scholarly journals Influence of Reaction Medium on CO2 Photocatalytic Reduction Yields Over Zns-MMT / Vliv Reakčního Prostření Na Výtěžky Fotokatalytické Redukce CO2 V Přítomnosti Zns-MMT

2012 ◽  
Vol 58 (1) ◽  
pp. 34-42 ◽  
Author(s):  
Martin Reli ◽  
Marcel Šihor ◽  
Kamila Kočí ◽  
Petr Praus ◽  
Ondřej Kozák ◽  
...  
Keyword(s):  
Sodium Hydroxide ◽  
Gas Phase ◽  
Room Temperature ◽  
Uv Light ◽  
Ambient Pressure ◽  
Reaction Medium ◽  
Ammonium Hydroxide ◽  
Photocatalytic Reduction ◽  
Reaction Media ◽  
Better Than

Abstract The reduction of CO2 by photocatalysts is one of the most promising methods since CO2 can be reduced to useful compounds by irradiating it with UV light at room temperature and ambient pressure. The aim of this work was to assess the effect of a reaction media on CO2 photocatalytic reduction yields over ZnS nanoparticles deposited on montmorillonite (ZnS-MMT). Four different reaction media, such as NaOH, NaOH+Na2SO3 (1:1), NH4OH, NH4OH+Na2SO3 (1:1), were tested. The pure sodium hydroxide was better than ammonium hydroxide for the yields of the both gas phase (CH4 and CO) and liquid phase (CH3OH). The addition of Na2SO3 improved methanol yields due to the oxidation prevention of incipient methanol to carbon dioxide. The gas phase yields were decreased by the Na2SO3 addition. The best tested reaction medium for the photocatalytic reduction of CO2 was the solution of sodium hydroxide.

Chickpea Leaf Exudates: A Highly Efficient Natural Brønsted Acidic Medium for the Synthesis of Pyran-annulated Heterocycles

2021 ◽  
Vol 18 ◽  
Author(s):  
Snehali R. Mali ◽  
Sachinkumar K. Shinde ◽  
Bhagyashree M. Patil ◽  
Rupesh C. Patil ◽  
Suresh S. Patil
Keyword(s):  
Reaction Time ◽  
Acidic Medium ◽  
Room Temperature ◽  
Reaction Medium ◽  
One Pot ◽  
Short Reaction Time ◽  
Highly Efficient ◽  
Acid Type ◽  
Cyclocondensation Reaction ◽  
Reaction Media

: We reported Chickpea leaf exudates (CLE) as a Brønsted acid type naturally available biodegradable, ecofriendly and reusable reaction medium for highly efficient and facile one-pot synthesis of pyran annulated heterocyclic systems like 7-aryl-benzopyrano[4,3-b]benzopyran-6,8-diones, tetrahydrobenzo[b]pyran and dihydropyrano[c]chromenes scaffolds. The analogous products were obtained via tandem Knoevengel-Michael addition and cyclocondensation reaction in ethanol at room temperature with 90-96 % yields in a short reaction time. Moreover, the reaction media containing Bronsted acids can be easily recovered and reused upto five times with a slight decrease in product yields.

Naturally Occurring Organic Acid-catalyzed Facile Diastereoselective Synthesis of Biologically Active (E)-3-(arylimino)indolin-2-one Derivatives in Water at Room Temperature

2019 ◽  
Vol 23 (16) ◽  
pp. 1778-1788 ◽  
Author(s):  
Gurpreet Kaur ◽  
Arvind Singh ◽  
Kiran Bala ◽  
Mamta Devi ◽  
Anjana Kumari ◽  
...  
Keyword(s):  
Room Temperature ◽  
Biologically Active ◽  
Environmentally Benign ◽  
Diastereoselective Synthesis ◽  
Substituted Anilines ◽  
Reaction Conditions ◽  
Naturally Occurring ◽  
Acid Catalyzed ◽  
Reaction Media ◽  
Column Chromatographic

A simple, straightforward and efficient method has been developed for the synthesis of (E)-3-(arylimino)indolin-2-one derivatives and (E)-2-((4-methoxyphenyl)imino)- acenaphthylen-1(2H)-one. The synthesis of these biologically-significant scaffolds was achieved from the reactions of various substituted anilines and isatins or acenaphthaquinone, respectively, using commercially available, environmentally benign and naturally occurring organic acids such as mandelic acid or itaconic acid as catalyst in aqueous medium at room temperature. Mild reaction conditions, energy efficiency, good to excellent yields, environmentally benign conditions, easy isolation of products, no need of column chromatographic separation and the reusability of reaction media are some of the significant features of the present protocol.

