scholarly journals Effectiveness of Selected Entomopathogenic Fungi in Packed Rice Grain at Room Temperature against Corcyra cephalonica Stainton

Author(s):  
Yusof Bin Ibrahim ◽  
Hendrawan Samodra
2017 ◽  
Vol 23 (3) ◽  
pp. 183 ◽  
Author(s):  
Hendrawan Samodra ◽  
Yusof Bin Ibrahim

Eight isolates of entomopathogenic fungi were evaluated as dried conidia against the rice moth,  Corcyra cephalonica. In bioassays two isolates of Beauveria bassiana (BbGc and BbPs) and one isolate of Metarhizium anisopliae (MaPs) consistently gave high mortality to C. cephalonica larvae. Formulations in either kaolin, talc or tapioca flour (20 % w/w a.i.) thoroughly mixed with long grain rice in plastic cups (8 cm diameter by 5 cm) gave complete larval mortality by the 12th day of treatment. However, in general those formulated in kaolin and talc were more efficacious and faster to kill compared to those formulated in tapioca flour or the unformulated control. Even at the lowest rate of 0.05 g BbGc in kaolin provided 100% mortality 7 days after introduction compared with other dust formulations. Isolate BbGc in kaolin and talc administered at 0.4 g a.i. in 200 g rice packed in plastic kept at room temperature provided protection against the rice moth up to 4 months of storage. Larval mortality in excess of 90% was obtained 15 days after introduction. Formulations of MaPs was effective only within the first month of storage beyond which infectivity rapidly declined.


2008 ◽  
Vol 71 (12) ◽  
pp. 2453-2459 ◽  
Author(s):  
JOHN TANG YEW HUAT ◽  
YAP KOK LEONG ◽  
HING HIANG LIAN

This study examined whether the survival of Vibrio cholerae O1 on contaminated cooked rice was influenced by the type of rice. Vibrios survived unchanged on clumps of glutinous white rice (wet, grains adhered) held at room temperature for 24 h. On nonglutinous white rice (slightly moist, grains separate), 30% viable vibrios remained at 24 h. On nonglutinous brown rice (moist, separate, covered with a mucus-like substance), the number of vibrios increased 2.7-fold at 24 h. Survival rates of vibrios on the surfaces of a row of five cooked rice grains after 2 h of exposure at room temperature were 86, 29, 12, and 4% for glutinous rice, white rice, and the endosperm and pericarp of brown rice, respectively. (Each boiled brown rice grain surface was partly pericarp and partly endosperm, which became exposed by a rupture of the pericarp.) Covering each inoculated grain with a similar cooked rice grain surface increased the corresponding figures to 93, 99, 60, and 94%. Scanning electron microscopy revealed that each type of cooked grain surface possessed a distinct microtopography. For example, the surfaces of glutinous rice grains consisted of separated overlapping strips with many holes, while the pericarps of brown rice were flat interspersed with small pits. In conclusion, each type of boiled rice produced a distinct survival pattern of V. cholerae O1 caused by both the distinct gross features and the fine surface characteristics of the rice. The significance of this finding is that the type of rice consumed can be a factor in cholera transmission by contaminated rice.


2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Yuyun Fitriana ◽  
Radix Suharjo ◽  
I. Gede Swibawa ◽  
Bihikmi Semenguk ◽  
Lita Theresia Pasaribu ◽  
...  

Abstract Background Spodoptera litura Fabricius (Lepidoptera: Noctuidae) is an important pest causing severe damage to many cultivating plants such as corn worldwide, including Indonesia. This study was performed to obtain and identify entomopathogenic fungi (EPF) of S. litura collected from corn fields in 4 corn producing regions of Lampung, Indonesia, as well as to investigate the damage caused by this pest on corn in Lampung Province. Results Three corn fields in each region were selected for collecting soil samples. Soil samples were collected from 5 corn plant rhizospheres, at each field in six months of survey. Ten larvae of Tenebrio molitor Linnaeus (Coleoptera: Tenebrionidae) were laid on each soil sample as a bait, covered with a filter paper and incubated at room temperature. The emerging fungi from T. molitor cadaver were transferred onto Potato Dextrose Agar (PDA) medium and incubated for 7 days at room temperature. Pathogenicity test was determined against 3rd instar of S. litura larvae. Identification was performed based on the sequence of Internal Transcribed Spacer (ITS) Region. Observations on the corn damage caused by S. litura were conducted at all corn producing areas in Lampung. Twelve fungal isolates were obtained causing 0–75% of mortality of S. litura. Four fungal isolates (NKPT, SKHJ, SDHJ and RAHJ), which caused mortality more than 20%, were further identified. One isolate (NKPT) was confirmed as Beauveria bassiana and the other 3 isolates (SKHJ, SDHJ and RAHJ) were Aspergillus oryzae. S. litura generally caused slight damages to the corn which was found in every observation year performed during 2010–2019. Medium plant damage was observed in 2010–2012 and 2018–2019, severe damage was found in 2011 and crop failure was recorded in 2018. Conclusions Aspergillus oryzae and B. bassiana were the EPF recorded infecting S. litura in corn in Lampung Province. This was the first report on the isolates of A. oryzae as EPF of S. litura in Indonesia. Slight damages with S. litura were always recorded in every observation year but not for those of medium and severe damages and crop failure.


