METHODOLOGICAL FOUNDATIONS OF DIAGNOSTICS OF METALWORKING TECHNOLOGICAL SYSTEMS ACCORDING TO PARAMETRIC RELIABILITY OF ENSURING A GIVEN QUALITY OF THE TREATED SURFACES

2021 ◽  
Vol 2021 (11) ◽  
pp. 36-50
Author(s):  
Vladimir Fedorov ◽  
Maksim Nagorkin ◽  
Leonid Vayner
Keyword(s):  
Theoretical Models ◽  
World Market ◽  
Quality Parameters ◽  
Technological Systems ◽  
Software Analysis ◽  
Parametric Reliability ◽  
Machined Parts ◽  
Machine Parts ◽  
Further Development

The paper presents the results of research justifying the need for diagnostics of metalworking technological systems on the reliability of ensuring the quality parameters of the surfaces of machine parts during machining. The fundamentals of the methodology of its implementation have been developed. Theoretical models of forming the quality parameters of parts surfaces during machining are considered and refined. This characterizes the scientific novelty of the results obtained. Circuitries for the construction of experimental control systems when conducting bench tests of machined surfaces of parts in conditions close to operational are of practical value. Circuitries are developed and computerized systems based on them for measuring the quality parameters of machined parts surfaces, including the working area of the technological system, are implemented. Recommendations on the rational choice of technological systems and the use of simulation methods in the study of parametric reliability of technological systems are presented. Mathematical and software analysis and processing of experimental results are developed and tested. These results will serve as a foundation for further development of research in the field of parametric reliability of technological systems, improving the quality of domestic engineering products and increasing their competitiveness at the world market.

Monitoring the impact of farm practices on water quality in the Otago and Southland deer focus farms

2006 ◽  
pp. 183-188
Author(s):  
R.W. Mcdowell ◽  
N. Mcgrouther ◽  
G. Morgan ◽  
M.S. Srinivasan ◽  
D.R. Stevens ◽  
...  
Keyword(s):  
Water Quality ◽  
Management Practices ◽  
Pond Water ◽  
Quality Parameters ◽  
Environmental Objectives ◽  
Covered Area ◽  
The Impact ◽  
Further Development ◽  
Soil And Water

Research on the soil and water quality of deer farms is minimal. However, the perception is that many deer operations may be detrimental to soil and water quality. To address this problem two deer focus farms (DFF, 1 each in Otago and Southland) were established to showcase how productivity and environmental objectives can coincide. Managements implemented by the farmers included a sedimentation pond, fencing off waterways and retiring land under a QEII covenant. A detailed soil and water quality testing regime occurred for each farm: data were collected at the Southland DFF for three tributaries (one fenced off, one partially fenced and one unfenced) which fed into a stream and through a tussock covered area retired from grazing. Water quality in the unfenced and partially fenced tributaries was poor with no water quality parameters meeting ANZECC guidelines, whereas water quality in the fenced-off and planted tributary was better. Water exiting the retired area met ANZECC guidelines. Although water quality on parts of both deer farms did not meet ANZECC guidelines, when management practices such as fencing off and the creation of a pond were used water quality improved. More importantly, an area retired from grazing and further development on the Southland DFF showed that water quality could be significantly improved and could be better than that entering the farm. Keywords: fencing-off, QEII covenant, sedimentation pond, water quality

Influence of the oil flax eco-brand on the development of safe production

2020 ◽  
Vol 23 (12) ◽  
pp. 65-73
Author(s):  
Yuri Berezovsky ◽  
Tetiana Kuzmina ◽  
Tatyana Mazievich
Keyword(s):  
Technology Development ◽  
Method Comparison ◽  
World Market ◽  
Highly Qualified ◽  
Light Industry ◽  
Goods Market ◽  
Technological Developments ◽  
Effective Development ◽  
Further Development

