scholarly journals Stractural Behavior of Reinforced Concrete Corbel Using High-Strength Materials under Monotonic and Repeated Loads

2019 ◽  
Vol 2 (2) ◽  
pp. p1
Author(s):  
Al-Talqany F. J. ◽  
Alhussainy A. M.
Keyword(s):  
Steel Fiber ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Ultimate Shear Strength ◽  
Variable Parameters ◽  
Repeated Load ◽  
Concrete Materials ◽  
Precast Structures ◽  
Reactive Powder ◽  
Monotonic Load

The growth of Development techniques for high strength materials and precast structures leads to increase the interesting on these technics. This study will focus on the corbels which made from high strength materials (Reactive Powder Concrete materials) which including  the testing of (15 samples) and their cost, twelve of them were testing under a vertical monotonic load, while the other sample putted under the effect of repeated load. As well as, the samples divided to various groups according to many variable parameters which are (ratio of steel fiber, (a/d) ratio, existing the secondary stirrups steel, type of loading). Thus, these parameters effected on the ultimate shear strength, first crack loading, ultimate deflection, load-deflection curves, ductility and stiffness.

scholarly journals Properties of Reactive Powder Concrete Using Local Materials and Various Curing Conditions

2019 ◽  
Vol 4 (6) ◽  
pp. 74-83 ◽  
Author(s):  
Gamal I. K. ◽  
K. M. Elsayed ◽  
Mohamed Hussein Makhlouf ◽  
M. Alaa
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Hot Water ◽  
Reactive Powder Concrete ◽  
Normal Water ◽  
Reactive Powder ◽  
Local Materials

Reactive Powder Concrete RPC is comprise of (cement, quartz powder, sand, and superplasticizer) mixture with low water/cement ratio. It has not coarse aggregates and characterized by highly dense matrix, high strength concrete, excellent durability, and economic. This study aims to investigate fresh and hardened properties of locally cast RPC with several available economical materials such as silica fume (SF), fly ash (FA), steel fiber (STF), and glass fiber (GF). Experimental investigation were performed to study the effectiveness of partial replacement of cement by SF or FA to reach ultra-high strength concrete, effect of additional materials STF or GF in order to improve the fracture properties of the RPC mixes, and influence of the treated with normal water as well as with hot water. Fifteen different RPC mixes were cast with 20, 25, 30, and 35% cement replacement by SF, 25% cement replacement by FA, and another proportions taken combination between SF and FA with percentages 15, 20, 25% FA and constant 10% SF. Varying fiber types (steel fiber or glass fiber) added to concrete by different percentages 1, 2, and 3%. Specimens were treated with normal water 25ᵒC and hot water at 60ᵒC and 90ᵒC by 2 mixes with silica fume content 25% of binder and steel fiber content 2% by total volume. Performance of the various mixes is tested by the slump flow, compressive strength, flexure strength, splitting tensile strength, and density. The production of RPC using local materials is successfully get compressive strength of 121 MPa at the age of 28 days at standard conditions and normal water curing 25°C with Silica fume content 25% of binder and steel fiber content 2% by total volume of RPC and water/binder ratio of 0.25.  The results also showed the effect of curing by hot water 60 and 90°C, it is observed that compressive strength increases proportionally with curing temperatures and a compressive strength of 149.1 MPa at 90°C for 1days was obtained.

scholarly journals Dynamic Constitutive Model for Reactive Powder Concrete with Standard Curing

2018 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Constitutive Model ◽  
Strain Rate ◽  
Steel Fiber ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Strengthening Effect ◽  
Compression Tests ◽  
Softening Effect ◽  
Impact Compression ◽  
Reactive Powder

In view of the disadvantages of steam curing of reactive powder concrete (RPC), RPC with standard curing (SCRPC) is proposed. SC-RPC is an ultra-high strength concrete material prepared with high strength cement, silica fume, and gypsum by standard curing. In this study, quasi-static and impact compression tests were performed to investigate the mechanical properties of SC-RPC. The results show that steel fiber and the strain rate significantly affect the compression performance. Nevertheless, the Holmquist–Johnson–Cook (HJC) constitutive model is mainly used to analyze the dynamic response of brittle materials, such as common concrete, under shock and impact. Therefore, based on the quasi-staticand impact compression tests and the HJC constitutive model for concrete, by analyzing the steel fiber strengthening effect under quasi-static uniaxial compression, strain rate hardening, and the damage softening effect under SHPB impact compression, the steel fiber strengthening factor Kf , dynamic increase factor DIF, and revised damage variable D are introduced, and a modified HJC constitutive model for RPC with standard curing is proposed.

