Development of plagiocephaly in rabbits with unicoronal synostosis

1996 ◽  
Vol 85 (5) ◽  
pp. 929-936 ◽  
Author(s):  
Annie M. Burrows ◽  
Mark P. Mooney ◽  
Tim D. Smith ◽  
H. Wolfgang Losken ◽  
Michael I. Siegel
Keyword(s):  
Compensatory Growth ◽  
Rabbit Model ◽  
Growth Patterns ◽  
Cranial Vault ◽  
Growth Data ◽  
Ipsilateral Side ◽  
Content Type ◽  
X Ray ◽  
Naturally Occurring ◽  
Student’S T

✓ Human unicoronal synostosis results in plagiocephaly of the cranial vault due to predictable compensatory growth patterns of the contralateral coronal, sagittal, and ipsilateral squamosal sutures. The present study describes the development of plagiocephaly and tests compensatory growth predictions in a naturally occurring rabbit model of uncorrected unicoronal synostosis. Cranial vault and sutural growth data were collected from serial x-ray films in 70 normal rabbits and 19 rabbits with congenital unicoronal synostosis from 1.5 to 18 weeks of age. One-way analysis of variance results revealed that rabbits with unicoronal synostosis had significant (p < 0.05) growth inhibition at both coronal sutures and the contralateral frontonasal suture and a significantly wider (p < 0.05) cranial vault compared to controls. Paired Student's t-tests between affected and unaffected sides of the vault in rabbits with synostosis revealed significant (p < 0.05) asymmetry, with ipsilateral coronal sutures growing less than contralateral ones. Gross qualitative examination of the adult brains revealed severe asymmetry and anteroposterior reduction on the ipsilateral side. These results demonstrate that this congenital rabbit model effectively simulates human cranial vault growth predictions from unicoronal synostosis and produces a plagiocephalic morphology.

Growth of the Cranial Vault in Rabbits with Congenital Coronal Suture Synostosis

1995 ◽  
Vol 32 (3) ◽  
pp. 235-246 ◽  
Author(s):  
Annie M. Burrows ◽  
Mark P. Mooney ◽  
Timothy D. Smith ◽  
H. Wolfgang Losken ◽  
Michael I. Siegel
Keyword(s):  
Compensatory Growth ◽  
Rabbit Model ◽  
Growth Patterns ◽  
Cranial Vault ◽  
Craniofacial Growth ◽  
Coronal Suture ◽  
Cranial Suture ◽  
Growth Data ◽  
Litter Mate ◽  
Clinical Populations

Craniofacial growth data from craniosynostotic children have shown that suture immobilization results in predictable restrictions of cranial vault growth in a direction perpendicular to the affected suture and compensatory growth at sutures perpendicular to the affected one. This study tests these predictions by using rabbits with nonsyndromic congenital coronal suture synostosis. Data were collected from 96 rabbits divided into three groups: 42 unaffected litter mate controls, 33 partially synostosed rabbits, and 21 completely synostosed rabbits. Markers were placed bilaterally on either side of the vault sutures at 1.5 weeks of age. Serial radiographs were taken at 1.5, 6, 12, and 18 weeks of age for assessment of growth at the vault sutures and of various cranial landmarks. Results revealed that completely synostosed animals had significantly (p <.05) shorter cranial vaults, reduced growth at the coronal suture, and increased growth at the sagittal, frontal, and squamosal sutures compared with unaffected rabbits. Results also showed that the calvarial growth observed in this craniosynostotic rabbit model closely reflects predicted compensatory patterns seen in human clinical populations and that this rabbit model is valuable for understanding the pathogeneses and craniofacial growth patterns of humans with premature cranial suture synostosis.

Cranial vault growth in craniosynostosis

1989 ◽  
Vol 70 (2) ◽  
pp. 159-165 ◽  
Author(s):  
Johnny B. Delashaw ◽  
John A. Persing ◽  
William C. Broaddus ◽  
John A. Jane
Keyword(s):  
Compensatory Growth ◽  
Growth Patterns ◽  
Growth Potential ◽  
Cranial Vault ◽  
Bone Plate ◽  
Content Type ◽  
Suture Closure ◽  
Single Bone ◽  
Bone Deposition ◽  
Single Suture

✓ Skull growth after single suture closure was described in 1851 by Virchow, who noted that growth in the plane perpendicular to a fused suture was restricted. However, this observation failed to predict compensatory growth patterns that produce many of the deformities recognized as features of individual syndromes. The deformities resulting from premature closure of a coronal, sagittal, metopic, or lambdoid suture can be predicted on the basis of the following observations: 1) cranial vault bones that are prematurely fused secondary to single suture closure act as a single bone plate with decreased growth potential; 2) asymmetrical bone deposition occurs mainly at perimeter sutures, with increased bone deposition directed away from the bone plate; 3) sutures adjacent to the prematurely fused suture compensate in growth more than those sutures not contiguous with the closed suture; and 4) enhanced symmetrical bone deposition occurs along both sides of a non-perimeter suture that is a continuation of the prematurely closed suture. These observations regarding growth in craniosynostosis are illustrated with clinical material in this report.

