Technical parameters affecting oil absorption, quality and acceptability of fry-coated peanut (Arachis hypogaea)

2020 ◽  
Vol 21 (4) ◽  
Author(s):  
B. A. Sivak ◽  
A. V. Protasov ◽  
L. A. Smirnov

The removal of slag from melt surface of hot metal and steel ladles is a necessary condition to provide a deep desulphurization and dephosphorization of hot metal and steel in the process of their processing. A review of methods of slag skimming presented, mainly based on slag mechanical shoveling and its removal out of ladles by vacuum sucking. It was shown, that manipulators design for the slag skimming working instrument moving depends on the production scale, mass of the processed heats, amount and properties of the slag to be removed, production process intensity and ecological requirements. Peculiarities of designs and technical parameters of machines for slag skimming presented, designed by Irkutsk plant of heavy machinery, Scientific and Production Enterprise n.a. M.I. Platov, VNIIMETMASH, Kuznetsk and Novolipetsk steel plants. Technological methods of control of slag composition and physical properties considered, first of all of viscosity and fluidity, which have significant effect on selection of a method of slag skimming. Advantages and drawbacks of actions, aimed at more complete slag removal from metal surface by a scraper noted including bath blowing off by an inert gas, liquid slag tapping into am intermediate settling tank following its removal into a slag bowl. In case of satisfactory fluidity it is possible to slag removal by vacuum sucking, which at the same time promoted the melt degassing. Work done in this area abroad noted. Methods of vacuum slag removal developed in the USA and Japan described.


Author(s):  
S.A. García Muñoz

Objetivo: Evaluar la germinación de cacahuate (Arachis hypogaea L.) mediante el uso de diferentes dosis de ácido giberélico (GA3). Diseño/metodología/aproximación: Se empleó un diseño completamente al azar. Se utilizaron tres tratamientos con 20 repeticiones. Tratamiento 1: 0.05gr/L de ácido giberélico (GA3), Tratamiento 2: 0.10gr/L de ácido giberélico (GA3), Tratamiento 3: 0.15gr/L de ácido giberélico (GA3) y Tratamiento 0: Testigo. Se utilizaron semillas de cacahuate de la variedad Virginia. Los parámetros a evaluar fueron, la altura de plántula, número de hojas, medida de raíz y biomasa.  Las medias fueron comparadas por la prueba de Tukey a un nivel del 5% de confianza. Resultados: Los tratamientos indicaron que el Tratamiento 0 (Testigo) obtuvo un porcentaje de germinación de 85%, siendo mayor que el tratamiento 3 (0.15gr/L de GA3) con un 75% de germinación, sin embargo, el tratamiento 1 (0.05gr/L de GA3) y 2 (0.10gr/L de GA3) presentaron una mejor respuesta al obtener un 95% de germinación cada uno. Limitaciones del estudio/implicaciones: El tratamiento 3 causa efectos negativos en la germinación de la planta. Hallazgos/conclusiones: Es necesario dar seguimiento a la investigación para un mejor control del ambiente y ampliar las dosis de GA3, así como aumentar la velocidad de germinación aplicando 0.15gr/L de GA3.


2019 ◽  
Vol 2 (2) ◽  
pp. 115-120
Author(s):  
Karissha Fritzi Della ◽  
Mutiara Pratiwi ◽  
Purwa Tri Cahyana ◽  
Maria DPT Gunawan-Puteri

Fried food is convenient for many people due to its pleasant texture and taste. On the other hand, it comes with the risk of high oil absorption which might lead to certain health problems. Resistant starch (RS) has been known to have a functionality of reducing oil absorption. Three different types of banana: Kepok (Musa paradisiaca formatypica), Raja Bulu (Musa paradisiaca L.) and Ambon (Musa paradisiaca L. var sapientum) were evaluated on its performance when utilized as source of resistant starch especially on their application in reducing oil absorption in fried food. Tempeh was used as the food model. Banana starch (RS2) was isolated through water alkaline extraction process, continued with modification process through three repeated cycles of autoclaving-cooling process to obtain the RS3. RS3 was added into the batter coating formulation at three substitution ratios (10%, 30% and 50%) and then used to coat tempeh before frying. Evaluation of resistant starch in batter and battered productwas conducted on the following parameters: fat content, water retention capacity (WRC), coating pick up and sensory analysis. The result of this study revealed that Raja Bulu showed the most effective result on reducing oil absorption in the food tested. In the three bananas used, the ratio of 50% performed best in coating pick up (highest), WRC (highest) and fat content(lowest) parameters, but not significantly different with the 30% ratio. In terms of sensory acceptance, using Raja Bulu as the selected banana type, 30% of substitution ratio was significantly more preferable by the panelists in crispness, oiliness, and overall acceptance attributes compared to control and other substitution ratios.


