scholarly journals Analysis of a Fire in an Apartment of Timber Building Depending on the Ventilation Parameter

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Agnes Iringová ◽  
Dominika Vandličková

Abstract In modern buildings are also currently used the wooden-based construction systems. A wide range of uses the timber constructions in apartment buildings is a vision of the countries of the EU. The use of timber and the other recyclable materials in apartment buildings creates the precondition for the implementation, operation and disposal of environmental impacts of the EU 2020 Strategy. In the long term is important to transform the construction of buildings to a sustainable standard, which the application of wood in construction supports. Currently, the fire height of timber-based residential construction in most EU countries is limited to 5 storeys, provided that the timber structures are fire-protected. This paper deals with the influence of the ventilation parameter in the time and the intensity of the gas temperature during a fire in a model of an apartment building with a timber load-bearing structure. The load-bearing structure is made of CLT panels, with a mixed structural unit, i.e. with fire-resistant cladding of all load-bearing and fire-dividing structures. FDS (Fire Dynamics Simulator - PyroSim software) is used for dynamic simulations of fire in the model apartment.

2018 ◽  
Vol 247 ◽  
pp. 00059
Author(s):  
Kamil Kmiecik

The fire development in timber buildings may have a different intensity depending on the location in which the fire originated. The large-space timber buildings are characterized by a large area with a comparatively low height, which makes fire-gas evacuation and air circulation difficult. This paper presents an investigation on the influence of the fire source location on the load-bearing capacity of timber beam exposed to fire. The finite element software Fire Dynamics Simulator (FDS) was used for numerical fire modelling, specifying the time-varying spatial maps of the fire-plume-gas temperature on the basis of the equations taken from the fluid dynamics methodology with aerodynamic and thermodynamic variables. The obtained results from the FDS were used to determine the load-bearing capacity of timber beam using the SAFIR software. The results of numerical simulations showed that the fire source location has a significant influence on the load-bearing capacity of timber beam exposed to fire.


Author(s):  
О. Кravchuk ◽  
V. Symonenkov ◽  
I. Symonenkova ◽  
O. Hryhorev

Today, more than forty countries of the world are engaged in the development of military-purpose robots. A number of unique mobile robots with a wide range of capabilities are already being used by combat and intelligence units of the Armed forces of the developed world countries to conduct battlefield intelligence and support tactical groups. At present, the issue of using the latest information technology in the field of military robotics is thoroughly investigated, and the creation of highly effective information management systems in the land-mobile robotic complexes has acquired a new phase associated with the use of distributed information and sensory systems and consists in the transition from application of separate sensors and devices to the construction of modular information subsystems, which provide the availability of various data sources and complex methods of information processing. The purpose of the article is to investigate the ways to increase the autonomy of the land-mobile robotic complexes using in a non-deterministic conditions of modern combat. Relevance of researches is connected with the necessity of creation of highly effective information and control systems in the perspective robotic means for the needs of Land Forces of Ukraine. The development of the Armed Forces of Ukraine management system based on the criteria adopted by the EU and NATO member states is one of the main directions of increasing the effectiveness of the use of forces (forces), which involves achieving the principles and standards necessary for Ukraine to become a member of the EU and NATO. The inherent features of achieving these criteria will be the transition to a reduction of tasks of the combined-arms units and the large-scale use of high-precision weapons and land remote-controlled robotic devices. According to the views of the leading specialists in the field of robotics, the automation of information subsystems and components of the land-mobile robotic complexes can increase safety, reliability, error-tolerance and the effectiveness of the use of robotic means by standardizing the necessary actions with minimal human intervention, that is, a significant increase in the autonomy of the land-mobile robotic complexes for the needs of Land Forces of Ukraine.


Friction ◽  
2021 ◽  
Author(s):  
Luyao Gao ◽  
Xiaoduo Zhao ◽  
Shuanhong Ma ◽  
Zhengfeng Ma ◽  
Meirong Cai ◽  
...  