In modern competitive environment, eco-branding constitutes one of the main prerequisites for the effective development of the country's economy. In an unstable economic situation, the reformatting of Ukrainian society is too inert, while the problems are growing rapidly, which is undoubtedly exploited by dishonest players in the consumer goods market. This study considers the lines of development of Ukrainian and world commodity markets, pointing to the need to develop the market of environmentally friendly products based on oil flax, improving the quality of flax-containing products due to the use of advanced technologies and innovative equipment. The research methodology included the monographic method, comparison, analysis, mathematical planning, and graphic method. It is determined that the main prerequisite for sustainable development of the country in the context of economic globalisation, limited resources, and technology development is the use of eco-branding. To increase the efficiency of processing of fibrous material, a method of processing oilseed flax has been developed, which allows expanding the range of processing products of oilseed flax and to create waste-free technology. A method for obtaining the same type of fibre from bast-fibre crops has been developed, which makes it possible to process oil flax stalks. Prospects for the use of the presented technical and technological developments can contribute to the modernisation of the light industry, its further development, expansion of the Ukrainian market, increase jobs and attract highly qualified specialists in the field, increase the competitiveness of Ukrainian products on the world market

scholarly journals Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6332
Author(s):  
Oksana P. Gaponova ◽  
Bogdan Antoszewski ◽  
Viacheslav B. Tarelnyk ◽  
Piotr Kurp ◽  
Oleksandr M. Myslyvchenko ◽  
...  
Keyword(s):  
Quality Parameters ◽  
Substrate Material ◽  
Metallographic Analysis ◽  
Electrospark Alloying ◽  
X Ray Diffraction ◽  
Surface Layers ◽  
Molybdenum Electrode ◽  
Tribological Coatings ◽  
Machine Parts

The authors of this paper have attempted to improve the quality of surface layers applied to steel elements of machine parts constituting friction couples. The main goal of the research was to investigate an electrospark alloying method process for obtaining abrasion-resistant tribological coatings containing molybdenum disulfide on a steel surface. A substance in the form of sulfur ointment with a sulfur content of 33.3% was applied on the surfaces of C22 and C40 steel specimens. In order to determine the influence of the energy parameters of ESA equipment on the quality parameters of coatings, the ESA process was carried out using a molybdenum electrode with discharge energies Wp = 0.13; Wp = 0.55; Wp = 3.4 J. The following tests were carried out on specimens with such coatings: metallographic analysis, microhardness tests, surface roughness, and local X-ray diffraction microanalysis. The experiments revealed that sulfomolybdenum coatings consist of four zones with different mechanical properties. Depending on the discharge energy and the substrate material, the hardness of these zones varies from approx. 1100 to over 10,000 MPa. Differences in the distribution of, among others, sulfur and molybdenum in the obtained coatings, as well as differences in the microstructure of the observed coatings, were observed.

Machining and its Influence to Surface Quality of Machine Parts

2013 ◽  
Vol 581 ◽  
pp. 354-359 ◽  
Author(s):  
Frantisek Holesovsky ◽  
Martin Novák ◽  
Michal Lattner ◽  
Tomas Vyslouzil
Keyword(s):  
Surface Finishing ◽  
Machined Surface ◽  
Interesting Part ◽  
New Findings ◽  
Machine Parts ◽  
Further Development ◽  
Ambient Surface ◽  
Ring Position ◽  
Lock Ring

A number of machine parts are provided with design notches for the mounting of lock ring, position of bearing, and cross over sub of diameters etc. These elements significantly affect the durability of machines parts and their influence is inherently implemented into their design. The question is machining itself, particularly ambient surface finishing and intrinsic notch element. The changes and behaviour of machined surface form also very interesting part of paper and particularly under load. A number of new findings concerning the influence of machining on durability of machine parts both under dynamic load and the cyclic tensile, bending at rotation and torque were discovered in this research. The findings are important for further development, mainly related to car and aviation industries.

