scholarly journals A Robust and General Approach to Quantitatively Conjugate Enzymes to Plasmonic Nanoparticles

2019 ◽  
Author(s):  
Yuyang Wang ◽  
Karsten van Asdonk ◽  
Peter Zijlstra
Keyword(s):  
Protein Function ◽  
Colloidal Stability ◽  
Near Field ◽  
Particle Surface ◽  
Field Enhancement ◽  
Medical Diagnostics ◽  
Enzyme Concentration ◽  
Plasmonic Nanoparticles ◽  
Protein Activity ◽  
Refractive Index Sensitivity

<div>Bioconjugates of plasmonic nanoparticles have received considerable attention due to their potential biomedical applications. Succesfull bioconjugation requires control over the number and activity of the conjugated proteins, and the colloidal stability of the particles. In practice, this requires re-optimization of the conjugation protocol for each combination of protein and nanoparticle. Here we report a robust and general protocol that allows for the conjugation of a range of proteins to different types of nanoparticles using very short polyethylene-glycol(PEG) linkers, while simultaneously preserving protein activity and colloidal stability. The use of short linkers ensures that the protein is located close to the particle surface, where their refractive index sensitivity and near-field enhancement is maximal. We demonstrate that the use a Tween20 containing stabilizing buffer is critical in maintaining colloidal stability and protein function throughout the protocol. We obtain quantitative control over the average number of enzymes per particle by either varying the number of functional groups on the particle, or the enzyme concentration during incubation. This new route of preparing quantitative protein-nanoparticle bioconjugates paves the way to develop rational and quantitative strategies to functionalize nanoparticles for applications in sensing, medical diagnostics and drug delivery.</div>

scholarly journals A Robust and General Approach to Quantitatively Conjugate Enzymes to Plasmonic Nanoparticles

2019 ◽  
Author(s):  
Yuyang Wang ◽  
Karsten van Asdonk ◽  
Peter Zijlstra
Keyword(s):  
Protein Function ◽  
Colloidal Stability ◽  
Near Field ◽  
Particle Surface ◽  
Field Enhancement ◽  
Medical Diagnostics ◽  
Enzyme Concentration ◽  
Plasmonic Nanoparticles ◽  
Protein Activity ◽  
Refractive Index Sensitivity

<div>Bioconjugates of plasmonic nanoparticles have received considerable attention due to their potential biomedical applications. Succesfull bioconjugation requires control over the number and activity of the conjugated proteins, and the colloidal stability of the particles. In practice, this requires re-optimization of the conjugation protocol for each combination of protein and nanoparticle. Here we report a robust and general protocol that allows for the conjugation of a range of proteins to different types of nanoparticles using very short polyethylene-glycol(PEG) linkers, while simultaneously preserving protein activity and colloidal stability. The use of short linkers ensures that the protein is located close to the particle surface, where their refractive index sensitivity and near-field enhancement is maximal. We demonstrate that the use a Tween20 containing stabilizing buffer is critical in maintaining colloidal stability and protein function throughout the protocol. We obtain quantitative control over the average number of enzymes per particle by either varying the number of functional groups on the particle, or the enzyme concentration during incubation. This new route of preparing quantitative protein-nanoparticle bioconjugates paves the way to develop rational and quantitative strategies to functionalize nanoparticles for applications in sensing, medical diagnostics and drug delivery.</div>

scholarly journals Plasmonic coupling in Au, Ag and Al nanosphere homo-dimers for sensing and SERS

2018 ◽  
Vol 7 (2) ◽  
pp. 83-90 ◽  
Author(s):  
J. Katyal
Keyword(s):  
Refractive Index ◽  
Near Field ◽  
Visible Region ◽  
Field Enhancement ◽  
Interparticle Spacing ◽  
Localized Surface Plasmon ◽  
Refractive Index Sensitivity ◽  
Plasmonic Material ◽  
Sensing Applications ◽  
Index Sensitivity

