Establishment of a resazurin-based aortic valve tissue viability assay for dynamic culture in a microphysiological system

2021 ◽  
pp. 1-12
Author(s):  
C. Dittfeld ◽  
M. Winkelkotte ◽  
S. Behrens ◽  
F. Schmieder ◽  
A. Jannasch ◽  
...  
Keyword(s):  
Aortic Valve ◽  
Dynamic Condition ◽  
Thermoplastic Polyurethane ◽  
Membrane Integrity ◽  
Tissue Viability ◽  
Preliminary Results ◽  
Dynamic Culture ◽  
Resazurin Assay ◽  
Static Conditions

BACKGROUND/AIM: Tissue pathogenesis of aortic valve (AV) stenosis is research focus in cardiac surgery. Model limitations of conventional 2D culture of human or porcine valvular interstitial/endothelial cells (VIC/VECs) isolated from aortic valve tissues but also limited ability of (small) animal models to reflect human (patho)physiological situation in AV position raise the need to establish an in vitro setup using AV tissues. Resulting aim is to approximate (patho)physiological conditions in a dynamic pulsatile Microphysiological System (MPS) to culture human and porcine AV tissue with preservation of tissue viability but also defined ECM composition. MATERIALS/METHODS: A tissue incubation chamber (TIC) was designed to implement human or porcine tissues (3×5 mm) in a dynamic pulsatile culture in conventional cell culture ambience in a MPS. Cell viability assays based on lactate dehydrogenase (LDH)-release or resazurin-conversion were tested for applicability in the system and applied for a culture period of 14 days with interval evaluation of tissue viability on every other day. Resazurin-assay setup was compared in static vs. dynamic culture using varying substance saturation settings (50–300μM), incubation times and tissue masses and was consequently adapted. RESULTS: Sterile dynamic culture of human and porcine AV tissue segments was established at a pulsatile flow rate range of 0.9–13.4μl/s. Implementation of tissues was realized by stitching the material in a thermoplastic polyurethane (TPU) –ring and insertion in the TIC-MPS-system. Culture volume of 2 ml caused LDH dilution not detectable in standard membrane integrity assay setup. Therefore, detection of resazurin-conversion of viable tissue was investigated. Optimal incubation time for viability conversion was determined at two hours at a saturated concentration of 300μM resazurin. Measurement in static conditions was shown to offer comparable results as dynamic condition but allowing optimal handling and TIC sterilization protocols for long term culture. Preliminary results revealed favourable porcine AV tissue viability over a 14 day period confirmed via resazurin-assay comparing statically cultured tissue counterparts. CONCLUSIONS: Human and porcine AV tissue can be dynamically cultured in a TIC-MPS with monitoring of tissue viability using an adapted resazurin-assay setup. Preliminary results reveal advantageous viability of porcine AV tissues after dynamic TIC-MPS culture compared to static control.

scholarly journals Culture of equine fibroblast-like synoviocytes on synthetic tissue scaffolds towards meniscal tissue engineering: a preliminary cell-seeding study

2014 ◽  
Author(s):  
Jennifer J Warnock ◽  
Derek B Fox ◽  
Aaron M Stoker ◽  
Mark Beatty ◽  
Mary K Cockrell ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Culture Conditions ◽  
Confocal Laser ◽  
Sulfated Glycosaminoglycan ◽  
Dynamic Culture ◽  
Meniscal Tissue ◽  
Static Conditions ◽  
Fibroblast Like Synoviocytes

