scholarly journals The Life Cycles of Mayflies of the Eastern Ukraine. Subfamily Baetinae (Ephemeroptera, Baetidae)

2013 ◽  
Vol 47 (1) ◽  
pp. 35-44 ◽  
Author(s):  
A. V. Martynov

Abstract The life cycle types of mayflies of the subfamily Baetinae in Eastern Ukraine are determined. The scheme for identification of larval age structure is given. The age structure changes of Baetis braaschi, B. nexus and Alainites muticus larvae during the year are described in detail. The flight periods of imagoes throughout the studied region are delimited for almost all species of the subfamily. B. braaschi is shown to have the bivoltine life cycle, with its populations overwintering as the larval stage (MBws) independently on temperature conditions in the water body. The peculiarities of oviposition are described for this species. The following aspects of life cycles were revealed: nymphs, subimagoes and imagoes of different generations of B. braaschi differ considerably in size; the voltinity of B. vernus in the region can vary (Us and/or MBss), mainly due to temperature conditions of the water bodies, where its development takes place; geographically isolated populations of A. muticus in the Eastern Ukraine reproduce only by thelytoky

2021 ◽  
Vol 9 ◽  
Author(s):  
Claudia Patricia Camacho-Rozo ◽  
Nicolás Urbina-Cardona

The study of tadpole assemblages allows inferring habitat availability and using their occupation as a means of proxy for the effective reproduction of the species, contributing to complementary information for the study of their adult forms. Environmental variables, represented by abiotic variables, vegetation structure, matrix management, and landscape elements, affect species having reproductive modes associated with oviposition and development in bodies of water. In the Orinoco region, most amphibians have complex life cycles and deposit their eggs in highly dynamic lentic bodies of water. Therefore, it is important to know how larval assemblages change over short periods of water accumulation and their relationship with environmental variables. Fieldwork was conducted during 9 weeks of larval sampling, from the beginning of the rainy season. We evaluate changes in anuran assemblages associated with water accumulation in five temporary water bodies of anthropogenic (road or pasture) and natural (savanna or gallery forest) origin. Twenty environmental variables were evaluated and measured in the center of each water body. Of these, nine landscape variables were measured only once during the study. The other eleven variables, representing management practices, physicochemical and structural characteristics of the water bodies, were measured weekly during the 3 months of sampling. We explored differences in the structure and diversity of larval-stage anuran assemblages using statistical tests suitable for small sample sizes (i.e., permutational multivariate analysis of variance PERMANOVA and the distance-based linear modeling DistLM). Of the 14 species found, two species had remarkedly high abundances from which Rhinella humboldti (19% of the total tadpole abundance) was a generalist inhabiting the natural and anthropogenic water bodies, while Leptodactylus insularum (18% of the total tadpole abundance) was a specialist at a natural pond in the savanna. The natural water bodies contained the highest number of species (between 10 and 12) and a total abundance of larvae (between 847 and 485 individuals). In contrast, the anthropogenic water body tracks generated by tractors were only occupied by two species with 50 individuals in total, while the water body generated by the trampling of cattle in pastures had three species with 474 individuals. These three species that inhabited the anthropogenic puddles were also found in the natural ponds and none of the eight species of hylids inhabited the puddles. In each field trip, all the tadpoles were collected from the sampled bodies of water. However, a week later, we found that each of the water bodies had been recolonized by four species (Leptodactylus fuscus, Leptodactylus fragilis, Elachistocleis ovalis, and R. humbolti). The variables with the highest explanatory power on the variation of anuran assemblage structure throughout all the water bodies were height of plants, number of cattle, distance to the nearest native forest edge, distance to an anthropic lentic body of water, distance to a natural lentic body of water, and pH. The bodies of water immersed in the natural cover were more diverse and had a greater degree of spatial and temporal species turnover. Our study calls for the importance of understanding the turnover of larval stage anurans over short periods, associated with water accumulation, in highly dynamic systems such as natural ponds and anthropogenic puddles. The importance of species traits and local processes is also highlighted, from environmental variables to human management activities, in the conservation of amphibian assemblages.


