scholarly journals Surface modification of titanium dioxide nanotubes with sulfur for highly efficient photocatalytic performance under visible light irradiation

2018 ◽  
Vol 21 (3) ◽  
pp. 98-105 ◽  
Author(s):  
Ton Nu Quynh Trang ◽  
Le Thi Ngoc Tu ◽  
Co Le Thanh Tuyen ◽  
Tran Van Man ◽  
Vu Thi Hanh Thu
Keyword(s):  
Titanium Dioxide ◽  
Visible Light ◽  
Uv Light ◽  
Critical Role ◽  
Treatment Temperature ◽  
Chemical Components ◽  
X Ray ◽  
Transmission Electron ◽  
Tio2 Nts ◽  
Modification Of Titanium

In this paper, the surface of titanium dioxide (TiO2) nanotubes (NTs) was decorated with sulfur by impregnation procedure. The crystalline structure and morphology of the S-TiO2 NT hybrid catalyst were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The chemical components of S-TiO2 NT-1 sample were analyzed by energy dispersive X-ray (EDX). The results showed that sulfur impurities were incorporated into TiO2 crystal structure and decorated on its surface due to the heat treatment temperature used throughout the fabrication process. Moreover, its photocatalytic reaction was evaluated by change of adsorption intensity of methyl orange (MO) aqueous solution at wavelength of 467 nm. This work revealed that the sulfur loaded onto TiO2 NT nanostructures exhibited excellent photocatalytic efficacy for the degradation of the MO dye compared with pristine TiO2 NTs (93.12 ± 0.02% and 80.21 ± 0.04% MO degradation efficacy under UV light versus visible-light regime, respectively, after 180 minutes). This was mainly governed by sulfur ions modified on the surface of TiO2 NTs which played a critical role in promoting the separation rate of photo-induced charge carriers.  

Green synthesized Ag-TiO2 for degradation of organic dye through visible light driven photo-reactor and its kinetics

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Titikshya Mohapatra ◽  
Sakshi Manekar ◽  
Vijyendra Kumar Sahu ◽  
Ashwini Kumar Soni ◽  
Sudip Banerjee ◽  
...  
Keyword(s):  
Visible Light ◽  
Mangifera Indica ◽  
Band Gap Energy ◽  
Photo Degradation ◽  
X Ray ◽  
Green Approach ◽  
Vis Spectroscopy ◽  
Rate Of Reaction ◽  
Visible Light Driven ◽  
Modification Of Titanium

Abstract This study reports a green approach for the modification of titanium dioxide (TiO2) nanoparticles with immobilization of silver nanoparticles. One of the natural sources i.e., Mangifera indica leaf extract was utilized as reducing and capping agent for the fabrication of Ag-TiO2 nanocatalyst. Further, the surface morphology and band-gap energy of prepared Ag-TiO2 were analyzed by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and UV–Vis spectroscopy. Also, it was characterized by X-ray Powder Diffraction (XRD) which provides the information regarding the crystallinity of the Ag-TiO2. Subsequently, photo activity of Ag-TiO2 was investigated for the degradation of methylene blue (MB) dye wastewater through visible light driven photoreactor. The Ag-TiO2 provided highest (68%) of photo-degradation efficiency within 110 min for 7.81 × 10−5 mol/L initial MB concentration at pH 8 by using 0.19 g/L photocatalyst. Further, addition of 10 mM H2O2 boost up the MB photodegradation to 74%. The kinetic study confirmed the MB degradation followed first order rate of reaction.

scholarly journals Controlled Synthesis of CuS and Cu9S5 and Their Application in the Photocatalytic Mineralization of Tetracycline

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 899
Author(s):  
Murendeni P. Ravele ◽  
Opeyemi A. Oyewo ◽  
Damian C. Onwudiwe
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Blue Shift ◽  
X Ray Diffraction ◽  
X Ray ◽  
Copper Sulfides ◽  
Transmission Electron ◽  
Single Source Precursor ◽  
Pure Phase ◽  
Pure Phases

