scholarly journals Influence of rutin-ammonium complex on the physiological condition of pine seedlings

2021 ◽  
Vol 12 (4) ◽  
Author(s):  
A. P. Pinchuk ◽  
I. V. Ivanyuk ◽  
M. O. Shevchuk ◽  
M. Yu. Dubchak ◽  
A. F. Likhanov
Keyword(s):  
Seed Germination ◽  
High Performance ◽  
Total Concentration ◽  
Polar Compounds ◽  
Ammonia Solution ◽  
High Biological Activity ◽  
Germination Energy ◽  
Tissue Extracts ◽  
Pine Seedlings ◽  
Wide Range

In the plant body, phenolic compounds nonspecifically affect the processes of morphogenesis and perform a wide range of regulatory and protective functions. Of particular interest are the processes involved in the complexation of flavonoids as a result of their interaction with ammonium forms of nitrogen. Polar compounds, which are formed in tissues as a result of chemical transformation, are quite mobile in soil solutions and show high biological activity. The properties of phenol-ammonium complexes are of considerable interest in terms of morphogenesis, physiology of stability, as well as in the system of interaction of plants with soil microorganisms. Studies of the effect of phenol-ammonium complex were performed on seeds and seedlings of Scots pine. Quantitative indicators of germination energy and germination were determined by seed germination. Biochemical profiling of seedling tissue extracts was performed by high-performance thin layer chromatography. It has been experimentally confirmed that rutin (quercetin-3-O-rutinoside) after interaction with 10% aqueous ammonia solution forms a complex of substances, among which the chromatography revealed polar products that potentially affect the regulation of growth. At a total concentration of 15 mg/l, these substances significantly increased germination energy and seed germination. In pine seedlings, they stimulated the growth of roots and shoots. The effect of the complex of organic compounds on seedlings depended on the concentration, duration of seed treatment and had a prolonged effect. The obtained phenol-ammonium complex at a concentration of 10-15 mg/l contributed to an increase in the amount of chlorophylls, carotenoids in the tissues of seedlings, and at 20-40 mg/l increased the content of phenolic synthesis products.

scholarly journals Sesquiterpene Lactones and Bitterness in Korean Leaf Lettuce Cultivars

HortScience ◽  
2009 ◽  
Vol 44 (2) ◽  
pp. 246-249 ◽  
Author(s):  
Myeong Whoon Seo ◽  
Dong Sik Yang ◽  
Stanley J. Kays ◽  
Gung Pyo Lee ◽  
Kuen Woo Park
Keyword(s):  
Liquid Chromatography ◽  
High Performance ◽  
Sesquiterpene Lactones ◽  
Total Concentration ◽  
Relative Proportion ◽  
Dry Weight ◽  
Proton Nuclear Magnetic Resonance ◽  
Flower Stalk ◽  
Wide Range ◽  
Leaf Lettuce

The principal bitter sesquiterpene lactones (BSLs; latucin, 8-deoxylactucin, and lactucopicrin) in six red and four green-pigmented leaf lettuce (Lactuca sativa L. var. crispa L.) cultivars were identified and quantified using high-performance liquid chromatography, proton nuclear magnetic resonance, and liquid chromatography–mass spectrometry and the contribution of each to the overall bitterness was determined. The concentration of each BSL and the total varied significantly among cultivars and there were significant differences resulting from leaf color (green versus red) and morphology (cut versus curled leaves) with red and curled leaf cultivars having higher BSL concentrations. The concentrations of lactucin, 8-deoxylactucin, and lactucopicrin ranged from 2.9 to 17.2, 2.8 to 17.1, and 8.8 to 36.1 μg·g−1 dry weight, respectively, with the total concentration ranging from 14.6 to 67.7 μg·g−1. Bitterness of the cultivars was assessed using a bitter activity value calculated using the concentration and bitterness threshold value for each BSL. Lactucopicrin was the primary contributor to bitterness as a result of its concentration and lower bitterness threshold; its relative proportion of the total bitterness activity value across all cultivars was over 72%. The concentration of individual BSLs differed with leaf location on the plant (i.e., basal, midstalk, and flower stalk). The concentrations in lactucin, 8-deoxylactucin, and lactucopicrin in flower stalk leaves were significantly higher (i.e., 2.9, 12.4, and 5.4 times, respectively) than in basal leaves, with the concentrations increasing acropetally. Genetic differences among cultivars and with leaf location on the plant contribute to the wide range in bitterness in lettuce.