Cognitive Health Counseling 40+

2013 ◽  
Vol 21 (1) ◽  
pp. 24-33 ◽  
Author(s):  
Anne Eschen ◽  
Franzisca Zehnder ◽  
Mike Martin
Keyword(s):  
Outcome Variable ◽  
Pilot Phase ◽  
Subjective Memory ◽  
Cognitive Health ◽  
Health Counseling ◽  
Agents Of Change ◽  
Main Outcome Variable ◽  
Further Development

This article introduces Cognitive Health Counseling 40+ (CH.CO40+), an individualized intervention that is conceptually based on the orchestration model of quality-of-life management ( Martin & Kliegel, 2010 ) and aims at improving satisfaction with cognitive health in adults aged 40 years and older. We describe the theoretically deduced characteristics of CH.CO40+, its target group, its multifactorial nature, its individualization, the application of subjective and objective measures, the role of participants as agents of change, and the rationale for choosing participants’ satisfaction with their cognitive health as main outcome variable. A pilot phase with 15 middle-aged and six older adults suggests that CH.CO40+ attracts, and may be particularly suitable for, subjective memory complainers. Implications of the pilot data for the further development of the intervention are discussed.

Quality of ram spermatozoa separated with modified swim up method

2018 ◽  
Vol 33 (2) ◽  
pp. 62-70 ◽  
Author(s):  
A Hossain ◽  
MM Islam ◽  
F Naznin ◽  
RN Ferdousi ◽  
FY Bari ◽  
...  
Keyword(s):  
Semen Quality ◽  
Membrane Integrity ◽  
Quality Parameters ◽  
Fluid Medium ◽  
Normal Morphology ◽  
The Mean ◽  
Mass Activity ◽  
Fresh Semen ◽  
Artificial Vagina

Semen was collected from four rams, using artificial vagina and viability%, motility% and plasma membrane integrity% were measured. Fresh ejaculates (n = 32) were separated by modified swim-up separation using modified human tubal fluid medium. Four fractions of supernatant were collected at 15-minute intervals. The mean volume, mass activity, concentration, motility%, viability%, normal morphology and membrane integrity% (HOST +ve) of fresh semen were 1.0 ± 0.14, 4.1 ± 0.1 × 109 spermatozoa/ml, 85.0 ± 1.3, 89.4 ± 1.0, 85.5 ± 0.7, 84.7 ± 0.5 respectively. There was no significant (P>0.05) difference in fresh semen quality parameters between rams. The motility%, viability% and HOST +ve % of first, second, third and fourth fractions were 53.4 ± 0.5, 68.2 ± 0.3, 74.8 ± 0.3 and 65.5 ± 0.4; 55.5 ± 0.4, 66.2 ± 0.4, 74.5 ± 0.3 and 73.6 ± 0.3 and 66.7 ± 0.5, 66.8 ± 0.5, 65.2 ± 0.4 and 74.7 ± 0.5 respectively. The motility%, viability% and membrane integrity% of separated semen samples differed significantly (P<0.05) between four fractions. The mean motility% and viability% were significantly higher (P<0.05) in third fraction (74.8 ± 0.3%), whereas the mean HOST +ve% was significantly higher (P<0.05) in fourth fraction (74.7 ± 0.5). All quality parameters of separated spermatozoa were significantly (P<0.05) lower than that of fresh semen. The pregnancy rates were higher with fresh semen (71%) in comparison to that of separated sample (57%).Bangl. vet. 2016. Vol. 33, No. 2, 62-70

Yield and Seed quality of barley (Hordeum vulgare L.) as affected by variety, nitrogen level and harvesting time

2014 ◽  
Vol 2 (2) ◽  
pp. 93-100
Author(s):  
Shahnaj Yesmina ◽  
Moushumi Akhtarb ◽  
Belal Hossain
Keyword(s):  
Grain Yield ◽  
Seed Weight ◽  
Seed Quality ◽  
Quality Parameters ◽  
Nitrogen Level ◽  
Yield Attributes ◽  
Harvesting Time ◽  
Nitrogen Levels ◽  
Vigour Index

