Appraising the Development Potential of Ekofisk Over Tor Formation in the Halfdan Field, using a Multi-Disciplinary Approach to Well Planning and Applying Advances in Technology to Enhance Well Placement, Completion, Productivity and Recovery

2021 ◽  
Author(s):  
Anton Andreev ◽  
Michael Pitts ◽  
Andrew Hoover ◽  
Eyad Mohamed Elhassan ◽  
Felix Sebastian Bexkens ◽  
...  

Abstract Demonstrating a viable development for the Ekofisk reservoir directly above the producing Tor reservoir in the Halfdan Field (Danish North Sea) has historically been challenging. A recent well shows the value of cross-disciplinary collaboration and new technology to maximize recovery and mitigate reservoir and drilling risks. Specifically, 4D seismic was utilized when planning the well, while placement was optimized by using advanced geosteering tools. Well optimization was further enhanced by adopting novel completion and stimulation technologies. Pressure data and 4D seismic show that Tor and Ekofisk are in dynamic communication, but the degree of communication varies locally. The integration of 4D seismic with other disciplines’ input succeeded in optimizing the well placement and narrowed the significant pore pressure uncertainty along the 12,000-ft reservoir section. To maximize well length within the target zone and reduce the risk of being faulted out of the target reservoir deep resistivity was used to steer the well in the optimal layers. This contributed to 99% of the reservoir section being placed in the target zone. Lessons learnt from an earlier appraisal well and modest production experience in this part of the Ekofisk reservoir helped to justify the choice of selective completion zones (Sliding Side Door) in the inner part of the horizontal drain in order to minimize the impact of potential water or premature water breakthrough from high-rate injection wells located in the underlying Tor reservoir. This decision was validated after drilling the inner part of the well, where water-swept zones were encountered in the heel, followed by a long gas pay zone in line with 4D seismic signal in the remainder of the inner well section. To mitigate the risk of an unwanted fracture connection and increase contact with the tight oil-saturated reservoir, a novel stimulation and completion technology was successfully deployed in the outer 6-inch open-hole section of the well. The acid needles completion, deployed across a 3,000-ft reservoir interval and comprising 224 needles deployed by pumping acid, was the first installation of its kind in the Danish North Sea. For the acid needles completion, this installation holds two distinctions: the largest number of acid needles installed in a well, and the combination of the acid needles completion with a different completion system in a single lateral for the first time.

2009 ◽  
pp. 5-36
Author(s):  
Maurizio Lisciandra

- The simple trade-off between incentive and risk, which is crucial to the agency problem, is not a sufficient explanation for the ineffectiveness of a specific output-related pay such as the contract system adopted in the US iron and steel industry during the second half of the nineteenth-century. The high rate of technological innovation along with workers' extensive bargaining power made output-related pay a sub-optimal solution. This stylised fact unveils the conflicting nature of piece-rate pay compared to fixed pay as new technology is introduced and stimulates an analysis of the interaction between technological change, bargaining powers, and payment systems which can be conducive to a better understanding of the agency problem and the use of incentive pay. Key words: Incentive Contracts, Inside Contracting, Unions, Technological Change. JEL Classification: J33, J51, N31, O33


First Break ◽  
2014 ◽  
Vol 32 (2017) ◽  
Author(s):  
M.A. Calvert ◽  
H.H. Roende ◽  
I.H. Herbert ◽  
J. Za ◽  
P. Hickman ◽  
...  

2007 ◽  
Vol 27 (First Serie (1) ◽  
pp. 81-97
Author(s):  
David Newlands ◽  
Alexandra Brehme
Keyword(s):  

2016 ◽  
Vol 1 (4) ◽  
pp. 150
Author(s):  
Veton Zejnullahi

The process of globalization, which many times is considered as new world order is affecting all spheres of modern society but also the media. In this paper specifically we will see the impact of globalization because we see changing the media access to global problems in general being listed on these processes. We will see that the greatest difficulties will have small media as such because the process is moving in the direction of creating mega media which thanks to new technology are reaching to deliver news and information at the time of their occurrence through choked the small media. So it is fair to conclude that the rapid economic development and especially the technology have made the world seem "too small" to the human eyes, because for real-time we will communicate with the world with the only one Internet connection, and also all the information are take for the development of events in the four corners of the world and direct from the places when the events happen. Even Albanian space has not left out of this process because the media in the Republic of Albania and the Republic of Kosovo are adapted to the new conditions under the influence of the globalization process. This fact is proven powerful through creating new television packages, written the websites and newspapers in their possession.