Introduction: Tissue Engineering is a new methodology for addressing meniscal injury or loss. Synovium may be an ideal source of cells for in vitro meniscal fibrocartilage formation, however, favorable in vitro culture conditions for synovium must be established in order to achieve this goal. The objective of this study was to determine cellularity, cell distribution, and extracellular matrix (ECM) formation of equine fibroblast-like synoviocytes (FLS) cultured on synthetic scaffolds, for potential application in synovium-based meniscal tissue engineering. Scaffolds included open-cell poly-L-lactic acid (OPLA) sponges and polyglycolic acid (PGA) scaffolds cultured in static and dynamic culture conditions, and PGA scaffolds coated in poly-L-lactic (PLLA) in dynamic culture conditions. Materials and Methods: Equine FLS were seeded on OPLA and PGA scaffolds, and cultured in a static environment or in a rotating bioreactor for 12 days. Equine FLS were also seeded on PGA scaffolds coated in 2% or 4% PLLA and cultured in a rotating bioreactor for 14 and 21 days. Three scaffolds from each group were fixed, sectioned and stained with Masson’s Trichrome, Safranin-O, and Hematoxylin and Eosin, and cell numbers and distribution were analyzed using computer image analysis. Three PGA and OPLA scaffolds from each culture condition were also analyzed for extracellular matrix (ECM) production via di-methylmethylene blue (sulfated glycosaminoglycan) assay and hydroxyproline (collagen) assay. PLLA coated PGA scaffolds were analyzed using double stranded DNA quantification as a reflection of cellularity and confocal laser microscopy in a fluorescent cell viability assay. Results: The highest cellularity occurred in PGA constructs cultured in a rotating bioreactor, which also had a mean sulfated glycosaminoglycan content of 22.3μg per scaffold. PGA constructs cultured in static conditions had the lowest cellularity. Cells had difficulty adhering to OPLA and the PLLA coating of PGA scaffolds; cellularity was inversely proportional to the concentration of PLLA used. PLLA coating did not prevent dissolution of the PGA scaffolds. All cell scaffold types and culture conditions produced non-uniform cellular distribution. Discussion/ Conclusion: FLS-seeding of PGA scaffolds cultured in a rotating bioreactor resulted in the most optimal cell and matrix characteristics seen in this study. Cells grew only in the pores of the OPLA sponge, and could not adhere to the PLLA coating of PGA scaffold, due to the hydrophobic property of PLA. While PGA culture in a bioreactor produced measureable GAG, no culture technique produced visible collagen. For this reason, and due to the dissolution of PGA scaffolds, the culture conditions and scaffolds described here are not recommended for inducing fibrochondrogenesis in equine FLS for meniscal tissue engineering.

scholarly journals Culture of equine fibroblast-like synoviocytes on synthetic tissue scaffolds towards meniscal tissue engineering: a preliminary cell-seeding study

2014 ◽  
Author(s):  
Jennifer J Warnock ◽  
Derek B Fox ◽  
Aaron M Stoker ◽  
Mark Beatty ◽  
Mary K Cockrell ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Culture Conditions ◽  
Confocal Laser ◽  
Sulfated Glycosaminoglycan ◽  
Dynamic Culture ◽  
Meniscal Tissue ◽  
Static Conditions ◽  
Fibroblast Like Synoviocytes