The localized surface plasmon resonance of homo-dimer nanostructures is studied using FDTD simulations. The calculated LSPR wavelength of Au, Ag and Al nanosphere forming a homo-dimer configuration is compared and the results reveal a larger LSPR shift in Ag and Al homo-dimer than in Au homo-dimer. Taking the sensitivity of LSPR shape to the size and interparticle spacing of nanoparticle along with a surrounding refractive index, parameters like refractive index sensitivity have been determined. The spherical homo-dimer over the whole range of particle size, studied here shows the index sensitivity order as Ag>Al>Au. Hence, the use of plasmonic material towards the refractive index sensing applications is useful in this order.  The average refractive index sensitivities of Ag, Al and Au are 287.09 nm/RIU, 210.21 nm/RIU and 192.47 nm/RIU in DUV-Visible-NIR region. Apart from LSPR shift, the highly confined near-field intensity enhancement of homo-dimer nanostructures for SERS has also been studied. The interacting homo-dimer nanoparticles reveals intensity enhancements in the junction. Comparing the field enhancement for Au, Ag and Al homo-dimer nanostructure 10^8-10^9  have been theoretically predicted in DUV-UV-visible region which can be used to strongly enhance the Raman scattering of molecules.

scholarly journals Surface characterization of nanoparticles using near-field light scattering

2018 ◽  
Vol 9 ◽  
pp. 1228-1238 ◽  
Author(s):  
Eunsoo Yoo ◽  
Yizhong Liu ◽  
Chukwuazam A Nwasike ◽  
Sebastian R Freeman ◽  
Brian C DiPaolo ◽  
...  
Keyword(s):  
Light Scattering ◽  
Zeta Potential ◽  
Surface Characterization ◽  
Colloidal Stability ◽  
Near Field ◽  
Particle Surface ◽  
Superparamagnetic Iron Oxide ◽  
Scattering Intensity ◽  
Potential Applications ◽  
Poly Ethylene

The effect of nanoparticle surface coating characteristics on colloidal stability in solution is a critical parameter in understanding the potential applications of nanoparticles, especially in biomedicine. Here we explored the modification of the surface of poly(ethylene glycol)-coated superparamagnetic iron oxide nanoparticles (PEG-SPIOs) with the synthetic pseudotannin polygallol via interpolymer complexation (IPC). Changes in particle size and zeta potential were indirectly assessed via differences between PEG-SPIOs and IPC-SPIOs in particle velocity and scattering intensity using near-field light scattering. The local scattering intensity is correlated with the distance between the particle and waveguide, which is affected by the size of the particle (coating thickness) as well as the interactions between the particle and waveguide (related to the zeta potential of the coating). Therefore, we report here the use of near-field light scattering using nanophotonic force microscopy (using a NanoTweezerTM instrument, Halo Labs) to determine the changes that occurred in hydrated particle characteristics, which is accompanied by an analytical model. Furthermore, we found that altering the salt concentration of the suspension solution affected the velocity of particles due to the change of dielectric constant and viscosity of the solution. These findings suggest that this technique is suitable for studying particle surface changes and perhaps can be used to dynamically study reaction kinetics at the particle surface.

scholarly journals Effects of gap thickness and emitter location on the photoluminescence enhancement of monolayer MoS2 in a plasmonic nanoparticle-film coupled system

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 2097-2105
Author(s):  
Xiaozhuo Qi ◽  
Tsz Wing Lo ◽  
Di Liu ◽  
Lantian Feng ◽  
Yang Chen ◽  
...  
Keyword(s):  
Near Field ◽  
Central Area ◽  
Field Enhancement ◽  
Coupled System ◽  
Film Structure ◽  
Plasmonic Nanoparticle ◽  
Emitter Location ◽  
Radiation Properties ◽  
Radiation Enhancement ◽  
Quantum Emitters

AbstractPlasmonic nanocavities comprised of metal film-coupled nanoparticles have emerged as a versatile nanophotonic platform benefiting from their ultrasmall mode volume and large Purcell factors. In the weak-coupling regime, the particle-film gap thickness affects the photoluminescence (PL) of quantum emitters sandwiched therein. Here, we investigated the Purcell effect-enhanced PL of monolayer MoS2 inserted in the gap of a gold nanoparticle (AuNP)–alumina (Al2O3)–gold film (Au Film) structure. Under confocal illumination by a 532 nm CW laser, we observed a 7-fold PL peak intensity enhancement for the cavity-sandwiched MoS2 at an optimal Al2O3 thickness of 5 nm, corresponding to a local PL enhancement of ∼350 by normalizing the actual illumination area to the cavity’s effective near-field enhancement area. Full-wave simulations reveal a counterintuitive fact that radiation enhancement comes from the non-central area of the cavity rather than the cavity center. By scanning an electric dipole across the nanocavity, we obtained an average radiation enhancement factor of about 65 for an Al2O3 spacer thickness of 4 nm, agreeing well with the experimental thickness and indicating further PL enhancement optimization. Our results indicate the importance of configuration optimization, emitter location and excitation condition when using such plasmonic nanocavities to modulate the radiation properties of quantum emitters.

