scholarly journals Pengaruh variasi sudut terjunan terhadap unjuk kerja pompa hydram (hydraulic ram pump)

2019 ◽  
Vol 9 (1) ◽  
pp. 7
Author(s):  
R. Sutanto ◽  
K. Wardani ◽  
M. Wirawan ◽  
S. Salman
Keyword(s):  
Quantitative Data ◽  
Power Source ◽  
Graphical Form ◽  
External Energy ◽  
Weight Lift

Water is one of the factors which very important and necessary in the life of living creatures. Therefore, water must be available whenever and wherever in the quantity, timing, and sufficient quality. Hydraulic Ram Pump (Hydram) is a pump does not require external energy as the power source. The purposes of this research are understanding the influence of falling angle from the hydrant pump toward generated debit and finding the influence of the falling angle of the hydrant pump to generated efficiency. This research uses hydrant pump by the specification of tube compressor its’ diameter 3 inches and a height 60 cm. the falling angle of pump are 35°, 40°, 45°, 50° and 55°. The falling-height is 1 meter  with five variations of weight-lift 3, 3½, 4, 4½, and 5 meters. The method of analysis is conducted by analyzing data obtained during the experiment, where the  results in the form of quantitative data which is presented in type of  tables and displayed in graphical form. The results of the research shows that  the best output debit on falling 35 ° namely 0.079 L / s  with 3 meters’ water weight-lift, while the lowest output debit on falling 55 ° namely 0.010 L / s 5 meters’ water weight-lift. The best efficiency is 6.103% in the falling angle of  35 ° with 3 meters’ of water weight-lift, while the lowest efficiency is 1.239% in the falling angle of 55 ° with 5 meters’ of water weight-lift.

scholarly journals Photopatterned microswimmers with programmable motion without external stimuli

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Yeongjae Choi ◽  
Cheolheon Park ◽  
Amos C. Lee ◽  
Junghyun Bae ◽  
Hyeli Kim ◽  
...  
Keyword(s):  
Mass Production ◽  
Mechanical Energy ◽  
Marangoni Effect ◽  
Direct Conversion ◽  
Power Source ◽  
External Energy ◽  
Direction Change ◽  
External Energy Source ◽  
External Stimuli ◽  
Source Materials

AbstractWe introduce highly programmable microscale swimmers driven by the Marangoni effect (Marangoni microswimmers) that can self-propel on the surface of water. Previous studies on Marangoni swimmers have shown the advantage of self-propulsion without external energy source or mechanical systems, by taking advantage of direct conversion from power source materials to mechanical energy. However, current developments on Marangoni microswimmers have limitations in their fabrication, thereby hindering their programmability and precise mass production. By introducing a photopatterning method, we generated Marangoni microswimmers with multiple functional parts with distinct material properties in high throughput. Furthermore, various motions such as time-dependent direction change and disassembly of swimmers without external stimuli are programmed into the Marangoni microswimmers.

Rendez vous with Saturn's rings

1984 ◽  
Vol 75 ◽  
pp. 743-759 ◽  
Author(s):  
Kerry T. Nock
Keyword(s):  
Solar Energy ◽  
Electric Propulsion ◽  
Power Source ◽  
Propulsion System ◽  
Low Thrust ◽  
Ring Plane ◽  
The Earth ◽  
Total Impulse ◽  
Saturn's Rings

ABSTRACTA mission to rendezvous with the rings of Saturn is studied with regard to science rationale and instrumentation and engineering feasibility and design. Future detailedin situexploration of the rings of Saturn will require spacecraft systems with enormous propulsive capability. NASA is currently studying the critical technologies for just such a system, called Nuclear Electric Propulsion (NEP). Electric propulsion is the only technology which can effectively provide the required total impulse for this demanding mission. Furthermore, the power source must be nuclear because the solar energy reaching Saturn is only 1% of that at the Earth. An important aspect of this mission is the ability of the low thrust propulsion system to continuously boost the spacecraft above the ring plane as it spirals in toward Saturn, thus enabling scientific measurements of ring particles from only a few kilometers.

Metallurgical Effects of Grain Boundary Ledges

1977 ◽  
Vol 35 ◽  
pp. 126-129
Author(s):  
L.E. Murr
Keyword(s):  
Grain Boundary ◽  
Quantitative Data ◽  
Mechanical Treatment ◽  
Unit Length ◽  
Physical And Mechanical Properties ◽  
Direct Observations ◽  
Transmission Electron ◽  
Properties Of Materials ◽  
Thermo Mechanical Treatment ◽  
Ledge Density

Ledges in grain boundaries can be identified by their characteristic contrast features (straight, black-white lines) distinct from those of lattice dislocations, for example1,2 [see Fig. 1(a) and (b)]. Simple contrast rules as pointed out by Murr and Venkatesh2, can be established so that ledges may be recognized with come confidence, and the number of ledges per unit length of grain boundary (referred to as the ledge density, m) measured by direct observations in the transmission electron microscope. Such measurements can then give rise to quantitative data which can be used to provide evidence for the influence of ledges on the physical and mechanical properties of materials.It has been shown that ledge density can be systematically altered in some metals by thermo-mechanical treatment3,4.