Author(s):  
R. Schwarz ◽  
J.A.A. Perez

Age structure and hatchling dates of the squid Illex argentinus collected by bottom-trawl fishery in southern Brazilian waters were assessed by the analysis of statolith growth increments. Catches occurred between 2001 and 2002, from 23° to 32°S at depths of 100–700 m. Squid from juvenile to post-spawning stages were collected year round, with age estimated from 98 to 320 days and mantle lengths ranging from 112 to 376 mm. Duration of life cycle events based on statolith growth zones revealed that squids can spend about 14% of their lifespan as paralarva (~30 days), 70% as juvenile (~130 days), leaving maturity and spawning condition to the terminal 10–20% (~30–60 days). The results suggest that, unlike estimates available for Patagonian populations, a general 0.5 year lifespan is predicted for I. argentinus off Brazil. The wide range of size-at-ages implied that catches of shortfin squid off southern Brazil probably include squid hatched throughout the year. Mature and spawning squid caught in summer months hatched in winter and spring, while winter catches revealed mature-spawning individuals hatched both in summer/autumn (~6 months of age) and winter/spring periods (~10–11 months of age). It has been argued that such groups may combine both squid resident of Brazilian outer shelf and slope (22°–34°S) with a six months' lifespan and migrating squid originated from the northern Patagonian shelf (~42°S) with 10–11 months' lifespan.


2021 ◽  
Vol 14 (3) ◽  
pp. 301-315
Author(s):  
A. E. Zhokhov ◽  
M. N. Pugacheva ◽  
L. G. Poddubnaya

Abstract Data on trematode life cycles, fish host distribution, transmission, and fish and snail infection are reported in this review. European freshwater trematodes of the genus Sanguinicola (Aporocotylidae) remain an insufficiently studied group of trematodes. Five species of Aporocotylidae (Sanguinicola armata, S. inermis, S. intermedia, S. volgensis, and S. rutili) in freshwater fish of Europe are described. In addition, they have been found in the water bodies of Central Asia and West Siberia (Ob-Irtysh River basin). The life cycle allowing us to assign the cercariae and adults to a certain species is known only for S. armata, S. inermis, and S. rutili. Trematodes of the genus Sanguinicola are found in 26 fish species assigned to 7 families and 4 orders and 24 gastropod species assigned to 7 families. With few exceptions, the sanguinicolid infection of fish and snails is rather low in the natural water bodies.


2020 ◽  
Vol 1 (10) ◽  
pp. 26-35
Author(s):  
E. A. SHUBINA ◽  
◽  
Yu. A. KOMAROVSKY ◽  
A. V. MERKUSHEV ◽  
◽  
...  

The article is devoted to the study of the largest mergers and acquisitions (M&A, “Mergers & Acquisitions”) in Russia for 2017–2019. (the acquired block of shares is not less than 99%). The concept of life cycles of organizations and theoretical aspects of mergers and acquisitions are described. The stages of the life cycle of the merged and reorganized companies, the goals of mergers and acquisitions, depending on the stages of the life cycle are analyzed.


1989 ◽  
Vol 21 (12) ◽  
pp. 1821-1824
Author(s):  
M. Suzuki ◽  
K. Chihara ◽  
M. Okada ◽  
H. Kawashima ◽  
S. Hoshino

A computer program based on expert system software was developed and proposed as a prototype model for water management to control eutrophication problems in receiving water bodies (Suzuki etal., 1988). The system has several expert functions: 1. data input and estimation of pollution load generated and discharged in the river watershed; 2. estimation of pollution load run-off entering rivers; 3. estimation of water quality of receiving water bodies, such as lakes; and 4. assisting man-machine dialog operation. The program can be used with MS-DOS BASIC and assembler in a 16 bit personal computer. Five spread sheets are utilized in calculation and summation of the pollutant load, using multi-windows. Partial differential equations for an ecological model for simulation of self-purification in shallow rivers and simulation of seasonal variations of water quality in a lake were converted to computer programs and included in the expert system. The simulated results of water quality are shown on the monitor graphically. In this study, the expert system thus developed was used to estimate the present state of one typical polluted river basin. The river was the Katsura, which flows into Lake Sagami, a lake dammed for water supply. Data which had been actually measured were compared with the simulated water quality data, and good agreement was found. This type of expert system is expected to be useful for water management of a closed water body.