2019 ◽  
pp. 33-41
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan

The presented study discusses the issues of applying the Common Customs Tariff (CCT) rates of the Eurasian Economic Union (EAEU) on rough diamonds and the impact thereof on the exports of stones cut and polished inArmeniaand then exported toRussia.Aim. The study aims to identify the possible strategies Armenian diamond cutting and polishing companies could adopt as a response to the application of the CCT rates on rough diamonds and how it would affect exports to various destinations, namely to Russia.Tasks. The authors analyze the current state of the gems and jewelry sector and substantiate the need to either integrate it into the jewelry manufacturing sector or to apply various strategies to facilitate exports to either Russia or other destinations in the medium term in response to the application of the CCT rates.Methods. This study uses general scientific methods of cognition, including analytical and methodological approaches and elements of forecasting. Possible strategies the Armenian diamond cutting and polishing companies could adopt in the medium term in response to the application of the EAEU CCT rates are determined using the analytical research method, forecasts in the context of the developments in the Armenian gem processing and jewelry market and global trends, statistical data on the imports and exports of cut and polished gems and jewelry for 2014–2018 published by the UN Comtrade Statistics.Results. Statistics on the exports of processed diamonds from 2014 to 2018 highlights the issue associated with the loss of competitiveness suffered by Armenian companies (mainly in comparison with Indian diamond cutters). The major global trends in the diamond cutting and polishing business indicate that it could be virtually impossible for Armenian cutters and polishers to compete with Indian companies in the medium term if they do not comes to investing in new technology to achieve operational efficiency. For these companies, it is important not to lose the Russian market due to an increase in the tariff rate and concentrate on the processing of gems that are larger than 1 carat. Another strategy to avoid an increase in the customs tariff rates would depend on the Armenian government’s ability to negotiate with Russia in respect of direct imports of diamond stones from Russian manufactures. Two other options for Armenian cutters involve focusing on cutting and polishing of rubies, sapphires, emeralds, etc. or integrating into the jewelry sector either by being the primary supplier or by considering this business as a channel to sell processed diamond stones by setting up their own jewelry manufacturing companies.Conclusions. With CCT going into effect in January 2021 and India’s dominant role in the diamond cutting and polishing business, Armenia needs to carefully consider all of the strategies the Armenian companies could adopt, as discussed above. As a member state of the EAEU, Armenia freely exports to Russia, however, further exports to Russia would depend on Armenia’s ability to ensure that cost-effective operations are in place, or to concentrate on the processing of precious gems rather than diamonds, or to switch to the manufacturing of jewelry items as a major export item.Practical Implication. The findings of this study could be of interest to the Ministry of Economy of the Republic of Armenia and Business Armenia that could be used in elaborating the strategy for the development of Armenian gems and jewelry sector of the economy.


2017 ◽  
Vol 45 (10) ◽  
pp. 1607-1618 ◽  
Author(s):  
Seung Yun Lee ◽  
Sunho Jung ◽  
Sangdo Oh ◽  
Seong Hoon Park

We proposed that a moderator, others' similarity, would determine the impact of high participation rates of others on an individual's charitable behavior, and aimed to show that this moderator would work through the diffusion of responsibility motive. Participants (N = 152 undergraduate students) completed measures of charitable behavior and diffusion of responsibility, after being assigned to 1 of 2 conditions where a set percentage of other students (manipulated as either similar undergraduate students or dissimilar graduate students) were stated to have already donated to a charitable campaign (high contribution condition = 70% participation, low contribution condition = 30% participation). Our results showed that the high participation rate of others increased an individual's charitable behavior when the others in question were similar to that individual, but not when the others were dissimilar. In addition, the high rate of participation by others increased the diffusion of responsibility motive when the others in question were dissimilar to that individual, leading to a negative effect on that individual's charitable behavior.


