scholarly journals The influence of the oxygen equivalent in a gas-mixture on the structure and toughness of microalloyed steel weldments

2006 ◽  
Vol 71 (3) ◽  
pp. 313-321 ◽  
Author(s):  
Radica Prokic-Cvetkovic ◽  
Andjelka Milosavljevic ◽  
Aleksandar Sedmak ◽  
Olivera Popovic
Keyword(s):  
Impact Toughness ◽  
Crack Propagation ◽  
Weld Metal ◽  
Acicular Ferrite ◽  
Microalloyed Steel ◽  
Gas Mixtures ◽  
Gas Mixture ◽  
Weld Metals ◽  
Maximum Crack ◽  
The Impact

Testing were carried out on two steels. The first was microalloyed with Nb and second with Ti, Nb and V. The impact toughness of weld metals of these steels was evaluated using an instrumented Charpy pendulum. Five different gas mixtures (Ar, CO2, O2) were used to determine the optimal gas shielded metal arc process for both steels. The oxygen equivalent was used as a representative parameter of a mixture to follow, in particularly, its effect on the microstructure, toughness and crack propagation energy of the weld metal. For these investigated steels, the optimum gas mixture was established (5%CO2, 0.91%O2, balance Ar), which provided the maximum crack propagation energy, due to the microstructure which consisted dominantly of acicular ferrite.

scholarly journals Transformation of M/A Constituents during Tempering and Its Effects on Impact Toughness of Weld Metals for X80 Hot Bends

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Gui-ying Qiao ◽  
Xiu-lin Han ◽  
Xiao-wei Chen ◽  
Xu Wang ◽  
Bo Liao ◽  
...  
Keyword(s):  
Impact Toughness ◽  
Weld Metal ◽  
Acicular Ferrite ◽  
Tempering Temperature ◽  
Factors Affecting ◽  
Weld Metals ◽  
Gleeble 3500 ◽  
The Impact ◽  
Carbide Particles

Impact toughness of the weld metal is one of the important factors affecting the quality of hot bends, which is strongly dependent on the microstructure transformation during hot bending and tempering. In this study, three kinds of weld metals with different Ni contents were selected, and then the effects of tempering temperature on the microstructure impact toughness of weld metals for hot bends were investigated by simulation conducted on a Gleeble-3500 thermal simulator. The results show that the nonmetallic inclusion particles in weld metals can become the nuclear core of acicular ferrite like in as-welded metal. So, the overlapping acicular ferrite microstructure is obtained in the weld metal after direct cooling from the reheating temperature. During tempering, the overlapping acicular ferrite microstructure is degenerated, and martensite/austenite (M/A) constituents in the acicular ferrite microstructure decompose into ferrites and carbides. The resulting carbide particles mainly distribute along the acicular ferrite grain boundaries. With the increase of the tempering temperature, the carbide particles coarsen, which decreases the impact toughness of the weld metal of hot bends. Addition of Ni to weld metals can refine the acicular ferrite and improve the impact toughness.

Effects of oxygen content on microstructure and impact toughness of high heat input flux-cored wire weld metals

2018 ◽  
Vol 115 (4) ◽  
pp. 410
Author(s):  
Fengyu Song ◽  
Yanmei Li ◽  
Ping Wang ◽  
Fuxian Zhu
Keyword(s):  
Grain Size ◽  
Impact Toughness ◽  
Weld Metal ◽  
Oxygen Content ◽  
Heat Input ◽  
High Heat ◽  
Cored Wire ◽  
Weld Metals ◽  
High Heat Input ◽  
The Impact

