MERGERS AND ACQUISITIONS AND THEIR CORRELATION WITH THE LIFE CYCLES OF MEMBER COMPANIES ON THE EXAMPLE OF THE RUSSIAN MARKET 2017–2019

2020 ◽  
Vol 1 (10) ◽  
pp. 26-35
Author(s):  
E. A. SHUBINA ◽  
◽  
Yu. A. KOMAROVSKY ◽  
A. V. MERKUSHEV ◽  
◽  
...  
Keyword(s):  
Life Cycle ◽  
Mergers And Acquisitions ◽  
Life Cycles ◽  
Russian Market

The article is devoted to the study of the largest mergers and acquisitions (M&A, “Mergers & Acquisitions”) in Russia for 2017–2019. (the acquired block of shares is not less than 99%). The concept of life cycles of organizations and theoretical aspects of mergers and acquisitions are described. The stages of the life cycle of the merged and reorganized companies, the goals of mergers and acquisitions, depending on the stages of the life cycle are analyzed.

Life cycle of self-propelled machinery with waste generation at its disposal

2020 ◽  
pp. 28-35
Author(s):  
Valeriy S. Gerasimov ◽  
Vladimir I. Ignatov ◽  
Konstantin G. Sovin
Keyword(s):  
Life Cycle ◽  
Life Cycles ◽  
The State ◽  
Research Purpose ◽  
Industrial Complex ◽  
Agricultural Machinery ◽  
Resource Saving ◽  
Secondary Resources ◽  
Branch System ◽  
Additional Funding

According to forecasts for 2022, the number of self-propelled agricultural machinery that will fail will be about 100 thousand units. This will have a significant impact on the overall productivity in the field of agricultural production and will require additional financial costs for effective resource-saving environmental-oriented utilization of agricultural machinery with the maximum recovery of secondary resources in the processing of its components. (Research purpose) The research purpose is considering the main life cycles of machinery, including agricultural, and determining the possibility of obtaining secondary resources in the recycling of components of machinery and equipment. (Materials and methods) The authors found that the establishment of an industry-wide recycling system would allow the reuse of usable and recovered parts obtained from decommissioned equipment, as well as receive additional funding from the sale of secondary resources. The authors have found that for the functioning of the whole system, it is necessary to work with a large amount of data related to the ongoing recycling processes, as well as constantly monitor changes in the state and properties of materials. They also found that the maximum use of digital technology is the only way to combine all these requirements and make the system work. (Results and discussion) The article reviews the key points of the use of life cycle method for equipment, including agricultural, reviews the state of machine and tractor park of agro-industrial complex, shows the possibility of using resource-saving ecologically oriented branch system of recycling of agricultural machinery, as well as the movement of waste and material flows in the processing components of utilized machines. (Conclusion) The article presents recommendations on the possibility of efficient disposal of equipment, including agricultural, with the maximum recovery of secondary resources from recycled waste.

Life cycles of the rhizocephalan Boschmaella japonica Deichmann & Høeg, 1990 (Cirripedia: Chthamalophilidae) and its host barnacle Chthamalus challengeri Hoek, 1883 (Cirripedia: Chthamalidae)

2020 ◽  
Vol 40 (6) ◽  
pp. 825-832 ◽  
Author(s):  
Miku Yabuta ◽  
Jens T Høeg ◽  
Shigeyuki Yamato ◽  
Yoichi Yusa
Keyword(s):  
Life Cycle ◽  
Brood Size ◽  
Life Cycles ◽  
The Body ◽  
Egg Volume ◽  
Size Number ◽  
Rhizocephalan Barnacles ◽  
Western Japan ◽  
Upper Intertidal ◽  
Chthamalus Challengeri

Abstract Although parasitic castration is widespread among rhizocephalan barnacles, Boschmaella japonica Deichmann & Høeg, 1990 does not completely sterilise the host barnacle Chthamalus challengeri Hoek, 1883. As little information is available on the relationships with the host in “barnacle-infesting parasitic barnacles” (family Chthamalophilidae), we studied the life cycles of both B. japonica and C. challengeri and the effects of the parasite on the host reproduction. Specimens of C. challengeri were collected from an upper intertidal shore at Shirahama, Wakayama, western Japan from April 2017 to September 2018 at 1–3 mo intervals. We recorded the body size, number of eggs, egg volume, and the presence of the parasite for each host. Moreover, settlement and growth of C. challengeri were followed in two fixed quadrats. Chthamalus challengeri brooded from February to June. The prevalence of B. japonica was high (often exceeded 10%) from April to July, and was rarely observed from September to next spring. The life cycle of the parasite matched well with that of the host. The parasite reduced the host’s brooding rate and brood size, to the extent that no hosts brooded in 2018.

