LPG sensing investigation of (Sn-Ti)O2 system based nanocomposite at Room Temperature

2016 ◽  
pp. 3252-3264
Author(s):  
Tripti Shukla ◽  
S.K. Omanwar
Keyword(s):  
Thick Film ◽  
Room Temperature ◽  
Response Times ◽  
Film Surface ◽  
Pure Tio2 ◽  
Sem Image ◽  
Lpg Sensor ◽  
Screen Printing Technique ◽  
And Performance ◽  
Gas Chamber

Present work reports the synthesis of pure TiO2 and (Sn-Ti)O2 nanocomposite, its characterization and performance asLiquefied Petroleum Gas (LPG) Sensor. Thick films of both the materials were prepared by using screen printing technique. After that these were investigated through SEM. SEM image of pure TiO2 shows that grains are random in shape having pores. The grains observed on the (Sn-Ti)O2 thick-film surface are spherical in shape and more porous than pure TiO2. Further at room temperature, the films were exposed to LPG in a controlled gas chamber and variations in resistance with the concentrations of LPG were observed. The maximum value of average sensitivity for pure TiO2 and (Sn-Ti)O2 thick-film were found 3.0 and 11 respectively for 2 vol.% of LPG. Sensor responses as a function of exposure and response times were also estimated and maximum sensor response for pure TiO2 and (Sn-Ti)O2 thick-film were found 207 and 1040 respectively.

Fabrication and performance of polypyrrole (Ppy)/TiO2 heterojunction for room temperature operated LPG sensor

2013 ◽  
Vol 181 ◽  
pp. 417-423 ◽  
Author(s):  
R.N. Bulakhe ◽  
S.V. Patil ◽  
P.R. Deshmukh ◽  
N.M. Shinde ◽  
C.D. Lokhande
Keyword(s):  
Room Temperature ◽  
Lpg Sensor ◽  
And Performance

Animal Recognition and Eye Movements

2010 ◽  
Vol 57 (2) ◽  
pp. 117-125 ◽  
Author(s):  
Toby J. Lloyd-Jones ◽  
Juergen Gehrke ◽  
Jason Lauder
Keyword(s):  
Eye Movements ◽  
Response Times ◽  
Real Life ◽  
Object Orientation ◽  
Decision Task ◽  
Line Drawings ◽  
Object Decision ◽  
Individual Features ◽  
And Performance

We assessed the importance of outline contour and individual features in mediating the recognition of animals by examining response times and eye movements in an animal-object decision task (i.e., deciding whether or not an object was an animal that may be encountered in real life). There were shorter latencies for animals as compared with nonanimals and performance was similar for shaded line drawings and silhouettes, suggesting that important information for recognition lies in the outline contour. The most salient information in the outline contour was around the head, followed by the lower torso and leg regions. We also observed effects of object orientation and argue that the usefulness of the head and lower torso/leg regions is consistent with a role for the object axis in recognition.

Laser Engineering of Barrier Structures Based on Solid Solution ZnCdHgTe.

2002 ◽  
Vol 719 ◽  
Author(s):  
Galina Khlyap
Keyword(s):  
Room Temperature ◽  
Film Surface ◽  
Charge Carriers ◽  
Barrier Structure ◽  
Free Charge ◽  
Current Voltage ◽  
Capacitance Voltage ◽  
Laser Engineering ◽  
Charged Defects ◽  
Epilayer Surface

AbstractRoom-temperature electric investigations carried out in CO2-laser irradiated ZnCdHgTe epifilms revealed current-voltage and capacitance-voltage dependencies typical for the metal-semiconductor barrier structure. The epilayer surface studies had demonstrated that the cell-like relief has replaced the initial tessellated structure observed on the as-grown samples. The detailed numerical analysis of the experimental measurements and morphological investigations of the film surface showed that the boundaries of the cells formed under the laser irradiation are appeared as the regions of accumulation of derived charged defects of different type of conductivity supplying free charge carriers under the applied electric field.