Morphometric analysis of cellular interactions with the endothelium during the development of arterial lesions using Scanning Electron Microscopy and digital image analysis

1987 ◽  
Vol 45 ◽  
pp. 918-919
Author(s):  
M.E. Rosenfeld ◽  
C. Karboski ◽  
M.F. Prescott ◽  
P. Goodwin ◽  
R. Ross
Keyword(s):  
Electron Microscopy ◽  
Image Analysis ◽  
Quantitative Data ◽  
Digital Image Analysis ◽  
Lower Cost ◽  
Matched Control ◽  
Digital Analysis ◽  
Cellular Interactions ◽  
Arterial Lesions ◽  
Scanning Electron

Previous research documenting the chronology of the cellular interactions that occur on or below the surface of the endothelium during the initiation and progression of arterial lesions, primarily consisted of descriptive studies. The recent development of lower cost image analysis hardware and software has facilitated the collection of high resolution quantitative data from microscopic images. In this report we present preliminary quantitative data on the sequence of cellular interactions that occur on the endothelium during the initiation of atherosclerosis or vasculitis utilizing digital analysis of images obtained directly from the scanning electron microscope. Segments of both atherosclerotic and normal arteries were obtained from either diet-induced or endogenously (WHHL) hypercholesterolemic rabbits following 1-4 months duration of hypercholesterolemia and age matched control rabbits. Vasculitis was induced in rats following placement of an endotoxin soaked thread adjacent to the adventitial surface of arteries.

Motility of leukemic lymphocytes

1990 ◽  
Vol 48 (3) ◽  
pp. 368-369
Author(s):  
Manoj Raje ◽  
Karvita B. Ahluwalia
Keyword(s):  
Quantitative Data ◽  
Laser Doppler Velocimetry ◽  
Acute Lymphocytic Leukemia ◽  
Lymphocytic Leukemia ◽  
Cellular Space ◽  
Differentiated Cells ◽  
Poorly Differentiated ◽  
Solid Tissues ◽  
Well Differentiated ◽  
Reduced Mobility

In Acute Lymphocytic Leukemia motility of lymphocytes is associated with dissemination of malignancy and establishment of metastatic foci. Normal and leukemic lymphocytes in circulation reach solid tissues where due to in adequate perfusion some cells get trapped among tissue spaces. Although normal lymphocytes reenter into circulation leukemic lymphocytes are thought to remain entrapped owing to reduced mobility and form secondary metastasis. Cell surface, transmembrane interactions, cytoskeleton and level of cell differentiation are implicated in lymphocyte mobility. An attempt has been made to correlate ultrastructural information with quantitative data obtained by Laser Doppler Velocimetry (LDV). TEM of normal & leukemic lymphocytes revealed heterogeneity in cell populations ranging from well differentiated (Fig. 1) to poorly differentiated cells (Fig. 2). Unlike other cells, surface extensions in differentiated lymphocytes appear to originate by extrusion of large vesicles in to extra cellular space (Fig. 3). This results in persistent unevenness on lymphocyte surface which occurs due to a phenomenon different from that producing surface extensions in other cells.

Gamma-Ray Spectrometric Analysis of Some Trace Elements in the Human Articular Disc of the Mandible

1963 ◽  
Vol 03 (02) ◽  
pp. 175-182 ◽  
Author(s):  
Bo Bergman ◽  
Rune Söremark
Keyword(s):  
Trace Elements ◽  
Neutron Activation ◽  
Quantitative Data ◽  
Thermal Neutron Flux ◽  
Gamma Ray ◽  
Dry Weight ◽  
Gamma Ray Spectrometry ◽  
Spectrometric Analysis ◽  
Articular Disc ◽  
Group Separation

SummaryBy means of neutron activation and gamma-ray spectrometry the concentrations in the human mandibular articular disc of the following elements have been determined: Na, Mn, Cu, Zn, Rb, Sr, Cd, W, and Au. The discs were obtained at necropsy from seven men and nine women, ranging in age from 56 to 71 years.The activation was carried out in a thermal neutron flux of about 1.7 XlO12 neutrons × cm−2 × sec.−1 for about 20 hours. A chemical group separationwas performed before the gamma-ray spectrometry. Quantitative data based on the dry weight of the cartilage samples were obtained by comparing the photo-peak area of the identified elements with those of appropriate standards.

