scholarly journals Modular development enables rapid design of media for alternative hosts

2021 ◽  
Author(s):  
Andrew Biedermann ◽  
Isabella Gengaro ◽  
Sergio Rodriguez ◽  
Kerry Love ◽  
John Love
Keyword(s):  
New Media ◽  
Low Cost ◽  
Biomass Accumulation ◽  
Systematic Design ◽  
Rapid Improvement ◽  
Alternative Hosts ◽  
High Performing ◽  
Novel Approach ◽  
Blending Method ◽  
Stock Solutions

Developing media to sustain cell growth and production is an essential and ongoing activity in bioprocess development. Modifications to media can often address host or product-specific challenges, such as low productivity or poor product quality. For other applications, systematic design of new media can facilitate the adoption of new industrially relevant alternative hosts. Despite manifold existing methods, common approaches for optimization often remain time and labor intensive. We present here a novel approach to conventional media blending that leverages stable, simple, concentrated stock solutions to enable rapid improvement of measurable phenotypes of interest. We applied this modular methodology to generate high-performing media for two phenotypes of interest: biomass accumulation and heterologous protein production, using high-throughput, milliliter-scale batch fermentations of Pichia pastoris as a model system. In addition to these examples, we also created a flexible open-source package for modular blending automation on a low-cost liquid handling system to facilitate wide use of this method. Our modular blending method enables rapid, flexible media development, requiring minimal labor investment and prior knowledge of the host organism, and should enable developing improved media for other hosts and phenotypes of interest.

scholarly journals Modular development enables rapid design of media for alternative hosts

2021 ◽  
Author(s):  
Andrew M. Biedermann ◽  
Isabella R. Gengaro ◽  
Sergio A. Rodriguez-Aponte ◽  
Kerry R. Love ◽  
J. Christopher Love
Keyword(s):  
New Media ◽  
Low Cost ◽  
Biomass Accumulation ◽  
Systematic Design ◽  
Rapid Improvement ◽  
Alternative Hosts ◽  
High Performing ◽  
Novel Approach ◽  
Blending Method ◽  
Stock Solutions

AbstractDeveloping media to sustain cell growth and production is an essential and ongoing activity in bioprocess development. Modifications to media can often address host or product-specific challenges, such as low productivity or poor product quality. For other applications, systematic design of new media can facilitate the adoption of new industrially relevant alternative hosts. Despite manifold existing methods, common approaches for optimization often remain time and labor intensive. We present here a novel approach to conventional media blending that leverages stable, simple, concentrated stock solutions to enable rapid improvement of measurable phenotypes of interest. We applied this modular methodology to generate high-performing media for two phenotypes of interest: biomass accumulation and heterologous protein production, using high-throughput, milliliter-scale batch fermentations of Pichia pastoris as a model system. In addition to these examples, we also created a flexible open-source package for modular blending automation on a low-cost liquid handling system to facilitate wide use of this method. Our modular blending method enables rapid, flexible media development, requiring minimal labor investment and prior knowledge of the host organism, and should enable developing improved media for other hosts and phenotypes of interest.

Activation of oxygen evolving perovskites for oxygen reduction by functionalization with Fe–Nx/C groups

2014 ◽  
Vol 50 (94) ◽  
pp. 14760-14762 ◽  
Author(s):  
Rosalba A. Rincón ◽  
Justus Masa ◽  
Sara Mehrpour ◽  
Frank Tietz ◽  
Wolfgang Schuhmann
Keyword(s):  
Composite Materials ◽  
Oxygen Reduction ◽  
Low Cost ◽  
Alkaline Media ◽  
High Performing ◽  
Novel Approach ◽  
Activation Of Oxygen ◽  
Oxygen Evolving

A novel approach for integrating low-cost oxygen evolving and oxygen reducing electrocatalysts, and obtaining high-performing bifunctional composite materials for use in alkaline media.

scholarly journals Integrating high-performing electrochemical transducers in lateral flow assay

2021 ◽  
Author(s):  
Antonia Perju ◽  
Nongnoot Wongkaew
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
High Sensitivity ◽  
Lateral Flow ◽  
Analytical Performance ◽  
Label Free ◽  
High Performing ◽  
Lateral Flow Assays ◽  
Electrochemical Transducers

AbstractLateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

scholarly journals Bimetallic Ni-Based Catalysts for CO2 Methanation: A Review

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Anastasios I. Tsiotsias ◽  
Nikolaos D. Charisiou ◽  
Ioannis V. Yentekakis ◽  
Maria A. Goula
Keyword(s):  
Low Temperature ◽  
Noble Metals ◽  
Recent Progress ◽  
Low Cost ◽  
Alloy Formation ◽  
Co2 Methanation ◽  
High Performing ◽  
Mobile Sources ◽  
Low Dispersion ◽  
Made In