Introduction: Tissue Engineering is a new methodology for addressing meniscal injury or loss. Synovium may be an ideal source of cells for in vitro meniscal fibrocartilage formation, however, favorable in vitro culture conditions for synovium must be established in order to achieve this goal. The objective of this study was to determine cellularity, cell distribution, and extracellular matrix (ECM) formation of equine fibroblast-like synoviocytes (FLS) cultured on synthetic scaffolds, for potential application in synovium-based meniscal tissue engineering. Scaffolds included open-cell poly-L-lactic acid (OPLA) sponges and polyglycolic acid (PGA) scaffolds cultured in static and dynamic culture conditions, and PGA scaffolds coated in poly-L-lactic (PLLA) in dynamic culture conditions. Materials and Methods: Equine FLS were seeded on OPLA and PGA scaffolds, and cultured in a static environment or in a rotating bioreactor for 12 days. Equine FLS were also seeded on PGA scaffolds coated in 2% or 4% PLLA and cultured in a rotating bioreactor for 14 and 21 days. Three scaffolds from each group were fixed, sectioned and stained with Masson’s Trichrome, Safranin-O, and Hematoxylin and Eosin, and cell numbers and distribution were analyzed using computer image analysis. Three PGA and OPLA scaffolds from each culture condition were also analyzed for extracellular matrix (ECM) production via di-methylmethylene blue (sulfated glycosaminoglycan) assay and hydroxyproline (collagen) assay. PLLA coated PGA scaffolds were analyzed using double stranded DNA quantification as a reflection of cellularity and confocal laser microscopy in a fluorescent cell viability assay. Results: The highest cellularity occurred in PGA constructs cultured in a rotating bioreactor, which also had a mean sulfated glycosaminoglycan content of 22.3μg per scaffold. PGA constructs cultured in static conditions had the lowest cellularity. Cells had difficulty adhering to OPLA and the PLLA coating of PGA scaffolds; cellularity was inversely proportional to the concentration of PLLA used. PLLA coating did not prevent dissolution of the PGA scaffolds. All cell scaffold types and culture conditions produced non-uniform cellular distribution. Discussion/ Conclusion: FLS-seeding of PGA scaffolds cultured in a rotating bioreactor resulted in the most optimal cell and matrix characteristics seen in this study. Cells grew only in the pores of the OPLA sponge, and could not adhere to the PLLA coating of PGA scaffold, due to the hydrophobic property of PLA. While PGA culture in a bioreactor produced measureable GAG, no culture technique produced visible collagen. For this reason, and due to the dissolution of PGA scaffolds, the culture conditions and scaffolds described here are not recommended for inducing fibrochondrogenesis in equine FLS for meniscal tissue engineering.

scholarly journals Using a micro-physiological system to prolong the preservation of ex vivo lung tissue

2021 ◽  
Vol 7 (2) ◽  
pp. 207-210
Author(s):  
Sebastian Böhlen ◽  
Sebastian Konzok ◽  
Jennifer Labisch ◽  
Susann Dehmel ◽  
Dirk Schaudien ◽  
...  
Keyword(s):  
Lung Tissue ◽  
Ex Vivo ◽  
Membrane Integrity ◽  
Lactate Dehydrogenase Release ◽  
Repeated Dose Toxicity ◽  
Prolonged Culture ◽  
Static Conditions ◽  
Precision Cut Lung Slices

Abstract Current in vitro and in vivo disease models have been reported to lack sufficient translation to human. Precision-Cut Lung Slices (PCLS) are viable sections of lung tissue and have been described to be a translational model for the ex vivo assessment of pharmacological and toxicological compounds. In most studies PCLS were cultured under static conditions. These lung sections, however, suffer from the limited viability. Here we present a novel modular microphysiological system (MPS) to prolong the cultivation of ex vivo lung tissue. A tailored MPS setup was designed using the PDMS free modular plug&play MPS construction kit. PCLS from mice were cultivated for up to one week under static versus perfused conditions. Using the MPS technology enabled a prolonged culture period with improved viability as shown by lowered lactate dehydrogenase release and improved membrane integrity. Using this technology might allow us to use PCLS for longer culture periods such as e.g. repeated dose toxicity or pharmacology studies.

scholarly journals Online Measurement System for Dynamic Flow Bioreactors to Study Barrier Integrity of hiPSC-Based Blood–Brain Barrier In Vitro Models

2022 ◽  
Vol 9 (1) ◽  
pp. 39
Author(s):  
Jihyoung Choi ◽  
Sanjana Mathew ◽  
Sabrina Oerter ◽  
Antje Appelt-Menzel ◽  
Jan Hansmann ◽  
...  
Keyword(s):  
Blood Brain Barrier ◽  
In Vitro Models ◽  
Brain Barrier ◽  
Barrier Integrity ◽  
Non Invasive ◽  
Dynamic Culture ◽  
Blood Brain ◽  
Bioreactor System ◽  
Static Conditions

