Calculation of the rate of bulk fluid flow by exponential and logarithmic expressions

2020 ◽  
pp. 77-87
Author(s):  
V. N. Manzhai ◽  
A. A. Milke ◽  
D. A. Zubarev

A formula is presented to calculate the rate of bulk fluid flow in accord with hydrodynamic flow parameters and physical-chemical characteristics of pumping fluids. The formula was derived based on a model knowledge of fluid flow as a continuous sequence of strains — rotations of fluid fragments by the action of shear stress. Laboratory testing of volumetric flow rate depending on the hydrodynamic flow parameters and physical-chemical properties of liquids performed on a turbulent rheometer and as working fluids used ethanol and gasoline. The power and logarithmic dependences of the volume velocity were also checked using real data from the operation of oilfield pipelines. The results obtained satisfactory agree with the calculated data.

2008 ◽  
Vol 75 (5) ◽  
pp. 1308-1314 ◽  
Author(s):  
Krishnaraj Ganeshnarayan ◽  
Suhagi M. Shah ◽  
Matthew R. Libera ◽  
Anthony Santostefano ◽  
Jeffrey B. Kaplan

ABSTRACT Biofilms are composed of bacterial cells encased in a self-synthesized, extracellular polymeric matrix. Poly-β(1,6)-N-acetyl-d-glucosamine (PNAG) is a major biofilm matrix component in phylogenetically diverse bacteria. In this study we investigated the physical and chemical properties of the PNAG matrix in biofilms produced in vitro by the gram-negative porcine respiratory pathogen Actinobacillus pleuropneumoniae and the gram-positive device-associated pathogen Staphylococcus epidermidis. The effect of PNAG on bulk fluid flow was determined by measuring the rate of fluid convection through biofilms cultured in centrifugal filter devices. The rate of fluid convection was significantly higher in biofilms cultured in the presence of the PNAG-degrading enzyme dispersin B than in biofilms cultured without the enzyme, indicating that PNAG decreases bulk fluid flow. PNAG also blocked transport of the quaternary ammonium compound cetylpyridinium chloride (CPC) through the biofilms. Binding of CPC to biofilms further impeded fluid convection and blocked transport of the azo dye Allura red. Bioactive CPC was efficiently eluted from biofilms by treatment with 1 M sodium chloride. Taken together, these findings suggest that CPC reacts directly with the PNAG matrix and alters its physical and chemical properties. Our results indicate that PNAG plays an important role in controlling the physiological state of biofilms and may contribute to additional biofilm-associated processes such as biocide resistance.


2020 ◽  
Vol 42 (4) ◽  
pp. 33-49
Author(s):  
O.V. CHEPIZHKO ◽  
V.V. YANKO ◽  
V.M. KADURIN ◽  
I.M. NAUMKO ◽  
S.M. SHATALIN

For the first time the importance of mineralogical and lithological-petrographical ranks in the line of geological information ranks is substantiated for implementation of long-term forecasts, standard and non-standard approaches to research of physical and geochemical parameters as a basis of creation of complex system of forecast criteria and prospecting indicators of hydrocarbons within the sedimentary cover of Black sea based on the theory of global fluid-flows derivation. These criteria have different sensitivity to the object (hydrocarbon deposits) and are therefore ranked. The ranking determined the following parameters: 1) seismic data within the object, obtained by the method of deep seismic sounding, RWM SDP; 2) parameters of tectono-geodynamic structures; 3) the main characteristics of sedimentary cover and bedrock; 4) geochemical characteristics; 5) parameters of mineral complexes and fluid inclusions in mineral neoformations; 6) the value of the distribution of meiobenthos. Based on modern views of oil and gas geology, structural-tectonic and lithological-facies criteria are among the main ones. The study of the mineralogical component of sediments is made with using mineralogical, thermobarogeochemical and X-ray spectral methods. Fixation of anomalies of fluid flow at the bottom of the Black Sea as to the distribution of abiotic parameters in order to assess the prospects of oil and gas is determined by structural and tectonic features and high permeability of fluid flow; parameters of mineral complexes (minerals, facies) and genetic connections; heterogeneity of geochemical characteristics of bottom sediments; the presence of hydrocarbon inclusions in authigenic minerals of bottom sediments.


1986 ◽  
Vol 21 (3) ◽  
pp. 344-350 ◽  
Author(s):  
Barry G. Oliver ◽  
Klaus L.E. Kaiser

Abstract The concent rat ions of hexachloroethane (HCE), hexachlorobutadiene (HCBD), pentachlorobenzene (QCB), hexachlorobenzene (HCB) and octachlorostyrene (OCS) in large volume water samples show that the major sources of these chemicals to the St. Clair River are Dow Chemical Company effluents and, to a lesser degree, Sarnia’s Township ditch which drains one of Dow’s waste disposal sites. Tributaries entering the river on both sides of the Canada/United States border contain measurable concentrations of these chemicals indicating low level contamination throughout the area. The degree of water/suspended sediment partitioning of the chemicals (Kp) was studied. Kp values for the individual chemicals changed in a manner consistent with changes in their physical-chemical properties.