Three weld metals with different oxygen contents were developed. The influence of oxygen contents on the microstructure and impact toughness of weld metal was investigated through high heat input welding tests. The results showed that a large number of fine inclusions were formed and distributed randomly in the weld metal with oxygen content of 500 ppm under the heat input condition of 341 kJ/cm. Substantial cross interlocked acicular ferritic grains were induced to generate in the vicinity of the inclusions, primarily leading to the high impact toughness at low temperature for the weld metal. With the increase of oxygen content, the number of fine inclusions distributed in the weld metal increased and the grain size of intragranular acicular ferrites decreased, which enhanced the impact toughness of the weld metal. Nevertheless, a further increase of oxygen content would contribute to a great diminution of the austenitic grain size. Following that the fraction of grain boundary and the start temperature of transformation increased, which facilitated the abundant formation of pro-eutectoid ferrites and resulted in a deteriorative impact toughness of the weld metal.

scholarly journals Effect of Nickel on the Microstructure, Hardness and Impact Toughness of SM570-TMC Weld Metals

2019 ◽  
Vol 269 ◽  
pp. 02007 ◽  
Author(s):  
Nova Arief Setiyanto ◽  
Herry Oktadinata ◽  
Winarto Winarto
Keyword(s):  
Impact Toughness ◽  
Weld Metal ◽  
Nickel Content ◽  
Optical Microscope ◽  
Fusion Welding ◽  
Welding Wire ◽  
Butt Weld ◽  
Weld Metals ◽  
Flux Cored Arc Welding ◽  
The Impact

SM570-TMC steel was applied in the various fields of steel construction where higher strength is required than conventional mild steel. This steel is commonly fabricated by fusion welding where flux-cored arc welding (FCAW) is preferred due to efficiency consideration. In this study, 14 mm thickness of SM570-TMC steel was butt weld by FCAW using three electrode wires with different nickel content (0% Ni, 1% Ni, 1.5% Ni). The microstructure of weldments was studied using an optical microscope. The hardness distribution tests were performed in the heat affected zone, parent metal and weld metal. And impact toughness of weld metals were measured at temperatures of 25 °C, 0 °C and -20 °C. The results show the steel plate welded using welding wire containing 1% Ni provides more superior impact toughness in the weld metal than welding wire 0% Ni, while the impact toughness of the sample which welded using welding wire containing 1.5% tend to decrease. Nickel element which deposited to weld metal by using welding wires containing 1% Ni has improved the impact toughness, but 1.5% Ni may too high which deteriorate impact toughness.

scholarly journals Tempforming as an Advanced Processing Method for Carbon Steels

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1566
Author(s):  
Anastasiya Dolzhenko ◽  
Rustam Kaibyshev ◽  
Andrey Belyakov
Keyword(s):  
Impact Toughness ◽  
Crack Propagation ◽  
Large Strain ◽  
High Strength ◽  
Close Relation ◽  
Carbon Steels ◽  
Processing Method ◽  
Propagation Mode ◽  
Displacement Curve ◽  
The Impact

The microstructural mechanisms providing delamination toughness in high-strength low-alloyed steels are briefly reviewed. Thermo-mechanical processing methods improving both the strength and impact toughness are described, with a close relation to the microstructures and textures developed. The effect of processing conditions on the microstructure evolution in steels with different carbon content is discussed. Particular attention is paid to tempforming treatment, which has been recently introduced as a promising processing method for high-strength low-alloyed steel semi-products with beneficial combination of strength and impact toughness. Tempforming consists of large strain warm rolling following tempering. In contrast to ausforming, the steels subjected to tempforming may exhibit an unusual increase in the impact toughness with a decrease in test temperature below room temperature. This phenomenon is attributed to the notch blunting owing to easy splitting (delamination) crosswise to the principle crack propagation. The relationships between the crack propagation mode, the delamination fracture, and the load-displacement curve are presented and discussed. Further perspectives of tempforming applications and promising research directions are outlined.

scholarly journals Effect of Ti(C, N) Particle on the Impact Toughness of B-Microalloyed Steel

