scholarly journals Physiological and perceptual responses to training and competition in elite female netball players

2021 ◽  
Author(s):  
◽  
Laurence Birdsey
Keyword(s):  
Strength Training ◽  
Power Output ◽  
Peak Power ◽  
Peak Velocity ◽  
Training Session ◽  
Peak Power Output ◽  
Jump Height ◽  
Match Play ◽  
Neuromuscular Performance ◽  
The Impact

Few studies have reported the physical demands of, and physiological responses to, training and competition in international netball players. This thesis set out to investigate this in female players via a series of studies. Study one characterised the playing demands of international match-play, and the physiological and perceptual responses to an international netball tournament. Mid-court performed at a higher Player LoadTM (mean difference ± standard deviation: 85.7% ± 49.6%), and internal intensity (mean heart rate: 3.7% ± 3.8%) than goal-based positions. Neuromuscular performance decreased after a single match (jump height: 4.0% ± 2.5%) whilst markers of muscle damage, soreness and perceived fatigue accumulated across the tournament. Study two characterised the physiological and perceptual responses to a regularly performed netball-training session. Neuromuscular performance was enhanced immediately post-exercise (Cohen’s d effect size, percent change: peak power output: 0.47, 5%), returned to baseline two hours post, and was reduced 24 h post-training (peak power output: 0.27, 3%; jump height: 0.39, 6%). Study three investigated the effect of training-session order. Performing netball prior to strength training resulted in enhanced neuromuscular performance two hours post-training (peak power output: 1.2, 5%; jump height: 1.2, 9%; peak velocity: 1.0, 3%), whilst strength followed by netball reduced neuromuscular performance at 20 h post (peak power output: 1.1, 4%; jump height: 1.4, 10%; peak velocity: 1.4, 4%). This thesis provides a detailed investigation in to the responses to netball training and competition, as well as the impact of training-session order on neuromuscular, perceptual and endocrine responses over 20 h. Training should be individualised to condition players for the positional-specific external and internal demands of international match-play. To optimise training performance, two hours post-training could be a more favourable time to perform explosive training than the following day, whilst technical netball training should precede strength training when both sessions are performed within the same training day.

Reducing Anxiety and Anxiety Sensitivity With High-Intensity Interval Training in Adults With Asthma

2020 ◽  
Vol 17 (8) ◽  
pp. 835-839
Author(s):  
Carley O’Neill ◽  
Shilpa Dogra
Keyword(s):  
Anxiety Sensitivity ◽  
Power Output ◽  
High Intensity ◽  
Peak Power ◽  
Interval Training ◽  
Peak Power Output ◽  
Sensitivity Index ◽  
High Intensity Interval Training ◽  
High Intensity Interval ◽  
The Impact

Background: Low- and moderate-intensity exercise training has been shown to be effective for reducing general anxiety and anxiety sensitivity among adults with asthma. Exercise frequency and intensity have been shown to play an integral role in reducing anxiety sensitivity; however, less is known about the impact of high-intensity interval training (HIIT) on anxiety in adults with asthma. Methods: A 6-week HIIT intervention was conducted with adults with asthma. Participants completed HIIT (10% peak power output for 1 min, 90% peak power output for 1 min, repeated 10 times) 3 times per week on a cycle ergometer. Preintervention and postintervention assessments included the Anxiety Sensitivity Index-3 and the Body Sensations Questionnaire. Results: Total Anxiety Sensitivity Index-3 (PRE: 17.9 [11.8]; POST 12.4 [13], P = .002, Cohen d = 0.4, n = 20) and Body Sensations Questionnaire (PRE: 2.4 [1.0]; POST: 2.0 [0.8], P = .007, Cohen d = 0.3) improved from preintervention to postintervention. Conclusion: A 6-week HIIT intervention leads to improved anxiety among adults with asthma. Future research should determine the impact of HIIT among adults with asthma with clinical anxiety.

Power– and velocity–load relationships to improve resistance exercise performance

2018 ◽  
Vol 232 (4) ◽  
pp. 349-359 ◽  
Author(s):  
Manuel V Garnacho-Castaño ◽  
Arturo Muñoz-González ◽  
María A Garnacho-Castaño ◽  
José L Maté-Muñoz
Keyword(s):  
Power Output ◽  
Peak Power ◽  
Bench Press ◽  
Peak Velocity ◽  
Peak Power Output ◽  
Mean Power ◽  
Mean Velocity ◽  
Maximal Power Output ◽  
Power Load ◽  
The Military

