scholarly journals Optimal Operating Conditions for Adsorption of Heavy Metals from an Aqueous Solution by an Agriculture Waste

2021 ◽  
Vol 22 (2) ◽  
pp. 27-35
Author(s):  
Khalid Khazzal Hummadi
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Operating Conditions ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Scale Production ◽  
Optimal Operating ◽  
Date Pits

   The aim of this work is to detect the best operating conditions that effect on the removal of Cu2+, Zn2+, and Ni2+ ions from aqueous solution using date pits in the batch adsorption experiments. The results have shown that the Al-zahdi Iraqi date pits demonstrated more efficient at certain values of operating conditions of adsorbent doses of 0.12 g/ml of aqueous solution, adsorption time 72 h, pH solution 5.5 ±0.2, shaking speed  300 rpm, and smallest adsorbent particle size needed for removal of metals.  At the same time the particle size of date pits has a little effect on the adsorption at low initial concentration of heavy metals. The adsorption of metals increases with increasing the initial of metal concentration while above the 85 ppm, the removal efficiency was decreased. The phenomenon of adsorption of heavy metals on to Al-Zahdi Iraqi Date pits is exothermic process. The maximum adsorption capacity according to the Langmuir equation was 0.21, 0.149, and 0.132 mmol/g for Cu2+, Zn2+, and Ni2+ respectively. The adsorption equilibrium was well described by the Freundlich model. The results of Freundlich constants indicated that the adsorption capacity and adsorption intensity of Copper is larger than the Zinc and Nickel. The intraparticle diffusion was involved is this process but it is not the controlling step. The results of this study may inspire to find the optimal operating conditions for adsorption and develop that with large-scale production to clean the polluted water with heavy metals.

Immobilization of Persimmon Tannin on Cellulose Viscopearls and Removal of Caffeine from Aqueous Solution

2015 ◽  
Vol 1767 ◽  
pp. 93-105
Author(s):  
Dennise Alejandra Murguía Flores ◽  
Ahmad La Ode ◽  
Ko-Ki Kunimoto ◽  
Jaime Bonilla Ríos
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Batch Adsorption ◽  
Caffeine Concentration ◽  
Sem Images ◽  
Adsorbent Dosage ◽  
Equilibrium Data ◽  
Particle Size And Shape ◽  
Water Contents

ABSTRACTAn eco-friendly adsorbent was prepared by immobilization of Persimmon Tannin (PT) in cellulose viscopearls to remove caffeine. The immobilization time within a range of 1-42days was performed. Batch adsorption experiments were studied for different Persimmon Tannin on Cellulose Viscopearls (PTIC) gel samples, adsorbent dosage, and initial caffeine concentration. FTIR indicated that PT was successfully immobilized onto viscopearls. SEM images showed differences especially on particle size and shape, between control, day7, and day28 of PTIC gel samples. The adsorption capacity results showed that removal of caffeine as the amount of adsorbed increased, the percentage of caffeine adsorption increased accordingly, but it decreased with the increased in initial caffeine concentration. Results for different PTIC gel samples showed that day 42 PTIC sample exhibits the highest adsorption capacity of caffeine solution of 43.3mg/g. The samples showed water contents in the range of 343-324%.The equilibrium data were analyzed using Freundlich and Langmuir equations. It suggested that viscopearls acted to be a suitable insoluble matrix to immobilized PT, instead of using crosslinkers.