scholarly journals Effects of protatranes on the germination of wheat and triticale seeds after their long-term storage

2021 ◽  
Vol 11 (2) ◽  
pp. 272-280
Author(s):  
G. I. Filipenko ◽  
S. N. Adamovich ◽  
E. N. Oborina ◽  
I. B. Rozentsveig ◽  
G. F. Safina
Keyword(s):  
Seed Germination ◽  
Plant Genetic Resources ◽  
Accelerated Aging ◽  
Germination Energy ◽  
Long Term Storage ◽  
High Germination ◽  
Wide Range ◽  
Soft Winter Wheat ◽  
Term Storage

The article studies the chemical compounds of a number of protatranes as biostimulants of the germination of wheat and triticale seeds after their long-term storage. The relevance of the study is determined by the need to restore the germination of unique samples of grain crops from the collection of the N.I. Vavilov All-Russian Institute of Plant Genetic Resources (VIR) (Saint Petersburg). The research objects were the seeds of different years of reproduction with various levels of original germination, as well as those with an initially high germination and subjected to accelerated aging. The experiments were conducted in the presence of the following physiologically active non-toxic protatranes 2-Me-C6H4OCH2COO- • HN+(CH2CH2OH)3 (1) and 4-Cl-C6H4SCH2COO-•HN+(CH2CH2OH)3 (2) across a wide range of concentrations (1•10-2 – 1•10-9M). At the first stage, the effect of protatrane 1 on the germination of soft spring wheat was investigated. It was observed that, under the influence of protatrane 1 at concentrations from 10-4 to 10-9 M, the seed germination and the germination energy increased by 8.7-20.0% and 4.7-8.0%, respectively. The use of protatrane 1 at higher concentrations (10-2M) resulted in a decrease in germination. Subsequently, experiments were carried out on 3 samples of soft winter wheat seeds stored for 52 years and having the germination of 19-26%. The 20-hour exposure of seeds to water solutions of protatrane 1 at concentrations of 5 • 10-7-10-9 M increased their germination by 3.7-10.0%. The best stimulating effect was achieved at a concentration of 5 • 10-7 M. At the next stage, the seeds with a high original germination (86-96%) and subjected to accelerated aging were investigated. The treatment of such samples with protatrane 1 at concentrations of 10-6 and 10-4 M turned out to be less effective: the germination and its energy either remained the same or increased insignificantly (by 3.5% and 7.5%, respectively). The treatment of triticale seeds with pro-tatranes 1 and 2 at a concentration of 5 • 10-7 M was carried out in a similar manner. It was shown that the action of protatranes 1 and 2 led to an increase in the germination by 3-7% and a significant increase in the germination energy by 7-45%. By further optimising the production process and selecting the most active protatranes, the described approach can provide for a significant recovery of seed germination.

Validated Stability Indicating HPTLC Method for the Estimation of Amoxapine in Different Stress Conditions

2019 ◽  
Vol 15 (3) ◽  
pp. 273-279
Author(s):  
Shweta G. Rangari ◽  
Nishikant A. Raut ◽  
Pradip W. Dhore
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Analysis Data ◽  
Peak Height ◽  
Good Resolution ◽  
Stability Indicating ◽  
Limit Of Quantitation ◽  
Wide Range ◽  
Hptlc Method