Electrochemical impedance spectroscopy (EIS) is a noninvasive, reliable, and efficient method to analyze the barrier integrity of in vitro tissue models. This well-established tool is used most widely to quantify the transendothelial/epithelial resistance (TEER) of Transwell-based models cultured under static conditions. However, dynamic culture in bioreactors can achieve advanced cell culture conditions that mimic a more tissue-specific environment and stimulation. This requires the development of culture systems that also allow for the assessment of barrier integrity under dynamic conditions. Here, we present a bioreactor system that is capable of the automated, continuous, and non-invasive online monitoring of cellular barrier integrity during dynamic culture. Polydimethylsiloxane (PDMS) casting and 3D printing were used for the fabrication of the bioreactors. Additionally, attachable electrodes based on titanium nitride (TiN)-coated steel tubes were developed to perform EIS measurements. In order to test the monitored bioreactor system, blood–brain barrier (BBB) in vitro models derived from human-induced pluripotent stem cells (hiPSC) were cultured for up to 7 days. We applied equivalent electrical circuit fitting to quantify the electrical parameters of the cell layer and observed that TEER gradually decreased over time from 2513 Ω·cm2 to 285 Ω·cm2, as also specified in the static control culture. Our versatile system offers the possibility to be used for various dynamic tissue cultures that require a non-invasive monitoring system for barrier integrity.

A new technique in sutureless aortic valve replacement–preliminary results

2008 ◽  
Vol 56 (S 1) ◽  
Author(s):  
I Breitenbach ◽  
A El-Essawi ◽  
U Carstens-Fitz ◽  
MB Anssar ◽  
W Ahl ◽  
...  
Keyword(s):  
Aortic Valve ◽  
Aortic Valve Replacement ◽  
Valve Replacement ◽  
New Technique ◽  
Preliminary Results ◽  
A New Technique

PERFUSION OF OVARIES IN VITRO AND IN VIVO

1972 ◽  
Vol 68 (2_Supplb) ◽  
pp. S285-S309 ◽  
Author(s):  
Kurt Ahrén ◽  
Per Olof Janson ◽  
Gunnar Selstam
Keyword(s):  
Perfusion System ◽  
Perfusion Technique ◽  
Preliminary Results ◽  
Advantages And Disadvantages

ABSTRACT This paper discusses in vivo and in vitro ovarian perfusion systems described so far in the literature. The interest is not focussed primarily on the results of these studies but rather on the advantages and disadvantages of the techniques and methods used. Another part of the paper summarizes the points which are most important, in our opinion, to take into consideration when developing an in vitro perfusion technique of the ovary. The last part of the paper gives a description of and some preliminary results from an in vitro perfusion system of the rabbit ovary which is under development in this laboratory.

IMPACT OF SORBITOL- INDUCED OSMOTIC STRESS ON SOME BIOCHEMICAL TRAITS OF POTATO IN VITRO

2020 ◽  
Vol 51 (4) ◽  
pp. 1038-1047
Author(s):  
Mawia & et al.
Keyword(s):  
Ascorbic Acid ◽  
Osmotic Stress ◽  
Cytoplasmic Membrane ◽  
Genotypic Variation ◽  
Membrane Damage ◽  
Membrane Integrity ◽  
Culture Collection ◽  
Nutritive Medium ◽  
Starting Point

This study had as principal objective identification of osmotic-tolerant potato genotypes by using "in vitro" tissue culture and sorbitol as a stimulating agent, to induce water stress, which was added to the  culture nutritive medium in different concentration (0,50, 110, 220, 330 and 440 mM).  The starting point was represented by plantlets culture collection, belonging to eleven potato genotypes: Barcelona, Nectar, Alison, Jelly, Malice, Nazca, Toronto, Farida, Fabulla, Colomba and Spunta. Plantlets were multiplied between two internodes to obtain microcuttings (in sterile condition), which were inoculated on medium. Sorbitol-induced osmotic stress caused a significant reduction in the ascorbic acid, while the concentration of proline, H2O2 and solutes leakage increased compared with the control. Increased the proline content prevented lipid peroxidation, which played a pivotal role in the maintenance of membrane integrity under osmotic stress conditions. The extent of the cytoplasmic membrane damage depends on osmotic stress severity and the genotypic variation in the maintenance of membranes stability was highly associated with the ability of producing more amounts of osmoprotectants (proline) and the non-enzymic antioxidant ascorbic acid in response to osmotic stress level. The results showed that the genotypes Jelly, Nectar, Allison, Toronto, and Colomba are classified as highly osmotic stress tolerant genotypes, while the genotypes Nazca and Farida are classified as osmotic stress susceptible ones.