Utilization of Waste of Enzymes Biomass as Biosorbent for the Removal of Dyes from Aqueous Solution in Batch and Fluidized Bed Column

2020 ◽  
Vol 71 (1) ◽  
pp. 1-12
Author(s):  
Salman H. Abbas ◽  
Younis M. Younis ◽  
Mohammed K. Hussain ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Fungal Biomass ◽  
Solution Flow Rate ◽  
Maximum Adsorption Capacity ◽  
Solution Flow

The biosorption performance of both batch and liquid-solid fluidized bed operations of dead fungal biomass type (Agaricusbisporus ) for removal of methylene blue from aqueous solution was investigated. In batch system, the adsorption capacity and removal efficiency of dead fungal biomass were evaluated. In fluidized bed system, the experiments were conducted to study the effects of important parameters such as particle size (701-1400�m), initial dye concentration(10-100 mg/L), bed depth (5-15 cm) and solution flow rate (5-20 ml/min) on breakthrough curves. In batch method, the experimental data was modeled using several models (Langmuir,Freundlich, Temkin and Dubinin-Radushkviechmodels) to study equilibrium isotherms, the experimental data followed Langmuir model and the results showed that the maximum adsorption capacity obtained was (28.90, 24.15, 21.23 mg/g) at mean particle size (0.786, 0.935, 1.280 mm) respectively. In Fluidized-bed method, the results show that the total ion uptake and the overall capacity will be decreased with increasing flow rate and increased with increasing initial concentrations, bed depth and decreasing particle size.

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Contact Time ◽  
Competitive Adsorption ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

Removal of Cd(II) from Water System Using Novel Biosorbent Derived from Persimmon Fallen Leaves

2015 ◽  
Vol 1130 ◽  
pp. 685-688
Author(s):  
Rui Yi Fan ◽  
Qing Ping Yi ◽  
Qing Lin Zhang ◽  
Zheng Rong Luo
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Water System ◽  
Raw Material ◽  
Batch Adsorption ◽  
Diospyros Kaki ◽  
Cadmium Metal ◽  
Fallen Leaves ◽  
Adsorption Desorption

A biosorbent was prepared by treating the persimmon (Diospyros kaki Thunb.) fallen leaves with sodium hydroxide (NaOH). The NaOH concentration and stirring period for the preparation of the biosorbent were adjusted to optimise the Cd(I) adsorption capacity of the biosorbents. Removal of highly toxic Cadmium metal ions from water system using the optimal biosorbent named ‘NPFL’ was investigated using a mimic industrial column. The result showed that NPFL could remove Cd(II) in large quantities from aqueous solution with coexisting metal ions. The raw material, NPFL and Cd(II) loaded NPFL were characterized by SEM-EDS. The reusability of NPFL was also studied by batch adsorption-desorption test.

scholarly journals Cefquinome Controlled Size Submicron Particles Precipitation by SEDS Process Using Annular Gap Nozzle

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Kefeng Xiao ◽  
Weiqiang Wang ◽  
Dedong Hu ◽  
Yanpeng Qu ◽  
Zhihui Hao ◽  
...  
Keyword(s):  
Particle Size ◽  
Xrd Analysis ◽  
Solution Concentration ◽  
Operating Conditions ◽  
Submicron Particles ◽  
Optimal Operating ◽  
Surface Appearance ◽  
Precipitation Temperature ◽  
Annular Gap ◽  
Feeding Speed

An annular gap nozzle was applied in solution enhanced dispersion by supercritical fluids (SEDS) process to prepare cefquinome controlled size submicron particles so as to enhance their efficacy. Analysis results of orthogonal experiments indicated that the concentration of solution was the primary factor to affect particle sizes in SEDS process, and feeding speed of solution, precipitation pressure, and precipitation temperature ranked second to fourth. Meanwhile, the optimal operating conditions were that solution concentration was 100 mg/mL, feeding speed was 9 mL/min, precipitation pressure was 10 MPa, and precipitation temperature was 316 K. The confirmatory experiment showed that D50 of processed cefquinome particles in optimal operating conditions was 0.73 μm. Moreover, univariate effect analysis showed that the cefquinome particle size increased with the increase of concentration of the solution or precipitation pressure but decreased with the increase of solution feeding speed. When precipitation temperature increased, the cefquinome particle size showed highest point. Moreover, characterization of processed cefquinome particles was analyzed by SEM, FT-IR, and XRD. Analysis results indicated that the surface appearance of processed cefquinome particles was flakes. The chemical structure of processed cefquinome particles was not changed, and the crystallinity of processed cefquinome particles was a little lower than that of raw cefquinome particles.