scholarly journals Photonic resonator interferometric scattering microscopy

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Nantao Li ◽  
Taylor D. Canady ◽  
Qinglan Huang ◽  
Xing Wang ◽  
Glenn A. Fried ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Scattered Light ◽  
Near Field ◽  
Field Enhancement ◽  
Protein Detection ◽  
Significant Loss ◽  
Photonic Band Structure ◽  
Large Intensity ◽  
Photonic Band ◽  
Intensity Contrast

AbstractInterferometric scattering microscopy is increasingly employed in biomedical research owing to its extraordinary capability of detecting nano-objects individually through their intrinsic elastic scattering. To significantly improve the signal-to-noise ratio without increasing illumination intensity, we developed photonic resonator interferometric scattering microscopy (PRISM) in which a dielectric photonic crystal (PC) resonator is utilized as the sample substrate. The scattered light is amplified by the PC through resonant near-field enhancement, which then interferes with the <1% transmitted light to create a large intensity contrast. Importantly, the scattered photons assume the wavevectors delineated by PC’s photonic band structure, resulting in the ability to utilize a non-immersion objective without significant loss at illumination density as low as 25 W cm−2. An analytical model of the scattering process is discussed, followed by demonstration of virus and protein detection. The results showcase the promise of nanophotonic surfaces in the development of resonance-enhanced interferometric microscopies.

Optobiochemistry: Genetically Encoded Control of Protein Activity by Light

2021 ◽  
Vol 90 (1) ◽  
Author(s):  
Jihye Seong ◽  
Michael Z. Lin
Keyword(s):  
Protein Function ◽  
Living Cells ◽  
Optical Methods ◽  
Annual Review ◽  
Publication Date ◽  
Protein Activity ◽  
Spatiotemporal Resolution ◽  
Protein Functions ◽  
Protein Classes ◽  
Control Protein

Optobiochemical control of protein activities allows the investigation of protein functions in living cells with high spatiotemporal resolution. Over the last two decades, numerous natural photosensory domains have been characterized and synthetic domains engineered and assembled into photoregulatory systems to control protein function with light.Here, we review the field of optobiochemistry, categorizing photosensory domains by chromophore, describing photoregulatory systems by mechanism of action, and discussing protein classes frequently investigated using optical methods. We also present examples of how spatial or temporal control of proteins in living cells has provided new insights not possible with traditional biochemical or cell biological techniques. Expected final online publication date for the Annual Review of Biochemistry, Volume 90 is June 2021. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

scholarly journals Improving SERS Detection of Bacillus thuringiensis Using Silver Nanoparticles Reduced with Hydroxylamine and with Citrate Capped Borohydride

2011 ◽  
Vol 2011 ◽  
pp. 1-9 ◽  
Author(s):  
Hilsamar Félix-Rivera ◽  
Roxannie González ◽  
Gabriela Del Mar Rodríguez ◽  
Oliva M. Primera-Pedrozo ◽  
Carlos Ríos-Velázquez ◽  
...  
Keyword(s):  
Bacillus Thuringiensis ◽  
Surface Charge ◽  
Near Field ◽  
Medical Diagnostics ◽  
Biological Warfare Agents ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Sers Detection ◽  
Warfare Agents ◽  
Enhanced Raman Scattering

