scholarly journals New Composition Concept for Keroncong Music in the Oboe Concerto with Keroncong and Orchestra

2018 ◽  
Vol 5 (2) ◽  
pp. 75-85
Author(s):  
Singgih Sanjaya
Keyword(s):  
Instrumental Music ◽  
Driving Force ◽  
English Horn ◽  
Special Composition ◽  
Solo Instrument

this research aims to design a new concept in keroncong music creation with an explorative method. Keroncong is one kind of entertainment musics in indonesia that has a long existece and evolved up to today. Keroncong music is a musical mixture of a western diatonic music with Javanese gamelan music. the term of keroncong comes from the sound “...crong crong crong...” on the ukulele instrument that played rasquardo. an instrumentation music consists of: vocals, violin, flute, cak, cuk, cello, guitar, and bass. during this moment, keroncong is basically just served as a vocal accompaniment music. this becomes a driving force for the author to compose a special composition for keroncong music solo instrument. there is a new concept used in the arranging of this composition, as follows. this composition is designing a concerto, which is a type of the instrumental musics with a western diatonic instrument on the part-one of the solo oboe and an English horn in part-two, with keroncong music and orchestra. the conclusion of these designs are as follows. Keroncong music will be able to stand on its own as an instrumental music.

Pedro Díaz

2020 ◽  
pp. 32-39
Author(s):  
Michele Fiala
Keyword(s):  
Instrumental Music ◽  
English Horn ◽  
Metropolitan Opera ◽  
Wind Instrument ◽  
Relationship Of ◽  
The Relationship

Pedro Díaz is the solo English Horn of the Metropolitan Opera Orchestra. In this interview, he talks about his start in music, auditions, becoming an English horn player, musical phrasing, and breathing and support on a wind instrument. He also discusses the relationship of vocal to instrumental music, how to become a good ensemble player, his pedagogy, and highlights of his career.

Organization of tight junctions in the choroid plexus epithelium

1978 ◽  
Vol 36 (2) ◽  
pp. 336-337
Author(s):  
B. Van Deurs ◽  
J. K. Koehler
Keyword(s):  
Choroid Plexus ◽  
Present Report ◽  
Freeze Fracture ◽  
Barrier Properties ◽  
Cell Junctions ◽  
Structural Basis ◽  
Apical Surface ◽  
Choroid Plexus Epithelium ◽  
Solid Nitrogen ◽  
Special Composition

The choroid plexus epithelium constitutes a blood-cerebrospinal fluid (CSF) barrier, and is involved in regulation of the special composition of the CSF. The epithelium is provided with an ouabain-sensitive Na/K-pump located at the apical surface, actively pumping ions into the CSF. The choroid plexus epithelium has been described as “leaky” with a low transepithelial resistance, and a passive transepithelial flux following a paracellular route (intercellular spaces and cell junctions) also takes place. The present report describes the structural basis for these “barrier” properties of the choroid plexus epithelium as revealed by freeze fracture.Choroid plexus from the lateral, third and fourth ventricles of rats were used. The tissue was fixed in glutaraldehyde and stored in 30% glycerol. Freezing was performed either in liquid nitrogen-cooled Freon 22, or directly in a mixture of liquid and solid nitrogen prepared in a special vacuum chamber. The latter method was always used, and considered necessary, when preparations of complementary (double) replicas were made.

In situ TEM Studies of agglomeration of sub-nanometer Ru layers in Ru/C multilayers

1992 ◽  
Vol 50 (1) ◽  
pp. 256-257
Author(s):  
Tai D. Nguyen ◽  
Ronald Gronsky ◽  
Jeffrey B. Kortright
Keyword(s):  
Layered Structure ◽  
Driving Force ◽  
High Energy ◽  
Superior Performance ◽  
In Situ Tem ◽  
Rayleigh Instability ◽  
Practical Applications ◽  
Transmission Electron ◽  
Diffraction Patterns

Nanometer period Ru/C multilayers are one of the prime candidates for normal incident reflecting mirrors at wavelengths < 10 nm. Superior performance, which requires uniform layers and smooth interfaces, and high stability of the layered structure under thermal loadings are some of the demands in practical applications. Previous studies however show that the Ru layers in the 2 nm period Ru/C multilayer agglomerate upon moderate annealing, and the layered structure is no longer retained. This agglomeration and crystallization of the Ru layers upon annealing to form almost spherical crystallites is a result of the reduction of surface or interfacial energy from die amorphous high energy non-equilibrium state of the as-prepared sample dirough diffusive arrangements of the atoms. Proposed models for mechanism of thin film agglomeration include one analogous to Rayleigh instability, and grain boundary grooving in polycrystalline films. These models however are not necessarily appropriate to explain for the agglomeration in the sub-nanometer amorphous Ru layers in Ru/C multilayers. The Ru-C phase diagram shows a wide miscible gap, which indicates the preference of phase separation between these two materials and provides an additional driving force for agglomeration. In this paper, we study the evolution of the microstructures and layered structure via in-situ Transmission Electron Microscopy (TEM), and attempt to determine the order of occurence of agglomeration and crystallization in the Ru layers by observing the diffraction patterns.