Knowledge of the power– and velocity–load relationships is a key factor to guide loads during resistance training and optimize sports performance. This study compares mean velocity–, peak velocity– and power–load relationships, and determines the load which elicits maximal power output in the military press and bench press. Fifty-seven healthy, active men were randomly assigned to a bench press (n = 28) or military press (n = 29) group. In separate test sessions, concentric-only or eccentric-concentric sequences of each exercise were performed in random order as incremental isoinertial load tests. Both mean velocity and peak velocity were highly related with the load lifted (% 1RM) in both bench press and military press (mean velocity: R2 = 0.94 and 0.95; peak velocity: R2 = 0.93 and 0.93, respectively). The loads maximizing mean power and peak power output were similar for the eccentric-concentric versus concentric sequences in bench press and military press. The loads maximizing mean power and peak power were between 54% and 57.5% 1RM for the bench press and 59.8%–63.1% 1RM for the military press. For the bench press, no significant differences were observed in mean power from 30% to 80% 1RM and peak power from 30% to 95% 1RM. For the military press, no significant differences were observed in mean power from 40% to 80% 1RM and peak power from 30% to 90%/95% 1RM. The close relationship detected between mean velocity or peak velocity and load means that the % 1RM can be estimated according to mean velocity and peak velocity. In both exercises, a broad range of relative intensities could be used at which power output is not significantly different than that at maximized power output (mean = 30%/40%–80% 1RM; peak = 30%–90%/95%). Mean velocity lower than approximately 0.33 m s−1 for bench press and 0.4 m s−1 for military press, as well as peak velocity lower than approximately 0.4 m s−1 for bench press and 0.5 m s−1 for military press do not optimize power output responses. The eccentric action was a determining factor for increasing power output only in bench press.

scholarly journals Preexercise Cycling Protocol Alters Pacing Behavior in Competitive Time Trials

2020 ◽  
Vol 15 (9) ◽  
pp. 1303-1308
Author(s):  
Marco J. Konings ◽  
Florentina J. Hettinga
Keyword(s):  
Power Output ◽  
Repeated Measures ◽  
Peak Power ◽  
Perceived Exertion ◽  
Time Trial ◽  
Cycle Ergometer ◽  
Peak Power Output ◽  
Experimental Conditions ◽  
And Performance ◽  
The Impact

Purpose: The behavior of an opponent has been shown to alter pacing and performance. To advance our understanding of the impact of perceptual stimuli such as an opponent on pacing and performance, this study examined the effect of a preexercise cycling protocol on exercise regulation with and without an opponent. Methods: Twelve trained cyclists performed 4 experimental, self-paced 4-km time-trial conditions on an advanced cycle ergometer in a randomized, counterbalanced order. Participants started the time trial in rested state (RS) or performed a 10-min cycling protocol at 67% peak power output (CP) before the time trial. During the time trials, participants had to ride alone (NO) or against a virtual opponent (OP). The experimental conditions were (1) RS-NO, (2) RS-OP, (3) CP-NO, and (4) CP-OP. Repeated-measures analyses of variance (P < .05) were used to examine differences in pacing and performance in terms of power output. Results: A faster pace was adopted in the first kilometer during RS-OP (318 [72] W) compared with RS-NO (291 [81] W; P = .03), leading to an improved finishing time during RS-OP compared with RS-NO (P = .046). No differences in either pacing or performance were found between CP-NO and CP-OP. Conclusions: The evoked response by the opponent to adopt a faster initial pace in the 4-km time trial disappeared when cyclists had to perform a preceding cycling protocol. The outcomes of this study highlight that perceived exertion alters the responsiveness to perceptual stimuli of cyclists during competition.

Between-Match Variability of Peak Power Output and Creatine Kinase Responses to Soccer Match-Play

2015 ◽  
Vol 29 (8) ◽  
pp. 2079-2085 ◽  
Author(s):  
Mark Russell ◽  
Jonny Northeast ◽  
Greg Atkinson ◽  
David A. Shearer ◽  
William Sparkes ◽  
...  
Keyword(s):  
Creatine Kinase ◽  
Power Output ◽  
Peak Power ◽  
Peak Power Output ◽  
Match Play ◽  
Soccer Match

Power-Time, Force-Time, and Velocity-Time Curve Analysis during the Jump Squat: Impact of Load

2008 ◽  
Vol 24 (2) ◽  
pp. 112-120 ◽  
Author(s):  
Prue Cormie ◽  
Jeffrey M. McBride ◽  
Grant O. McCaulley
Keyword(s):  
Body Mass ◽  
Power Output ◽  
Peak Power ◽  
Peak Power Output ◽  
Power Development ◽  
Time Curve ◽  
Force Time ◽  
The Impact ◽  
External Loads ◽  
Male Subjects