scholarly journals Preparation of Li3PS4–Li3PO4 Solid Electrolytes by Liquid-Phase Shaking for All-Solid-State Batteries

2021 ◽  
Vol 2 (1) ◽  
pp. 39-48
Author(s):  
Nguyen H. H. Phuc ◽  
Takaki Maeda ◽  
Tokoharu Yamamoto ◽  
Hiroyuki Muto ◽  
Atsunori Matsuda
Keyword(s):  
Solid Solution ◽  
Solid State ◽  
Liquid Phase ◽  
Room Temperature ◽  
Reaction Medium ◽  
Magic Angle Spinning ◽  
Resonance Spectroscopy ◽  
Synthesis Methods ◽  
Magic Angle ◽  
Angle Spinning

A solid solution of a 100Li3PS4·xLi3PO4 solid electrolyte was easily prepared by liquid-phase synthesis. Instead of the conventional solid-state synthesis methods, ethyl propionate was used as the reaction medium. The initial stage of the reaction among Li2S, P2S5 and Li3PO4 was proved by ultraviolet-visible spectroscopy. The powder X-ray diffraction (XRD) results showed that the solid solution was formed up to x = 6. At x = 20, XRD peaks of Li3PO4 were detected in the prepared sample after heat treatment at 170 °C. However, the samples obtained at room temperature showed no evidence of Li3PO4 remaining for x = 20. Solid phosphorus-31 magic angle spinning nuclear magnetic resonance spectroscopy results proved the formation of a POS33− unit in the sample with x = 6. Improvements of ionic conductivity at room temperature and activation energy were obtained with the formation of the solid solution. The sample with x = 6 exhibited a better stability against Li metal than that with x = 0. The all-solid-state half-cell employing the sample with x = 6 at the positive electrode exhibited a better charge–discharge capacity than that employing the sample with x = 0.

scholarly journals Novel technology for storage and distribution of live vaccines and other biological medicines at ambient temperature

2020 ◽  
Vol 6 (10) ◽  
pp. eaau4819 ◽  
Author(s):  
Irnela Bajrovic ◽  
Stephen C. Schafer ◽  
Dwight K. Romanovicz ◽  
Maria A. Croyle
Keyword(s):  
Room Temperature ◽  
Recombinant Adenovirus ◽  
Amorphous Solid ◽  
Live Virus ◽  
Live Vaccines ◽  
Novel Technology ◽  
Production Distribution ◽  
Global Access ◽  
Reducing Costs ◽  
Better Than

A novel, thin-film platform that preserves live viruses, bacteria, antibodies, and enzymes without refrigeration for extended periods of time is described. Studies with recombinant adenovirus in an optimized formulation that supports recovery of live virus through 16 freeze-thaw cycles revealed that production of an amorphous solid with a glass transition above room temperature and nitrogen-hydrogen bonding between virus and film components are critical determinants of stability. Administration of live influenza virus in the optimized film by the sublingual and buccal routes induced antibody-mediated immune responses as good as or better than those achieved by intramuscular injection. This work introduces the possibility of improving global access to a variety of medicines by offering a technology capable of reducing costs of production, distribution, and supply chain maintenance.

scholarly journals Zirconium-Doped Chromium IV Oxide Nanocomposites: Synthesis, Characterization, and Photocatalysis towards the Degradation of Organic Dyes

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 117
Author(s):  
Zahir Muhammad ◽  
Farman Ali ◽  
Muhammad Sajjad ◽  
Nisar Ali ◽  
Muhammad Bilal ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Solid State ◽  
Room Temperature ◽  
Organic Dyes ◽  
Uv Light ◽  
Heterogeneous Photocatalysis ◽  
Ft Ir ◽  
Complete Mineralization

Degradation of organic dyes and their byproducts by heterogeneous photocatalysts is an essential process, as these dyes can be potentially discharged in wastewater and threaten aquatic and xerophyte life. Therefore, their complete mineralization into nontoxic components (water and salt) is necessary through the process of heterogeneous photocatalysis. In this study, Zr/CrO2 (Zirconium-doped chromium IV oxide) nanocomposite-based photocatalysts with different compositions (1, 3, 5, 7 & 9 wt.%) were prepared by an environmentally friendly, solid-state reaction at room temperature. The as-prepared samples were calcined under air at 450 °C in a furnace for a specific period of time. The synthesis of Zr/CrO2 photocatalysts was confirmed by various techniques, including XRD, SEM, EDX, FT-IR, UV-Vis, and BET. The photocatalytic properties of all samples were tested towards the degradation of methylene blue and methyl orange organic dyes under UV light. The results revealed a concentration-dependent photocatalytic activity of photocatalysts, which increased the amount of dopant (up to 5 wt.%). However, the degradation efficiency of the catalysts decreased upon further increasing the amount of dopant due to the recombination of holes and photoexcited electrons.