Microcirculation of the fingers in Raynaud’s syndrome

2005 ◽  
Vol 44 (01) ◽  
pp. 29-32 ◽  
Author(s):  
I. Garai ◽  
J. Varga ◽  
G. Szücs ◽  
Z. Galajda ◽  
C. András ◽  
...  
Keyword(s):  
Nuclear Medicine ◽  
Quantitative Data ◽  
Cost Effective ◽  
Semiquantitative Analysis ◽  
Perfusion Scintigraphy ◽  
Visual Evaluation ◽  
Raynaud’S Syndrome ◽  
Raynaud's Syndrome ◽  
Primary Form

Summary Aim: We investigated the circulatory characteristics of patients suffering of primary and secondary Raynaud’s syndrome. Patients, methods: We examined 106 patients presenting with the classical symptoms of Raynaud’s syndrom (47 primary, 59 secondary) by hand perfusion scintigraphy developed by our Department of Nuclear Medicine. After visual evaluation we analyzed the images semiquantitatively, using the finger to palm ratio. We statistically compared the patients with primary and those with secondary Raynaud’s syndrome. Results: By visual evaluation we constated regional perfusion disturbances in 42 from 59 patients with secondary Raynaud’s syndrome. However, this was observed in only 3 from 47 patients with the primary form of this disease. This difference was statistically significant (p <0.001). Semiquantitative analysis showed that the finger/palm ratios (FPR) were significantly lower (p <0.05) for the patients with primary Raynaud’s syndrome. No differences in the FPR values concerning sex or right and left side. Conclusion: The hand perfusion scintigraphy with 99mTc-DTPA is a noninvasive, cost effective diagnostic tool, which objectively reflects the global and regional microcirculatory abnormalities of the hands, and provides quantitative data for follow-up.

IMPLEMENTASI JOB ORDER COSTING METHOD DALAM PERHITUNGAN HARGA POKOK PRODUKSI MAP

2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita
Keyword(s):  
Production Process ◽  
Quantitative Data ◽  
Production Cost ◽  
Qualitative Data ◽  
Cost Data ◽  
Method Calculation ◽  
Cost Of Production ◽  
The Right ◽  
The Cost

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method

Is economic inequality a universal evil?

2019 ◽  
pp. 91-106 ◽  
Author(s):  
Rostislav I. Kapeliushnikov
Keyword(s):  
Quantitative Data ◽  
Large Scale ◽  
Economic Inequality ◽  
The State ◽  
Fair Play ◽  
Left Wing ◽  
Ordinary People ◽  
The Public ◽  
Discursive Power ◽  
A Current

Using published estimates of inequality for two countries (Russia and USA) the paper demonstrates that inequality measuring still remains in the state of “statistical cacophony”. Under this condition, it seems at least untimely to pass categorical normative judgments and offer radical political advice for governments. Moreover, the mere practice to draw normative conclusions from quantitative data is ethically invalid since ordinary people (non-intellectuals) tend to evaluate wealth and incomes as admissible or inadmissible not on the basis of their size but basing on whether they were obtained under observance or violations of the rules of “fair play”. The paper concludes that a current large-scale ideological campaign of “struggle against inequality” has been unleashed by left-wing intellectuals in order to strengthen even more their discursive power over the public.

Developing GIS portal to ensure sanitary and epidemiological surveillance of transferring radio engineering objects

2020 ◽  
Vol 99 (4) ◽  
pp. 344-350
Author(s):  
Evgeny V. Zibarev ◽  
A. S. Afanasev ◽  
O. V. Slusareva ◽  
T. I. Muragimov ◽  
V. A. Stepanets ◽  
...  
Keyword(s):  
Electromagnetic Fields ◽  
Analytical Data ◽  
Base Stations ◽  
Epidemiological Surveillance ◽  
Graphical Form ◽  
Residential Areas ◽  
Information Portal ◽  
Radiofrequency Electromagnetic Fields ◽  
Online Mode ◽  
Automated Processes

In recent years, in the Russian Federation there has been an increase in the levels of radiofrequency electromagnetic fields in residential areas, including due to an increase in the number of base stations (BS). The purpose of sanitary and epidemiological surveillance at the stages of placement and commissioning of base stations (BS) is to prevent their adverse effects on public health. The increase in the number of base stations, together with the advent of new electronic equipment and antennas, provide opportunities for improving the processes of their accounting at the stage of placement and monitoring of the levels of radiofrequency electromagnetic fields at the operation stage. This automation tool can be a geo-information portal for providing sanitary and epidemiological surveillance of cellular base stations. The prototype of the geo-information portal allows both calculating the size of sanitary protection zones (SPZ) and building restriction zones (RZ) from the BS in online mode, displaying the results of calculations in graphical form and issuing sanitary and epidemiological conclusions for the placement and operation of base stations. The geo-information portal has the ability to synchronize with the data of the radio frequency center. Federal Service for Surveillance on Consumer Rights Protection and Human Wellbeing will be able to receive up-to-date analytical data. There will be completely automated processes of collecting, processing and storing information on BS.

Sign in / Sign up

Export Citation Format

Share Document