scholarly journals Differences in fungal contamination of broiler litter between summer and winter fattening periods

2021 ◽  
Vol 72 (3) ◽  
pp. 140-147
Author(s):  
Mario Ostović ◽  
Ivica Ravić ◽  
Matija Kovačić ◽  
Anamaria Ekert Kabalin ◽  
Kristina Matković ◽  
...  
Keyword(s):  
Harmful Effect ◽  
Poultry Litter ◽  
Commercial Production ◽  
Farm Workers ◽  
Fungal Contamination ◽  
Highly Correlated ◽  
Total Fungi ◽  
And Control ◽  
Production Conditions ◽  
Winter Fattening

Abstract This study aimed to compare fungal contamination of poultry litter between warm and cold seasons. It was carried out in commercial production conditions over two five-week fattening periods: one in the summer (July-August) and one in the winter (December-January). Broilers were reared on a litter composed of chopped straw and sawdust. Litter fungal concentration and composition were investigated weekly, along with litter temperature, moisture, and pH. Litter concentration of total fungi increased over both fattening periods, with no differences in median concentrations between them. Season also had no effect on yeast, Aspergillus section Nigri, and Cladosporium, Fusarium, and Rhizopus spp. concentrations, while the Aspergillus section Flavi and Aspergillus spp. combined showed higher concentrations in the summer, and Mucor and Penicillium spp. in the winter. Total fungal concentration highly correlated with litter temperature, moisture, and pH, regardless of the season. Our findings can be useful in the assessment and control of potential harmful effect of fungi on the health of poultry and poultry farm workers.

scholarly journals Detection of Antimicrobial Residues in Poultry Litter: Monitoring a Risk through a Selective and Sensitive HPLC–MS/MS Method

Animals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1399
Author(s):  
Karina Yévenes ◽  
Ekaterina Pokrant ◽  
Lina Trincado ◽  
Lisette Lapierre ◽  
Nicolás Galarce ◽  
...  
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Poultry Litter ◽  
Chromatography Tandem Mass Spectrometry ◽  
Antimicrobial Residues ◽  
Field Samples ◽  
Liquid Chromatography Tandem Mass ◽  
Commercial Poultry ◽  
Agriculture Fertilizer ◽  
And Control

Tetracyclines, sulphonamides, and quinolones are families of antimicrobials (AMs) widely used in the poultry industry and can excrete up to 90% of AMs administrated, which accumulate in poultry litter. Worryingly, poultry litter is widely used as an agriculture fertilizer, contributing to the spread AMs residues in the environment. The aim of this research was to develop a method that could simultaneously identify and quantify three AMs families in poultry litter by high-performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS). Samples of AMs free poultry litter were used to validate the method according to 657/2002/EC and VICH GL49. Results indicate that limit of detection (LOD) ranged from 8.95 to 20.86 μg kg−1, while limits of quantitation (LOQ) values were between 26.85 and 62.58 µg kg−1 of tetracycline, 4-epi-tetracycline, oxytetracycline, 4-epi-oxytetracycline, enrofloxacin, ciprofloxacin, flumequine, sulfachloropyridazine, and sulfadiazine. Recoveries obtained ranged from 93 to 108%. The analysis of field samples obtained from seven commercial poultry flocks confirmed the adequacy of the method since it detected means concentrations ranging from 20 to 10,364 μg kg−1. This provides us an accurate and reliable tool to monitor AMs residues in poultry litter and control its use as agricultural fertilizer.

scholarly journals Relationships between the Rider’s Pelvic Mobility and Balance on a Gymnastic Ball with Equestrian Skills and Effects on Horse Welfare

Animals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 453
Author(s):  
Mette Uldahl ◽  
Janne W. Christensen ◽  
Hilary M. Clayton
Keyword(s):  
Heart Rate ◽  
Negative Correlation ◽  
Core Stability ◽  
Static Balancing ◽  
Conflict Behaviors ◽  
Video Recordings ◽  
Highly Correlated ◽  
And Control ◽  
Energetic Performance ◽  
Working Heart

Riders need core stability to follow and guide the horse’s movements and avoid giving unintended or conflicting signals. This study evaluated the rider’s performance of exercises on a gymnastic ball with on-horse performance and indicators of stress in the horse. Twenty experienced riders were scored performing three exercises on a gymnastic ball and for quality and harmony when riding based on evaluation of video recordings in which conflict behaviours were evident. The horse’s heart rate and number of conflict behaviors during the riding test and cortisol levels after completion of the test were measured. The rider’s ability to roll the pelvis from side-to-side on a gymnastic ball was highly correlated with ability to circle the pelvis on the ball and with quality and harmony during riding. However, pelvic roll and riding quality and harmony showed a trend toward a negative correlation with balancing skills on the ball. It appears that the ability to actively move the pelvis is more relevant to equestrian performance than static balancing skill. Horses ridden by riders with better pelvic mobility and control showed significantly fewer conflict behaviors. On the contrary, high scores for balancing on the gymnastic ball were negatively correlated with the horses’ working heart rates, suggesting a less energetic performance. Pelvic control and mobility may be predictive for equestrian skills and riding harmony.