High Resolution Replication of Organoclay Surfaces

1982 ◽  
Vol 40 ◽  
pp. 576-577
Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys
Keyword(s):  
Clay Mineral ◽  
Organic Molecule ◽  
Organic Molecules ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Naturally Occurring ◽  
Silicate Layers ◽  
Mineral Identification

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.

scholarly journals Hydrochloric Acid Modification and Lead Removal Studies on Naturally Occurring Zeolites from Nevada, New Mexico, and Arizona

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1238
Author(s):  
Garven M. Huntley ◽  
Rudy L. Luck ◽  
Michael E. Mullins ◽  
Nick K. Newberry
Keyword(s):  
New Mexico ◽  
Surface Area ◽  
Bet Surface Area ◽  
Lead Removal ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Naturally Occurring ◽  
27Al Mas Nmr ◽  
Modified Zeolites

Four naturally occurring zeolites were examined to verify their assignments as chabazites AZLB-Ca and AZLB-Na (Bowie, Arizona) and clinoptilolites NM-Ca (Winston, New Mexico) and NV-Na (Ash Meadows, Nevada). Based on powder X-ray diffraction, NM-Ca was discovered to be mostly quartz with some clinoptilolite residues. Treatment with concentrated HCl (12.1 M) acid resulted in AZLB-Ca and AZLB-Na, the chabazite-like species, becoming amorphous, as confirmed by powder X-ray diffraction. In contrast, NM-Ca and NV-Na, which are clinoptilolite-like species, withstood boiling in concentrated HCl acid. This treatment removes calcium, magnesium, sodium, potassium, aluminum, and iron atoms or ions from the framework while leaving the silicon framework intact as confirmed via X-ray fluorescence and diffraction. SEM images on calcined and HCl treated NV-Na were obtained. BET surface area analysis confirmed an increase in surface area for the two zeolites after treatment, NM-Ca 20.0(1) to 111(4) m2/g and NV-Na 19.0(4) to 158(7) m2/g. 29Si and 27Al MAS NMR were performed on the natural and treated NV-Na zeolite, and the data for the natural NV-Na zeolite suggested a Si:Al ratio of 4.33 similar to that determined by X-Ray fluorescence of 4.55. Removal of lead ions from solution decreased from the native NM-Ca, 0.27(14), NV-Na, 1.50(17) meq/g compared to the modified zeolites, 30 min HCl treated NM-Ca 0.06(9) and NV-Na, 0.41(23) meq/g, and also decreased upon K+ ion pretreatment in the HCl modified zeolites.

Characteristic properties of AlTiN and TiN coated HSS materials

2015 ◽  
Vol 67 (2) ◽  
pp. 172-180 ◽  
Author(s):  
Mumin Sahin ◽  
Cenk Misirli ◽  
Dervis Özkan
Keyword(s):  
Surface Roughness ◽  
Tensile Strength ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Wear Properties ◽  
Content Type ◽  
X Ray ◽  
Number Of Cycles ◽  
Future Work