2020 ◽  
Vol 20 (11) ◽  
pp. 1340-1351 ◽  
Author(s):  
Ponnurengam M. Sivakumar ◽  
Matin Islami ◽  
Ali Zarrabi ◽  
Arezoo Khosravi ◽  
Shohreh Peimanfard

Background and objective: Graphene-based nanomaterials have received increasing attention due to their unique physical-chemical properties including two-dimensional planar structure, large surface area, chemical and mechanical stability, superconductivity and good biocompatibility. On the other hand, graphene-based nanomaterials have been explored as theranostics agents, the combination of therapeutics and diagnostics. In recent years, grafting hydrophilic polymer moieties have been introduced as an efficient approach to improve the properties of graphene-based nanomaterials and obtain new nanoassemblies for cancer therapy. Methods and results: This review would illustrate biodistribution, cellular uptake and toxicity of polymergraphene nanoassemblies and summarize part of successes achieved in cancer treatment using such nanoassemblies. Conclusion: The observations showed successful targeting functionality of the polymer-GO conjugations and demonstrated a reduction of the side effects of anti-cancer drugs for normal tissues.


2021 ◽  
Vol 11 (10) ◽  
pp. 4417
Author(s):  
Veronica Vendramin ◽  
Gaia Spinato ◽  
Simone Vincenzi

Chitosan is a chitin-derived fiber, extracted from the shellfish shells, a by-product of the fish industry, or from fungi grown in bioreactors. In oenology, it is used for the control of Brettanomyces spp., for the prevention of ferric, copper, and protein casse and for clarification. The International Organisation of Vine and Wine established the exclusive utilization of fungal chitosan to avoid the eventuality of allergic reactions. This work focuses on the differences between two chitosan categories, fungal and animal chitosan, characterizing several samples in terms of chitin content and degree of deacetylation. In addition, different acids were used to dissolve chitosans, and their effect on viscosity and on the efficacy in wine clarification were observed. The results demonstrated that even if fungal and animal chitosans shared similar chemical properties (deacetylation degree and chitin content), they showed different viscosity depending on their molecular weight but also on the acid used to dissolve them. A significant difference was discovered on their fining properties, as animal chitosans showed a faster and greater sedimentation compared to the fungal ones, independently from the acid used for their dissolution. This suggests that physical–chemical differences in the molecular structure occur between the two chitosan categories and that this significantly affects their technologic (oenological) properties.


2020 ◽  
Vol 59 (1) ◽  
pp. 441-454
Author(s):  
Carlos A. Martínez-Pérez

AbstractIn the last years, electrospinning has become a technique of intense research to design and fabricate drug delivery systems (DDS), during this time a vast variety of DDS with mainly electrospun polymers and many different active ingredient(s) have been developed, many intrinsic and extrinsic factor have influence in the final system, there are those that can be attributed to the equipment set up and that to the physical-chemical properties of the used materials in the fabrication of DDS. After all, this intense research has generated a great amount of DDS loaded with one or more drugs. In this manuscript a review with the highlights of different kind of systems for drug delivery systems is presented, it includes the basic concepts of electrospinning, types of equipment set up, polymer/drug systems, limitations and challenges that need to be overcome for clinical applications.


2021 ◽  
Vol 494 ◽  
pp. 119334
Author(s):  
Vinicius Evangelista Silva ◽  
Thiago Assis Rodrigues Nogueira ◽  
Cassio Hamilton Abreu-Junior ◽  
Arun Dilipkumar Jani ◽  
Salatier Buzetti ◽  
...  

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Pia Montanucci ◽  
Silvia Terenzi ◽  
Claudio Santi ◽  
Ilaria Pennoni ◽  
Vittorio Bini ◽  
...  

Alginate-based microencapsulation of live cells may offer the opportunity to treat chronic and degenerative disorders. So far, a thorough assessment of physical-chemical behavior of alginate-based microbeads remains cloudy. A disputed issue is which divalent cation to choose for a high performing alginate gelling process. Having selected, in our system, high mannuronic (M) enriched alginates, we studied different gelling cations and their combinations to determine their eventual influence on physical-chemical properties of the final microcapsules preparation,in vitroandin vivo. We have shown that used of ultrapure alginate allows for high biocompatibility of the formed microcapsules, regardless of gelation agents, while use of different gelling cations is associated with corresponding variable effects on the capsules’ basic architecture, as originally reported in this work. However, only the final application which the capsules are destined to will ultimately guide the selection of the ideal, specific gelling divalent cations, since in principle there are no capsules that are better than others.


Sign in / Sign up

Export Citation Format

Share Document