Analysis of the Dynamics of the Electric Capacitance of a Cell Monolayer at the Late Stages of Caco-2 cell Differentiation

2019 ◽  
Vol 35 (6) ◽  
pp. 87-90
Author(s):  
S.V. Nikulin ◽  
V.A. Petrov ◽  
D.A. Sakharov
Keyword(s):  
Impedance Spectroscopy ◽  
Cell Monolayer ◽  
Microfluidic Chips ◽  
Russian Science ◽  
Electric Capacitance ◽  
A Cell ◽  
Static Conditions ◽  
Late Stages

The real-time monitoring of electric capacitance (impedance spectroscopy) allowed obtaining evidence that structures which look like intestinal villi can be formed during the cultivation under static conditions as well as during the cultivation in microfluidic chips. It was shown in this work via transcriptome analysis that the Hh signaling pathway is involved in the formation of villus-like structures in vitro, which was previously shown for their formation in vivo. impedance spectroscopy, intestine, villi, electric capacitance, Hh The study was funded by the Russian Science Foundation (Project 16-19-10597).

Improved Production of Two Anti-Candida Lipopeptide Homologues Co- Produced by the Wild-Type Bacillus subtilis RLID 12.1 under Optimized Conditions

2020 ◽  
Vol 21 (5) ◽  
pp. 438-450
Author(s):  
Ramya Ramchandran ◽  
Swetha Ramesh ◽  
Anviksha A ◽  
RamLal Thakur ◽  
Arunaloke Chakrabarti ◽  
...  
Keyword(s):  
Bacillus Subtilis ◽  
Pathogenic Fungi ◽  
Fold Increase ◽  
Production Yield ◽  
Yield Enhancement ◽  
Bioactive Metabolites ◽  
Candida Auris ◽  
Media Formulation ◽  
Static Conditions

Background:: Antifungal cyclic lipopeptides, bioactive metabolites produced by many species of the genus Bacillus, are promising alternatives to synthetic fungicides and antibiotics for the biocontrol of human pathogenic fungi. In a previous study, the co- production of five antifungal lipopeptides homologues (designated as AF1, AF2, AF3, AF4 and AF5) by the producer strain Bacillus subtilis RLID 12.1 using unoptimized medium was reported; though the two homologues AF3 and AF5 differed by 14 Da and in fatty acid chain length were found effective in antifungal action, the production/ yield rate of these two lipopeptides determined by High-Performance Liquid Chromatography was less in the unoptimized media. Methods:: In this study, the production/yield enhancement of the two compounds AF3 and AF5 was specifically targeted. Following the statistical optimization (Plackett-Burman and Box-Behnken designs) of media formulation, temperature and growth conditions, the production of AF3 and AF5 was improved by about 25.8- and 7.4-folds, respectively under static conditions. Results:: To boost the production of these two homologous lipopeptides in the optimized media, heat-inactivated Candida albicans cells were used as a supplement resulting in 34- and 14-fold increase of AF3 and AF5, respectively. Four clinical Candida auris isolates had AF3 and AF5 MICs (100 % inhibition) ranging between 4 and 16 μg/ml indicating the lipopeptide’s clinical potential. To determine the in vitro pharmacodynamic potential of AF3 and AF5, time-kill assays were conducted which showed that AF3 (at 4X and 8X concentrations) at 48h exhibited mean log reductions of 2.31 and 3.14 CFU/ml of C. albicans SC 5314, respectively whereas AF5 at 8X concentration showed a mean log reduction of 2.14 CFU/ml. Conclusion:: With the increasing threat of multidrug-resistant yeasts and fungi, these antifungal lipopeptides produced by optimized method promise to aid in the development of novel antifungal that targets disease-causing fungi with improved efficacy.

Sign in / Sign up

Export Citation Format

Share Document