Purpose – The purpose of this paper is to examine mechanical and metallurgical properties of AlTiN- and TiN-coates high-speed steel (HSS) materials in detail. Design/methodology/approach – In this study, HSS steel parts have been processed through machining and have been coated with AlTiN and TiN on physical vapour deposition workbench at approximately 6,500°C for 4 hours. Tensile strength, fatigue strength, hardness tests for AlTiN- and TiN-coated HSS samples have been performed; moreover, energy dispersive X-ray spectroscopy and X-ray diffraction analysis and microstructure analysis have been made by scanning electron microscopy. The obtained results have been compared with uncoated HSS components. Findings – It was found that tensile strength of TiAlN- and TiN-coated HSS parts is higher than that of uncoated HSS parts. Highest tensile strength has been obtained from TiN-coated HSS parts. Number of cycles for failure of TiAlN- and TiN-coated HSS parts is higher than that for HSS parts. Particularly TiN-coated HSS parts have the most valuable fatigue results. However, surface roughness of fatigue samples may cause notch effect. For this reason, surface roughness of coated HSS parts is compared with that of uncoated ones. While the average surface roughness (Ra) of the uncoated samples was in the range of 0.40 μm, that of the AlTiN- and TiN-coated samples was in the range of 0.60 and 0.80 μm, respectively. Research limitations/implications – It would be interesting to search different coatings for cutting tools. It could be the good idea for future work to concentrate on wear properties of tool materials. Practical implications – The detailed mechanical and metallurgical results can be used to assess the AlTiN and TiN coating applications in HSS materials. Originality/value – This paper provides information on mechanical and metallurgical behaviour of AlTiN- and TiN-coated HSS materials and offers practical help for researchers and scientists working in the coating area.

scholarly journals Comparison of Borate Bioactive Glass and Calcium Sulfate as Implants for the Local Delivery of Teicoplanin in the Treatment of Methicillin-Resistant Staphylococcus aureus-Induced Osteomyelitis in a Rabbit Model

2015 ◽  
Vol 59 (12) ◽  
pp. 7571-7580 ◽  
Author(s):  
Wei-Tao Jia ◽  
Qiang Fu ◽  
Wen-Hai Huang ◽  
Chang-Qing Zhang ◽  
Mohamed N. Rahaman
Keyword(s):  
Staphylococcus Aureus ◽  
Bioactive Glass ◽  
Calcium Sulfate ◽  
Rabbit Model ◽  
Local Delivery ◽  
Methicillin Resistant ◽  
Content Type ◽  
Borate Bioactive Glass ◽  
Phosphate Buffered Saline

ABSTRACTThere is growing interest in biomaterials that can cure bone infection and also regenerate bone. In this study, two groups of implants composed of 10% (wt/wt) teicoplanin (TEC)-loaded borate bioactive glass (designated TBG) or calcium sulfate (TCS) were created and evaluated for their ability to release TECin vitroand to cure methicillin-resistantStaphylococcus aureus(MRSA)-induced osteomyelitis in a rabbit model. When immersed in phosphate-buffered saline (PBS), both groups of implants provided a sustained release of TEC at a therapeutic level for up to 3 to 4 weeks while they were gradually degraded and converted to hydroxyapatite. The TBG implants showed a longer duration of TEC release and better retention of strength as a function of immersion time in PBS. Infected rabbit tibiae were treated by debridement, followed by implantation of TBG or TCS pellets or intravenous injection with TEC, or were left untreated. Evaluation at 6 weeks postimplantation showed that the animals implanted with TBG or TCS pellets had significantly lower radiological and histological scores, lower rates of MRSA-positive cultures, and lower bacterial loads than those preoperatively and those of animals treated intravenously. The level of bone regeneration was also higher in the defects treated with the TBG pellets. The results showed that local TEC delivery was more effective than intravenous administration for the treatment of MRSA-induced osteomyelitis. Borate glass has the advantages of better mechanical strength, more desirable kinetics of release of TEC, and a higher osteogenic capacity and thus could be an effective alternative to calcium sulfate for local delivery of TEC.

scholarly journals Effects of Tedizolid Phosphate on Survival Outcomes and Suppression of Production of Staphylococcal Toxins in a Rabbit Model of Methicillin-Resistant Staphylococcus aureus Necrotizing Pneumonia

2017 ◽  
Vol 61 (4) ◽  
Author(s):  
Vien T. M. Le ◽  
Hoan N. Le ◽  
Marcos Gabriel Pinheiro ◽  
Kenneth J. Hahn ◽  
Mary L. Dinh ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Bacterial Production ◽  
Protective Efficacy ◽  
Survival Rates ◽  
Rabbit Model ◽  
Rank Test ◽  
Necrotizing Pneumonia ◽  
Time Curve ◽  
Content Type