Author(s):  
Valeriy S. Gerasimov ◽  
Vladimir I. Ignatov ◽  
Konstantin G. Sovin

According to forecasts for 2022, the number of self-propelled agricultural machinery that will fail will be about 100 thousand units. This will have a significant impact on the overall productivity in the field of agricultural production and will require additional financial costs for effective resource-saving environmental-oriented utilization of agricultural machinery with the maximum recovery of secondary resources in the processing of its components. (Research purpose) The research purpose is considering the main life cycles of machinery, including agricultural, and determining the possibility of obtaining secondary resources in the recycling of components of machinery and equipment. (Materials and methods) The authors found that the establishment of an industry-wide recycling system would allow the reuse of usable and recovered parts obtained from decommissioned equipment, as well as receive additional funding from the sale of secondary resources. The authors have found that for the functioning of the whole system, it is necessary to work with a large amount of data related to the ongoing recycling processes, as well as constantly monitor changes in the state and properties of materials. They also found that the maximum use of digital technology is the only way to combine all these requirements and make the system work. (Results and discussion) The article reviews the key points of the use of life cycle method for equipment, including agricultural, reviews the state of machine and tractor park of agro-industrial complex, shows the possibility of using resource-saving ecologically oriented branch system of recycling of agricultural machinery, as well as the movement of waste and material flows in the processing components of utilized machines. (Conclusion) The article presents recommendations on the possibility of efficient disposal of equipment, including agricultural, with the maximum recovery of secondary resources from recycled waste.


Author(s):  
Judith Fuchs

This chapter describes the taxonomy of Phoronida, a small group of exclusively marine invertebrates found in most of the world's oceans from the intertidal zone to about 400 metres depth. Phoronids are meroplanktonic with a planktonic larval stage usually less than 2 mm in length and a benthic adult whose length ranges from a few cm up to 50 cm. The chapter covers their life cycle, ecology, and general morphology. It includes a section that indicates the systematic placement of the taxon described within the tree of life, and lists the key marine representative illustrated in the chapter (usually to genus or family level). This section also provides information on the taxonomic authorities responsible for the classification adopted, recent changes which might have occurred, and lists relevant taxonomic sources.


2020 ◽  
Vol 40 (6) ◽  
pp. 825-832 ◽  
Author(s):  
Miku Yabuta ◽  
Jens T Høeg ◽  
Shigeyuki Yamato ◽  
Yoichi Yusa

Abstract Although parasitic castration is widespread among rhizocephalan barnacles, Boschmaella japonica Deichmann & Høeg, 1990 does not completely sterilise the host barnacle Chthamalus challengeri Hoek, 1883. As little information is available on the relationships with the host in “barnacle-infesting parasitic barnacles” (family Chthamalophilidae), we studied the life cycles of both B. japonica and C. challengeri and the effects of the parasite on the host reproduction. Specimens of C. challengeri were collected from an upper intertidal shore at Shirahama, Wakayama, western Japan from April 2017 to September 2018 at 1–3 mo intervals. We recorded the body size, number of eggs, egg volume, and the presence of the parasite for each host. Moreover, settlement and growth of C. challengeri were followed in two fixed quadrats. Chthamalus challengeri brooded from February to June. The prevalence of B. japonica was high (often exceeded 10%) from April to July, and was rarely observed from September to next spring. The life cycle of the parasite matched well with that of the host. The parasite reduced the host’s brooding rate and brood size, to the extent that no hosts brooded in 2018.


Author(s):  
Tuan Anh Tran ◽  
Andrei Lobov ◽  
Tord Hansen Kaasa ◽  
Morten Bjelland ◽  
Ole Terje Midling

AbstractIn this paper, a CAD integrated method is proposed for automatic recognition of potential weld locations in large assembly structures predominantly comprised of weld joints. The intention is to reduce the total man-hours spent on manually locating, assigning, and maintaining weld-related information throughout the product life cycle. The method utilizes spatial analysis of extracted stereolithographic data in combination with available CAD functions to determine whether the accessibility surrounding a given intersection edge is sufficient for welding. To demonstrate the method, a system is developed in Siemens NX using their NXOpen Python API. The paper presents the application of the method to real-life use cases in varying complexity in cooperation with industrial partners. The system is able to correctly recognize almost all weld lines for the parts considered within a few minutes. Some exceptions are known for particular intersection lines located deep within notched joints and geometries weldable through sequential assembly, which are left as a subject to further works.


2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.


Sign in / Sign up

Export Citation Format

Share Document