The nucleation of cavities at grain boundaries

1987 ◽  
Vol 45 ◽  
pp. 288-291
Author(s):  
P. J. Goodhew
Keyword(s):  
Surface Tension ◽  
Surface Energy ◽  
Grain Boundaries ◽  
Radiation Damage ◽  
Impurity Concentration ◽  
Driving Force ◽  
Nucleation And Growth ◽  
Phase Boundaries ◽  
Cavity Nucleation ◽  
Spherical Bubble

Cavity nucleation and growth at grain and phase boundaries is of concern because it can lead to failure during creep and can lead to embrittlement as a result of radiation damage. Two major types of cavity are usually distinguished: The term bubble is applied to a cavity which contains gas at a pressure which is at least sufficient to support the surface tension (2g/r for a spherical bubble of radius r and surface energy g). The term void is generally applied to any cavity which contains less gas than this, but is not necessarily empty of gas. A void would therefore tend to shrink in the absence of any imposed driving force for growth, whereas a bubble would be stable or would tend to grow. It is widely considered that cavity nucleation always requires the presence of one or more gas atoms. However since it is extremely difficult to prepare experimental materials with a gas impurity concentration lower than their eventual cavity concentration there is little to be gained by debating this point.

The driving force of craniopharyngioma growth

2014 ◽  
Vol 122 (03) ◽  
Author(s):  
C Stache ◽  
A Hölsken ◽  
SM Schlaffer ◽  
A Hess ◽  
M Metzler ◽  
...  
Keyword(s):  
Driving Force

Failure to control inflammation as a driving force of symptoms and phenotype in the NSG mouse model of ulcerative colitis

2018 ◽  
Author(s):  
H Jodeleit ◽  
P Palamides ◽  
O Al-amodi ◽  
G Beikircher ◽  
S Schönthaler ◽  
...  
Keyword(s):  
Ulcerative Colitis ◽  
Mouse Model ◽  
Driving Force ◽  
Nsg Mouse

Analysis of magnetic force and dynamic characteristic for non-contact permanent magnet linear drive device

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1337-1345
Author(s):  
Chuan Zhao ◽  
Feng Sun ◽  
Junjie Jin ◽  
Mingwei Bo ◽  
Fangchao Xu ◽  
...  
Keyword(s):  
Finite Element ◽  
Permanent Magnet ◽  
Dynamic Characteristic ◽  
Driving Force ◽  
Magnetic Circuit ◽  
Response Speed ◽  
Computation Method ◽  
Element Analysis ◽  
Element Simulation ◽  
The Relationship

This paper proposes a computation method using the equivalent magnetic circuit to analyze the driving force for the non-contact permanent magnet linear drive system. In this device, the magnetic driving force is related to the rotation angle of driving wheels. The relationship is verified by finite element analysis and measuring experiments. The result of finite element simulation is in good agreement with the model established by the equivalent magnetic circuit. Then experiments of displacement control are carried out to test the dynamic characteristic of this system. The controller of the system adopts the combination control of displacement and angle. The results indicate that the system has good performance in steady-state error and response speed, while the maximum overshoot needs to be reduced.

Economic Growth: New Problems and New Risks

2006 ◽  
pp. 20-37 ◽  
Author(s):  
M. Ershov
Keyword(s):  
Economic Growth ◽  
Foreign Exchange ◽  
Driving Force ◽  
Structural Changes ◽  
Rate Of Growth

The economic growth, which is underway in Russia, raises new questions to be addressed. How to improve the quality of growth, increasing the role of new competitive sectors and transforming them into the driving force of growth? How can progressive structural changes be implemented without hampering the rate of growth in general? What are the main external and internal risks, which may undermine positive trends of development? The author looks upon financial, monetary and foreign exchange aspects of the problem and comes up with some suggestions on how to make growth more competitive and sustainable.

Maxim Berezovsky C-dur symphony in a context of new biographical scenario of artist’s life-creativity

2018 ◽  
pp. 13-25
Author(s):  
Olha Shumilina
Keyword(s):  
Eighteenth Century ◽  
Instrumental Music ◽  
Analytical Approach ◽  
Spiritual Direction ◽  
Theoretical Research ◽  
Orchestral Music ◽  
Musical Life ◽  
Analysis And Synthesis ◽  
Mental Modeling ◽  
Independent Work

Relevance of the study. The article studies recently found symphony of the prominent Ukrainian composer of the second half of the eighteenth century Maxim Berezovsky. He is widely known now as the author of cyclic spiritual concerts written for the Orthodox worship, and is practically unknown as a musician instrumentalist associated with the imperial theater and the court musical life. The work of M. Berezovsky as a secular musician determined the creative interest in composing instrumental music intended for secular chamber and orchestral music. Main objective of the article is a clarification of M.Berezovsky symphony as one of secular field artworks in the light of new summaries about artist’s life-creativity. Methodology. Taking into account peculiarities of the material and the analytical approach to its study, the methods of theoretical research have been chosen(abstraction, analysis and synthesis, induction and deduction, mental modeling, ascension from abstract to concrete, etc.). Conclusions. As a result of a study the symphony analysis in a context of new authentic statements about M.Berezovsky’s life-creativity. It was stated that this artwork was written not accidentally and detects absolute awareness of the artist in all composer’s niceties – how to build a topic and build a homophonic construction based on it, in a technique of orchestral construction, form creations of that time and etc. From the beginning of his creative career, M. Berezovsky was well aware of the possibilities of the orchestra as a performer, attached to the Italian opera and instrumental music. Symphony enriches our imagination about the works of M. Berezovsky in the field of secular instrumental and operatic music and extends the range of works of the artist beyond the spiritual direction. Some signs indicate that the Symphony was not an independent work, but an overture to the opera Demofont.

Sign in / Sign up

Export Citation Format

Share Document