Background:The unstable and/or toxic degradation products may form due to degradation of drug which results into loss of therapeutic activity and lead to life threatening condition. Hence, it is important to establish the stability characteristics of drug in various conditions such as in temperature, light, oxidising agent and susceptibility across a wide range of pH values.Introduction:The aim of the proposed study was to develop simple, sensitive and economic stability indicating high performance thin layer chromatography (HPTLC) method for the quantification of Amoxapine in the presence of degradation products.Methods:Amoxapine and its degraded products were separated on precoated silica gel 60F254 TLC plates by using mobile phase comprising of methanol: toluene: ammonium acetate (6:3:1, v/v/v). The densitometric evaluation was carried out at 320 nm in reflectance/absorbance mode. The degradation products obtained as per ICH guidelines under acidic, basic and oxidative conditions have different Rf values 0.12, 0.26 and 0.6 indicating good resolution from each other and pure drug with Rf: 0.47. Amoxapine was found to be stable under neutral, thermal and photo conditions.Results:The method was validated as per ICH Q2 (R1) guidelines in terms of accuracy, precision, ruggedness, robustness and linearity. A good linear relationship between concentration and response (peak area and peak height) over the range of 80 ng/spot to 720 ng/spot was observed from regression analysis data showing correlation coefficient 0.991 and 0.994 for area and height, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) for area were found to be 1.176 ng/mL and 3.565 ng/mL, whereas for height, 50.063 ng/mL and 151.707 ng/mL respectively.Conclusion:The statistical analysis confirmed the accuracy, precision and selectivity of the proposed method which can be effectively used for the analysis of amoxapine in the presence of degradation products.

Phytochemical, Analytical and Medicinal Studies of Holoptelea integrifolia Roxb. Planch - A Review

2019 ◽  
Vol 5 (4) ◽  
pp. 270-277 ◽  
Author(s):  
Vijay Kumar ◽  
Simranjeet Singh ◽  
Ragini Bhadouria ◽  
Ravindra Singh ◽  
Om Prakash
Keyword(s):  
Liquid Chromatography ◽  
Thin Layer ◽  
Thin Layer Chromatography ◽  
High Performance ◽  
Biologically Active ◽  
Toxicological Studies ◽  
Wide Range ◽  
Layer Chromatography

Holoptelea integrifolia Roxb. Planch (HI) has been used to treat various ailments including obesity, osteoarthritis, arthritis, inflammation, anemia, diabetes etc. To review the major phytochemicals and medicinal properties of HI, exhaustive bibliographic research was designed by means of various scientific search engines and databases. Only 12 phytochemicals have been reported including biologically active compounds like betulin, betulinic acid, epifriedlin, octacosanol, Friedlin, Holoptelin-A and Holoptelin-B. Analytical methods including the Thin Layer Chromatography (TLC), High-Performance Thin Layer Chromatography (HPTLC), High-Performance Liquid Chromatography (HPLC) and Liquid Chromatography With Mass Spectral (LC-MS) analysis have been used to analyze the HI. From medicinal potency point of view, these phytochemicals have a wide range of pharmacological activities such as antioxidant, antibacterial, anti-inflammatory, and anti-tumor. In the current review, it has been noticed that the mechanism of action of HI with biomolecules has not been fully explored. Pharmacology and toxicological studies are very few. This seems a huge literature gap to be fulfilled through the detailed in-vivo and in-vitro studies.

scholarly journals RELaTED Project: New Developments on Ultra-Low Temperature District Heating Networks

Proceedings ◽  
2020 ◽  
Vol 65 (1) ◽  
pp. 25
Author(s):  
Antonio Garrido Marijuan ◽  
Roberto Garay ◽  
Mikel Lumbreras ◽  
Víctor Sánchez ◽  
Olga Macias ◽  
...  
Keyword(s):  
Low Temperature ◽  
High Performance ◽  
Waste Heat ◽  
District Heating ◽  
Hot Water ◽  
Thermal Systems ◽  
Heating Source ◽  
Wide Range ◽  
Thermal Sources ◽  
Heating Networks