2017 ◽  
Vol 08 (05) ◽  
pp. 17179-17182
Author(s):  
Maya G Pillai ◽  
◽  
Susha Dayanandan ◽  
Beena Joy ◽  
◽  
...  

Author(s):  
J. E. Doherty ◽  
A. F. Giamei ◽  
B. H. Kear ◽  
C. W. Steinke

Recently we have been investigating a class of nickel-base superalloys which possess substantial room temperature ductility. This improvement in ductility is directly related to improvements in grain boundary strength due to increased boundary cohesion through control of detrimental impurities and improved boundary shear strength by controlled grain boundary micros true tures.For these investigations an experimental nickel-base superalloy was doped with different levels of sulphur impurity. The micros tructure after a heat treatment of 1360°C for 2 hr, 1200°C for 16 hr consists of coherent precipitates of γ’ Ni3(Al,X) in a nickel solid solution matrix.


Author(s):  
J. N. Turner ◽  
D. N. Collins

A fire involving an electric service transformer and its cooling fluid, a mixture of PCBs and chlorinated benzenes, contaminated an office building with a fine soot. Chemical analysis showed PCDDs and PCDFs including the highly toxic tetra isomers. Guinea pigs were chosen as an experimental animal to test the soot's toxicity because of their sensitivity to these compounds, and the liver was examined because it is a target organ. The soot was suspended in 0.75% methyl cellulose and administered in a single dose by gavage at levels of 1,10,100, and 500mgm soot/kgm body weight. Each dose group was composed of 6 males and 6 females. Control groups included 12 (6 male, 6 female) animals fed activated carbon in methyl cellulose, 6 males fed methyl cellulose, and 16 males and 10 females untreated. The guinea pigs were sacrificed at 42 days by suffocation in CO2. Liver samples were immediately immersed and minced in 2% gluteraldehyde in cacadylate buffer at pH 7.4 and 4°C. After overnight fixation, samples were postfixed in 1% OsO4 in cacodylate for 1 hr at room temperature, embedded in epon, sectioned and stained with uranyl acetate and lead citrate.


Author(s):  
Joseph J. Comer

Domains visible by transmission electron microscopy, believed to be Dauphiné inversion twins, were found in some specimens of synthetic quartz heated to 680°C and cooled to room temperature. With the electron beam close to parallel to the [0001] direction the domain boundaries appeared as straight lines normal to <100> and <410> or <510> directions. In the selected area diffraction mode, a shift of the Kikuchi lines was observed when the electron beam was made to traverse the specimen across a boundary. This shift indicates a change in orientation which accounts for the visibility of the domain by diffraction contrast when the specimen is tilted. Upon exposure to a 100 KV electron beam with a flux of 5x 1018 electrons/cm2sec the boundaries are rapidly decorated by radiation damage centers appearing as black spots. Similar crystallographio boundaries were sometimes found in unannealed (0001) quartz damaged by electrons.


Author(s):  
Louis T. Germinario

A liquid nitrogen stage has been developed for the JEOL JEM-100B electron microscope equipped with a scanning attachment. The design is a modification of the standard JEM-100B SEM specimen holder with specimen cooling to any temperatures In the range ~ 55°K to room temperature. Since the specimen plane is maintained at the ‘high resolution’ focal position of the objective lens and ‘bumping’ and thermal drift la minimized by supercooling the liquid nitrogen, the high resolution capability of the microscope is maintained (Fig.4).


Author(s):  
K. A. Fisher ◽  
M. G. L. Gustafsson ◽  
M. B. Shattuck ◽  
J. Clarke

The atomic force microscope (AFM) is capable of imaging electrically conductive and non-conductive surfaces at atomic resolution. When used to image biological samples, however, lateral resolution is often limited to nanometer levels, due primarily to AFM tip/sample interactions. Several approaches to immobilize and stabilize soft or flexible molecules for AFM have been examined, notably, tethering coating, and freezing. Although each approach has its advantages and disadvantages, rapid freezing techniques have the special advantage of avoiding chemical perturbation, and minimizing physical disruption of the sample. Scanning with an AFM at cryogenic temperatures has the potential to image frozen biomolecules at high resolution. We have constructed a force microscope capable of operating immersed in liquid n-pentane and have tested its performance at room temperature with carbon and metal-coated samples, and at 143° K with uncoated ferritin and purple membrane (PM).


Author(s):  
A. C. Faberge

Benzylamine tartrate (m.p. 63°C) seems to be a better and more convenient substrate for making carbon films than any of those previously proposed. Using it in the manner described, it is easy consistently to make batches of specimen grids as open as 200 mesh with no broken squares, and without individual handling of the grids. Benzylamine tartrate (hereafter called B.T.) is a viscous liquid when molten, which sets to a glass. Unlike polymeric substrates it does not swell before dissolving; such swelling of the substrate seems to be a principal cause of breakage of carbon film. Mass spectroscopic examination indicates a vapor pressure less than 10−9 Torr at room temperature.


Sign in / Sign up

Export Citation Format

Share Document