ABSTRACT The protective efficacy of tedizolid phosphate, a novel oxazolidinone that potently inhibits bacterial protein synthesis, was compared to those of linezolid, vancomycin, and saline in a rabbit model of Staphylococcus aureus necrotizing pneumonia. Tedizolid phosphate was administered to rabbits at 6 mg/kg of body weight intravenously twice daily, which yielded values of the 24-h area under the concentration-time curve approximating those found in humans. The overall survival rate was 83% for rabbits treated with 6 mg/kg tedizolid phosphate twice daily and 83% for those treated with 50 mg/kg linezolid thrice daily (P = 0.66 by the log-rank test versus the results obtained with tedizolid phosphate). These survival rates were significantly greater than the survival rates of 17% for rabbits treated with 30 mg/kg vancomycin twice daily (P = 0.003) and 17% for rabbits treated with saline (P = 0.002). The bacterial count in the lungs of rabbits treated with tedizolid phosphate was significantly decreased compared to that in the lungs of rabbits treated with saline, although it was not significantly different from that in the lungs of rabbits treated with vancomycin or linezolid. The in vivo bacterial production of alpha-toxin and Panton-Valentine leukocidin, two key S. aureus-secreted toxins that play critical roles in the pathogenesis of necrotizing pneumonia, in the lungs of rabbits treated with tedizolid phosphate and linezolid was significantly inhibited compared to that in the lungs of rabbits treated with vancomycin or saline. Taken together, these results indicate that tedizolid phosphate is superior to vancomycin for the treatment of S. aureus necrotizing pneumonia because it inhibits the bacterial production of lung-damaging toxins at the site of infection.

scholarly journals Growth Interruptions in Arctic Rhodoliths Correspond to Water Depth and Rhodolith Morphology

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 538
Author(s):  
Moritz Schlüter ◽  
Ines Pyko ◽  
Max Wisshak ◽  
Christian Schulbert ◽  
Sebastian Teichert
Keyword(s):  
Light Availability ◽  
Growth Patterns ◽  
Skeletal Growth ◽  
Coralline Algae ◽  
Ambient Light ◽  
Micro Computed Tomography ◽  
Svalbard Archipelago ◽  
X Ray ◽  
Algal Thalli ◽  
Environmental Proxies

Coralline algae that form rhodoliths are widespread globally and their skeletal growth patterns have been used as (paleo-) environmental proxies in a variety of studies. However, growth interruptions (hiati) within their calcareous skeletons are regarded as problematic in this context. Here we investigated how hiati in the growth of Arctic rhodoliths from the Svalbard archipelago correspond to their environment and morphology. Using X-ray micro-computed tomography and stepwise model selections, we found that rhodoliths from deeper waters are subject to more frequent hiatus formation. In addition, rhodoliths with a higher sphericity (i.e., roundness) are less often affected by such growth interruptions. We conclude that these correlations are mainly regulated by hydrodynamics, because, in deeper waters, rhodoliths are not turned frequently enough to prevent a dieback of coralline algal thalli forming on the underside of the rhodolith. In this coherence, spheroidal rhodoliths are turned more easily, therefore shortening the amount of time between turnover events. Moreover, the incidence of light is more advantageous in shallower waters where rhodoliths exhibit a greater share of their surface to diffused ambient light, thus enabling thallus growth also on the down-facing surface of the rhodoliths. In consequence, information on the frequency of hiatus formation combined with rhodolith morphology might serve as a valuable proxy for (paleo-)environmental reconstructions in respect to light availability and the hydrodynamic regime.

Study in performance and morphology of polyamide 12 produced by selective laser sintering technology

2018 ◽  
Vol 24 (5) ◽  
pp. 813-820 ◽  
Author(s):  
Junjie Wu ◽  
Xiang Xu ◽  
Zhihao Zhao ◽  
Minjie Wang ◽  
Jie Zhang
Keyword(s):  
Selective Laser Sintering ◽  
Polarized Light ◽  
Chain Scission ◽  
High Energy ◽  
Laser Sintering ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Content Type ◽  
X Ray ◽  
Polyamide 12

Purpose The purpose of this paper is to investigate the effect of selective laser sintering (SLS) method on morphology and performance of polyamide 12. Design/methodology/approach Crystallization behavior is critical to the properties of semi-crystalline polymers. The crystallization condition of SLS process is much different from others. The morphology of polyamide 12 produced by SLS technology was investigated using scanning electron microscopy, polarized light microscopy, differential scanning calorimetry, X-ray diffraction and wide-angle X-ray diffraction. Findings Too low fill laser power brought about bad fusion of powders, while too high energy input resulted in bad performance due to chain scission of macromolecules. There were three types of crystal in the raw powder material, denoted as overgrowth crystal, ring-banded spherulite and normal spherulite. Originality/value In this work, SLS samples with different sintering parameters, as well as compression molding sample for the purpose of comparison, were made to study the morphology and crystal structure of sintered PA12 in detail.

Sign in / Sign up

Export Citation Format

Share Document