The experiment was conducted to find out the effect of variety, nitrogen level and harvesting time on yield and seed quality of barley. The treatments used in the experiment consisted of two varieties viz. BARI Barley 4 and BARI Barley 5, three harvesting time viz. 35, 40 and 45 Days after Anthesis (DAA) and nitrogen levels viz. 0, 70, 85 and 100 kg N ha-1 . The experiment was laid out in a spilt- spilt-plot design with three replications assigning the variety to the main plot, harvesting time to the sub-plots and nitrogen level to the sub-sub plots. Variety had significant effects on the all yield attributes except fertile seeds spike-1 . Seed quality parameters viz. normal seeds spike-1 , deformed seeds spike-1 , germination (%) and vigour index were statistically significant. The variety BARI Barley 5 produced higher grain yield and seed quality than BARI Barley 4. Grain yield from BARI Barley 5 and BARI Barley 4 were 4.59 t ha-1 and 4.24 t ha-1 , respectively. Significantly, the highest 1000-seed weight (46.90 g) was produced by BARI Barley 5 than (37.90 g) BARI Barley 4. The result revealed that harvesting time had significant effect on yield and yield attributes and seed quality parameters. Seed yield was highest (4.65 t ha-1 ) when the crop harvested at 40 DAA and it was increased linearly from 35 DAA. Maximum quality seed and 1000-seed weight (43.20 g) was obtained when the crop harvested at 40 DAA. All the yields, yield attributes and seed quality parameters were significantly influenced by nitrogen levels. The highest grain yield (5.14 t ha-1 ) was obtained when BARI Barley 5 variety was fertilized by 100 kg N ha-1 and the lowest (3.14 t ha-1 ) was obtained from control treatments. Normal seeds spike-1 , vigour index, germination (%) were better at 85 kg N ha-1 in variety of BARI Barley 5 than BARI Barley 4. So it can be concluded that BARI Barley 5 showed better result when fertilized with 100 kg N ha-1 and harvested at 40 DAA for getting maximum yield and 85 kg N ha-1 and harvested at 40 DAA for getting better quality seed.

Questionnaire validation for the evaluation of patients satisfaction with chronic generalized periodontitis physiotherapeutic treatment

2019 ◽  
pp. 32-37
Author(s):  
G.B. Lyubomirsky ◽  
T.L. Redinova
Keyword(s):  
Clinical Characteristics ◽  
Quality Parameters ◽  
Questionnaire Validation ◽  
Dental Procedure ◽  
Dental Services ◽  
Patients Satisfaction ◽  
Literary Sources

This article assesses the reliability, constructive validity and reproducibility of a special questionnaire for determining the quality parameters of rendering physiotherapeutic care to patients with chronic generalized periodontitis. The analysis of literary sources showed that there are studies of quality of dental services, however, we have not met with research into the quality and comfort of physiotherapy procedures for periodontal patients. At the same time, the importance of this issue is obvious and requires study and analysis. Without making judgments about the quality of the service, a full-fledged medical dental procedure can not take place. The assortment of physical devices and methods grows annually, their use in the periodontoloical treatment is not always sufficiently justified, the effectiveness is not always confimed therefore it is important to pay attention not only to the marketing efforts directed by the clinics for comfort, but also to analyze the ideas about the quality of the clinical characteristics of physiotherapeutic procedures.

Considerations of the technological quality assessment of sugarbeet

2011 ◽  
pp. 85-89 ◽  
Author(s):  
Giorgio Pezzi
Keyword(s):  
Quality Parameters ◽  
Northern Italy ◽  
Glucose Content ◽  
Long Term Storage ◽  
Interesting Correlation ◽  
Technological Quality ◽  
Thick Juice

No real improvement in the technological quality of beet has been recorded over the last 15 years in Northern Italy. Among the possible explanations for the quality stagnation is that the traditional formulae cannot correctly differentiate between sugarbeet varieties which produce thick juice of very high purity. This seems to be connected with the role of potassium. The use of a standard purification procedure gives reliable and accurate data which is immediately comparable with the factory data. Research projects on medium/long term storage are currently being performed by Co.Pro.B., Italy, in cooperation with Syngenta and Beta. Up to now the results have shown that storage of sugarbeet in autumn time in northern Italy is possible provided that suitable varieties and proper handling of the roots are employed. Results obtained in the storage trials are reported. Correlations have been found between quality parameters (purity, color and lime salts) of the purified juice with the glucose content of the raw juice. An interesting correlation is reported between purified juice purity and raw juice purity.

Sign in / Sign up

Export Citation Format

Share Document