Pre-service music teachers' satisfaction: person–environment fit approach

2012 ◽  
Vol 29 (3) ◽  
pp. 371-385 ◽  
Author(s):  
Serkan Perkmen ◽  
Beste Cevik ◽  
Mahir Alkan
Keyword(s):  
Music Education ◽  
Music Teachers ◽  
Music Teacher ◽  
Theoretical Frameworks ◽  
Vocational Satisfaction ◽  
Highly Correlated ◽  
Service Music ◽  
And Control ◽  
Future Work

Guided by three theoretical frameworks in vocational psychology, (i) theory of work adjustment, (ii) two factor theory, and (iii) value discrepancy theory, the purpose of this study was to investigate Turkish pre-service music teachers' values and the role of fit between person and environment in understanding vocational satisfaction. Participants were 85 students enrolled in the department of music education in a Turkish university. The Minnesota Importance Questionnaire (MIQ) was used to examine the participants’ values in six dimensions: achievement, comfort, status, altruism, safety and autonomy. Results revealed that the pre-service teachers value achievement most followed by autonomy, which suggests that they would like to have a sense of accomplishment and control in their future job. The degree to which their values fit their predictions about future work environment was found to be highly correlated with vocational satisfaction. These results provided evidence that the vocational theories used in the current study offers a helpful and different perspective to understand the pre-service teachers' satisfaction with becoming a music teacher in the future. We believe that researchers in the field of music education may use these theories and MIQ to examine the role of values in pre-service and in-service music teachers' job satisfaction.

scholarly journals Foaming of rhamnolipids fermentation: impact factors and fermentation strategies

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Zhijin Gong ◽  
Ge Yang ◽  
Chengchuan Che ◽  
Jinfeng Liu ◽  
Meiru Si ◽  
...  
Keyword(s):  
Production Process ◽  
Large Scale ◽  
Commercial Production ◽  
Impact Factors ◽  
Scale Production ◽  
Large Scale Production ◽  
Foaming Behavior ◽  
Production Strategies ◽  
Potential Applications ◽  
And Control

AbstractRhamnolipids have recently attracted considerable attentions because of their excellent biosurfactant performance and potential applications in agriculture, environment, biomedicine, etc., but severe foaming causes the high cost of production, restraining their commercial production and applications. To reduce or eliminate the foaming, numerous explorations have been focused on foaming factors and fermentation strategies, but a systematic summary and discussion are still lacking. Additionally, although these studies have not broken through the bottleneck of foaming, they are conducive to understanding the foaming mechanism and developing more effective rhamnolipids production strategies. Therefore, this review focuses on the effects of fermentation components and control conditions on foaming behavior and fermentation strategies responded to the severe foaming in rhamnolipids fermentation and systematically summarizes 6 impact factors and 9 fermentation strategies. Furthermore, the potentialities of 9 fermentation strategies for large-scale production are discussed and some further strategies are suggested. We hope this review can further facilitate the understanding of foaming factors and fermentation strategies as well as conducive to developing the more effective large-scale production strategies to accelerate the commercial production process of rhamnolipids.

Powder Metallurgy Aluminum Alloys: Structure and Porosity

2019 ◽  
Author(s):  
Will Judge ◽  
Georges Kipouros
Keyword(s):  
Powder Metallurgy ◽  
Aluminum Alloys ◽  
Material Properties ◽  
Cost Effective ◽  
High Reactivity ◽  
Commercial Production ◽  
Processing Conditions ◽  
Near Net Shape ◽  
And Performance ◽  
Production Conditions

The production of aluminum alloys through powder metallurgy (PM) processes allows for the manufacture of net- or near-net-shape components in a cost-effective and sustainable manner. The high reactivity of aluminum metal, however, complicates PM processing, and special attention must be given to certain steps during production, particularly sintering. PM processing conditions strongly affect the structure and porosity of aluminum PM alloys, which ultimately determine their material properties and performance. In this article, the fundamental aspects of the commercial production of aluminum PM alloys are presented, along with the effects of production conditions on the structure and porosity of aluminum PM alloys. The properties and performance of aluminum PM alloys are then analyzed and interpreted with respect to their structure and porosity.

