scholarly journals Biomimetic scaffolds based on chitosan in bone regeneration. A review.

2021 ◽  
Author(s):  
Anna Kołakowska ◽  
Agnieszka Gadomska-Gajadhur ◽  
Paweł Ruśkowski
Keyword(s):  
Tissue Engineering ◽  
Polyelectrolyte Complex ◽  
Bone Cells ◽  
Living Organism ◽  
The Body ◽  
Preparation Process ◽  
Cell Scaffolds ◽  
Biomimetic Scaffolds ◽  
Chitosan Composite ◽  
Adhesion Process

The article focuses on a polysaccharide of natural origin – chitosan and its application in tissue engineering. The preparation process and physicochemical properties of the saccharide are described. The degradation of chitosan and the properties influencing the process both outside and in living organism were examined. Four applications in bone tissue engineering can be distinguished: preparation of cell scaffolds exclusively from chitosan, from a chitosan composite or from a chitosan polyelectrolyte complex. The fourth way is to modify the surface of scaffolds made of other materials by covering them with a layer of chitosan. At the end of the article, the processes taking place after placing the implant inside the body are described, how the structure of chitosan affects the behaviour of bone cells in the adhesion process and life processes.

scholarly journals Natural and Synthetic Polymers for Bone Scaffolds Optimization

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 905 ◽  
Author(s):  
Francesca Donnaloja ◽  
Emanuela Jacchetti ◽  
Monica Soncini ◽  
Manuela T. Raimondi
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Bone Cells ◽  
The Body ◽  
Bone Tissue Regeneration ◽  
In Vivo Models ◽  
Polymeric Scaffold ◽  
Technology Improvement

Bone tissue is the structural component of the body, which allows locomotion, protects vital internal organs, and provides the maintenance of mineral homeostasis. Several bone-related pathologies generate critical-size bone defects that our organism is not able to heal spontaneously and require a therapeutic action. Conventional therapies span from pharmacological to interventional methodologies, all of them characterized by several drawbacks. To circumvent these effects, tissue engineering and regenerative medicine are innovative and promising approaches that exploit the capability of bone progenitors, especially mesenchymal stem cells, to differentiate into functional bone cells. So far, several materials have been tested in order to guarantee the specific requirements for bone tissue regeneration, ranging from the material biocompatibility to the ideal 3D bone-like architectural structure. In this review, we analyse the state-of-the-art of the most widespread polymeric scaffold materials and their application in in vitro and in vivo models, in order to evaluate their usability in the field of bone tissue engineering. Here, we will present several adopted strategies in scaffold production, from the different combination of materials, to chemical factor inclusion, embedding of cells, and manufacturing technology improvement.

Tissue Engineering of the Intervertebral Disc

2012 ◽  
Author(s):  
Craig Wiltsey ◽  
Thomas Christiani ◽  
Jesse Williams ◽  
Jamie Coulter ◽  
Dana Demiduke ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Intervertebral Disc ◽  
Tissue Regeneration ◽  
The Body ◽  
Load Bearing ◽  
Structural Support ◽  
Biomimetic Scaffolds

Tissue engineering is a rapidly growing field of research that aims to repair damaged tissues within the body. Among tissue engineering approaches is the use of scaffolds to help regenerate lost tissues. Scaffolds provide structural support for specific areas within the body, namely load bearing regions, and allow for cells to be seeded within the scaffold for tissue regeneration. Scaffolds that specifically replicate the properties and/or composition of native tissues are referred to as biomimetic scaffolds.

Scaffolds for Drug Delivery in Tissue Engineering

2008 ◽  
Vol 1 (2) ◽  
pp. 113-123 ◽  
Author(s):  
Vikas V. Gaikwad ◽  
Abasaheb B. Patil ◽  
Madhuri V. Gaikwad
Keyword(s):  
Drug Delivery ◽  
Tissue Engineering ◽  
Heart Diseases ◽  
Cartilage Regeneration ◽  
Tissue Growth ◽  
The Body ◽  
Patient Specific ◽  
In Situ Gel ◽  
Heart Muscle Cells

Scaffolds are used for drug delivery in tissue engineering as this system is a highly porous structure to allow tissue growth.  Although several tissues in the body can regenerate, other tissue such as heart muscles and nerves lack regeneration in adults. However, these can be regenerated by supplying the cells generated using tissue engineering from outside. For instance, in many heart diseases, there is need for heart valve transplantation and unfortunately, within 10 years of initial valve replacement, 50–60% of patients will experience prosthesis associated problems requiring reoperation. This could be avoided by transplantation of heart muscle cells that can regenerate. Delivery of these cells to the respective tissues is not an easy task and this could be done with the help of scaffolds. In situ gel forming scaffolds can also be used for the bone and cartilage regeneration. They can be injected anywhere and can take the shape of a tissue defect, avoiding the need for patient specific scaffold prefabrication and they also have other advantages. Scaffolds are prepared by biodegradable material that result in minimal immune and inflammatory response. Some of the very important issues regarding scaffolds as drug delivery systems is reviewed in this article.

