scholarly journals Physiological shear stress enhances differentiation and mucus-formation of intestinal epithelial cells in vitro.

Author(s):  
Marcus Lindner ◽  
Anna Laporte ◽  
Stephan Block ◽  
Laura Elomaa ◽  
Marie Weinhart

The gastrointestinal (GI) mucus layer plays a pivotal role in tissue homoeostasis and functionality of the gut. However, due to the shortage of affordable, realistic in vitro mucus models, studies with deeper insights into its structure and characteristics are rare. To obtain an improved mucus model, we developed a reusable culture chamber facilitating the application of physiologically relevant GI shear stresses (0.002-0.08 dyn/cm) to cells in a bioreactor system. Differentiation of a confluent monolayer of human mucus-producing epithelial HT29-MTX cells was monitored under dynamic and static culture conditions. Cells under flow remained highly proliferative and analysis via confocal microscopy revealed superior reorganization into 3-dimensional villi-like structures compared to static culture (up to 120 vs. 80 µm in height). Additionally, the median mucus thickness was significantly increased under dynamic conditions compared to static culture (41±14 vs. 29±14 µm) with a simultaneous drastic reduction of culture time from three to two weeks for sufficient maturation into goblet-like cells. We demonstrated the impact of culture conditions on the differentiation of HT29-MTX cells, revealing outstanding in vivo like reorganization of cells and the production of thick adherent mucus networks when cultured under physiological shear stress using our newly designed culture chamber.

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kornphimol Kulthong ◽  
Guido J. E. J. Hooiveld ◽  
Loes Duivenvoorde ◽  
Ignacio Miro Estruch ◽  
Victor Marin ◽  
...  

AbstractGut-on-chip devices enable exposure of cells to a continuous flow of culture medium, inducing shear stresses and could thus better recapitulate the in vivo human intestinal environment in an in vitro epithelial model compared to static culture methods. We aimed to study if dynamic culture conditions affect the gene expression of Caco-2 cells cultured statically or dynamically in a gut-on-chip device and how these gene expression patterns compared to that of intestinal segments in vivo. For this we applied whole genome transcriptomics. Dynamic culture conditions led to a total of 5927 differentially expressed genes (3280 upregulated and 2647 downregulated genes) compared to static culture conditions. Gene set enrichment analysis revealed upregulated pathways associated with the immune system, signal transduction and cell growth and death, and downregulated pathways associated with drug metabolism, compound digestion and absorption under dynamic culture conditions. Comparison of the in vitro gene expression data with transcriptome profiles of human in vivo duodenum, jejunum, ileum and colon tissue samples showed similarities in gene expression profiles with intestinal segments. It is concluded that both the static and the dynamic gut-on-chip model are suitable to study human intestinal epithelial responses as an alternative for animal models.


Cells ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 2062
Author(s):  
Marcus Lindner ◽  
Anna Laporte ◽  
Stephan Block ◽  
Laura Elomaa ◽  
Marie Weinhart

Gastrointestinal (GI) mucus plays a pivotal role in the tissue homoeostasis and functionality of the gut. However, due to the shortage of affordable, realistic in vitro GI models with a physiologically relevant mucus layer, studies with deeper insights into structural and compositional changes upon chemical or physical manipulation of the system are rare. To obtain an improved mucus-containing cell model, we developed easy-to-use, reusable culture chambers that facilitated the application of GI shear stresses (0.002–0.08 dyn∙cm−2) to cells on solid surfaces or membranes of cell culture inserts in bioreactor systems, thus making them readily accessible for subsequent analyses, e.g., by confocal microscopy or transepithelial electrical resistance (TEER) measurement. The human mucus-producing epithelial HT29-MTX cell-line exhibited superior reorganization into 3-dimensional villi-like structures with highly proliferative tips under dynamic culture conditions when compared to static culture (up to 180 vs. 80 µm in height). Additionally, the median mucus layer thickness was significantly increased under flow (50 ± 24 vs. 29 ± 14 µm (static)), with a simultaneous accelerated maturation of the cells into a goblet-like phenotype. We demonstrated the strong impact of culture conditions on the differentiation and reorganization of HT29-MTX cells. The results comprise valuable advances towards the improvement of existing GI and mucus models or the development of novel systems using our newly designed culture chambers.