The development of techniques that could be useful in fields other than biological warfare agents countermeasures such as medical diagnostics, industrial microbiology, and environmental applications have become a very important subject of research. Raman spectroscopy can be used in near field or at long distances from the sample to obtain fingerprinting information of chemical composition of microorganisms. In this research, biochemical components of the cell wall and endospores of Bacillus thuringiensis (Bt) were identified by surface-enhanced Raman scattering (SERS) spectroscopy using silver (Ag) nanoparticles (NPs) reduced by hydroxylamine and borohydride capped with sodium citrate. Activation of “hot spots”, aggregation and surface charge modification of the NPs, was studied and optimized to obtain signal enhancements from Bt by SERS. Slight aggregation of the NPs as well as surface charge modification to a more acidic ambient was induced using small-size borohydride-reduced NPs in the form of metallic suspensions aimed at increasing the Ag NP-Bt interactions. Hydroxylamine-reduced NPs required slight aggregation and no pH modifications in order to obtain high spectral quality results in bringing out SERS signatures of Bt.

electromagnetic field at the particl e has to be computed numerically. An example of such a computation using a program based on [49] is given in Fig. 4. But not only doe s the Mie theory describe an enhancement of the laser intensity in the particles' near field, it also predicts that for certain values of the size parameter nd/X (d denoting the particle diameter, À the laser wavelength) the enhancement should be particularly efficient, resulting in a resonant intensity enhancement, the so-called "Mie-resonances". 3.2.2. Near-field induced substrate damage When inspecting contaminated samples by scanning electron microscopy (SEM) or atomic force microscopy (AFM ) after DLC using ns laser pulses, the consequences of the field enhancement process became obvious: all over the cleaned areas w e found substrate damages localized exactly at the former particle positions [35, 37-39]. These damages manifested as melting pools or even holes in the surface, typical examples can be seen in Fig. 5. The consequences for the laser cleaning process are obvious. The intensity enhancement reduces the maximum laser fluence that can be applied in the process. Usually in laser cleaning studies [19, 31 ] the laser fluence corresponding to the melting threshold of a bare surface is taken as the damage threshold fluence. Our experiments show clearly that this is an inadequate definition. Instead one must take into account the enhanced laser fluence underneath the particles, as it will be discussed in Section 4. Fro m the obtained AFM images we were able to analyse in detail the surface profile at the damaged sites. Here we found that for high field enhancement factors the silicon substrate was not only molten , but that some material was even ablated (see Sec. 4). The momentum transfer to the particles during the ablation process significantly contributes to the cleanin g process and hence local substrate ablation

2003 ◽  
pp. 327-330
Keyword(s):  
Laser Fluence ◽  
Near Field ◽  
Particle Diameter ◽  
Surface Profile ◽  
Field Enhancement ◽  
Damage Threshold ◽  
Laser Pulses ◽  
Laser Wavelength ◽  
Laser Cleaning ◽  
Intensity Enhancement

scholarly journals Plasmonic interference modulation for broadband nanofocusing

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Shaobo Li ◽  
Shuming Yang ◽  
Fei Wang ◽  
Qiang Liu ◽  
Biyao Cheng ◽  
...  
Keyword(s):  
Near Field ◽  
Three Dimensional ◽  
Field Enhancement ◽  
Incident Beam ◽  
Plasmonic Mode ◽  
Resonant Structures ◽  
Interference Modulation ◽  
Near Field Imaging ◽  
Linearly Polarized ◽  
Radially Polarized

Abstract Metallic plasmonic probes have been successfully applied in near-field imaging, nanolithography, and Raman enhanced spectroscopy because of their ability to squeeze light into nanoscale and provide significant electric field enhancement. Most of these probes rely on nanometric alignment of incident beam and resonant structures with limited spectral bandwidth. This paper proposes and experimentally demonstrates an asymmetric fiber tip for broadband interference nanofocusing within its full optical wavelengths (500–800 nm) at the nanotip with 10 nm apex. The asymmetric geometry consisting of two semicircular slits rotates plasmonic polarization and converts the linearly polarized plasmonic mode to the radially polarized plasmonic mode when the linearly polarized beam couples to the optical fiber. The three-dimensional plasmonic modulation induces circumference interference and nanofocus of surface plasmons, which is significantly different from the nanofocusing through plasmon propagation and plasmon evolution. The plasmonic interference modulation provides fundamental insights into the plasmon engineering and has important applications in plasmon nanophotonic technologies.

Sign in / Sign up

Export Citation Format

Share Document