scholarly journals Investigation of the Match Relation between Steel Fiber and High-Strength Concrete Matrix in Reactive Powder Concrete

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1751 ◽  
Author(s):  
Guangyao Yang ◽  
Jiangxiong Wei ◽  
Qijun Yu ◽  
Haoliang Huang ◽  
Fangxian Li
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Peak Strength ◽  
Reactive Powder Concrete ◽  
Medium Length ◽  
Reactive Powder ◽  
Concrete Matrix ◽  
Strength And Toughness

This study investigated the strength and toughness of reactive powder concrete (RPC) made with various steel fiber lengths and concrete strengths. The results indicated that among RPC samples with strength of 150 MPa, RPC reinforced with long steel fibers had the highest compressive strength, peak strength, and toughness. Among the RPC samples with strength of 270 MPa, RPC reinforced with short steel fibers had the highest compressive strength, and peak strength, while RPC reinforced with medium-length steel fibers had the highest toughness. As a result of the higher bond adhesion between fibers and ultra-high-strength RPC matrix, long steel fibers were more effective for the reinforcement of RPC with strength of 150 MPa, while short steel fibers were more effective for the reinforcement of RPC with strength of 270 MPa.

scholarly journals Shear Strength of Steel Fiber Reinforced Reactive Powder Concrete & Geopolymer Concrete – A Comparison

2021 ◽  
Author(s):  
Aravind S Kumar ◽  
Bharati Raj J ◽  
Keerthy M Simon
Keyword(s):  
Shear Strength ◽  
Steel Fiber ◽  
Load Capacity ◽  
High Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Polymer Concrete ◽  
Geopolymer Concrete ◽  
Fiber Reinforced ◽  
Reactive Powder

Reactive Powder Concrete (RPC) is an ultra-high strength concrete composite prepared by the replacement of natural aggregates with quartz powder, silica fume and steel fibers. The use of RPC yields high strength, high ductile concrete with optimized material use and contributes to economic, sustainable and ecofriendly constructions. Past research has indicated that RPC offers significant improvement in the mechanical and physical properties owing to its homogenous composition with less defects of voids and microcracks. This leads to enhancement of ultimate load capacity of RPC members and results in superior ductility, energy absorption, tensile strain-hardening behavior, crack control capability and durability. Geo-polymer concrete (GPC) is a type of concrete that is made by reacting aluminate and silicate bearing materials with a caustic activator. Usually, waste materials such as fly ash or slag from iron and metal production are used, which helps lead to a cleaner environment. This paper attempts to review the effect of steel fibers on the shear strength of steel fiber reinforced RPC and compare the results with those of geopolymer concrete.

Static Properties of Plain Reactive Powder Concrete Beams

2006 ◽  
Vol 302-303 ◽  
pp. 521-527 ◽  
Author(s):  
Ri Gao ◽  
Zhi Min Liu ◽  
Li Qian Zhang ◽  
Piet Stroeven
Keyword(s):  
Mechanical Properties ◽  
Crack Extension ◽  
Steel Fiber ◽  
Concrete Beams ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Static Properties ◽  
Simply Supported ◽  
Reactive Powder ◽  
Strength And Durability

Reactive powder concrete (RPC) is a new kind of ultra-high strength and upper ductility concrete first developed in 1990’s in France. In this paper, the RPC mixture proportion is optimized and its mechanical properties, such as compressive strength, flexural strength, elastic modulus, and its durability, are tested and discussed. Based on the optimal mixture proportion, four simply supported plain RPC beams (without reinforcement bars) are made and tested. The mechanical properties of plain RPC beams, including section deformation, load-displacement relationship, failure forms, crack distribution, crack extension, and ultimate flexural capacity, are discussed. It is concluded that RPC is an excellent material with high strength and durability. Steel fiber is important both to control the crack extension and to enhance the ductility of RPC beams.

Tests on Mechanical Properties and Anti-Explosion Performance of Steel-Fiber Reactive Powder Concrete

2011 ◽  
Vol 368-373 ◽  
pp. 436-440
Author(s):  
Chun Ming Song ◽  
Ming Yang Wang ◽  
De Rong Wang
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Shear Strength ◽  
Steel Fiber ◽  
High Strength ◽  
Reactive Powder Concrete ◽  
Compression Coefficient ◽  
Reactive Powder ◽  
Very High

