 2 (1) ◽  
pp. 16
Author(s):  
Andi Detti Yunianti
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Quality Indicators ◽  
Basic Density ◽  
Raw Material ◽  
Longitudinal Shrinkage ◽  
Wood Production ◽  
Efficient Utilization ◽  
Tangential Shrinkage

Since there have been a big difference between wood production and industrial need, wood diversification plays an important role in handling wood deficiencies. Wood raw material diversification could developed and increased throughout the use of whole parts of the tree including branch. The current study was aimed at understanding stem and branch physical properties (basic density, air-dry specific gravity, air-dry moisture content and shrinkage) of macadamia wood as quality indicators for efficient utilization in the future. For the purpose of the study, parts of stem and branch of the tree were taken from a macadamia tree. Test specimens of stem were cut 50 cm from the ground while that of branch were selected from the largest diameter at 10 cm distance from the main stem of the tree. All samples were tested for their physical properties according to ISO standards, 1975. Results showed that the basic density, air dry specific gravity and longitudinal shrinkage of the branchwood of macadamia were higher than those of the stem. The air-dry moisture content, radial and tangential shrinkage were low on the branchwood. Keywords : Wood Physical Properties, Branchwood , Macadamia Wood

scholarly journals The Physical Properties and Geochemical of Clay from the Bestari Jaya, Kuala Selangor, Selangor, Malaysia for Potential Usage

2020 ◽  
Vol 5 (10) ◽  
pp. 1231-1236
Author(s):  
M. R. Umor ◽  
A. Hussin ◽  
N. Muda
Keyword(s):  
Specific Gravity ◽  
Physical Properties ◽  
Paper Industry ◽  
Xrd Analysis ◽  
Commercial Application ◽  
Average Value ◽  
Plasticity Limit ◽  
Pedestrian Traffic ◽  
L Value ◽  
Almost All

The study emphasis on physical properties and geochemical of the clays from Bestari Jaya area to determine its suitability for any commercial application. Nine samples collected from six boreholes as representative of white and dark clay in the study area. All samples examined through the optical properties test and physical properties such as moisture, specific gravity, Atterberg limit and particle size distributions. The geochemical and mineralogical conducted using XRF and XRD analysis. The clays from Bestari Jaya considered of having variation in the brightness from medium to high brightness as shown by Delta L value (51.32-73.49%). The moisture content ranges between 34.50-81.03%. The plasticity index (PI) and plasticity limit (PL) values found in ranges of 18-32% with an average of 22.22%, and 32-46% with an average of 37.11% respectively. The plasticity limit and index reveals that the Bestari Jaya clays can be classify as kaolinite clays that are suitable for pottery and brick making. The specific gravity ranges between 2.49 – 2.70 with an average of 2.61. The average value is similar to the value of pure china clay (2.6). The SiO2 content in Bestari Jaya clays is between 37.49 – 69.96 wt% and Al2O3 is between 18.92 – 33.02 wt%. While the L.O.I values are between 8.71-16.04%. Kaolinite as the dominant mineral phases in all clay samples with composition ranges from 65-97.7% and an average of 73.12%. Apart of that, quartz in ranges of 5.3 – 20.6%, identified in almost all samples. Muscovite, hematite and magnetite occur as accessory minerals. Referring to standard and result obtained on representative sample, the Bestari Jaya clays potentially used in the production of smaller tiles for unexclusive pedestrian traffic. The presence of significance amount of heavy metals makes it unsuitable to use in the pharmaceutical or paper industry.

scholarly journals Performance Evaluation of Particleboard Using Vascular Bundles Separated from Oil Palm Trunk

2020 ◽  
Vol 69 (6) ◽  
pp. 434-439
Author(s):  
Hiroaki HORIYAMA ◽  
Keisuke KOJIRO ◽  
Yuka MIYOSHI ◽  
Ryohei TANAKA ◽  
Takafumi ITOH ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Oil Palm ◽  
Vascular Bundles ◽  
Oil Palm Trunk

Modulus of Elasticity of Schizolobium amazonicum Wood Evaluated by Transversal Vibration Technique

2014 ◽  
Vol 912-914 ◽  
pp. 247-250 ◽  
Author(s):  
Diego Henrique de Almeida ◽  
Raquel Schmitt Cavalheiro ◽  
Fabiane Salles Ferro ◽  
Tiago Hendrigo de Almeida ◽  
André Luis Christoforo ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Specific Gravity ◽  
Moisture Content ◽  
Transverse Vibration ◽  
Modulus Of Elasticity ◽  
Low Density ◽  
Average Value ◽  
Vibration Technique ◽  
Small Incidence ◽  
Vibration Tests

Schizolobium amazonicum is being much used in Brazil for several purposes because, besides being a native Brazilian wood specie, has important features such as low density and small incidence of natural defects. At this point, researches with the purpose of obtaining further knowledge of their properties are being conducted to better targeting their use. The aim of this research is to evaluate the modulus of elasticity of structural size pieces of Schizolobium amazonicum wood using the technique of transverse vibration. Tests were carried out using 30 pieces (standard moisture content 12%) with sizes of 3 cm x 15 cm x 2.5 m. The average value of elastic modulus determined for lumber of Schizolobium amazonicum was interesting to its low specific gravity.

scholarly journals Determination of Physico-chemical properties of selected tropical timbers in Anambra State, South Eastern Nigeria

2021 ◽  
Vol 46 (2) ◽  
Author(s):  
G.C NWANISOBI ◽  
C. EJIKEME EZECHI ◽  
C. U OKEKE
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Physical Properties ◽  
Cold Water ◽  
Chemical Constituents ◽  
Chemical Properties ◽  
Anambra State ◽  
Physico Chemical ◽  
Porosity Index

The analyses on chemical properties of some tropical timbers have been studied. The physical properties of these timbers varied in the pH(4.26 – 6.85) , moisture content(13%-37%), specific gravity(0.16-0.45), charring temperature (61 – 116o C)and porosity index(1.17-2.08%).Also the solubility behaviors of these timbers were mostly insoluble in hot and cold water, NaOH and ethanol and slightly soluble in concentrated HCl and H2SO4 respectively. The Qualitative results show heavy presence of flavonoids, saponins, tannis, glycosides, steroids and terpenoids in some of the timbers.Quantitative determinations were carried out and results show that the woods contain chemical constituents which are useful to both humans and industries.

Sign in / Sign up

Export Citation Format

Share Document