Kinetic and equilibrium studies of fluoride sorption onto surfactant-modified smectites

Clay Minerals ◽  
2012 ◽  
Vol 47 (4) ◽  
pp. 429-440 ◽  
Author(s):  
S. Gamoudi ◽  
N. Frini-Srasra ◽  
E. Srasra
Keyword(s):  
Aqueous Solution ◽  
Thermodynamic Parameters ◽  
Adsorption Kinetics ◽  
Equilibrium Constants ◽  
Second Order ◽  
Operating Conditions ◽  
Polluted Water ◽  
Isotherm Models ◽  
Fluoride Ions ◽  
Pseudo Second Order

AbstractThe use of organoclays as adsorbents in the remediation of polluted water has been the subject of many recent studies. In the present work, a Tunisian smectite modified with two cationic surfactants was used as an adsorbent to examine the adsorption kinetics, isotherms and thermodynamic parameters of fluoride ions from aqueous solution. Various pH values, initial concentrations and temperatures have been tested. Two simplified kinetic models, first-order and pseudo-second-order, were used to predict the adsorption rate constants. It was found that the adsorption kinetics of fluoride onto modified smectites at different operating conditions can best be described by the pseudo-second-order model. Adsorption isotherms and equilibrium adsorption capacities were determined by the fitting of the experimental data to well known isotherm models including those of Langmuir and Freundlich. The results showed that the Langmuir model appears to fit the adsorption better than the Freundlich adsorption model for the adsorption of fluoride ions onto modified smectites. The equilibrium constants were used to calculate thermodynamic parameters, such as the change of free energy, enthalpy and entropy. Results of this study demonstrated the effectiveness and feasibility of organoclays for the removal of fluoride ions from aqueous solution.

Potential of Agricultural Waste Material (Ananas cosmos) as Biosorbent for Heavy Metal Removal in Polluted Water

2020 ◽  
Vol 1010 ◽  
pp. 489-494
Author(s):  
Abdul Hafidz Yusoff ◽  
Rosmawani Mohammad ◽  
Mardawani Mohamad ◽  
Ahmad Ziad Sulaiman ◽  
Nurul Akmar Che Zaudin ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Adsorption Capacity ◽  
Metal Removal ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Pineapple Peel

Conventional methods to remove heavy metals from polluted water are expensive and not environmentally friendly. Therefore, this study was carried out to investigate the potential of agricultural waste such as pineapple peel (Ananas Cosmos) as low-cost absorbent to remove heavy metals from synthetic polluted water. The results showed that Cd, Cr and Pb were effectively removed by the biosorbent at 12g of pineapple peels in 100 mL solution. The optimum contact time for maximum adsorption was found to be 90 minutes, while the optimum pH for the heavy metal’s adsorption was 9. It was demonstrated that with the increase of adsorbent dosage, the percent of heavy metals removal was also increased due to the increasing adsorption capacity of the adsorbent. In addition, Langmuir model show maximum adsorption capacity of Cd is 1.91 mg/g. As conclusions, our findings show that pineapple peel has potential to remove heavy metal from polluted water.

Adsorption of cadmium by biochar produced from pyrolysis of corn stalk in aqueous solution

2016 ◽  
Vol 74 (6) ◽  
pp. 1335-1345 ◽  
Author(s):  
Fengfeng Ma ◽  
Baowei Zhao ◽  
Jingru Diao
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Ionic Strength ◽  
Ph Value ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Corn Stalk ◽  
Adsorbent Dosage ◽  
Initial Ph ◽  
Adsorbent Particle