Metals ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 868 ◽  
Author(s):  
Yu Huang ◽  
Guo-Guang Cheng ◽  
Shi-Jian Li ◽  
Wei-Xing Dai ◽  
You Xie
Keyword(s):  
Impact Toughness ◽  
Microalloyed Steel ◽  
Fracture Initiation ◽  
Sem Analysis ◽  
Number Density ◽  
Size Number ◽  
Microalloying Elements ◽  
The Impact ◽  
Ti Content ◽  
Scanning Electron

Simultaneously improving the toughness and strength of B-microalloyed steel by adding microalloying elements (Nb, V, Ti) has been an extensively usedmethod for researchers. However, coarse Ti(C, N) particle will precipitate during solidification with inappropriate Ti content addition, resulting in poor impact toughness. The effect of the size, number density, and location of Ti(C, N) particle on the impact toughness of B-microalloyed steel with various Ti/N ratios was investigated. Coarse Ti(C, N) particles were investigated to act as the cleavage fracture initiation sites, by using scanning electron microscopy (SEM) analysis. When more coarse Ti(C, N) inclusions were located in ferrite instead of pearlite, the impact toughness of steel with ferrite–pearlite microstructure was lower. Meanwhile, when the size or the number density of Ti(C, N) inclusions was larger, the impact toughness was adversely affected. Normalizing treatment helps to improve the impact property of B-microalloyed steel, owing to the location of Ti(C, N) particles being partly changed from ferrite to pearlite. The formation mechanism of coarse Ti(C, N) particles was calculated by the thermodynamic software Factsage 7.1 and Thermo-Calc. The Ti(C, N) particles formed during the solidification of molten steel, and the N-rich Ti(C, N) phase precipitated first and, then, followed by the C-rich Ti(C, N) phase. Decreasing the Ti and N content is an effective way to inhibit the formation of coarse Ti(C, N) inclusions.

scholarly journals The Microstructure and Property of the Heat Affected zone in C-Mn Steel Treated by Rare Earth

2019 ◽  
Vol 38 (2019) ◽  
pp. 362-369 ◽  
Author(s):  
Ming-ming Song ◽  
Yu-min Xie ◽  
Bo Song ◽  
Zheng-liang Xue ◽  
Nan Nie ◽  
...  
Keyword(s):  
Rare Earth ◽  
Impact Toughness ◽  
Heat Affected Zone ◽  
Acicular Ferrite ◽  
Steel Matrix ◽  
Impact Properties ◽  
Treated Steel ◽  
The Impact ◽  
Welding Processes ◽  
Mn Steel

AbstractThe microstructures and impact properties of the heat affected zone (HAZ) in steel treated by rare earth (RE) under different welding processes were discussed. The effect of Al on the impact properties of the HAZ in RE treated steel was analyzed. It finds that when the welding t8/5 is smaller than 111 s, the main microstructure in steels is bainite/widmanstatten. The impact toughness of the HAZ is lower than that of the steel matrix. When t8/5 is more than 250 s, the microstructure is mainly acicular ferrite (AF) in the steel treated by RE, and the impact toughness of HAZ is obviously improved. Even under the welding processing with t8/5 about 600 s in RE treated steel can still obtain a lot of AF. While in the steel killed by Al and treated by RE, the main microstructure is parallel cluster of bainite/widmanstatten, and the impact toughness of HAZ is significantly lower than that of low-Al RE treated steel. Al can deteriorate the optimizing of RE treatment on HAZ.

Study on Weldablity of Dissimilar Steel between 16MnR and S31803

2011 ◽  
Vol 391-392 ◽  
pp. 768-772 ◽  
Author(s):  
Li Yang ◽  
Zhan Zhe Zhang
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Impact Toughness ◽  
Weld Metal ◽  
Welded Joint ◽  
Optical Microscope ◽  
Dissimilar Steel ◽  
Austenite Content ◽  
Mechanical Properties And Corrosion ◽  
The Impact