The purpose of this investigation was to examine the impact of load on the power-, force- and velocity-time curves during the jump squat. The analysis of these curves for the entire movement at a sampling frequency of 200–500 Hz averaged across 18 untrained male subjects is the most novel aspect of this study. Jump squat performance was assessed in a randomized fashion across five different external loads: 0, 20, 40, 60, and 80 kg (equivalent to 0 ± 0, 18 ± 4, 37 ± 8, 55 ± 12, 74 ± 15% of 1RM, respectively). The 0-kg loading condition (i.e., body mass only) was the load that maximized peak power output, displaying a significantly (p≤ .05) greater value than the 40, 60, and 80 kg loads. The shape of the force-, power-, and velocity-time curves changed significantly as the load applied to the jump squat increased. There was a significantly greater rate of power development in the 0 kg load in comparison with all other loads examined. As the first comprehensive illustration of how the entire power-, force-, and velocity-time curves change across various loading conditions, this study provides extensive evidence that a load equaling an individuals body mass (i.e., external load = 0 kg) maximizes power output in untrained individuals during the jump squat.

scholarly journals Sex-Related Changes in Physical Performance, Well-Being, and Neuromuscular Function of Elite Touch Players During a 4-Day International Tournament

2020 ◽  
Vol 15 (8) ◽  
pp. 1138-1146
Author(s):  
Nick Dobbin ◽  
Cari Thorpe ◽  
Jamie Highton ◽  
Craig Twist
Keyword(s):  
Physical Performance ◽  
Power Output ◽  
Peak Power ◽  
Well Being ◽  
Neuromuscular Function ◽  
Peak Force ◽  
Peak Power Output ◽  
Jump Height ◽  
Countermovement Jump ◽  
Males And Females

Purpose: To examine the within- and between-sexes physical performance, well-being, and neuromuscular function responses across a 4-day international touch rugby (Touch) tournament. Methods: Twenty-one males and 20 females completed measures of well-being (fatigue, soreness, sleep, mood, and stress) and neuromuscular function (countermovement jump height, peak power output, and peak force) during a 4-day tournament with internal, external, and perceptual loads recorded for all matches. Results: Relative and absolute total, low-intensity (females), and high-intensity distance were lower on day 3 (males and females) (effect size [ES] = −0.37 to −0.71) compared with day 1. Mean heart rate was possibly to most likely lower during the tournament (except day 2 males; ES = −0.36 to −0.74), whereas rating of perceived exertion-training load was consistently higher in females (ES = 0.02 to 0.83). The change in mean fatigue, soreness, and overall well-being was unclear to most likely lower (ES = −0.33 to −1.90) across the tournament for both sexes, with greater perceived fatigue and soreness in females on days 3 to 4 (ES = 0.39 to 0.78). Jump height and peak power output were possibly to most likely lower across days 2 to 4 (ES = −0.30 to −0.84), with greater reductions in females (ES = 0.21 to 0.66). Well-being, countermovement jump height, and peak force were associated with changes in external, internal, and perceptual measures of load across the tournament (η2 = −.37 to .39). Conclusions: Elite Touch players experience reductions in well-being, neuromuscular function, and running performance across a 4-day tournament, with notable differences in fatigue and running between males and females, suggesting that sex-specific monitoring and intervention strategies are necessary.

Relationships between match activities and peak power output and Creatine Kinase responses to professional reserve team soccer match-play

2016 ◽  
Vol 45 ◽  
pp. 96-101 ◽  
Author(s):  
M. Russell ◽  
W. Sparkes ◽  
J. Northeast ◽  
C.J. Cook ◽  
R.M. Bracken ◽  
...  
Keyword(s):  
Creatine Kinase ◽  
Power Output ◽  
Peak Power ◽  
Peak Power Output ◽  
Match Play ◽  
Soccer Match

Abstract P134: Preliminary Data: Dietary Nitrate Supplementation Does Not Extend Dry Static Apnea Or Wingate Performance

Circulation ◽  
2021 ◽  
Vol 143 (Suppl_1) ◽  
Author(s):  
Colin Carriker ◽  
Phillip Armentrout ◽  
Sarah Levine ◽  
James Smoliga
Keyword(s):  
Power Output ◽  
Preliminary Data ◽  
Repeated Measures ◽  
Peak Power ◽  
Hold Time ◽  
Wingate Test ◽  
Peak Power Output ◽  
Breath Hold ◽  
Dietary Nitrate ◽  
Nitrate Supplementation

