scholarly journals A CMOS Bandgap Reference Circuit with a Temperature Coefficient Adjustment Block

2014 ◽  
Vol 9 (1) ◽  
pp. 16-24
Author(s):  
Eder Issao Ishibe ◽  
João Navarro
Keyword(s):  
Temperature Coefficient ◽  
Power Supply ◽  
Cmos Technology ◽  
Reference Voltage ◽  
Voltage Source ◽  
Bandgap Reference ◽  
Voltage Output ◽  
Current Consumption ◽  
Reference Circuit ◽  
Reference Voltage Source

A bandgap reference voltage source with a temperature coefficient adjustment block was proposed. The bandgap topology employs current summation and the circuit was designed through metaheuristic algorithms in a 0.35-mm CMOS technology. Simulations with typical parameters show that the designed circuit has temperature coefficient of 15 ppm/0C, line regulation of 263 ppm/V, and current consumption of 2.71 uA in 1.0 V power supply. An additional 3-bit temperature adjustment block allowed keeping the temperature coefficient values lower than 26.6 ppm/0C for 90% of the circuits, without interfering with the reference voltage output or line regulation values.

A novel high accuracy bandgap reference voltage source

Circuit World ◽  
2017 ◽  
Vol 43 (4) ◽  
pp. 141-144
Author(s):  
Songlin Wang ◽  
Shuang Feng ◽  
Hui Wang ◽  
Yu Yao ◽  
Jinhua Mao ◽  
...  
Keyword(s):  
Feedback Regulation ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Voltage Source ◽  
Bandgap Reference ◽  
Content Type ◽  
Circuit Structure ◽  
Reference Circuit ◽  
Ldo Regulator ◽  
Reference Voltage Source

Purpose This paper aims to design a new bandgap reference circuit with complementary metal–oxide–semiconductor (CMOS) technology. Design/methodology/approach Different from the conventional bandgap reference circuit with operational amplifiers, this design directly connects the two bases of the transistors with both the ends of the resistor. The transistor acts as an amplifier to amplify the change of voltage, which is convenient for the feedback regulation of low dropout regulator (LDO) regulator circuit, at last to realize the temperature control. In addition, introducing the depletion-type metal–oxide–semiconductor transistor and the transistor operating in the saturation region through the connection of the novel circuit structure makes a further improvement on the performance of the whole circuit. Findings This design is base on the 0.18?m process of BCD, and the new bandgap reference circuit is verified. The results show that the circuit design not only is simple and novel but also can effectively improve the performance of the circuit. Bandgap voltage reference is an important module in integrated circuits and electronic systems. To improve the stability and performance of the whole circuit, simple structure of the bandgap reference voltage source is essential for a chip. Originality/value This paper adopts a new circuit structure, which directly connects the two base voltages of the transistors with the resistor. And the transistor acts as an amplifier to amplify the change of voltage, which is convenient for the feedback regulation of LDO regulator circuit, at last to realize the temperature control.

A High-Order Curvature-Compensated Bandgap Voltage Reference for Micro-Gyroscope

2012 ◽  
Vol 503 ◽  
pp. 12-17
Author(s):  
Qiang Li ◽  
Xiao Yun Tan ◽  
Guan Shi Wang
Keyword(s):  
Power Supply ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Bandgap Reference ◽  
Voltage Reference ◽  
Temperature Dependent ◽  
Power Supply Voltage ◽  
Gyroscope System ◽  
Bandgap Voltage Reference ◽  
Reference Circuit

The reference is an important part of the micro-gyroscope system. The precision and stability of the reference directly affect the precision of the micro-gyroscope. Unlike the traditional bandgap reference circuit, a circuit using a temperature-dependent resistor ratio generated by a highly-resistive poly resistor and a diffusion resistor in CMOS technology is proposed in this paper. The complexity of the circuit is greatly reduced. Implemented with the standard 0.5μm CMOS technology and 9V power supply voltage, in the range of -40~120°C, the temperature coefficient of the proposed bandgap voltage reference can achieve to about 1.6 ppm/°C. The PSRR of the circuit is -107dB.