CO2 methanation has recently emerged as a process that targets the reduction in anthropogenic CO2 emissions, via the conversion of CO2 captured from point and mobile sources, as well as H2 produced from renewables into CH4. Ni, among the early transition metals, as well as Ru and Rh, among the noble metals, have been known to be among the most active methanation catalysts, with Ni being favoured due to its low cost and high natural abundance. However, insufficient low-temperature activity, low dispersion and reducibility, as well as nanoparticle sintering are some of the main drawbacks when using Ni-based catalysts. Such problems can be partly overcome via the introduction of a second transition metal (e.g., Fe, Co) or a noble metal (e.g., Ru, Rh, Pt, Pd and Re) in Ni-based catalysts. Through Ni-M alloy formation, or the intricate synergy between two adjacent metallic phases, new high-performing and low-cost methanation catalysts can be obtained. This review summarizes and critically discusses recent progress made in the field of bimetallic Ni-M (M = Fe, Co, Cu, Ru, Rh, Pt, Pd, Re)-based catalyst development for the CO2 methanation reaction.

scholarly journals 60–700 K CTAT and PTAT Temperature Sensors with 4H-SiC Schottky Diodes

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 942
Author(s):  
Razvan Pascu ◽  
Gheorghe Pristavu ◽  
Gheorghe Brezeanu ◽  
Florin Draghici ◽  
Philippe Godignon ◽  
...  
Keyword(s):  
Low Cost ◽  
Schottky Diodes ◽  
Schottky Contact ◽  
High Sensitivity ◽  
Xrd Analysis ◽  
Absolute Temperature ◽  
Lower Sensitivity ◽  
Readout Circuit ◽  
Sensing Element ◽  
High Performing

A SiC Schottky dual-diode temperature-sensing element, suitable for both complementary variation of VF with absolute temperature (CTAT) and differential proportional to absolute temperature (PTAT) sensors, is demonstrated over 60–700 K, currently the widest range reported. The structure’s layout places the two identical diodes in close, symmetrical proximity. A stable and high-barrier Schottky contact based on Ni, annealed at 750 °C, is used. XRD analysis evinced the even distribution of Ni2Si over the entire Schottky contact area. Forward measurements in the 60–700 K range indicate nearly identical characteristics for the dual-diodes, with only minor inhomogeneity. Our parallel diode (p-diode) model is used to parameterize experimental curves and evaluate sensing performances over this far-reaching domain. High sensitivity, upwards of 2.32 mV/K, is obtained, with satisfactory linearity (R2 reaching 99.80%) for the CTAT sensor, even down to 60 K. The PTAT differential version boasts increased linearity, up to 99.95%. The lower sensitivity is, in this case, compensated by using a high-performing, low-cost readout circuit, leading to a peak 14.91 mV/K, without influencing linearity.

scholarly journals A review on allotropes of carbon and natural filler-reinforced thermomechanical properties of upgraded epoxy hybrid composite

2021 ◽  
Vol 60 (1) ◽  
pp. 237-275
Author(s):  
Krushna Gouda ◽  
Sumit Bhowmik ◽  
Biplab Das
Keyword(s):  
Hybrid Composite ◽  
Low Cost ◽  
Extraction Process ◽  
Thermomechanical Properties ◽  
Neat Epoxy ◽  
Inorganic Filler ◽  
Nonrenewable Resource ◽  
High Performing ◽  
Thermosetting Polymers ◽  
Natural Filler

Abstract The scarcity of nonrenewable resource motivated inclination towards the environmental-friendly novel materials and development of waste natural filler-based hybrid composite is encouraged to fulfill the material demand. Epoxy resins-based composites are high-performing thermosetting polymers and have outstanding blending properties, good machinability, and low cost. Due to these advantages, thermoset plastic is largely used in a broad range of engineering applications; however, thermomechanical properties of neat epoxy are low. Thus, to enhance the thermomechanical properties of epoxy, it is interfaced materials such as graphite, graphene nanoplatelet, boron, carbon fiber, aluminium, silver, etc. Among various substances, graphene has been deliberated as an acceptable novel filler because of its exceptional properties. In addition to inorganic filler inclusion, natural filler/fiber like hemp, sisal, flax, bamboo, jute, etc. can be utilized in a higher percentage as biodegradable material. The present article assisted to improve thermomechanical properties of neat epoxy. This work identifies and addresses (i) processes used for graphene modification; (ii) treatment utilized for enhancing the binding properties of natural filler; (iii) various natural filler extraction process employed; (iv) neat epoxy modification; and (v) influence of different dimensions of fillers.