In order to get mechanical properties and anti-explosion capability parameters, some RPC samples with 5% steel fiber are tested, many groups data were obtained such as compressive strength, shear strength and fracture toughness. The model tests are also carried out on RPC shelter plate under contact explosion, the most important parameter to express anti-explosion capability,i.e. compression coefficient of the material, is obtained by above experiments and theory study, the results of tests show RPC with steel fiber has very high strength and anti-explosion capability, its compressive strength and anti-explosion capability are about six and three times higher than those of C30 concrete respectively.

scholarly journals Compressive Behavior and Mechanical Characteristics and Their Application to Stress-Strain Relationship of Steel Fiber-Reinforced Reactive Powder Concrete

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Baek-Il Bae ◽  
Hyun-Ki Choi ◽  
Bong-Seop Lee ◽  
Chang-Hoon Bang
Keyword(s):  
Mechanical Properties ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Test Results ◽  
Strength Concrete ◽  
Estimation Equations ◽  
Reactive Powder

Although mechanical properties of concrete under uniaxial compression are important to design concrete structure, current design codes or other empirical equations have clear limitation on the prediction of mechanical properties. Various types of fiber-reinforced reactive powder concrete matrix were tested for making more usable and accurate estimation equations for mechanical properties for ultra high strength concrete. Investigated matrix has compressive strength ranged from 30 MPa to 200 MPa. Ultra high strength concrete was made by means of reactive powder concrete. Preventing brittle failure of this type of matrix, steel fibers were used. The volume fraction of steel fiber ranged from 0 to 2%. From the test results, steel fibers significantly increase the ductility, strength and stiffness of ultra high strength matrix. They are quantified with previously conducted researches about material properties of concrete under uniaxial loading. Applicability of estimation equations for mechanical properties of concrete was evaluated with test results of this study. From the evaluation, regression analysis was carried out, and new estimation equations were proposed. And these proposed equations were applied into stress-strain relation which was developed by previous research. Ascending part, which was affected by proposed equations of this study directly, well fitted into experimental results.

Tests on Mechanical Properties and Anti-Penetration Performance of Steel-Fiber Reactive Powder Concrete

2013 ◽  
Vol 671-674 ◽  
pp. 1761-1765
Author(s):  
Yong Liu ◽  
Chun Ming Song ◽  
Song Lin Yue
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Fracture Toughness ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Reactive Powder Concrete ◽  
Calculation Results ◽  
Reactive Powder ◽  
Penetration Tests

In order to get mechanical properties ,some RPC samples with 5% steel fiber are tested, many groups data were obtained such as compressive strength, shear strength and fracture toughness. And a group of tests on RPC with 5% steel-fiber under penetration were also conducted to validate the performance to impact. The penetration tests are carried out by the semi-AP projectiles with the diameter of 57 mm and earth penetrators with the diameter of 80 mm, and velocities of the two kinds of projectiles are 300～600 m/s and 800～900 m/s, respectively. By contrast between the experimental data and the calculation results of C30 reinforced concrete by using experiential formula under penetration, it shows that the resistance of steel-fiber RPC to penetration is 3 times as that of general C30 reinforced concrete.

scholarly journals A Study on Optimum Mixture Ratio of Reactive Powder Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Mingyang Chen ◽  
Wenzhong Zheng
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
Raw Materials ◽  
Reactive Powder Concrete ◽  
Mixture Ratio ◽  
Curing Methods ◽  
Main Components ◽  
Cement Strength ◽  
Reactive Powder ◽  
Design Factors

To optimize the main components of reactive powder concrete (RPC) for various curing methods, based on the fluidity and compressive strength, an inclusive experimental research is conducted on 58 different mixture ratios. The results indicate that owing to the increase of the cement strength, the RPC fluidity decreases and the cement strength is not proportional to the compressive strength. The addition of the fly ash and the nano-microbead is an effective way to improve the fluidity, and it is required at the low W/B ratio. However, the influence of the SF grade on the strength and fluidity is almost negligible. By considering the fluidity, strength, and economy of RPC as crucial design factors, SF90 is suggested. The contribution of the steel fiber to the compressive strength cannot be ignored. The upper envelope value of the steel fibers is required for the structure to resist appropriately against the fire. According to the test results, the mixture ratio formula is proposed through considering the characters of different compositions and curing methods. The strength coefficient k1 is introduced to verify the influence of the steel fiber content, and the parameters fb, αa, and αb in the formula are reevaluated. A reasonably good agreement between the calculated strength and those obtained from the tests is reported, except for the case of W/B = 0.16 with P.O.52.5 cement. The basic steps for preparations of different RPC strengths are given, which provide a valuable reference to choose appropriate raw materials and mixture ratio design for different strength values.

Sign in / Sign up

Export Citation Format

Share Document