The weldablity of dissimilar steel between 16MnR and S31803 was analyzed and researched. By means of optical microscope (OM), the microstructure of the weld joint was investigated, which is welded by tungsten inert gas arc backing welding (GTAW) and manual arc filling welding (SMAW). The mechanical properties and corrosion resistance of the welded joint was also tested and studied. Results indicate that austenite and acicular ferrite distribute uniformly in the weld metal, which strengths the toughness and ductility of the joint. The austenite content in weld is higher than that in over-heated zone of S31803.The SMAW joint structure is coarsening than that of GTAW and has more austenite content. It is also observed that there are a decarburization layer and a carbon-enriched zone nearby the fusion line. And very small amounts of the third phase of harmful metal phase are found in the fusion zone of S31803 side. The welded joint shows the excellent mechanical properties and corrosion resistance. The impact toughness of the weld metal is higher than in HAZ of 16MnR side, and the impact toughness at GTAW side and in HAZ is superior to the SMAW side.

Effect of transformation texture on the impact toughness of hot-rolled Ti + Nb microalloyed steel

2017 ◽  
Vol 128 ◽  
pp. 86-97 ◽  
Author(s):  
K.N. Sasidhar ◽  
T. Dhande ◽  
N. Javed ◽  
A. Ghosh ◽  
M. Mukherjee ◽  
...  
Keyword(s):  
Impact Toughness ◽  
Microalloyed Steel ◽  
Transformation Texture ◽  
Nb Microalloyed Steel ◽  
Hot Rolled ◽  
The Impact

scholarly journals Microstructure and Impact Toughness of Local-Dry Keyhole Tungsten Inert Gas Welded Joints

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1638 ◽  
Author(s):  
Shuwan Cui ◽  
Zhiyong Xian ◽  
Yonghua Shi ◽  
Baoyi Liao ◽  
Tao Zhu
Keyword(s):  
Impact Toughness ◽  
Weld Metal ◽  
Welded Joint ◽  
Coincidence Site Lattice ◽  
Random Phase ◽  
Inert Gas ◽  
Phase Boundaries ◽  
Site Lattice ◽  
Underwater Welding ◽  
The Impact

In this paper, the microstructure and impact toughness of a S32101 duplex stainless steel underwater local-dry keyhole tungsten inert gas welded joint were studied. The impact toughness value of the underwater weld metal reached 78% of the onshore weld metal, which is in accordance with the underwater welding standards. The proportion of austenite in the underwater weld metal was 0.9% lower than that of the onshore weld metal. The proportion of the Σ3 coincidence site lattice boundaries and random phase boundaries in the underwater weld metal, which significantly influence the impact toughness of the weld metal, were smaller than that of the onshore weld metal.

Effect of Ti on the Microstructures and Toughness of TMCP-600 Steel Weld Metals

2013 ◽  
Vol 746 ◽  
pp. 462-466
Author(s):  
Jin Hyun Koh ◽  
Bok Su Jang
Keyword(s):  
Weld Metal ◽  
Impact Energy ◽  
Acicular Ferrite ◽  
Gas Metal Arc Welding ◽  
Control Process ◽  
High Strength ◽  
Weld Metal Microstructure ◽  
Metal Microstructure ◽  
The Impact ◽  
Ti Content

The Ti addition effect on the characteristics of weld metal, such as impact energy, microstructure and nonmetallic inclusions, was investigated to develop a suitable gas metal arc welding wire for the high strength of TMCP (Thermo Mechanical Control Process)-600 steel. The fraction of acicular ferrite which was known to be a favorable weld metal microstructure for toughness was increased with Ti content from 0.002% to 0.025%, The impact energy of weld metal was increased whereas the ductile to brittle transition temperature was decreased with increasing Ti content. The size of nonmetallic inclusion was decreased while the density of inclusions was decreased with increasing Ti content. It was found that Ti content on the weld metal toughness had a plus effect by increasing the fraction of acicular ferrite in the weld metal microstructure.

Sign in / Sign up

Export Citation Format

Share Document