Pure-phase Cu2−xS (x = 1, 0.2) nanoparticles have been synthesized by the thermal decomposition of copper(II) dithiocarbamate as a single-source precursor in oleylamine as a capping agent. The compositions of the Cu2−xS nanocrystals varied from CuS (covellite) through the mixture of phases (CuS and Cu7.2S4) to Cu9S5 (digenite) by simply varying the temperature of synthesis. The crystallinity and morphology of the copper sulfides were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which showed pure phases at low (120 °C) and high (220 °C) temperatures and a mixture of phases at intermediate temperatures (150 and 180 °C). Covellite was of a spherical morphology, while digenite was rod shaped. The optical properties of these nanocrystals were characterized by UV−vis–NIR and photoluminescence spectroscopies. Both samples had very similar absorption spectra but distinguishable fluorescence properties and exhibited a blue shift in their band gap energies compared to bulk Cu2−xS. The pure phases were used as catalysts for the photocatalytic degradation of tetracycline (TC) under visible-light irradiation. The results demonstrated that the photocatalytic activity of the digenite phase exhibited higher catalytic degradation of 98.5% compared to the covellite phase, which showed 88% degradation within the 120 min reaction time using 80 mg of the catalysts. The higher degradation efficiency achieved with the digenite phase was attributed to its higher absorption of the visible light compared to covellite.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

FeYO3@rGO nanocomposites: Synthesis, characterization and application in photooxidative degradation of atrazine under visible light

2021 ◽  
Vol 11 (5) ◽  
pp. 706-716
Author(s):  
Nada D. Al-Khthami ◽  
Tariq Altalhi ◽  
Mohammed Alsawat ◽  
Mohamed S. Amin ◽  
Yousef G. Alghamdi ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Structural Surface ◽  
Adsorption Desorption

Different organic pollutants have been remediated photo catalytically by applying perovskite photocatalysts. Atrazine (ATR) is a pesticide commonly detected as a pollutant in drinking, surface and ground water. Herein, FeYO3@rGO heterojunction was synthesized and applied for photooxidation decomposition of ATR. First, FeYO 3nanoparticles (NPs) were prepared via routine sol-gel. After that, FeYO3 NPs were successfully incorporated with different percentages (5, 10, 15 and 20 wt.%) of reduced graphene oxide (rGO) in the synthesis of novel FeYO3@rGO photocatalyst. Morphological, structural, surface, optoelectrical and optical characteristics of constructed materials were identified via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), adsorption/desorption isotherms, diffusive reflectance (DR) spectra, and photoluminescence response (PL). Furthermore, photocatalytic achievement of the constructed materials was evaluated via photooxidative degradation of ATR. Various investigations affirmed the usefulness of rGO incorporation on the advancement of formed photocatalysts. Actually, novel nanocomposite containing rGO (15 wt.%) possessed diminished bandgap energy, as well as magnified visible light absorption. Furthermore, such nanocomposite presented exceptional photocatalytic achievement when exposed to visible light as ATR was perfectly photooxidized over finite amount (1.6 g · L-1) from the optimized photocatalyst when illuminated for 30 min. The advanced photocatalytic performance of constructed heterojunctions could be accredited mainly to depressed recombination amid induced charges. The constructed FeYO3@rGO nanocomposite is labelled as efficient photocatalyst for remediation of herbicides from aquatic environments.

scholarly journals Visible Light-Induced Superior Photocatalytic Activity of Ag@Nd2WO6/ZnO Nanocomposite and its Biological Activity

2019 ◽  
Vol 9 (2S2) ◽  
pp. 232-236
Keyword(s):  
Antibacterial Activity ◽  
Visible Light ◽  
Uv Light ◽  
Uv Spectroscopy ◽  
Photocatalytic Process ◽  
Spectroscopy Technique ◽  
Phase Purity ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Catalytic Material

