scholarly journals Forced dynamics control of an actuator with linear PMSM

2009 ◽  
Vol 22 (2) ◽  
pp. 183-195
Author(s):  
Ján Vittek ◽  
Vladimir Vavrús ◽  
Jozef Buday ◽  
Jozef Kuchta
Keyword(s):  
Control System ◽  
Control Method ◽  
Sliding Mode ◽  
Permanent Magnet Synchronous Motor ◽  
Control Law ◽  
Flux Vector ◽  
Stator Current ◽  
Current Vector ◽  
Filtering Effect ◽  
Speed Response

The paper presents design and verification of Forced Dynamics Control of an actuator with linear permanent magnet synchronous motor. This control method is a relatively new one and offers an accurate realization of a dynamic speed response, which can be selected for given application by the user. In addition to this, the angle between stator current vector and moving part flux vector is maintained mutually perpendicular as it is under conventional vector control. To achieve prescribed speed response derived control law requires estimation of an external force, which is obtained from the set of observers. The first observer works in pseudo-sliding mode and observes speed of moving part while the second one has filtering effect for elimination of the previous one chattering. The overall control system is verified by simulations and experimentally. Preliminary experiments confirmed that the moving part speed response follows the prescribed one fairly closely.

scholarly journals Performance and Analysis of Indirect Torque Control-Based Three-Phase Induction Motor

ELKHA ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 122
Author(s):  
Andri Pradipta ◽  
Santi Triwijaya ◽  
Mohamad Ridwan
Keyword(s):  
Control System ◽  
Induction Motor ◽  
Induction Motors ◽  
Control Method ◽  
Torque Control ◽  
Stator Current ◽  
Speed Controller ◽  
Three Phase ◽  
20 Nm ◽  
Speed Response

Induction motors are widely used in industrial processes, vehicles and automation. Three-phase induction motors can be used for traction systems on electric locomotives. In this case, the speed control system is an important thing that must be applied to the propulsion system. This study aimed to test the indirect torque control for a Three-phase induction motor. A proportional integral (PI) controller was applied for speed controller. The indirect torque control system was modeled and simulated using PSIM software. According to the result, the control method showed a good performance. The speed could be maintained even the speed reference was changing or a load was applied. The steady state error of the speed response was just 0.1% with rise time around 0.06 s. The stator current went up to 39.5 A in starting condition. The stator current reached 12 A rms when the load of 10 Nm was applied. Then, the current rose to 15.7 A rms when the load was increased to 40 Nm and the current came down to 12.8 A rms when the load was decreased to 20 Nm.

scholarly journals Reduction of susceptibility from electromagnetic interference in sensorless FOC of IPMSM

2019 ◽  
Vol 32 (1) ◽  
pp. 51-63
Author(s):  
Lindita Dhamo ◽  
Aida Spahiu ◽  
Mitja Nemec ◽  
Vanja Ambrozic
Keyword(s):  
Control System ◽  
Electromagnetic Interference ◽  
Sliding Mode ◽  
Permanent Magnet Synchronous Motor ◽  
Control Unit ◽  
Practical Implementation ◽  
Processing Unit ◽  
Interior Permanent Magnet ◽  
Ripple Reduction ◽  
Speed Response

This paper presents main problems of practical implementation of Field Oriented Control (FOC) developed for an Interior Permanent Magnet Synchronous Motor (IPMSM). The main sources of Electromagnetic Interferences (EMI) noises are discussed and practical aspects when a position sensor is used are presented. The control system is based on the DSP processing unit, together with inverter and encoder. The main problem addressed in this paper is reduction of vibrations in torque and speed response in a real system by re-placing a hardware device of control system very susceptible to EMI noises, like encoder, with a soft block in control unit like Sliding Mode Observer, less sensitive to EMI. The experimental results with this control structure show considerable ripple reduction at steady state in torque, speed and current, as a consequence of reduction of sensitivity to EMI noises.

Aircraft Controller Flight Control System Design

2014 ◽  
Vol 602-605 ◽  
pp. 1291-1294
Author(s):  
Hong Cheng Zhou ◽  
Dao Bao Wang
Keyword(s):  
Control System ◽  
Flight Control ◽  
Control Method ◽  
Sliding Mode ◽  
Variable Structure ◽  
Control Law ◽  
Low Velocity ◽  
Structure Control ◽  
Sliding Mode Variable Structure ◽  
And Control

The servo control methods of motion configuration are researched. Based on analysis for characteristic of the motion configuration, the control strategy and control law used on the motion control system are presented. The controllers are respectively designed by frequency correcting method and normal control method which belongs to classical control theory. Sliding mode variable structure control method is presented for location control law designing, so that the problem of location control loop low velocity creeping is solved, and a simulating experimentation demonstrate the effectiveness of the proposed approach.

scholarly journals Research on an Improved Sliding Mode Sensorless Six-Phase PMSM Control Strategy Based on ESO

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1292
Author(s):  
Hanying Gao ◽  
Guoqiang Zhang ◽  
Wenxue Wang ◽  
Xuechen Liu
Keyword(s):  
Control System ◽  
Control Strategy ◽  
Sliding Mode ◽  
High Reliability ◽  
Permanent Magnet Synchronous Motor ◽  
Torque Ripple ◽  
Estimation Accuracy ◽  
Switching Function ◽  
Motor Speed ◽  
Rotor Position

The six-phase motor control system has low torque ripple, low harmonic content, and high reliability; therefore, it is suitable for electric vehicles, aerospace, and other applications requiring high power output and reliability. This study presents a superior sensorless control system for a six-phase permanent magnet synchronous motor (PMSM). The mathematical model of a PMSM in a stationary coordinate system is presented. The information of motor speed and position is obtained by using a sliding mode observer (SMO). As torque ripple and harmonic components affect the back electromotive force (BEMF) estimated value through the traditional SMO, the function of the frequency-variable tracker of the stator current (FVTSC) is used instead of the traditional switching function. By improving the SMO method, the BEMF is estimated independently, and its precision is maintained under startup or variable-speed states. In order to improve the estimation accuracy and resistance ability of the observer, the rotor position error was taken as the disturbance term, and the third-order extended state observer (ESO) was constructed to estimate the rotational speed and rotor position through the motor mechanical motion equation. Finally, the effectiveness of the method is verified by simulation and experiment results. The proposed control strategy can effectively improve the dynamic and static performance of PMSM.