scholarly journals Advances of 2nd Life Applications for Lithium Ion Batteries from Electric Vehicles Based on Energy Demand

2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich
Keyword(s):  
Life Cycle ◽  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Energy Demand ◽  
Lithium Ion ◽  
Life Cycles ◽  
Future Research ◽  
Research Areas ◽  
Study Results ◽  
The Impact

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals The life-cycle of the avian haemosporidian parasite Haemoproteus majoris, with emphasis on the exoerythrocytic and sporogonic development

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Mikas Ilgūnas ◽  
Carolina Romeiro Fernandes Chagas ◽  
Dovilė Bukauskaitė ◽  
Rasa Bernotienė ◽  
Tatjana Iezhova ◽  
...  
Keyword(s):  
Phylogenetic Analysis ◽  
Life Cycle ◽  
Dna Sequences ◽  
Parus Major ◽  
Life Cycles ◽  
Internal Organs ◽  
Haemosporidian Parasite ◽  
Biting Midges ◽  
Vector Identity ◽  
Bayesian Phylogeny

Abstract Background Haemoproteus parasites (Haemosporida, Haemoproteidae) are cosmopolitan in birds and recent molecular studies indicate enormous genetic diversity of these pathogens, which cause diseases in non-adapted avian hosts. However, life-cycles remain unknown for the majority of Haemoproteus species. Information on their exoerythrocytic development is particularly fragmental and controversial. This study aimed to gain new knowledge on life-cycle of the widespread blood parasite Haemoproteus majoris. Methods Turdus pilaris and Parus major naturally infected with lineages hPHYBOR04 and hPARUS1 of H. majoris, respectively, were wild-caught and the parasites were identified using microscopic examination of gametocytes and PCR-based testing. Bayesian phylogeny was used to determine relationships between H. majoris lineages. Exoerythrocytic stages (megalomeronts) were reported using histological examination and laser microdissection was applied to isolate single megalomeronts for genetic analysis. Culicoides impunctatus biting midges were experimentally exposed in order to follow sporogonic development of the lineage hPHYBOR04. Results Gametocytes of the lineage hPHYBOR04 are indistinguishable from those of the widespread lineage hPARUS1 of H. majoris, indicating that both of these lineages belong to the H. majoris group. Phylogenetic analysis supported this conclusion. Sporogony of the lineage hPHYBOR04 was completed in C. impunctatus biting midges. Morphologically similar megalomeronts were reported in internal organs of both avian hosts. These were big roundish bodies (up to 360 μm in diameter) surrounded by a thick capsule-like wall and containing irregularly shaped cytomeres, in which numerous merozoites developed. DNA sequences obtained from single isolated megalomeronts confirmed the identification of H. majoris. Conclusions Phylogenetic analysis identified a group of closely related H. majoris lineages, two of which are characterized not only by morphologically identical blood stages, but also complete sporogonic development in C. impunctatus and development of morphologically similar megalomeronts. It is probable that other lineages belonging to the same group would bear the same characters and phylogenies based on partial cytb gene could be used to predict life-cycle features in avian haemoproteids including vector identity and patterns of exoerythrocytic merogony. This study reports morphologically unique megalomeronts in naturally infected birds and calls for research on exoerythrocytic development of haemoproteids to better understand pathologies caused in avian hosts.

Study on life-cycle design for the post mass production paradigm

2000 ◽  
Vol 14 (2) ◽  
pp. 149-161 ◽  
Author(s):  
YASUSHI UMEDA ◽  
AKIRA NONOMURA ◽  
TETSUO TOMIYAMA
Keyword(s):  
Life Cycle ◽  
Mass Production ◽  
Product Life Cycle ◽  
Knowledge Bases ◽  
Life Cycles ◽  
Simulation System ◽  
Product Life ◽  
Cycle Simulation ◽  
Life Cycle Design ◽  
Modular Structures

Environmental issues require a new manufacturing paradigm because the current mass production and mass consumption paradigm inevitably cause them. We have already proposed a new manufacturing paradigm called the “Post Mass Production Paradigm (PMPP)” that advocates sustainable production by decoupling economic growth from material and energy consumption. To realize PMPP, appropriate planning of a product life cycle (design of life cycle) is indispensable in addition to the traditional environmental conscious design methodologies. For supporting the design of a life cycle, this paper proposes a life-cycle simulation system that consists of a life-cycle simulator, an optimizer, a model editor, and knowledge bases. The simulation system evaluates product life cycles from an integrated view of environmental consciousness and economic profitability and optimizes the life cycles. A case study with the simulation system illustrates that the environmental impacts can be reduced drastically without decreasing corporate profits by appropriately combining maintenance, reuse and recycling, and by taking into consideration that optimized modular structures differ according to life-cycle options.