scholarly journals FEM Simulation of Frequency-Selective Surface Based on Thermoelectric Bi-Sb Thin Films for THz Detection

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 119
Author(s):  
Anastasiia Tukmakova ◽  
Ivan Tkhorzhevskiy ◽  
Artyom Sedinin ◽  
Aleksei Asach ◽  
Anna Novotelnova ◽  
...  
Keyword(s):  
Thin Films ◽  
Response Times ◽  
Fem Simulation ◽  
Film Surface ◽  
Frequency Selective Surface ◽  
Fast Response ◽  
Radiation Absorption ◽  
Thz Radiation ◽  
Frequency Filter ◽  
Frequency Selective

Terahertz (THz) filters and detectors can find a wide application in such fields as: sensing, imaging, security systems, medicine, wireless connection, and detection of substances. Thermoelectric materials are promising basis for THz detectors’ development due to their sensitivity to the THz radiation, possibility to be heated under the THz radiation and produce voltage due to Seebeck effect. Thermoelectric thin films of Bi-Sb solid solutions are semimetals/semiconductors with the band gap comparable with THz energy and with high thermoelectric conversion efficiency at room temperature. Detecting film surface can be transformed into a periodic frequency selective surface (FSS) that can operate as a frequency filter and increases the absorption of THz radiation. We report for the first time about the simulation of THz detector based on thermoelectric Bi-Sb thin-filmed frequency-selective surface. We show that such structure can be both detector and frequency filter. Moreover, it was shown that FSS design increases not only a heating due to absorption but a temperature gradient in Bi-Sb film by two orders of magnitude in comparison with continuous films. Local temperature gradients can reach the values of the order of 100 K·mm−1. That opens new perspectives for thin-filmed thermoelectric detectors’ efficiency increase. Temperature difference formed due to THz radiation absorption can reach values on the order of 1 degree. Frequency-transient calculations show the power dependence of film temperature on time with characteristic saturation at times around several ms. That points to the perspective of reaching fast response times on such structures.

scholarly journals Visual search behavior and performance in luggage screening: effects of time pressure, automation aid, and target expectancy

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Tobias Rieger ◽  
Lydia Heilmann ◽  
Dietrich Manzey
Keyword(s):  
Visual Search ◽  
Target Location ◽  
Time Pressure ◽  
Response Times ◽  
Search Behavior ◽  
High Time ◽  
Luggage Screening ◽  
Negative Effect ◽  
And Performance ◽  
Automated Support

AbstractVisual inspection of luggage using X-ray technology at airports is a time-sensitive task that is often supported by automated systems to increase performance and reduce workload. The present study evaluated how time pressure and automation support influence visual search behavior and performance in a simulated luggage screening task. Moreover, we also investigated how target expectancy (i.e., targets appearing in a target-often location or not) influenced performance and visual search behavior. We used a paradigm where participants used the mouse to uncover a portion of the screen which allowed us to track how much of the stimulus participants uncovered prior to their decision. Participants were randomly assigned to either a high (5-s time per trial) or a low (10-s time per trial) time-pressure condition. In half of the trials, participants were supported by an automated diagnostic aid (85% reliability) in deciding whether a threat item was present. Moreover, within each half, in target-present trials, targets appeared in a predictable location (i.e., 70% of targets appeared in the same quadrant of the image) to investigate effects of target expectancy. The results revealed better detection performance with low time pressure and faster response times with high time pressure. There was an overall negative effect of automation support because the automation was only moderately reliable. Participants also uncovered a smaller amount of the stimulus under high time pressure in target-absent trials. Target expectancy of target location improved accuracy, speed, and the amount of uncovered space needed for the search.Significance Statement Luggage screening is a safety–critical real-world visual search task which often has to be done under time pressure. The present research found that time pressure compromises performance and increases the risk to miss critical items even with automation support. Moreover, even highly reliable automated support may not improve performance if it does not exceed the manual capabilities of the human screener. Lastly, the present research also showed that heuristic search strategies (e.g., areas where targets appear more often) seem to guide attention also in luggage screening.