Robust adaptive tracking control for uncertain nonholonomic mobile manipulator

2021 ◽  
pp. 095965182110277
Author(s):  
Abdelkrim Brahmi ◽  
Maarouf Saad ◽  
Brahim Brahmi ◽  
Ibrahim El Bojairami ◽  
Guy Gauthier ◽  
...  
Keyword(s):  
Control Method ◽  
Sliding Mode ◽  
Robust Adaptive Control ◽  
Convergence Time ◽  
Adaptive Sliding Mode Control ◽  
Mobile Manipulator ◽  
Control Law ◽  
Adaptive Tracking Control ◽  
Robust Adaptive ◽  
Manipulator Robot

In the research put forth, a robust adaptive control method for a nonholonomic mobile manipulator robot, with unknown inertia parameters and disturbances, was proposed. First, the description of the robot’s dynamics model was developed. Thereafter, a novel adaptive sliding mode control was designed, to which all parameters describing involved uncertainties and disturbances were estimated by the adaptive update technique. The proposed control ensures a relatively good system tracking, with all errors converging to zero. Unlike conventional sliding mode controls, the suggested is able to achieve superb performance, without resulting in any chattering problems, along with an extremely fast system trajectories convergence time to equilibrium. The aforementioned characteristics were attainable upon using an innovative reaching law based on potential functions. Furthermore, the Lyapunov approach was used to design the control law and to conduct a global stability analysis. Finally, experimental results and comparative study collected via a 05-DoF mobile manipulator robot, to track a given trajectory, showing the superior efficiency of the proposed control law.

Sliding Mode Control for Wheeled Inverted Pendulum

2014 ◽  
Vol 971-973 ◽  
pp. 714-717 ◽  
Author(s):  
Xiang Shi ◽  
Zhe Xu ◽  
Qing Yi He ◽  
Ka Tian
Keyword(s):  
Control System ◽  
Sliding Mode Control ◽  
High Performance ◽  
Inverted Pendulum ◽  
Sliding Mode ◽  
Experimental Results ◽  
Control Law ◽  
Collaborative Simulation ◽  
Mode Control ◽  
Wheeled Inverted Pendulum

To control wheeled inverted pendulum is a good way to test all kinds of theories of control. The control law is designed, and it based on the collaborative simulation of MATLAB and ADAMS is used to control wheeled inverted pendulum. Then, with own design of hardware and software of control system, sliding mode control is used to wheeled inverted pendulum, and the experimental results of it indicate short adjusting time, the small overshoot and high performance.

scholarly journals A novel sliding mode single-loop speed control method based on disturbance observer for permanent magnet synchronous motor drives

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881527 ◽  
Author(s):  
Xudong Liu ◽  
Ke Li
Keyword(s):  
Permanent Magnet ◽  
Disturbance Observer ◽  
Control Structure ◽  
Control Method ◽  
Sliding Mode ◽  
Permanent Magnet Synchronous Motor ◽  
Speed Control ◽  
Synchronous Motor ◽  
Motor Drives ◽  
Sliding Mode Controller

A novel speed control method based on sliding mode control and disturbance observer is studied for permanent magnet synchronous motor drives. Different from the conventional speed and current cascade control structure in the field-oriented vector control, the new controller adopts the single-loop control structure, in which the speed and quadrate axes current controllers are combined together. First, a multiple-surface sliding mode controller is designed for the speed control system of permanent magnet synchronous motor. Although the sliding mode controller has the strong robustness for the matched disturbance in the system, it still cannot deal with mismatched disturbance effectively, such as external load disturbance and some parameter variations. Thus, the disturbance observer is introduced to estimate the disturbance in the motor, which is designed by combining the proposed sliding mode controller. Finally, the effectiveness is tested under various conditions by both simulation and experiment. The results show that the designed controller has the fast transient response and robustness under different operating conditions.

Disturbance Adaptive Discrete-Time Sliding Control With Application to Engine Speed Control

1998 ◽  
Vol 123 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Mooncheol Won ◽  
J. K. Hedrick
Keyword(s):  
Nonlinear Systems ◽  
Discrete Time ◽  
Control Method ◽  
Sliding Mode ◽  
Input Saturation ◽  
Adaptive Sliding Mode Control ◽  
Control Law ◽  
Sliding Surface ◽  
Sliding Control ◽  
Error Dynamics

This paper presents a discrete-time adaptive sliding control method for SISO nonlinear systems with a bounded disturbance or unmodeled dynamics. Control and adaptation laws considering input saturation are obtained from approximately discretized nonlinear systems. The developed disturbance adaptation or estimation law is in a discrete-time form, and differs from that of conventional adaptive sliding mode control. The closed-loop poles of the feedback linearized sliding surface and the adaptation error dynamics can easily be placed. It can be shown that the adaptation error dynamics can be decoupled from sliding surface dynamics using the proposed scheme. The proposed control law is applied to speed tracking control of an automatic engine subject to unknown external loads. Simulation and experimental results verify the advantages of the proposed control law.

Sign in / Sign up

Export Citation Format

Share Document