District heating networks deliver around 13% of the heating energy in the EU, being considered as a key element of the progressive decarbonization of Europe. The H2020 REnewable Low TEmperature District project (RELaTED) seeks to contribute to the energy decarbonization of these infrastructures through the development and demonstration of the following concepts: reduction in network temperature down to 50 °C, integration of renewable energies and waste heat sources with a novel substation concept, and improvement on building-integrated solar thermal systems. The coupling of renewable thermal sources with ultra-low temperature district heating (DH) allows for a bidirectional energy flow, using the DH as both thermal storage in periods of production surplus and a back-up heating source during consumption peaks. The ultra-low temperature enables the integration of a wide range of energy sources such as waste heat from industry. Furthermore, RELaTED also develops concepts concerning district heating-connected reversible heat pump systems that allow to reach adequate thermal levels for domestic hot water as well as the use of the network for district cooling with high performance. These developments will be demonstrated in four locations: Estonia, Serbia, Denmark, and Spain.

scholarly journals TEMPERATURE - GERMINATION RESPONSES OF SUNFLOWER (Helianthus annuus L.) GENOTYPES / GERMINACION COMO REACCION A LA TEMPERATURA EN LOS GENOTIPOS DEL GIRASOL (Helianthus annuus L.) / GERMINATION - RÉACTION À LA TEMPÉRATURE DANS LES GÉNOTYPES DE TOURNESOL (Helianthus annuus L.)

Helia ◽  
2000 ◽  
Vol 23 (33) ◽  
pp. 97-104
Author(s):  
F.M. Khalifa ◽  
A.A. Schneiter ◽  
E.I. El Tayeb
Keyword(s):  
Seed Germination ◽  
Helianthus Annuus ◽  
Maximum Rate ◽  
Germination Rate ◽  
Thermal Time ◽  
Large Temperature ◽  
Climatic Zones ◽  
Helianthus Annuus L ◽  
Wide Range ◽  
Cardinal Temperature

SUMMARY Seed germination of six sunflower (Helianthus annuus L.) hybrids was investigated across a range of eleven constant temperatures between 5°C and 45°C. Large temperature differences in germination rate 1/t (d-1), cardinal temperature (°C) and thermal time θ (°cd) were observed among hybrids. Base temperatures (Tb) varied between 3.3°C and 6.7°C whereas maximum germination temperatures (Tm) varied between 41.7°C and 48.9°C. Final germination fraction was attained at 15°C - 25°C whereas the maximum rate of germination was attained at 30.4°C - 35.6°C. The maximum germination rate of hybrid USDA 894, the cultivar with the slowest germination rate, was only 50% of that of hybrid EX 47. The low Tb and high Tm of sunflower appear to be one of the factors which explain the successful adaptation of sunflower to a wide range of temperature. These findings are discussed in relation to the origin of the crop and its wide adaptations in diverse habitats and climatic zones.

scholarly journals Applicability of Cork as Novel Modifiers to Develop Electrochemical Sensor for Caffeine Determination

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 37
Author(s):  
Mayra K. S. Monteiro ◽  
Djalma R. Da Silva ◽  
Marco A. Quiroz ◽  
Vítor J. P. Vilar ◽  
Carlos A. Martínez-Huitle ◽  
...  
Keyword(s):  
Electrochemical Sensor ◽  
Linear Response ◽  
High Performance ◽  
Low Cost ◽  
Pharmaceutical Formulations ◽  
Caffeine Concentration ◽  
Real Samples ◽  
Wide Range ◽  
Potential Use

This study aims to investigate the applicability of a hybrid electrochemical sensor composed of cork and graphite (Gr) for detecting caffeine in aqueous solutions. Raw cork (RAC) and regranulated cork (RGC, obtained by thermal treatment of RAC with steam at 380 °C) were tested as modifiers. The results clearly showed that the cork-graphite sensors, GrRAC and GrRGC, exhibited a linear response over a wide range of caffeine concentration (5–1000 µM), with R2 of 0.99 and 0.98, respectively. The limits of detection (LOD), estimated at 2.9 and 6.1 µM for GrRAC and GrRGC, suggest greater sensitivity and reproducibility than the unmodified conventional graphite sensor. The low-cost cork-graphite sensors were successfully applied in the determination of caffeine in soft drinks and pharmaceutical formulations, presenting well-defined current signals when analyzing real samples. When comparing electrochemical determinations and high performance liquid chromatography measurements, no significant differences were observed (mean accuracy 3.0%), highlighting the potential use of these sensors to determine caffeine in different samples.