Biomimetic Design of 3D Printed Tissue-engineered bone Constructs

2020 ◽  
Vol 16 ◽  
Author(s):  
Wei Liu ◽  
Shifeng Liu ◽  
Yunzhe Li ◽  
Peng Zhou ◽  
Qian ma
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Advanced Materials ◽  
Bionic Design ◽  
Material Interfaces ◽  
Precise Control ◽  
Cell Printing ◽  
Biomimetic Scaffolds ◽  
3D Printed

Abstract:: Surgery to repair damaged tissue, which is caused by disease or trauma, is being carried out all the time, and a desirable treatment is compelling need to regenerate damaged tissues to further improve the quality of human health. Therefore, more and more research focus on exploring the most suitable bionic design to enrich available treatment methods. 3D-printing, as an advanced materials processing approach, holds promising potential to create prototypes with complex constructs that could reproduce primitive tissues and organs as much as possible or provide appropriate cell-material interfaces. In a sense, 3D printing promises to bridge between tissue engineering and bionic design, which can provide an unprecedented personalized recapitulation with biomimetic function under the precise control of the composition and spatial distribution of cells and biomaterials. This article describes recent progress in 3D bionic design and the potential application prospect of 3D printing regenerative medicine including 3D printing biomimetic scaffolds and 3D cell printing in tissue engineering.

scholarly journals Correlating cell morphology and osteoid mineralization relative to strain profile for bone tissue engineering applications

2007 ◽  
Vol 5 (25) ◽  
pp. 899-907 ◽  
Author(s):  
M.A Wood ◽  
Y Yang ◽  
E Baas ◽  
D.O Meredith ◽  
R.G Richards ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Cell Morphology ◽  
Bone Cells ◽  
Calcium Deposition ◽  
Cell Behaviour ◽  
Local Strains ◽  
Strain Profile ◽  
Pore Model

A number of bone tissue engineering strategies use porous three-dimensional scaffolds in combination with bioreactor regimes. The ability to understand cell behaviour relative to strain profile will allow for the effects of mechanical conditioning in bone tissue engineering to be realized and optimized. We have designed a model system to investigate the effects of strain profile on bone cell behaviour. This simplified model has been designed with a view to providing insight into the types of strain distribution occurring across a single pore of a scaffold subjected to perfusion–compression conditioning. Local strains were calculated at the surface of the pore model using finite-element analysis. Scanning electron microscopy was used in secondary electron mode to identify cell morphology within the pore relative to local strains, while backscattered electron detection in combination with X-ray microanalysis was used to identify calcium deposition. Morphology was altered according to the level of strain experienced by bone cells, where cells subjected to compressive strains (up to 0.61%) appeared extremely rounded while those experiencing zero and tensile strain (up to 0.81%) were well spread. Osteoid mineralization was similarly shown to be dose dependent with respect to substrate strain within the pore model, with the highest level of calcium deposition identified in the intermediate zones of tension/compression.

scholarly journals Collagen-Based Electrospun Materials for Tissue Engineering: A Systematic Review

2021 ◽  
Vol 8 (3) ◽  
pp. 39
Author(s):  
Britani N. Blackstone ◽  
Summer C. Gallentine ◽  
Heather M. Powell
Keyword(s):  
Systematic Review ◽  
Tissue Engineering ◽  
Collagen Type I ◽  
The Body ◽  
Pool Data ◽  
Type I ◽  
High Concentrations ◽  
Increased Strength

Collagen is a key component of the extracellular matrix (ECM) in organs and tissues throughout the body and is used for many tissue engineering applications. Electrospinning of collagen can produce scaffolds in a wide variety of shapes, fiber diameters and porosities to match that of the native ECM. This systematic review aims to pool data from available manuscripts on electrospun collagen and tissue engineering to provide insight into the connection between source material, solvent, crosslinking method and functional outcomes. D-banding was most often observed in electrospun collagen formed using collagen type I isolated from calfskin, often isolated within the laboratory, with short solution solubilization times. All physical and chemical methods of crosslinking utilized imparted resistance to degradation and increased strength. Cytotoxicity was observed at high concentrations of crosslinking agents and when abbreviated rinsing protocols were utilized. Collagen and collagen-based scaffolds were capable of forming engineered tissues in vitro and in vivo with high similarity to the native structures.

scholarly journals Sinusoidal electromagnetic fields accelerate bone regeneration by boosting the multifunctionality of bone marrow mesenchymal stem cells

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Weigang Li ◽  
Wenbin Liu ◽  
Wei Wang ◽  
Jiachen Wang ◽  
Tian Ma ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Bone Marrow ◽  
Mesenchymal Stem Cells ◽  
Bone Regeneration ◽  
Electromagnetic Fields ◽  
Bone Defects ◽  
Cell Scaffolds ◽  
Marrow Mesenchymal Stem Cells ◽  
Calvarial Defects