The Design of Bandgap Reference Based on Empyrean Aether Software

2014 ◽  
Vol 687-691 ◽  
pp. 3489-3493
Author(s):  
Wei Qu ◽  
Li Mei Hou ◽  
Xiao Xin Sun ◽  
Jing Yu Sun ◽  
Liang Yu Li
Keyword(s):  
High Performance ◽  
Supply Voltage ◽  
Design Method ◽  
Reference Voltage ◽  
Voltage Source ◽  
Reference Source ◽  
Cmos Process ◽  
Bandgap Reference ◽  
Power Supply Voltage ◽  
Reference Voltage Source

A high-performance bandgap reference voltage source design method is proposed in this paper, according to the shortcomings of traditional bandgap reference voltage source. This method combined CSMC 0.35μm CMOS process with Aether software technology, enabling to improve the bandgap reference source op amp performance and take into account accuracy and stability of the system. From the experimental results: this bandgap reference voltage source output voltage has changed about 63 mV when the temperature varied from to , and the line regulator is 0.4mV/V when the power supply voltage varied from 3.2V to 3.3V. This system has advantages of high accuracy and good stability.

A Curvature-Compensated, High Power Supply Rejection CMOS Bandgap Reference for MEMS Micro-Accelerometer

2011 ◽  
Vol 483 ◽  
pp. 481-486 ◽  
Author(s):  
Xiao Wei Liu ◽  
Bing Jun Lv ◽  
Peng Fei Wang ◽  
Liang Yin ◽  
Na Xu
Keyword(s):  
Temperature Coefficient ◽  
High Power ◽  
Power Supply ◽  
Supply Voltage ◽  
Reference Voltage ◽  
Cmos Process ◽  
Bandgap Reference ◽  
Power Supply Rejection Ratio ◽  
Compensation Technique ◽  
Supply Rejection

The reference is an important part in the accelerometer system. With the development of science and technology, the request of the performance of accelerometers is increasingly higher and the precision of reference directly affects the performance of accelerometers. Therefore, a reference voltage applicable to accelerometers is presented based on the analysis of basic principles of conventional bandgap reference (BGR) in this paper. A high-order curvature compensation technique, which uses a temperature dependent resistor ratio generated by a high poly resistor and a nwell resistor, effectively serves to reduce temperature coefficient of proposed reference voltage circuit and to a large extent improve its performance. To achieve a high power supply rejection ratio (PSRR) over a broad frequency range, a pre-regulator is introduced to remain the supply voltage of the core circuit of BGR relatively independent of the global supply voltage. The proposed circuitry is designed in standard 2.0μm CMOS process. The simulated result shows that the average temperature coefficient is less than 2ppm/°C in the temperature range from -40 to 120°C. The improvement on temperature coefficient (TC) is about 10 times reduction compared to the conventional approach. And the PSR at DC frequency and 1kHz achieves -107 and -71dB respectively at 9.0V supply voltage.

A Bandgap Reference with Temperature Coefficient of 13.2 ppm/°C

2014 ◽  
Vol 981 ◽  
pp. 66-69
Author(s):  
Ming Yuan Ren ◽  
En Ming Zhao
Keyword(s):  
Power Supply ◽  
Process Simulation ◽  
Output Voltage ◽  
Operating Temperature ◽  
Cmos Process ◽  
Bandgap Reference ◽  
Analysis Method ◽  
Operation Condition ◽  
Reference Circuit ◽  
Simulation Results

This paper presents a design and analysis method of a bandgap reference circuit. The Bandgap design is realized through the 0.18um CMOS process. Simulation results show that the bandgap circuit outputs 1.239V in the typical operation condition. The variance rate of output voltage is 0.016mV/°C? with the operating temperature varying from-60°C? to 160°C?. And it is 3.27mV/V with the power supply changes from 1.8V to 3.3V.

Sign in / Sign up

Export Citation Format

Share Document