Optimising reproductive management to maximise dairy herd health and production

2021 ◽  
pp. 191-230
Author(s):  
Norman B. Williamson ◽  
Keyword(s):  
Reproductive Health ◽  
Reproductive Performance ◽  
Dairy Herd ◽  
Farm Workers ◽  
Herd Health ◽  
Breeding Programs ◽  
Reproductive Management ◽  
And Control

Reproduction is central to the operation of a dairy herd through initiating lactation and providing replacement animals and offspring for sale. This chapter outlines the steps required to detect reproductive problems and limitations in cows and herds. It then elaborates some strategies to overcome limits to reproductive health and production concentrating on detecting cows requiring attention through record monitoring, analysing herd records to monitor reproduction and identify areas that limit performance and providing strategies to deal with these limits. The main limits addressed are anoestrus and inadequate oestrus detection that are addressed through education of farm workers, aids to oestrus detection and the use of planned breeding programs to induce and control oestrus and breeding. Nutritional causes of limited reproductive performance are also considered as well as strategies to limit abortion.

Modeling and control of a mobile manipulator

Robotica ◽  
1998 ◽  
Vol 16 (6) ◽  
pp. 607-613 ◽  
Author(s):  
J. H. Chung ◽  
S. A. Velinsky
Keyword(s):  
Dynamic Model ◽  
Control Method ◽  
Harmful Effect ◽  
Euler Method ◽  
Friction Model ◽  
Mobile Manipulator ◽  
Wheel Slip ◽  
Modeling And Control ◽  
Control Approach ◽  
And Control

This paper concerns the modeling and control of a mobile manipulator which consists of a robotic arm mounted upon a mobile platform. The equations of motion are derived using the Lagrange-d'Alembert formulation for the nonholonomic model of the mobile manipulator. The dynamic model which considers slip of the platform's tires is developed using the Newton-Euler method and incorporates Dugoff's tire friction model. Then, the tracking problem is investigated by using a well known nonlinear control method for the nonholonomic model. The adverse effect of the wheel slip on the tracking of commanded motion is discussed in the simulation. For the dynamic model, a variable structure control approach is employed to minimize the harmful effect of the wheel slip on the tracking performance. The simulation results demonstrate the effectiveness of the proposed control algorithm.

Part II Key Risks and Disputes Associated with International Mining Projects, 5 Political Risk and Resource Nationalism

2017 ◽  
Author(s):  
Burnett Henry G ◽  
Bret Louis-Alexis
Keyword(s):  
Political Risk ◽  
Legal Framework ◽  
Commercial Production ◽  
Foreign Investor ◽  
Political Event ◽  
Resource Nationalism ◽  
Investment Resource ◽  
Mining Projects ◽  
Host Government ◽  
And Control

This chapter first discusses the notions of political risk and resource nationalism. Political risk refers to the risk that some political event will materially affect the projected profitability or the legal framework of a given project or investment. Resource nationalism refers to the tendency of a host government to take action to increase its control of-and value derived from—the development of its national resources, often after a private foreign investor has placed the resource into commercial production. The chapter then covers expropriations and nationalizations of international mining projects; the principal types of measures employed by Host States to increase their participation in, revenues from, and control over mining projects; breach, repudiation, or forced renegotiation of international mining contracts by Host States; and managing political risk for international mining projects.

scholarly journals Total and Free Deoxypyridinoline after Acute Osteoclast Activity Inhibition

1999 ◽  
Vol 45 (9) ◽  
pp. 1510-1516 ◽  
Author(s):  
Alessandro Rubinacci ◽  
Raffaella Melzi ◽  
Maria Zampino ◽  
Armando Soldarini ◽  
Isabella Villa
Keyword(s):  
Type I Collagen ◽  
Degradation Process ◽  
Type I ◽  
Short Term ◽  
Oral Calcium ◽  
Osteoclast Activity ◽  
High Bone ◽  
Highly Correlated ◽  
Acute Changes ◽  
And Control

Abstract Background: Deoxypyridinoline (Dpd) is one of the two pyridinium cross-links that provide structural rigidity to type I collagen in bone. During osteoclastic resorption, Dpd is released into circulation and is excreted in the urine in free and peptide-bound forms. Free and total Dpd are highly correlated, but whether the free-to-total cross-link ratio is constant in both normal and high bone turnover states remains controversial. To compare free and total Dpd performance in a physiological condition, urinary free and total Dpd were measured after a short-term inhibition of osteoclast activity such as that induced by an oral calcium load. Methods: Total and free Dpd were measured by HPLC and by immunosorbent assay, respectively, in two groups of subjects, one (calcium-treated; n = 16) taking calcium and the other not (control; n = 9). Results: The urinary excretion of total Dpd at 2 and 4 h after oral calcium loading was decreased compared with controls. By contrast, changes in free Dpd were similar in the calcium-treated and control groups, reflecting only circadian rhythm. Conclusions: Total and free Dpd do not show comparable sensitivity in detecting short-term inhibition of osteoclast activity. The degradation process of peptide-bound to free Dpd could render free Dpd insensitive to acute changes of osteoclast activity.

Sign in / Sign up

Export Citation Format

Share Document