Author(s):  
Yu Takahashi ◽  
Yu Inoue ◽  
Keitaro Kuze ◽  
Shintaro Sato ◽  
Makoto Shimizu ◽  
...  

Abstract Intestinal organoids better represent in vivo intestinal properties than conventionally used established cell lines in vitro. However, they are maintained in three-dimensional culture conditions that may be accompanied by handling complexities. We characterized the properties of human organoid-derived two-dimensionally cultured intestinal epithelial cells (IECs) compared with those of their parental organoids. We found that the expression of several intestinal markers and functional genes were indistinguishable between monolayer IECs and organoids. We further confirmed that their specific ligands equally activate intestinal ligand-activated transcriptional regulators in a dose-dependent manner. The results suggest that culture conditions do not significantly influence the fundamental properties of monolayer IECs originating from organoids, at least from the perspective of gene expression regulation. This will enable their use as novel biological tools to investigate the physiological functions of the human intestine.


1997 ◽  
Vol 273 (5) ◽  
pp. H2423-H2427 ◽  
Author(s):  
Jeffrey L. Jasperse ◽  
M. Harold Laughlin

Flow-induced dilation is thought to contribute to dilation of skeletal muscle arteries and arterioles during exercise hyperemia. We sought to determine whether rat soleus feed arteries (SFA) exhibit flow-induced dilation and to evaluate the potential contribution of flow-induced dilation of SFA to exercise hyperemia. Rat SFA were isolated and cannulated to allow pressure and intraluminal flow to be independently controlled. Intraluminal pressure was maintained at 90 cmH2O throughout the experiment. All SFA ( n = 13) developed spontaneous tone and dilated in response to flow. Flow of 10 and 14 μl/min produced a 34 ± 14 and 56 ± 17 μm increase above basal diameter (135 ± 12 μm), respectively. Flows >14 μl/min produced little further dilation. Maximum flow-induced dilation was 86 ± 3% of passive diameter determined in calcium-free physiological saline solution. Calculated shear stress was maintained at 4–6 dyn/cm2 at flows of 10–20 μl/min but increased at greater flows because SFA did not dilate further. To determine whether dilation in response to flows in this range may contribute to exercise hyperemia, we estimated in vivo SFA blood flows from previously published soleus blood flow data. Anesthetized rats are estimated to have flows of 10 μl/min per SFA, and conscious rats are estimated to have flows of 95 (nonexercising), 153 (walking), and 225 (running) μl/min per SFA. Corresponding shear stresses were estimated to be 26 (anesthetized), 47 (conscious, nonexercising), 75 (walking), and 111 (running) dyn/cm2. Because estimated in vivo values for both flow and wall shear stress are far greater than the flow and/or shear stresses at which maximal flow-induced dilation occurs in vitro, we conclude that flow-induced dilation contributes little to dilation of SFA during locomotory exercise.


2021 ◽  
Author(s):  
Alexandre SOUCHAUD ◽  
Arthur BOUTILLON ◽  
Gaëlle CHARRON ◽  
Atef ASNACIOS ◽  
Camille NOÛS ◽  
...  

To investigate the role of mechanical constraints in morphogenesis and development, we develop a pipeline of techniques based on incompressible elastic sensors. These techniques combine the advantages of incompressible liquid droplets, which have been used as precise in situ shear stress sensors, and of elastic compressible beads, which are easier to tune and to use. Droplets of a polydimethylsiloxane (PDMS) mix, made fluorescent through specific covalent binding to a rhodamin dye, are produced by a microfluidics device. The elastomer rigidity after polymerization is adjusted to the tissue rigidity. Its mechanical properties are carefully calibrated in situ, for a sensor embedded in a cell aggregate and submitted to uniaxial compression. The local shear stress tensor is retrieved from the sensor shape, accurately reconstructed through an active contour method. In vitro, within cell aggregates, and in vivo, in the prechordal plate of the Zebrafish embryo during gastrulation, our pipeline of techniques demonstrates its efficiency to directly measure the three dimensional shear stress repartition within a tissue, and its time evolution.