Abstract Background The repair of critical-sized bone defects is always a challenging problem. Electromagnetic fields (EMFs), used as a physiotherapy for bone defects, have been suspected to cause potential hazards to human health due to the long-term exposure. To optimize the application of EMF while avoiding its adverse effects, a combination of EMF and tissue engineering techniques is critical. Furthermore, a deeper understanding of the mechanism of action of EMF will lead to better applications in the future. Methods In this research, bone marrow mesenchymal stem cells (BMSCs) seeded on 3D-printed scaffolds were treated with sinusoidal EMFs in vitro. Then, 5.5 mm critical-sized calvarial defects were created in rats, and the cell scaffolds were implanted into the defects. In addition, the molecular and cellular mechanisms by which EMFs regulate BMSCs were explored with various approaches to gain deeper insight into the effects of EMFs. Results The cell scaffolds treated with EMF successfully accelerated the repair of critical-sized calvarial defects. Further studies revealed that EMF could not directly induce the differentiation of BMSCs but improved the sensitivity of BMSCs to BMP signals by upregulating the quantity of specific BMP (bone morphogenetic protein) receptors. Once these receptors receive BMP signals from the surrounding milieu, a cascade of reactions is initiated to promote osteogenic differentiation via the BMP/Smad signalling pathway. Moreover, the cytokines secreted by BMSCs treated with EMF can better facilitate angiogenesis and osteoimmunomodulation which play fundamental roles in bone regeneration. Conclusion In summary, EMF can promote the osteogenic potential of BMSCs and enhance the paracrine function of BMSCs to facilitate bone regeneration. These findings highlight the profound impact of EMF on tissue engineering and provide a new strategy for the clinical treatment of bone defects.

scholarly journals Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Hamed Nosrati ◽  
Reza Aramideh Khouy ◽  
Ali Nosrati ◽  
Mohammad Khodaei ◽  
Mehdi Banitalebi-Dehkordi ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Wound Healing ◽  
Tissue Regeneration ◽  
Molecular Mechanisms ◽  
Healing Process ◽  
The Body ◽  
Key Factors ◽  
Potential Applications ◽  
Nanocomposite Scaffolds

AbstractSkin is the body’s first barrier against external pathogens that maintains the homeostasis of the body. Any serious damage to the skin could have an impact on human health and quality of life. Tissue engineering aims to improve the quality of damaged tissue regeneration. One of the most effective treatments for skin tissue regeneration is to improve angiogenesis during the healing period. Over the last decade, there has been an impressive growth of new potential applications for nanobiomaterials in tissue engineering. Various approaches have been developed to improve the rate and quality of the healing process using angiogenic nanomaterials. In this review, we focused on molecular mechanisms and key factors in angiogenesis, the role of nanobiomaterials in angiogenesis, and scaffold-based tissue engineering approaches for accelerated wound healing based on improved angiogenesis.

Low-temperature 3D printing of collagen and chitosan composite for tissue engineering

2021 ◽  
Vol 123 ◽  
pp. 111963
Author(s):  
Hairui Suo ◽  
Jiaying Zhang ◽  
Mingen Xu ◽  
Ling Wang
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Low Temperature ◽  
Chitosan Composite

scholarly journals Power Failure of Mitochondria and Oxidative Stress in Neurodegeneration and Its Computational Models

Antioxidants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 229
Author(s):  
JunHyuk Woo ◽  
Hyesun Cho ◽  
YunHee Seol ◽  
Soon Ho Kim ◽  
Chanhyeok Park ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Mitochondrial Dysfunction ◽  
Computational Models ◽  
Neuronal Damage ◽  
Living Organism ◽  
The Body ◽  
Mitochondrial Functions ◽  
A Cell ◽  
The Brain ◽  
And Oxidative Stress

The brain needs more energy than other organs in the body. Mitochondria are the generator of vital power in the living organism. Not only do mitochondria sense signals from the outside of a cell, but they also orchestrate the cascade of subcellular events by supplying adenosine-5′-triphosphate (ATP), the biochemical energy. It is known that impaired mitochondrial function and oxidative stress contribute or lead to neuronal damage and degeneration of the brain. This mini-review focuses on addressing how mitochondrial dysfunction and oxidative stress are associated with the pathogenesis of neurodegenerative disorders including Alzheimer’s disease, amyotrophic lateral sclerosis, Huntington’s disease, and Parkinson’s disease. In addition, we discuss state-of-the-art computational models of mitochondrial functions in relation to oxidative stress and neurodegeneration. Together, a better understanding of brain disease-specific mitochondrial dysfunction and oxidative stress can pave the way to developing antioxidant therapeutic strategies to ameliorate neuronal activity and prevent neurodegeneration.

Sign in / Sign up

Export Citation Format

Share Document