scholarly journals Review of Functional Treatments for Modified Wood

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 327
Author(s):  
Morwenna J. Spear ◽  
Simon F. Curling ◽  
Athanasios Dimitriou ◽  
Graham A. Ormondroyd
Keyword(s):  
High Performance ◽  
Responsive Materials ◽  
Wood Modification ◽  
Wide Range ◽  
Natural Wood ◽  
Impregnation Modification ◽  
New Applications ◽  
New Generation ◽  
Dimensional Instability ◽  
Modified Wood

Wood modification is now widely recognized as offering enhanced properties of wood and overcoming issues such as dimensional instability and biodegradability which affect natural wood. Typical wood modification systems use chemical modification, impregnation modification or thermal modification, and these vary in the properties achieved. As control and understanding of the wood modification systems has progressed, further opportunities have arisen to add extra functionalities to the modified wood. These include UV stabilisation, fire retardancy, or enhanced suitability for paints and coatings. Thus, wood may become a multi-functional material through a series of modifications, treatments or reactions, to create a high-performance material with previously impossible properties. In this paper we review systems that combine the well-established wood modification procedures with secondary techniques or modifications to deliver emerging technologies with multi-functionality. The new applications targeted using this additional functionality are diverse and range from increased electrical conductivity, creation of sensors or responsive materials, improvement of wellbeing in the built environment, and enhanced fire and flame protection. We identified two parallel and connected themes: (1) the functionalisation of modified timber and (2) the modification of timber to provide (multi)-functionality. A wide range of nanotechnology concepts have been harnessed by this new generation of wood modifications and wood treatments. As this field is rapidly expanding, we also include within the review trends from current research in order to gauge the state of the art, and likely direction of travel of the industry.

scholarly journals Optimization of a Method for Extraction and Determination of Residues of Selected Antimicrobials in Soil and Plant Samples Using HPLC-UV-MS/MS

2021 ◽  
Vol 18 (3) ◽  
pp. 1159
Author(s):  
Klaudia Kokoszka ◽  
Agnieszka Kobus ◽  
Sylwia Bajkacz
Keyword(s):  
Nalidixic Acid ◽  
High Performance ◽  
Solid Phase ◽  
Sewage Treatment ◽  
Animal Manure ◽  
Uv Detector ◽  
Citrate Buffer ◽  
High Biological Activity ◽  
Extraction Solvent

The residues of antimicrobials used in human and veterinary medicine are popular pollutants of anthropogenic origin. The main sources of introducing antimicrobials into the environment are sewage treatment plants and the agricultural industry. Antimicrobials in animal manure contaminate the surrounding soil as well as groundwater, and can be absorbed by plants. The presence of antimicrobials in food of plant origin may pose a threat to human health due to their high biological activity. As part of the research, a procedure was developed for the extraction and determination of ciprofloxacin, enrofloxacin, cefuroxime, nalidixic acid and metronidazole in environmental samples (soil and parsley root). An optimized solid-liquid extraction (SLE) method was used to separate antimicrobials from the solid samples and a mixture of citrate buffer (pH = 4): methanol (1:1; v/v) was used as the extraction solvent. Solid phase extraction (SPE) with OASIS® HLB cartridges was used to purify and pre-concentrate the sample. The recovery of the developed method was in the range of 55–108%. Analytes were determined by high-performance liquid chromatography coupled with an ultraviolet (UV) detector and a tandem mass spectrometer (HPLC-UV-MS/MS). The procedure was validated and applied to the determination of selected antimicrobials in soil and parsley root samples. Five types of soil and five types of parsley roots of different origins were analyzed. The presence of nalidixic acid in the parsley root samples was found in the concentration range of 0.14–0.72 ng g−1. It has been shown that antimicrobials are absorbed by the plant and can accumulate antimicrobials in its edible parts.

Sign in / Sign up

Export Citation Format

Share Document