2019 ◽  
Vol 58 (2) ◽  
pp. 315-337 ◽  
Author(s):  
Thomas Cogswell

AbstractHistorians have not paid close attention to the activities of freebooters operating out of Dunkirk in the late 1620s. This essay corrects that omission by first studying the threat from Dunkirk to England's east coast and then addressing how the central government, counties, and coastal towns responded. A surprisingly rich vein of manuscript material from Great Yarmouth and particularly from the Suffolk fishing community of Aldeburgh informs this case study of the impact of this conflict around the North Sea.


Author(s):  
Gwenaëlle Wain ◽  
Loreleï Guéry ◽  
David Michael Kaplan ◽  
Daniel Gaertner

Abstract Numerous pelagic species are known to associate with floating objects (FOBs), including tropical tunas. Purse seiners use this behaviour to facilitate the capture of tropical tunas by deploying artificial drifting fish aggregating devices (dFADs). One major recent change has been the integration of echosounders in satellite-tracked GPS buoys attached to FOBs, allowing fishers to remotely estimate fishable biomass. Understanding the effects of this new technology on catch of the three main tuna species (yellowfin tuna, Thunnus albacares; bigeye tuna, Thunnus obesus; and skipjack tuna, Katsuwonus pelamis) is important to accurately correct for this change in catch-per-unit-effort (CPUE) indices used for stock assessments. We analysed catch data from the French purse seine fleet for the period 2010–2017 in the Indian Ocean to assess the impact of this fleet’s switch to echosounder buoys around 2012. Results indicate that echosounders do not increase the probability a set will be succesful, but they have a positive effect on catch per set, with catches on average increasing by ≈2−2.5 tonnes per set (≈10%) when made on the vessel's own dFADs equipped with an echosounder buoy. Increases were due to a decrease in sets below ≈25 tonnes and an increase in those greater than ≈25 tonnes, with a non-linear transition around this threshold. This increase explains the considerable investment of purse seiners in echosounder buoys, but also raises concerns about bias in stock size estimates based on CPUE if we do not correct for this fishing efficiency increase.


2021 ◽  
Vol 22 (13) ◽  
pp. 7051
Author(s):  
Vitalii Kim ◽  
Emily Gudvangen ◽  
Oleg Kondratiev ◽  
Luis Redondo ◽  
Shu Xiao ◽  
...  

Intense pulsed electric fields (PEF) are a novel modality for the efficient and targeted ablation of tumors by electroporation. The major adverse side effects of PEF therapies are strong involuntary muscle contractions and pain. Nanosecond-range PEF (nsPEF) are less efficient at neurostimulation and can be employed to minimize such side effects. We quantified the impact of the electrode configuration, PEF strength (up to 20 kV/cm), repetition rate (up to 3 MHz), bi- and triphasic pulse shapes, and pulse duration (down to 10 ns) on eliciting compound action potentials (CAPs) in nerve fibers. The excitation thresholds for single unipolar but not bipolar stimuli followed the classic strength–duration dependence. The addition of the opposite polarity phase for nsPEF increased the excitation threshold, with symmetrical bipolar nsPEF being the least efficient. Stimulation by nsPEF bursts decreased the excitation threshold as a power function above a critical duty cycle of 0.1%. The threshold reduction was much weaker for symmetrical bipolar nsPEF. Supramaximal stimulation by high-rate nsPEF bursts elicited only a single CAP as long as the burst duration did not exceed the nerve refractory period. Such brief bursts of bipolar nsPEF could be the best choice to minimize neuromuscular stimulation in ablation therapies.


Sign in / Sign up

Export Citation Format

Share Document