Introduction: Previous studies have examined dietary nitrate supplementation and its effects on dry static apnea, and peak power. Dietary nitrate supplementation has been found to increase maximal apnea and peak power output. The purpose of this study was to determine the effects of beetroot juice on dry static apnea and Wingate performance. Hypothesis: Dietary nitrate will improve maximal breath hold time and peak power output. Dietary nitrate will improve tolerance to CO2, thereby improving maximal breath hold time and anaerobic capacity. Methods: In a randomized, double-blind, counterbalanced study, five healthy males (20.4±0.89 years) visited the lab on 3 separate occasions each separated by one week. Visit 1 served as a Wingate and breath hold familiarization visit. Prior to visits 2 and 3 participants were instructed to drink a beverage either a placebo (negligible nitrate content, PL) or dietary nitrate rich beverage (12.4 mmol nitrate, NIT) during the 4 days leading up to their next visit. Visits 2 and 3 consisted of two submaximal breath holds (80% of maximal determined during visit 1), with 2 minutes of rest between and three minutes of rest preceding the final breath hold for maximal duration. Finally, participants completed a standardized 10-minute warmup on the cycle ergometer before completing a 30-second maximal effort Wingate test. Results: A linear mixed effects model was used to determine whether treatment (NIT vs. PL) was associated with differences in VCO2 or PetCO2. Time (0, 10, 20, 30 min post-breath hold) and Treatment both served as repeated measures. Models were developed using multiple repeated measures covariance matrix structures, and the model with the lowest AIC was chosen as the final model. The interaction between time and treatment was included in the original models, and was removed if it was not statistically significant. Time was a statistically significant factor for VCO2 and PetCO2 (p < 0.001). Treatment, and the Time x Treatment interaction was not significant for either variable. No differences between NIT and PL were observed during the Wingate test for either time to peak power (5.02±2.45 and 6.2±2.43 sec, respectively) or maximal power (9.73±1.01 and 9.72±1.03 watts/kg, respectively) and fatigue index (49.42±14.98 and 47.30±6.99 watts/sec, respectively). Conclusion: Preliminary data indicates that in a general population four days of dietary nitrate supplementation may not improve breath hold time, tolerance to carbon dioxide in the lungs, or Wingate performance.

Force-velocity and force-power properties of single muscle fibers from elite master runners and sedentary men

1996 ◽  
Vol 271 (2) ◽  
pp. C676-C683 ◽  
Author(s):  
J. J. Widrick ◽  
S. W. Trappe ◽  
D. L. Costill ◽  
R. H. Fitts
Keyword(s):  
Myosin Heavy Chain ◽  
Heavy Chain ◽  
Power Output ◽  
Peak Power ◽  
Isometric Force ◽  
Peak Force ◽  
Peak Power Output ◽  
Type I ◽  
Shortening Velocity ◽  
Force Velocity

Gastrocnemius muscle fiber bundles were obtained by needle biopsy from five middle-aged sedentary men (SED group) and six age-matched endurance-trained master runners (RUN group). A single chemically permeabilized fiber segment was mounted between a force transducer and a position motor, subjected to a series of isotonic contractions at maximal Ca2+ activation (15 degrees C), and subsequently run on a 5% polyacrylamide gel to determine myosin heavy chain composition. The Hill equation was fit to the data obtained for each individual fiber (r2 > or = 0.98). For the SED group, fiber force-velocity parameters varied (P < 0.05) with fiber myosin heavy chain expression as follows: peak force, no differences: peak tension (force/fiber cross-sectional area), type IIx > type IIa > type I; maximal shortening velocity (Vmax, defined as y-intercept of force-velocity relationship), type IIx = type IIa > type I; a/Pzero (where a is a constant with dimensions of force and Pzero is peak isometric force), type IIx > type IIa > type I. Consequently, type IIx fibers produced twice as much peak power as type IIa fibers, whereas type IIa fibers produced about five times more peak power than type I fibers. RUN type I and IIa fibers were smaller in diameter and produced less peak force than SED type I and IIa fibers. The absolute peak power output of RUN type I and IIa fibers was 13 and 27% less, respectively, than peak power of similarly typed SED fibers. However, type I and IIa Vmax and a/Pzero were not different between the SED and RUN groups, and RUN type I and IIa power deficits disappeared after power was normalized for differences in fiber diameter. Thus the reduced absolute peak power output of the type I and IIa fibers from the master runners was a result of the smaller diameter of these fibers and a corresponding reduction in their peak isometric force production. This impairment in absolute peak power production at the single fiber level may be in part responsible for the reduced in vivo power output previously observed for endurance-trained athletes.

Sign in / Sign up

Export Citation Format

Share Document