AbstractSilicone elastomers-based materials have been extensively involved in the field of biomedical devices, while their use is extremely restricted due to the poor surface lubricity and inherent hydrophobicity. This paper describes a novel strategy for generating a robust layered soft matter lubrication coating on the surface of the polydimethylsiloxane (PDMS) silicone elastomer, by entangling thick polyzwitterionic polyelectrolyte brush of poly (sulfobetaine methacrylate) (PSBMA) into the sub-surface of the initiator-embedded stiff hydrogel coating layer of P(AAm-co-AA-co-HEMA-Br)/Fe, to achieve a unified low friction and high load-bearing properties. Meanwhile, the stiff hydrogel layer with controllable thickness is covalently anchored on the surface of PDMS by adding iron powder to provide catalytic sites through surface catalytically initiated radical polymerization (SCIRP) method and provides high load-bearing capacity, while the topmost brush/hydrogel composite layer is highly effective for aqueous lubrication. Their synergy effects are capable of attaining low friction coefficient (COFs) under wide range of loaded condition in water environment with steel ball as sliding pair. Furthermore, the influence of mechanical modulus of the stiff hydrogel layer on the lubrication performance of layered coating is investigated, for which the COF is the lowest only when the modulus of the stiff hydrogel layer well matches the PDMS substrate. Surprisingly, the COF of the modified PDMS could remain low friction (COF < 0.05) stably after encountering 50,000 sliding cycles under 10 N load. Finally, the surface wear characterizations prove the robustness of the layered lubricating coating. This work provides a new route for engineering lubricious silicon elastomer with low friction, high load-bearing capacity, and considerable durability.


Author(s):  
Simon Wagner ◽  
Colin Cole ◽  
Maksym Spiryagin

AbstractRolling stock connection systems are key to running longer and heavier trains as they provide both the connections of vehicles and the damping, providing the longitudinal suspension of the train. This paper focuses on the evolution of both connection and stiffness damping systems. Focus is on freight rolling stock, but passenger draw gears are also examined. It was found that connection systems have evolved from the buff and chain system used in the pioneer railways of the 1800s to the modern auto-coupler connection systems that are in-service worldwide today. Refined versions of the buff and chain coupling are, however, still in use in the EU, UK, South America and India. A wide range of auto-coupler systems are currently utilised, but the AAR coupler (Janney coupler) remains the most popular. A further variation that persists is the SA3 coupler (improved Wilson coupler) which is an alternative auto-coupler design used mainly throughout the former Soviet Union. Restricting the review to auto-coupler systems allowed the paper to focus on draft gears which revealed polymer, polymer-friction, steel spring-friction, hydraulic draft gears and sliding sill cushioning systems. Along with the single compressive draft gear units balanced and floating plate configurations are also presented. Typical draft gear acceptance standards are presented along with modelling that was included to aid in presentation of the functional characteristics of draft gears.


2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
◽  

Abstract The European Observatory established the Health Systems and Policy Monitor (HSPM) network in 2008, bringing together an international group of high-profile institutions from Europe and beyond with high academic standing in health systems and policy analysis. An important step was taken in 2011, when the Bertelsmann Health Policy Monitor, a 20-country-project with already significant overlap with the current HSPM network, merged with the Observatory's network of national lead institutions. Today, the network includes 40 institutions from 31 countries, with members participating in a wide range of activities and collaborations, such as writing the Observatory's flagship health system reports (HiTs), keeping the health policy community up-to-date on health system developments via the HSPM web platform, and contributing their expertise to reports, studies and knowledge transfer exercises co-ordinated by the Observatory for a variety of audiences, including ministries of health and international organisations such as the World Health Organization and the European Commission. In addition, network members participate in an annual meeting, hosted in a different member country every year, coming together over two days to exchange knowledge and experiences about the various health system reforms happening in their countries. The aim of these meetings is to present, discuss and start comparative research collaborations of the members that can inform policymaking. As part of a collaboration with the journal Health Policy, researchers of the HSPM network have published more than 100 articles on cross-country comparisons of policies or on ongoing nation health reforms in a special section - the Health Reform Monitor - of the journal. This workshop aims to provide the audience with an overview of the network and its expanding range of activities. An introductory presentation will briefly introduce the origins of the network and discuss its current line of work. The second presentation will provide an overview of reform trends that are routinely collected during the annual meetings as part of the “reform roundup”. The third presentation will give an example of how the network has contributed to the European Commission's State of Health in the EU initiative, by performing a 'rapid response” that informed the companion report to the State of Health in the EU country health profiles 2019. The fourth presentation is a typical example of the kind of collaborative work that the network is undertaking, i.e. involving multiple countries on a topic of shared interest. The workshop will conclude with a debate with the audience about the conceptual and methodological challenges as well as opportunities and future directions of cross-country comparative research and the HSPM network in particular. Key messages The Health Systems and Policy Monitor Network provides detailed descriptions of health systems and provides up to date information on reforms and changes that are particularly policy relevant. The Health Systems and Policy Monitor Network increasingly engages in comparative health systems research and knowledge transfer activities.


2012 ◽  
Vol 190 ◽  
pp. 97-100 ◽  
Author(s):  
V.V. Glushkov ◽  
A.V. Kuznetsov ◽  
I. Sannikov ◽  
A.V. Bogach ◽  
S.V. Demishev ◽  
...  