Influence of Momentary Annealing on the Nanoscale Surface Morphology of Room Temperature Pulsed Laser Deposited NiO(111) Epitaxial Thin Films on Atomically Stepped Sapphire (0001) Substrates

2013 ◽  
Vol 1507 ◽  
Author(s):  
Ryosuke Yamauchi ◽  
Geng Tan ◽  
Daishi Shiojiri ◽  
Nobuo Tsuchimine ◽  
Koji Koyama ◽  
...  
Keyword(s):  
Thin Films ◽  
Surface Morphology ◽  
Room Temperature ◽  
Pulsed Laser ◽  
Film Surface ◽  
Transient State ◽  
Epitaxial Thin Films ◽  
Flat Surfaces ◽  
Surface Nanostructure ◽  
Atomically Flat

ABSTRACTWe examined the influence of momentary annealing on the nanoscale surface morphology of NiO(111) epitaxial thin films deposited on atomically stepped sapphire (0001) substrates at room temperature in O2 at 1.3 × 10−3 and 1.3 × 10−6 Pa using a pulsed laser deposition (PLD) technique. The NiO films have atomically flat surfaces (RMS roughness: approximately 0.1–0.2 nm) reflecting the step-and-terrace structures of the substrates, regardless of the O2 deposition pressure. After rapid thermal annealing (RTA) of the NiO(111) epitaxial film deposited at 1.3 × 10−3 Pa O2, a periodic straight nanogroove array related to the atomic steps of the substrate was formed on the film surface for 60 s. In contrast, the fabrication of a transient state in the nanogroove array formation was achieved with RTA of less than 1 s. However, when the O2 atmosphere during PLD was 1.3 × 10−6 Pa, random crystal growth was observed and resulted in a disordered rough surface nanostructure after RTA.

scholarly journals Three-dimensional platinum nanoparticle-based bridges for ammonia gas sensing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nishchay A. Isaac ◽  
Johannes Reiprich ◽  
Leslie Schlag ◽  
Pedro H. O. Moreira ◽  
Mostafa Baloochi ◽  
...  
Keyword(s):  
Room Temperature ◽  
Gas Sensing ◽  
Response Times ◽  
High Surface ◽  
Three Dimensional ◽  
Performance Testing ◽  
Volume Ratio ◽  
Platinum Nanoparticle ◽  
Ammonia Gas ◽  
Lift Off

AbstractThis study demonstrates the fabrication of self-aligning three-dimensional (3D) platinum bridges for ammonia gas sensing using gas-phase electrodeposition. This deposition scheme can guide charged nanoparticles to predetermined locations on a surface with sub-micrometer resolution. A shutter-free deposition is possible, preventing the use of additional steps for lift-off and improving material yield. This method uses a spark discharge-based platinum nanoparticle source in combination with sequentially biased surface electrodes and charged photoresist patterns on a glass substrate. In this way, the parallel growth of multiple sensing nodes, in this case 3D self-aligning nanoparticle-based bridges, is accomplished. An array containing 360 locally grown bridges made out of 5 nm platinum nanoparticles is fabricated. The high surface-to-volume ratio of the 3D bridge morphology enables fast response and room temperature operated sensing capabilities. The bridges are preconditioned for ~ 24 h in nitrogen gas before being used for performance testing, ensuring drift-free sensor performance. In this study, platinum bridges are demonstrated to detect ammonia (NH3) with concentrations between 1400 and 100 ppm. The sensing mechanism, response times, cross-sensitivity, selectivity, and sensor stability are discussed. The device showed a sensor response of ~ 4% at 100 ppm NH3 with a 70% response time of 8 min at room temperature.

Sign in / Sign up

Export Citation Format

Share Document