Author(s):  
John H. Slater ◽  
Shailendra Jain ◽  
Robin N. Coger ◽  
Charles Y. Lee

Hypothermic machine perfusion preservation (MPP) has proven to be a successful technique for hypothermic kidney storage, however this technology has not successfully been applied to the liver. Recent research has indicated that the endothelial cells lining the liver sinusoids display rounding phenomena during MPP that is not fully understood. In order to gain a better understanding of endothelial cell shear stress response and the factors that induce rounding, a temperature-controlled micro-shear chamber has been designed and fabricated. The micro-shear chamber has been used to apply shear stresses, corresponding to those imposed during MPP, to rat liver primary endothelial cell cultures in order to form an understanding of how these stresses affect endothelial cell morphology. The chamber allows for the application of shear stresses ranging from 0.2 ± .01 dynes/cm2 to 2.3 ± 0.3 dynes/cm2, corresponding to what occurs during MPP.] Twenty-four hour in vitro experiments with shear stresses ranging from 0 to 1.49 dynes/cm2 at 4 °C were conducted in order to replicate in vivo conditions of the liver during hypothermic MPP. It has been demonstrated that endothelial cell rounding increases with increasing shear and can be prevented by utilizing low flow rates.


2016 ◽  
Vol 28 (8) ◽  
pp. 1185 ◽  
Author(s):  
Luis Baldoceda ◽  
Isabelle Gilbert ◽  
Dominic Gagné ◽  
Christian Vigneault ◽  
Patrick Blondin ◽  
...  

Some embryos exhibit better survival potential to cryopreservation than others. The cause of such a phenotype is still unclear and may be due to cell damage during cryopreservation, resulting from overaccumulation and composition of lipids. In cattle embryos, in vitro culture conditions have been shown to impact the number of lipid droplets within blastomeres. Thus far, the impact of breed on embryonic lipid content has not been studied. In the present study were compared the colour, lipid droplet abundance, lipid composition, mitochondrial activity and gene expression of in vivo-collected Jersey breed embryos, which are known to display poor performance post-freezing, with those of in vivo Holstein embryos, which have good cryotolerance. Even when housed and fed under the same conditions, Jersey embryos were found to be darker and contain more lipid droplets than Holstein embryos, and this was correlated with lower mitochondrial activity. Differential expression of genes associated with lipid metabolism and differences in lipid composition were found. These results show genetic background can impact embryonic lipid metabolism and storage.


2021 ◽  
Author(s):  
Claire A. Dessalles ◽  
Clara Ramón-Lozano ◽  
Avin Babataheri ◽  
Abdul I. Barakat

AbstractIn the microvasculature, blood flow-derived forces are key regulators of vascular structure and function. Consequently, the development of hydrogel-based microvessel-on-chip systems that strive to mimic the in vivo cellular organization and mechanical environment has received great attention in recent years. However, despite intensive efforts, current microvessel- on-chip systems suffer from several limitations, most notably failure to produce physiologically relevant wall strain levels. In this study, a novel microvessel-on-chip based on the templating technique and using luminal flow actuation to generate physiologically relevant levels of wall shear stress and circumferential stretch is presented. Normal forces induced by the luminal pressure compress the surrounding soft collagen hydrogel, dilate the channel, and create large circumferential strain. The fluid pressure gradient in the system drives flow forward and generates realistic pulsatile wall shear stresses. Rigorous characterization of the system reveals the crucial role played by the poroelastic behavior of the hydrogel in determining the magnitudes of the wall shear stress and strain. The experimental measurements are combined with an analytical model of flow in both the lumen and the porous hydrogel to provide an exceptionally versatile user manual for an application-based choice of parameters in microvessels-on-chip. This unique strategy of flow actuation adds a dimension to the capabilities of microvessel-on-chip systems and provides a more general framework for improving hydrogel-based in vitro engineered platforms.Abstract Figure


Development ◽  
2022 ◽  
Author(s):  
Alexandre Souchaud ◽  
Arthur Boutillon ◽  
Gaëlle Charron ◽  
Atef Asnacios ◽  
Camille Nous ◽  
...  