In this work, degradation of Ciprofloxacin has been studied over the catalyst Ag@Nd2WO6/ZnO (ANWZ) synthesized via hydrothermal method. The catalysts are characterized with techniques such as X-ray diffractometer, Scanning electron microscope with EDX spectroscopy and DRS- UV spectroscopy respectively. For the results shows, the PXRD spectroscopy was confirmed a phase purity and crystalline structure of the as-synthesized catalyst. The SEM results are explained about the morphology structure of the material, the structure spherical with nanorod like clustered morphology structure was shown in SEM and the reacting elements in the catalytic material are confirmed by EDX spectroscopy. And the DRS-UV spectroscopy technique is telling about the band energy value for prepared materials and also select the suitable way (i.e: Visible or UV light irradiation) for the degradation. The photocatalytic process, Ciprofloxacin (CIP) drug are degraded under visible light within 140 minutes and the degradation efficiency are 95.54%. The reusability test explains the efficiency and stability of the ANWZ catalyst and its stable up to the fifth run. Further, the photodegradation process, the catalyst is tested antibacterial activity study against Bacillus cereus and Escherichia Coli bacterial organisms. From the result, Bacillus bacteria contain more efficient antibacterial activity than that of E.coli bacteria

Effect of Sonication Time and Calcination Temperature on Physical Properties of Titanium Dioxide Synthesized via Sonochemical-Assisted Process

2013 ◽  
Vol 802 ◽  
pp. 252-256 ◽  
Author(s):  
Chokchai Kahattha ◽  
Naratip Vittayakorn ◽  
Wisanu Pecharapa
Keyword(s):  
Titanium Dioxide ◽  
Electron Microscope ◽  
Titanium Dioxide Nanoparticles ◽  
Anatase Phase ◽  
Titanium Isopropoxide ◽  
Treatment Temperature ◽  
Sonication Time ◽  
X Ray Diffraction ◽  
Calcination Process ◽  
Transmission Electron

Titanium dioxide nanoparticles (TiO2) were successfully synthesized via a sonochemical-assisted process using titanium isopropoxide as the titanium sources and calcination process at 300-500 °C. The effect of sonication time and heat treatment temperature on structural and nanostructure properties of the nanoparticles were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM) and transmission electron microscope (TEM). The XRD and Raman results indicated that the crystalline of as-sonochemically synthesized TiO2 nanoparticles corresponded to anatase phase of TiO2 after sonication for 30 mim. The high quality crystalline anatase phase and increasing of crystalline size can be obtained after calcinations process.

Ag2O/ZnO Heterostructures with Enhanced Photocatalytic Activity

2021 ◽  
Vol 1035 ◽  
pp. 1043-1049
Author(s):  
Di Xiang ◽  
Chang Long Shao
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Visible Light Irradiation ◽  
Environmental Remediation ◽  
Organic Dyes ◽  
Light Irradiation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
P Type

A simple route has been developed for the synthesis of Ag2O/ZnO heterostructures and the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and photoluminescence (PL) spectroscopy analysis. Considering the porous structure of Ag2O/ZnO, the photocatalytic degradation for the organic dyes, such as eosin red (ER), methyl orange (MO), methylene blue (MB) and rhodamine B (RhB), under visible light irradiation was investigated in detail. Noticeably, Ag2O/ZnO just took 40 min to degrade 96 % MB. The rate of degradation using the Ag2O/ZnO heterostructures was 2.3 times faster than that of the bare porous ZnO nanospheres under visible light irradiation due to that the recombination of the photogenerated charge was inhibited greatly in the p-type Ag2O and n-type ZnO semiconductor. So the Ag2O/ZnO heterostuctures showed the potential application on environmental remediation.

scholarly journals Photocatalytic Activity of Monosized AuZnO Composite Nanoparticles

2018 ◽  
Vol 9 (1) ◽  
pp. 111 ◽  
Author(s):  
Chenguang Ma ◽  
Xianhong Wang ◽  
Shixia Zhan ◽  
Xuemei Li ◽  
Xiao Liu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Ethylene Glycol ◽  
Visible Light ◽  
Composite Nanoparticles ◽  
Narrow Particle Size Distribution ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Suitable Amount ◽  
Copolymer Poly