scholarly journals Novel approach to enhance coastal habitat and biotope mapping with drone aerial imagery analysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
João Gama Monteiro ◽  
Jesús L. Jiménez ◽  
Francesca Gizzi ◽  
Petr Přikryl ◽  
Jonathan S. Lefcheck ◽  
...  
Keyword(s):  
Anthropogenic Impacts ◽  
Spatial Scales ◽  
Low Cost ◽  
Human Populations ◽  
Coastal Habitat ◽  
Coastal Monitoring ◽  
Monitoring Programs ◽  
Novel Approach ◽  
Aerial Platforms ◽  
Rocky Habitats

AbstractUnderstanding the complex factors and mechanisms driving the functioning of coastal ecosystems is vital towards assessing how organisms, ecosystems, and ultimately human populations will cope with the ecological consequences of natural and anthropogenic impacts. Towards this goal, coastal monitoring programs and studies must deliver information on a range of variables and factors, from taxonomic/functional diversity and spatial distribution of habitats, to anthropogenic stress indicators such as land use, fisheries use, and pollution. Effective monitoring programs must therefore integrate observations from different sources and spatial scales to provide a comprehensive view to managers. Here we explore integrating aerial surveys from a low-cost Remotely Piloted Aircraft System (RPAS) with concurrent underwater surveys to deliver a novel approach to coastal monitoring. We: (i) map depth and substrate of shallow rocky habitats, and; (ii) classify the major biotopes associated with these environmental axes; and (iii) combine data from i and ii to assess the likely distribution of common sessile organismal assemblages over the survey area. Finally, we propose a general workflow that can be adapted to different needs and aerial platforms, which can be used as blueprints for further integration of remote-sensing with in situ surveys to produce spatially-explicit biotope maps.

A Novel Approach With Bayesian Networks to Multi-Robot Task Allocation in Dynamic Environments

2021 ◽  
Author(s):  
Ching-Wei Chuang ◽  
Harry H. Cheng
Keyword(s):  
Bayesian Networks ◽  
Task Allocation ◽  
Low Cost ◽  
Dynamic Environments ◽  
Modern World ◽  
Robot System ◽  
Novel Approach ◽  
Robot Systems ◽  
Robot Task ◽  
Multi Robot

Abstract In the modern world, building an autonomous multi-robot system is essential to coordinate and control robots to help humans because using several low-cost robots becomes more robust and efficient than using one expensive, powerful robot to execute tasks to achieve the overall goal of a mission. One research area, multi-robot task allocation (MRTA), becomes substantial in a multi-robot system. Assigning suitable tasks to suitable robots is crucial in coordination, which may directly influence the result of a mission. In the past few decades, although numerous researchers have addressed various algorithms or approaches to solve MRTA problems in different multi-robot systems, it is still difficult to overcome certain challenges, such as dynamic environments, changeable task information, miscellaneous robot abilities, the dynamic condition of a robot, or uncertainties from sensors or actuators. In this paper, we propose a novel approach to handle MRTA problems with Bayesian Networks (BNs) under these challenging circumstances. Our experiments exhibit that the proposed approach may effectively solve real problems in a search-and-rescue mission in centralized, decentralized, and distributed multi-robot systems with real, low-cost robots in dynamic environments. In the future, we will demonstrate that our approach is trainable and can be utilized in a large-scale, complicated environment. Researchers might be able to apply our approach to other applications to explore its extensibility.

LED Light Sources in Organic Synthesis: An Entry to A Novel Approach

2021 ◽  
Vol 18 ◽  
Author(s):  
Aparna Das
Keyword(s):  
Organic Compounds ◽  
Organic Synthesis ◽  
Photochemical Reaction ◽  
Low Cost ◽  
Environmentally Friendly ◽  
Photochemical Reactions ◽  
Light Sources ◽  
Blue Led ◽  
Oxidation Reduction ◽  
Novel Approach

: In recent years, photocatalytic technology has shown great potential as a low-cost, environmentally friendly, and sustainable technology. Compared to other light sources in photochemical reaction, LEDs have advantages in terms of efficiency, power, compatibility, and environmentally-friendly nature. This review highlights the most recent advances in LED-induced photochemical reactions. The effect of white and blue LEDs in reactions such as oxidation, reduction, cycloaddition, isomerization, and sensitization is discussed in detail. No other reviews have been published on the importance of white and blue LED sources in the photocatalysis of organic compounds. Considering all the facts, this review is highly significant and timely.

scholarly journals Condition monitoring of critical industrial assets using high performing low-cost MEMS accelerometers

Procedia CIRP ◽  
2021 ◽  
Vol 104 ◽  
pp. 1389-1394
Author(s):  
Agusmian Partogi Ompusunggu ◽  
Kerem Eryılmaz ◽  
Karel Janssen
Keyword(s):  
Condition Monitoring ◽  
Low Cost ◽  
High Performing ◽  
Mems Accelerometers
Sign in / Sign up

Export Citation Format

Share Document