The purpose of this work is to investigate adsorption characteristic of corn stalk (CS) biochar for removal of cadmium ions (Cd2+) from aqueous solution. Batch adsorption experiments were carried out to evaluate the effects of pH value of solution, adsorbent particle size, adsorbent dosage, and ionic strength of solution on the adsorption of Cd2+ onto biochar that was pyrolytically produced from CS at 300 °C. The results showed that the initial pH value of solution played an important role in adsorption. The adsorptive amount of Cd2+ onto the biochar decreased with increasing the adsorbent dosage, adsorbent particle size, and ionic strength, while it increased with increasing the initial pH value of solution and temperature. Cd2+ was removed efficiently and quickly from aqueous solutions by the biochar with a maximum capacity of 33.94 mg/g. The adsorption process was well described by the pseudo-second-order kinetic model with the correlation coefficients greater than 0.986. The adsorption isotherm could be well fitted by the Langmuir model. The thermodynamic studies showed that the adsorption of Cd2+ onto the biochar was a spontaneous and exothermic process. The results indicate that CS biochar can be considered as an efficient adsorbent.

Adsorption of Cu(II) from Aqueous Solution by Peanut Shell

2011 ◽  
Vol 347-353 ◽  
pp. 1852-1855 ◽  
Author(s):  
Zheng Jun Gong ◽  
Cong Cong Tang ◽  
Cai Yun Sun ◽  
Lu Tang ◽  
Jun Chen
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Isotherms ◽  
Batch Adsorption ◽  
Present System ◽  
Peanut Shell ◽  
Optimum Conditions ◽  
Langmuir Adsorption ◽  
Adsorption Data ◽  
Adsorption Intensity

A natural peanut shell was used as adsorbent for removal of Cu(Ⅱ) from aqueous solution. Optimum conditions for the elimination of Cu(Ⅱ) from aqueous solution were established by means of a batch adsorption technique. The applicability of the Langmuir and Freundlich adsorption isotherms for the present system was tested. The Langmuir adsorption capacity Qmax (mg/g) is 39.68 and the equilibrium constant b is 0.00776. The Freundlich adsorption capacity k is 0.978 and adsorption intensity n is 1.65. The goodness of fitness was obtained with the Langmuir and Freundlich adsorption isotherms from the equilibrium adsorption data.

scholarly journals Adsorption and desorption studies of <i>Delonix regia</i> pods and leaves: removal and recovery of Ni(II) and Cu(II) ions from aqueous solution

2020 ◽  
Vol 13 (2) ◽  
pp. 15-27 ◽  
Author(s):  
Bolanle M. Babalola ◽  
Adegoke O. Babalola ◽  
Cecilia O. Akintayo ◽  
Olayide S. Lawal ◽  
Sunday F. Abimbade ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Ion ◽  
Agricultural Waste ◽  
Waste Product ◽  
Operating Conditions ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Delonix Regia

Abstract. In this study, the adsorption of Ni(II) and Cu(II) ions from aqueous solutions by powdered Delonix regia pods and leaves was investigated using batch adsorption techniques. The effects of operating conditions such as pH, contact time, adsorbent dosage, metal ion concentration and the presence of sodium ions interfering with the sorption process were investigated. The results obtained showed that equilibrium sorption was attained within 30 min of interaction, and an increase in the initial concentration of the adsorbate, pH and adsorbent dosage led to an increase in the amount of Ni(II) and Cu(II) ions adsorbed. The adsorption process followed the pseudo-second-order kinetic model for all metal ions' sorption. The equilibrium data fitted well with both the Langmuir and Freundlich isotherms; the monolayer adsorption capacity (Q0 mg g−1) of the Delonix regia pods and leaves was 5.88 and 5.77 mg g−1 for Ni(II) ions respectively and 9.12 and 9.01 mg g−1 for Cu(II) ions respectively. The efficiency of the powdered pods and leaves of Delonix regia with respect to the removal of Ni(II) and Cu(II) ions was greater than 80 %, except for the sorption of Ni(II) ions onto the leaves. The desorption study revealed that the percentage of metal ions recovered from the pods was higher than that recovered from the leaves at various nitric acid concentrations. This study proves that Delonix regia biomass, an agricultural waste product (“agro-waste”), could be used to remove Ni(II) and Cu(II) ions from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document