The life cycle of Clytia linearis and Clytia noliformis: metagenic campanulariids (Cnidaria: Hydrozoa) with contrasting polyp and medusa stages

2002 ◽  
Vol 82 (4) ◽  
pp. 541-553 ◽  
Author(s):  
Alberto Lindner ◽  
Alvaro E. Migotto
Keyword(s):  
Life Cycle ◽  
Species Identification ◽  
Life Cycles ◽  
Bell Diameter

The life cycles of Clytia linearis and Clytia noliformis, two common campanulariids previously known solely from their polyp and young medusa stages, were investigated. Adult medusae of C. linearis have a bell diameter of 2·5–3·6 mm, and up to 29 tentacles. The bell is almost flat when relaxed and C-type microbasic mastigophore nematocysts form a cluster at the tip of the tentacles. Mature medusae of C. noliformis have a more hemispherical, saucer-shaped bell (3·5–4·5 mm in diameter), up to 16 tentacles, and no diagnostic nematocysts. Polyps of both species also differ in morphology, colour, and cnidome, and a possible resting structure is described for C. linearis. The relevance of characters from the perisarc and hydranths for taxonomy within the Campanulariidae is also evaluated, and whether the size of nematocysts is variable or not, and therefore appropriate for species identification.

Observing microscopic phases of lichen life cycles on transparent substrata placed in situ

2005 ◽  
Vol 37 (5) ◽  
pp. 373-382 ◽  
Author(s):  
William B. SANDERS
Keyword(s):  
Life Cycle ◽  
Developmental Stages ◽  
Life Cycles ◽  
Potential Significance ◽  
Free Living ◽  
Lichen Community ◽  
One Year ◽  
The One ◽  
Observation Period

The utility of plastic cover slips as a substratum for in situ study of lichen developmental stages is further explored in a neotropical foliicolous lichen community and in a European temperate corticolous community. Twenty-one months after placement in the tropical forest, the cover slips bore foliicolous lichen thalli with several species producing characteristic ascocarps and ascospores, indicating the suitability of the substratum for completion of the life cycle of these lichens. On cover slips placed within the temperate corticolous community, lichen propagules anchored to the substratum with relatively short attachment hyphae but did not develop further within the one year observation period. Intimately intermixed microbial communities of short-celled, mainly pigmented fungi and chlorophyte algae developed upon the transparent substratum. Among the algae, Trebouxia cells, often in groups showing cell division and without associated lichenizing hyphae, were commonly observed. The potential significance of the free-living populations in the life cycle of Trebouxia and in those of Trebouxia-associated lichen fungi is discussed.

scholarly journals Sexual reproduction and genetic exchange in parasitic protists

Parasitology ◽  
2014 ◽  
Vol 142 (S1) ◽  
pp. S120-S127 ◽  
Author(s):  
GARETH D. WEEDALL ◽  
NEIL HALL
Keyword(s):  
Life Cycle ◽  
Genome Sequencing ◽  
Common Ancestor ◽  
Life Cycles ◽  
Animal Disease ◽  
Eukaryotic Evolution ◽  
Sequencing Technology ◽  
Parasite Reproduction ◽  
The Common ◽  
Higher Eukaryotes

SUMMARYA key part of the life cycle of an organism is reproduction. For a number of important protist parasites that cause human and animal disease, their sexuality has been a topic of debate for many years. Traditionally, protists were considered to be primitive relatives of the ‘higher’ eukaryotes, which may have diverged prior to the evolution of sex and to reproduce by binary fission. More recent views of eukaryotic evolution suggest that sex, and meiosis, evolved early, possibly in the common ancestor of all eukaryotes. However, detecting sex in these parasites is not straightforward. Recent advances, particularly in genome sequencing technology, have allowed new insights into parasite reproduction. Here, we review the evidence on reproduction in parasitic protists. We discuss protist reproduction in the light of parasitic life cycles and routes of transmission among hosts.

Sign in / Sign up

Export Citation Format

Share Document