Photocatalytic activity of monosized AuZnO composite nanoparticles with different compositions were synthesized by the one-pot polyol procedure, using the triblock copolymer poly(ethylene glycol)-block-poly(propylene glycol)-blockpoly(ethylene glycol) (PEO-PPO-PEO) as the surfactant. The structure and morphology of the composite nanoparticles were analyzed by X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), selected area electron diffraction (SAED), a transmission electron microscope (TEM) and high resolution transmission electron microscopy (HRTEM). The characterization showed that the AuZnO composite nanoparticles were spherical, with narrow particle size distribution and high crystallinity. The Fourier transform infrared spectroscopy (FTIR) study confirms the PEO-PPO-PEO molecules on the surface of the composite nanoparticles. The investigations by ultraviolet-visible light absorbance spectrometer (UV-Vis) and photoluminescence spectrophotometer (PL) demonstrate well the dispersibility and excellent optical performance of the AuZnO composite nanoparticles. Photocatalytic activity and reusability of the AuZnO nanoparticles in UV and visible light regions was evaluated by the photocatalytic degradation of Rhodamine B (RhB). The experimental results show that the AuZnO composite nanoparticles with a suitable amount of Au loading have stability and improved photocatalytic activity. AuZnO composite nanoparticles are effective and stable for the degradation of organic pollutants in aqueous solution.

scholarly journals Visible-Light-Driven Photocatalytic Activity of Magnetic BiOBr/SrFe12O19 Nanosheets

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 735 ◽  
Author(s):  
Taiping Xie ◽  
Jiao Hu ◽  
Jun Yang ◽  
Chenglun Liu ◽  
Longjun Xu ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Electron Microscope ◽  
Visible Light ◽  
Uv Light ◽  
Light Emitting Diode ◽  
Active Species ◽  
Composite Catalyst ◽  
Light Emitting ◽  
Transmission Electron ◽  
Visible Light Driven

Magnetic BiOBr/SrFe12O19 nanosheets were successfully synthesized using the hydrothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and UV-visible diffused reflectance spectra (UV-DRS), and the magnetic properties were tested using a vibration sample magnetometer (VSM). The as-produced composite with an irregular flaky-shaped aggregate possesses a good anti-demagnetization ability (Hc = 861.04 G) and a high photocatalytic efficiency. Under visible light (λ > 420 nm) and UV light-emitting diode (LED) irradiation, the photodegradation rates of Rhodamine B (RhB) using BiOBr/SrFe12O19 (5 wt %) (BOB/SFO-5) after 30 min of reaction were 97% and 98%, respectively, which were higher than that using BiOBr (87%). The degradation rate of RhB using the recovered BiOBr/5 wt % SrFe12O19 (marked as BOB/SFO-5) was still more than 85% in the fifth cycle, indicating the high stability of the composite catalyst. Meanwhile, after five cycles, the magnetic properties were still as stable as before. The radical-capture experiments proved that superoxide radicals and holes were main active species in the photocatalytic degradation of RhB.

Synthesis and characterization of novel poly(HAzPMA-co-SA)/RDX/CdS nanocomposite as a polymer bonded explosive

2020 ◽  
Vol 98 (12) ◽  
pp. 755-763
Author(s):  
Hamid Reza Ghayeni ◽  
Reza Razeghi ◽  
Abolfazl Olyaei
Keyword(s):  
Uv Light ◽  
Light Exposure ◽  
Sodium Acrylate ◽  
Spectroscopic Techniques ◽  
Effective Parameters ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cds Nanorods ◽  
Transmission Electron

Cadmium sulfide nanorods with a length of 69 nm have been prepared by using Cd(OAc)2.2H2O and S8 at 125 °C in the presence of triethylenetetramine as the template agent and coordination agent and characterized by using X-ray diffraction, transmission electron microscopy, FTIR, photoluminescence, and UV–vis absorption spectroscopic techniques. Photocopolymerization of glycidyl methacrylate (GMA) and sodium acrylate (SA) was carried out using CdS nanorods as a photocatalyst under UV light exposure at 400 nm in the presence of β-cyclodextrin (β-CD). To optimization of the effective parameters on the synthesis of copolymer nanocomposite, the amounts of initiator, monomers, and β-CD, duration of pre-deoxygenation, and light wavelength were evaluated. Ring opening of poly(GMA-co-SA)/CdS nanocomposite with NaN3 afforded poly(HAzPMA-co-SA)/CdS nanocomposite and subsequent mixing with RDX in DMF led to the formation of poly(HAzPMA-co-SA)/RDX/CdS nanocomposite as a polymer bonded explosive. All of the copolymer nanocomposites were characterized using various tools of instrumental analysis.

Sign in / Sign up

Export Citation Format

Share Document