Formation of supramolecular nanostructures via in situ self-assembly and post-assembly modification of a biocatalytically constructed dipeptide hydrazide

2021 ◽  
Author(s):  
Yuki Shintani ◽  
Taku Ohtomi ◽  
Aya Shibata ◽  
Yoshiaki Kitamura ◽  
Koichiro M. Hirosawa ◽  
...  
Keyword(s):  
Self Assembly ◽  
Bond Formation ◽  
Hydrazone Bond ◽  
Supramolecular Architectures ◽  
Aqueous Conditions

The in situ self-assembly of a biocatalytically constructed dipeptide hydrazide gives rise to supramolecular hydrogels, consisting of networks of supramolecular nanoarchitectures, under mild aqueous conditions. Moreover, the post-assembly modification via hydrazone bond formation enables the decoration of the prefabricated supramolecular architectures.

scholarly journals ATP-fuelled self-assembly to regulate chemical reactivity in the time domain

2020 ◽  
Vol 11 (6) ◽  
pp. 1518-1522 ◽  
Author(s):  
Maria A. Cardona ◽  
Leonard J. Prins
Keyword(s):  
Time Domain ◽  
Self Assembly ◽  
Chemical Reactivity ◽  
Bond Formation ◽  
Complex Mixture ◽  
Hydrazone Bond ◽  
The Time Domain

The addition of ATP under dissipative conditions to a complex mixture causes the transient upregulation of hydrazone-bond formation.

Controllable Self-Assembly of 9,10-Diphenylanthracene into Micro-Nanostructures from 0-Dimension to 3-Dimension by Simple Post-Drying Thermal Annealing Method

2014 ◽  
Vol 609-610 ◽  
pp. 266-270
Author(s):  
Jing Wei Sun ◽  
Mi Ouyang ◽  
Cheng Zhang
Keyword(s):  
Thermal Annealing ◽  
Self Assembly ◽  
Annealing Temperature ◽  
Electronic Devices ◽  
Transformation Mechanism ◽  
Surface Deposition ◽  
Supramolecular Architectures ◽  
In Situ Fabrication ◽  
Annealing Method

A post-drying thermal annealing method is proposed to successfully fabricate micro-/nanostructures with 9,10-diphenylanthracene (DPA). Through varying operating temperature, different morphologies from 0-D to 3-D of pure DPA self-assembly were achieved and studied by SEM, XRD and PL spectra. The morphology transformation mechanism was also investigated. These results indicate that varying annealing temperature is an effective way to control the supramolecular architectures of DPA. In addition, such in situ fabrication on a substrate will provide possibility for manufacture of electronic devices which normally require surface deposition of nanomaterials.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Probing the Dynamic Self-Assembly Behaviour of Photoswitchable Wormlike Micelles in Real Time

2018 ◽  
Author(s):  
Elaine A. Kelly ◽  
Judith E. Houston ◽  
Rachel Evans
Keyword(s):  
Real Time ◽  
Absorption Spectroscopy ◽  
Self Assembly ◽  
Uv Light ◽  
Wormlike Micelles ◽  
Tetraethylene Glycol ◽  
Light Illumination ◽  
First Time ◽  
Dependent Processes

Understanding the dynamic self-assembly behaviour of azobenzene photosurfactants (AzoPS) is crucial to advance their use in controlled release applications such as<i></i>drug delivery and micellar catalysis. Currently, their behaviour in the equilibrium <i>cis-</i>and <i>trans</i>-photostationary states is more widely understood than during the photoisomerisation process itself. Here, we investigate the time-dependent self-assembly of the different photoisomers of a model neutral AzoPS, <a>tetraethylene glycol mono(4′,4-octyloxy,octyl-azobenzene) </a>(C<sub>8</sub>AzoOC<sub>8</sub>E<sub>4</sub>) using small-angle neutron scattering (SANS). We show that the incorporation of <i>in-situ</i>UV-Vis absorption spectroscopy with SANS allows the scattering profile, and hence micelle shape, to be correlated with the extent of photoisomerisation in real-time. It was observed that C<sub>8</sub>AzoOC<sub>8</sub>E<sub>4</sub>could switch between wormlike micelles (<i>trans</i>native state) and fractal aggregates (under UV light), with changes in the self-assembled structure arising concurrently with changes in the absorption spectrum. Wormlike micelles could be recovered within 60 seconds of blue light illumination. To the best of our knowledge, this is the first time the degree of AzoPS photoisomerisation has been tracked <i>in</i><i>-situ</i>through combined UV-Vis absorption spectroscopy-SANS measurements. This technique could be widely used to gain mechanistic and kinetic insights into light-dependent processes that are reliant on self-assembly.

In situ Time-Resolved Small-Angle X-ray Scattering Reveals the Formation Kinetics of Polyelectrolyte Complex Micelles

2019 ◽  
Author(s):  
Hao Wu ◽  
Jeffrey Ting ◽  
Siqi Meng ◽  
Matthew Tirrell
Keyword(s):  
Small Angle ◽  
Self Assembly ◽  
Electrostatic Interactions ◽  
Polyelectrolyte Complex ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Scattering ◽  
Kinetics Of ◽  
Ray Scattering

We have directly observed the <i>in situ</i> self-assembly kinetics of polyelectrolyte complex (PEC) micelles by synchrotron time-resolved small-angle X-ray scattering, equipped with a stopped-flow device that provides millisecond temporal resolution. This work has elucidated one general kinetic pathway for the process of PEC micelle formation, which provides useful physical insights for increasing our fundamental understanding of complexation and self-assembly dynamics driven by electrostatic interactions that occur on ultrafast timescales.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

scholarly journals An In-Situ Reaction Route to Molecular Level Dispersed Bisimide and ZnO Nanorod Hybrids with Efficient Photo-Induced Charge Transfer

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Chunzheng Lv ◽  
Lirong He ◽  
Jiahong Tang ◽  
Feng Yang ◽  
Chuhong Zhang
Keyword(s):  
Charge Transfer ◽  
Electric Field ◽  
Self Assembly ◽  
Molecular Level ◽  
Surface Photovoltage ◽  
Zno Nanorod ◽  
In Situ Reaction ◽  
Perylene Bisimide ◽  
Induced Charge

AbstractAs an important photoconductive hybrid material, perylene/ZnO has attracted tremendous attention for photovoltaic-related applications, but generally faces a great challenge to design molecular level dispersed perylenes/ZnO nanohybrids due to easy phase separation between perylenes and ZnO nanocrystals. In this work, we reported an in-situ reaction method to prepare molecular level dispersed H-aggregates of perylene bisimide/ZnO nanorod hybrids. Surface photovoltage and electric field-induced surface photovoltage spectrum show that the photovoltage intensities of nanorod hybrids increased dramatically for 100 times compared with that of pristine perylene bisimide. The enhancement of photovoltage intensities resulting from two aspects: (1) the photo-generated electrons transfer from perylene bisimide to ZnO nanorod due to the electric field formed on the interface of perylene bisimide/ZnO; (2) the H-aggregates of perylene bisimide in ZnO nanorod composites, which is beneficial for photo-generated charge separation and transportation. The introduction of ordered self-assembly thiol-functionalized perylene-3,4,9,10-tetracarboxylic diimide (T-PTCDI)/ ZnO nanorod composites induces a significant improvement in incident photo-to-electron conversion efficiency. This work provides a novel mentality to boost photo-induced charge transfer efficiency, which brings new inspiration for the preparation of the highly efficient solar cell.

Sign in / Sign up

Export Citation Format

Share Document