To investigate the role of mechanical constraints in morphogenesis and development, we develop a pipeline of techniques based on incompressible elastic sensors. These techniques combine the advantages of incompressible liquid droplets, which have been used as precise in situ shear stress sensors, and of elastic compressible beads, which are easier to tune and to use. Droplets of a polydimethylsiloxane (PDMS) mix, made fluorescent through specific covalent binding to a rhodamin dye, are produced by a microfluidics device. The elastomer rigidity after polymerization is adjusted to the tissue rigidity. Its mechanical properties are carefully calibrated in situ, for a sensor embedded in a cell aggregate submitted to uniaxial compression. Thelocal shear stress tensor is retrieved from the sensor shape, accurately reconstructed through an active contour method. In vitro, within cell aggregates, and in vivo, in the prechordal plate of the Zebrafish embryo during gastrulation,our pipeline of techniques demonstrates its efficiency to directly measure the three dimensional shear stress repartition within a tissue.


Blood ◽  
2011 ◽  
Vol 118 (21) ◽  
pp. 4882-4882
Author(s):  
Omar S. Aljitawi ◽  
Dandan Li ◽  
Da Zhang ◽  
Jonathan Mahnken ◽  
Suman Kambhampati ◽  
...  

Abstract Abstract 4882 Introduction: Current in vitro drug testing models are based on 2-dimensional (2D) cell culture systems and therefore do not always predict in vivo responses. This lack of predictability of the 2D assays is believed to be related to the 3-dimensional (3D) microenvironment present in tissues or tumors. This 3D microenvironment, were cell-cell and cell-extracellular matrix (ECM) interactions occur, is fundamental for cell biologic activities. This is especially true for acute myeloid leukemia, were current 2-D cell culture models do not always predict clinical responses. This discrepancy in leukemia cell responses to chemotherapy in vivo, in comparison to in vitro, is at least partly related to leukemia cells interaction with the bone marrow microenvironment and their ability to establish niches. These niches offer partial protection from the effects of cytotoxic chemotherapy, otherwise termed cell adhesion-mediated drug resistance. In these experiments, we investigate the apoptotic effects of cytotoxic chemotherapy on HL-60 cell line cultured in a designed 3D AML cell culture model. In this 3D microenvironment, HL-60 cells were co-cultured with ex vivo expanded bone marrow mesenchyaml stem cells in a 3D synthetic scaffold. Aim: To examine the apoptotic effect of cytotoxic chemotherapy on HL-60 co-cultured with human bone marrow mesenchymal stem cells (huBM-MSCs) in 3D conditions. Methods: After several passages, expanded huBM-MSCs were seeded into PGA/PLLA 90/10 copolymer discs, 5-mm in diameter and 2-mm in thickness and allowed to attach to scaffold fibers and to expand over 2 weeks. Then, HL-60 were added and allowed to grow in the 3D culture system for another 10 days. HL-60 cells in 3D culture system were then exposed to doxorubicin given in two concentrations (25 and 50 μM) and incubated for 24 hours. HL-60 were then retrieved applying a combination of mechanical forces and using cell dissociation solution. FITC Annexin V Apoptosis Detection Kit was used to determine apoptosis. Apoptosis was confirmed by TUNEL assay. Proliferation of HL-60 cells in the 3D scaffold was assessed using Ki-67 stain of scaffold's cryosections. All tests were done in triplicates, and untreated HL-60 served as controls for treatment. Comparison was made with HL-60 cells alone and with HL-60 cells growing on a hu-BM-MSC monolayer. SAS version 9.2 (SAS Institute, Inc., 2002–2008) was used for statistical analysis Results: Virtually, all HL-60 cells treated with 25 or 50 μM underwent late apoptosis. Around.03% of HL-60 cells survived 25 μM concentration, none, however, survived 50 μM concentration. In 2D, most of HL-60 cells underwent necrosis, and to lesser extent late apoptosis. In sharp contrast, 17.8% of HL-60 cells survived 25μM concentration, nevertheless, only.27% of HL-60 cells treated with 50 μM concentration survived. The differences in apoptosis patterns between the three groups was statistically significant (P<.0001). Conclusion: compared to traditional cell culture conditions, the designed 3D culture conditions protected a higher percentage of HL-60 cells from undergoing apoptosis and necrosis. Disclosures: No relevant conflicts of interest to declare.


Sign in / Sign up

Export Citation Format

Share Document