2001 ◽  
Vol 3 (1) ◽  
pp. 61-72 ◽  
Author(s):  
E. Diniz ◽  
C.L. Silva ◽  
M.B. Muniz ◽  
V.P. Queiroga ◽  
R.L.A. Bruno

2020 ◽  
Vol 19 (10) ◽  
pp. 1965-1986
Author(s):  
T.A. Komkina ◽  
M.A. Nikonova ◽  
M.G. Dubinina

Subject. The article analyzes development trends in certain types of service robots, namely, hybrid UAVs, bionic prosthetic hands, robotic vacuum cleaners. Objectives. We focus on identifying the main trends in the development of certain types of service robots, building dynamic models of their technical indicators and models of dependence of their price and weight on absolute characteristics and technical parameters. Methods. The study employs methods of correlation and multiple regression analysis. The data of the IFR, the Remotely Piloted Aircraft System, and websites of robot manufacturers serve as the informational basis of the paper. Results. The modeling unveils positive correlation between the integrated indicator of the technical level of hybrid UAVs of convertiplane type and the wingspan. The analysis of modern bionic prosthetic hands shows that the developers focus on optimizing the structure of the prosthetic, however, as the functions of the hand improve, the weight of bionic hand increases. The main factors influencing the price of robot vacuum cleaners are their power, weight, and operating hours. Conclusions. The unit price of a complex indicator of the technical level of hybrid UAVs is lower than the corresponding indicator of fixed-wing UAVs, reflecting a greater efficiency of hybrid UAVs. The analysis of technical indicators of robotic prosthetics (using the case of bionic hands) shows that any improvement of functional characteristics leads to deterioration of weight. The analysis of technical and economic indicators of robotic vacuum cleaners reveals a positive correlation between the price and weight, operating hours and power.


2020 ◽  
pp. 75-77
Author(s):  
Ekaterina Sergeevna Krasnikova ◽  
Natalya Lvovna Morgunova ◽  
Phelix Yakovlevich Rudik ◽  
Aleksandr Vladimirovich Krasnikov ◽  
Nikita Andreevich Semilet

The results of a study of the effect of wet ultrasonic lamb meat salting on the muscle tissue microstructure are presented, and the technical parameters of the ultrasonic device are justified. It has been established that significant destruction and swelling of muscle fibers, local destruction of the sarcolemma with its pronounced rugosity are observed at ultrasonic salting with a frequency of 35 kHz, the cross-striation is poorly expressed, the tissue structure is disturbed. An ultrasonic salting with a frequency of 26 kHz was accompanied an increase in the number of transverse microcracks and crevices, loosening of muscle fibers, the formation of cavities between them while retention of the tissue structure, which contributes to the appearance of a brine between muscle fibers and accelerates its penetration into the fiber. It allows us to recommend ultrasound at a frequency of 26 kHz for cavitation activation of the brine to intensify the technological process of lamb meat salting.


2017 ◽  
Vol 5 (3) ◽  
pp. 342
Author(s):  
Rizal Mahdi Kurniawan ◽  
Heni Purnamawati ◽  
Yudiwanti Wahyu E. K

<p><em>Penelitian ini bertujuan untuk mempelajari pengaruh sistem tanam alur dan pemberian jenis pupuk terhadap pertumbuhan dan produksi kacang tanah (Arachis hypogaea L.). Penelitian dilaksanakan di KP Leuwikopo IPB Dramaga, Bogor pada bulan Februari - Juni 2013. Percobaan menggunakan rancangan petak terbagi (Split Plot Design) dengan perlakuan terdiri dari dua faktor, yaitu sistem tanam alur sebagai petak utama dan jenis pupuk sebagai anak petak. Hasil penelitian menunjukkan bahwa perlakuan sistem tanam alur meningkatkan daya hasil pada produktivitas biji kering, produktivitas polong kering, dan bobot kering biji per tanaman lebih baik dibandingkan sistem tanam konvensional. Hal tersebut ditunjukkan dengan perlakuan sistem tanam alur yang memiliki produktivitas 2.93 ton/ha polong kering, sedangkan sistem tanam konvensional sebesar 2.55 ton/ha polong kering. Sistem budidaya kacang tanah pada sistem tanam alur dapat meningkatkan efisiensi tanaman dalam memanfaatkan unsur hara yang telah diberikan baik pupuk organik maupun anorganik, sehingga pertumbuhan dan hasil tanaman kacang tanah menjadi lebih baik. Pemberian jenis pupuk kandang ayam + Dolomit + NPK memberikan respon terhadap pertumbuhan dan  daya hasil rata-rata tanaman yang lebih baik dibandingkan jenis pupuk lainnya.</em></p>


Sign in / Sign up

Export Citation Format

Share Document