We report the magnetic properties of EuxCa1-xB6 single crystals (0.756x1) studied in the wide range of temperatures (1.8-300 K) and magnetic fields (up to 50 kOe). It was found that low field magnetic susceptibility χ (T) follows the Curie-Weiss law χ~(T-Θp)-1 at high temperatures for all the concentrations studied. The effective magnetic moment of the Eu2+ ion estimated from the data diminishes from the free ion value μeff7.93μB (μB - Bohr magneton) for x=1 to μeff7.3μB for x=0.756. A universal behavior of magnetic susceptibility χ~(T-Θ)-α (α=1.5) is detected close to the Curie temperature TC in the paramagnetic state at both metallic (x>xC~0.8) and dielectric (xC.


2013 ◽  
Vol 34 (2) ◽  
pp. 331-353 ◽  
Author(s):  
Mónica García Quesada

AbstractFailures of compliance with European Union (EU) directives have revealed the EU as a political system capable of enacting laws in a wide range of different policy areas, but facing difficulties to ensure their actual implementation. Although the EU relies on national enforcement agencies to ensure compliance with the EU legislation, there is scarce analysis of the differential deterrent effect of national enforcement in EU law compliance. This article examines the enforcement of an EU water directive, the Urban Waste Water Treatment Directive, in Spain and the UK. It focuses on the existing national sanctions for disciplining actors in charge of complying with EU requirements, and on the actual use of punitive sanctions. The analysis shows that a more comprehensive and active disciplinary regime at the national level contributes to explain a higher degree of compliance with EU law. The article calls for a detailed examination of the national administrative and criminal sanction system for a more comprehensive understanding of the incentives and disincentives to comply with EU law at the national state level.


2021 ◽  
Vol 883 ◽  
pp. 3-10
Author(s):  
Fabian Kappe ◽  
Mathias Bobbert ◽  
Gerson Meschut

The increasing use of multi-material constructions lead to a continuous increase in the use of mechanical joining techniques due to the wide range of joining possibilities as well as the high load-bearing capacities of the joints. Nevertheless, the currently rigid tool systems are not able to react to changing boundary conditions, like changing the material-geometry-combination. Therefore research work is crucial with regard to versatile joining systems. In this paper, a new approach for a versatile self-piercing riveting process considering the joining system as well as the auxiliary joining part is presented.


Author(s):  
I. I. Vedyakov ◽  
D. V. Konin ◽  
A. A. Egorova ◽  
I. V. Rtishcheva

The present work provides an overview and analysis of scientific, technical, regulatory, and methodical Russian and foreign literature regarding using glass as a material for load-bearing structures of buildings. In the absence of design standards, an experimental study of usually one or two samples is necessary each time glass structure is used; however, this is insufficient to determine the distinct pattern of material performance. Since jointing the glass structures has been rarely studied, the number of tests is minimal, thus preventing establishing the unambiguous material operation and its calculated physical and mechanical characteristics. The article considers and evaluates the test results of glass structures obtained by various methods. The particular values of ultimate stresses and deformation modulus lie in a wide range. The technology, manufacturing process, and starting materials have a significant influence on the characteristics of glass, including multilayer glass. This article stresses the need for developing regulatory technical and methodical documents, the design and testing standards for glass structures and their jointing. It is necessary to classify load-bearing glass structures by various criteria.


Author(s):  
Christina Greenaway ◽  
Iuliia Makarenko ◽  
Claire Abou Chakra ◽  
Balqis Alabdulkarim ◽  
Robin Christensen ◽  
...  

Chronic hepatitis C (HCV) is a public health priority in the European Union/European Economic Area (EU/EEA) and is a leading cause of chronic liver disease and liver cancer. Migrants account for a disproportionate number of HCV cases in the EU/EEA (mean 14% of cases and >50% of cases in some countries). We conducted two systematic reviews (SR) to estimate the effectiveness and cost-effectiveness of HCV screening for migrants living in the EU/EEA. We found that screening tests for HCV are highly sensitive and specific. Clinical trials report direct acting antiviral (DAA) therapies are well-tolerated in a wide range of populations and cure almost all cases (>95%) and lead to an 85% lower risk of developing hepatocellular carcinoma and an 80% lower risk of all-cause mortality. At 2015 costs, DAA based regimens were only moderately cost-effective and as a result less than 30% of people with HCV had been screened and less 5% of all HCV cases had been treated in the EU/EEA in 2015. Migrants face additional barriers in linkage to care and treatment due to several patient, practitioner, and health system barriers. Although decreasing HCV costs have made treatment more accessible in the EU/EEA, HCV elimination will only be possible in the region if health systems include and treat migrants for HCV.


Sign in / Sign up

Export Citation Format

Share Document