scholarly journals Preparation and the Microwave and Infrared Spectra of Vinyl Ketene

1979 ◽  
Vol 34 (11) ◽  
pp. 1269-1274 ◽  
Author(s):  
Erik Bjarnov
Keyword(s):  
Dipole Moment ◽  
Gas Phase ◽  
Infrared Spectra ◽  
Room Temperature ◽  
Normal Modes ◽  
Spectroscopic Constants ◽  
Electrical Dipole ◽  
Electrical Dipole Moment ◽  
Vacuum Pyrolysis ◽  
Modes Of Vibration

Vinyl ketene (1,3-butadiene-1-one) has been synthesized by vacuum pyrolysis of 3-butenoic 2-butenoic anhydride. The microwave and infrared spectra of vinyl ketene in the gas phase at room temperature have been studied. The trans-rotamer has been identified, and the spectroscopic constants were found to be Ã= 39571(48) MHz, B̃ = 2392.9252(28) MHz, C̃ = 2256.0089(28) MHz, ⊿j = 0.414(31) kHz, and ⊿JK = - 34.694(92) kHz. The electrical dipole moment was found to be 0.987(23) D with μa = 0.865(14) D and μb = 0.475(41) D. A tentative assignment has been made for 17 of the 21 normal modes of vibration

scholarly journals Kinetics and Mechanism of the Change of the 4-Nitrobenzylthio-System into 4,4′-Diformylazoxybenzene in Alkaline Dioxane-Water Media

1985 ◽  
Vol 40 (11) ◽  
pp. 1128-1132
Author(s):  
Y. Riad ◽  
Adel N. Asaad ◽  
G.-A. S. Gohar ◽  
A. A. Abdallah
Keyword(s):  
Acetic Acid ◽  
Sodium Hydroxide ◽  
Rate Constants ◽  
Main Product ◽  
Reaction Medium ◽  
Aqueous Dioxane ◽  
Proton Abstraction ◽  
First Order ◽  
Water Media ◽  
Different Temperatures

Sodium hydroxide reacts with α -(4-nitrobenzylthio)-acetic acid in aqueous-dioxane media to give 4,4'-diformylazoxybenzene as the main product besides 4,4'-dicarboxyazoxybenzene and a nitrone acid. This reaction was kinetically studied in presence of excess of alkali in different dioxane-water media at different temperatures. It started by a fast reversible a-proton abstraction step followed by two consecutive irreversible first-order steps forming two intermediates (α -hydroxy, 4-nitrosobenzylthio)-acetic acid and 4-nitrosobenzaldehyde. The latter underwent a Cannizzaro's reaction, the products of which changed in the reaction medium into 4,4'-diformylazoxybenzene and 4,4'-dicarboxyazoxybenzene. The rate constants and the thermodynamic parameters of the two consecutive steps were calculated and discussed. A mechanism was put forward for the formation of the nitrone acid.Other six 4-nitrobenzyl, aryl sulphides were qualitatively studied and they gave mainly 4,4'-diformylazoxybenzene beside 4,4'-dicarboxyazoxybenzene or its corresponding azo acid.

Carbon Capture Performance of Amino-Modified MIL-101 at Room Temperature

2013 ◽  
Vol 395-396 ◽  
pp. 637-640
Author(s):  
Yi Yang ◽  
Zheng Ping Wang ◽  
Ling Meng ◽  
Lian Jun Wang
Keyword(s):  
Carbon Dioxide ◽  
Specific Surface ◽  
Pore Structure ◽  
Carbon Capture ◽  
Room Temperature ◽  
Ambient Pressure ◽  
Metal Organic Framework ◽  
Adsorption Properties ◽  
Carbon Dioxide Adsorption ◽  
Before And After

MIL-101, a metal-organic framework material, was synthesized by the high-temperature hydrothermal method. Triethylenetetramine (TETA) modification enabled the effective grafting of an amino group onto the surface of the materials and their pore structure. The crystal structure, micromorphology, specific surface area, and pore structure of the samples before and after modification were analyzed with an X-ray diffractometer, scanning electron microscope, specific surface and aperture tester, and infrared spectrometer. The carbon dioxide adsorption properties of the samples were determined by a thermal analyzer before and after TETA modification. Results show that moderate amino modification can effectively improve the microporous structure of MIL-101 and its carbon dioxide adsorption properties. After modification, the capacity of MIL-101 to adsorb carbon dioxide decreased only by 0.61 wt%, and a high adsorption capacity of 9.45 wt% was maintained after six cycles of adsorption testing at room temperature and ambient pressure.

Sign in / Sign up

Export Citation Format

Share Document