Laser physical vapor deposition (LPVD) has been used to grow titanium nitride films on hydrogen-terminated silicon(100) substrates at deposition temperatures ranging from room temperature to 600 °C. A pulsed KrF excimer laser (λ = 248 nm, τ = 25 ns) was used with the deposition chamber maintained at a base pressure of 10−7 Torr prior to deposition. Different properties of the films were investigated by x-ray diffraction, Auger electron spectroscopy, Raman spectroscopy, optical, scanning, and high resolution transmission electron microscopy, and measurement of electrical resistivity. When the substrate temperature was low (at and below 500 °C), oxygen atoms from the residual gases were incorporated in the films. The microstructures and resistivities of TiN films were found to be strongly dependent on the temperature of the silicon substrates. The TiN films deposited at 600 °C were oxygen-free, as observed from Auger analysis, and the room temperature resistivity was found to be 14–15 μΩ-cm. Raman spectroscopy of the films showed that the nitrogen-related optical phonon peak increased with deposition temperature in comparison with the titanium-related acoustic peak. Transmission electron microscopy and x-ray diffraction analyses showed that the films were polycrystalline at low temperature with grain size ranging from 300–600 Å, depending on the temperature of the substrate. At 600 °C, the films were found to be single crystals with occasional presence of dislocation loops. The spacing of Moiré fringes in TiN/Si samples deposited at 600 °C established the nearly periodic elastic strain field extending into the TiN and Si at the interface. Although there exists a large misfit between TiN and Si (24.6%), the epitaxial growth of TiN films on Si(100) substrates was explained by means of domain-matched epitaxy with a 4-to-3 match in unit cells for TiN/Si structure, giving rise to a residual lattice misfit of only 4%.
