scholarly journals Reduction of dielectric oil present in Fuller soil by applying Micro-nanobubbles of air at laboratory level

2018 ◽  
Vol 2 (2) ◽  
pp. 29
Author(s):  
Daniel Castillo Anyosa ◽  
Jhonny Valverde Flores
Keyword(s):  
Research Work ◽  
Sample Number ◽  
Total Hydrocarbons

The present research consisted of reducing the presence of dielectric oil in fuller ground by using air micro-nanobubbles at laboratory level. Weighed 3 containers 500 grams of soil with dielectric oil in each. After 48 hours the treatment with air micro-nanobubbles was carried out. It was taken to the laboratory to measure the parameters: pH, CE, mv and T in 30, 60, and 90 minutes after total hydrocarbons were analyzed. The best result was sample number 3 with a time of 90 minutes with a 59.6% reduction in the presence of dielectric oil, considered significant for the research work.

scholarly journals Photocatalytic degradation of hydrocarbons present in water, using Fe (III) modified TiO2

2019 ◽  
Vol 9 (1) ◽  
pp. 105-109
Author(s):  
Paula Catalina Velosa- Alfonso ◽  
Andrés Felipe Loaiza- Carreño, ◽  
Cesar Augusto Quiñones- Segura
Keyword(s):  
Titanium Dioxide ◽  
Produced Water ◽  
Research Work ◽  
Oil Industry ◽  
Degradation Process ◽  
Heterogeneous Photocatalysis ◽  
Photometric Detection ◽  
Production Water ◽  
Field Samples ◽  
Total Hydrocarbons

ABSTRACT This research work focused on the degradation of total hydrocarbons in synthetic water mixtures and in samples obtained from the inflow of a skimmer (production water) by means of heterogeneous photocatalysis.  Titanium dioxide (TiO2) was used, modified with iron oxide (III) as photocatalyst, supported on polymethyl methacrylate plates, arranged in two reactors with volumetric capacities of 15.0 mL and 1.0 L. The degradation process was studied using two analysis methods: Photometric detection and gravimetric partition.  Degradation percentages of 91.2% and 98% were obtained in field samples and synthetic mixtures respectively, with 4 h times; this allows for assessment of this technique's impact on the treatment of produced water in the oil industry, seeking for an alternative to the methods for treating water contaminated with hydrocarbons. 

scholarly journals Inspection plan for COVID-19 patients for Weibull distribution using repetitive sampling under indeterminacy

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
G. Srinivasa Rao ◽  
Muhammad Aslam
Keyword(s):  
Weibull Distribution ◽  
Sample Size ◽  
Research Work ◽  
Sampling Plan ◽  
Design Parameters ◽  
Sample Number ◽  
Sampling Plans ◽  
Average Sample Number ◽  
Size Acceptance ◽  
Average Sample

Abstract Background This research work is elaborated investigation of COVID-19 data for Weibull distribution under indeterminacy using time truncated repetitive sampling plan. The proposed design parameters like sample size, acceptance sample number and rejection sample number are obtained for known indeterminacy parameter. Methods The plan parameters and corresponding tables are developed for specified indeterminacy parametric values. The conclusion from the outcome of the proposed design is that when indeterminacy values increase the average sample number (ASN) reduces. Results The proposed repetitive sampling plan methodology application is given using COVID-19 data belong to Italy. The efficiency of the proposed sampling plan is compared with the existing sampling plans. Conclusions Using the tables and COVID-19 data illustration, it is concluded that the proposed plan required a smaller sample size as examined with the available sampling plans in the literature.

Enumeration and Identification of Asbestos Fibres in Water

1974 ◽  
Vol 32 ◽  
pp. 526-527 ◽  
Author(s):  
O. Mudroch ◽  
J. R. Kramer
Keyword(s):  
Water Supply ◽  
Water Samples ◽  
Drainage Basin ◽  
Lake Superior ◽  
Research Work ◽  
List Type ◽  
The West ◽  
Asbestos Fibre ◽  
Amphibole Asbestos

Approximately 60,000 tons per day of waste from taconite mining, tailing, are added to the west arm of Lake Superior at Silver Bay. Tailings contain nearly the same amount of quartz and amphibole asbestos, cummingtonite and actinolite in fibrous form. Cummingtonite fibres from 0.01μm in length have been found in the water supply for Minnesota municipalities.The purpose of the research work was to develop a method for asbestos fibre counts and identification in water and apply it for the enumeration of fibres in water samples collected(a) at various stations in Lake Superior at two depth: lm and at the bottom.(b) from various rivers in Lake Superior Drainage Basin.

Beam-radiation effects on wool in the ESEM

1986 ◽  
Vol 44 ◽  
pp. 674-675
Author(s):  
G.D. Danilatos
Keyword(s):  
Electron Beam ◽  
Radiation Effects ◽  
Research Work ◽  
Beam Radiation ◽  
Liquid Environment ◽  
Know How ◽  
Environmental Sem

The advent of the environmental SEM (ESEM) has made possible the examination of uncoated and untreated specimen surfaces in the presence of a gaseous or liquid environment. However, the question arises as to what degree the examined surface remains unaffected by the action of the electron beam. It is reasonable to assume that the beam invariably affects all specimens but the type and degree of effect may be totally unimportant for one class of applications and totally unacceptable for another; yet, for a third class, it is imperative to know how our observations are modified by the presence of the beam. The aim of this report is to create an awareness of the need to initiate research work in various fields in order to determine the guiding rules of the limitations (or even advantages) due to irradiation.

Piezoelectric β-polymorph formation of new textiles by surface modification with coating process based on interfacial interaction on the conformational variation of poly (vinylidene fluoride) (PVDF) chains

2020 ◽  
Vol 91 (3) ◽  
pp. 31301
Author(s):  
Nabil Chakhchaoui ◽  
Rida Farhan ◽  
Meriem Boutaldat ◽  
Marwane Rouway ◽  
Adil Eddiai ◽  
...  
Keyword(s):  
High Efficiency ◽  
Vinylidene Fluoride ◽  
Research Work ◽  
Research Area ◽  
Interfacial Interaction ◽  
Tetraethyl Orthosilicate ◽  
Poly Vinylidene Fluoride ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Advanced Applications

Novel textiles have received a lot of attention from researchers in the last decade due to some of their unique features. The introduction of intelligent materials into textile structures offers an opportunity to develop multifunctional textiles, such as sensing, reacting, conducting electricity and performing energy conversion operations. In this research work nanocomposite-based highly piezoelectric and electroactive β-phase new textile has been developed using the pad-dry-cure method. The deposition of poly (vinylidene fluoride) (PVDF) − carbon nanofillers (CNF) − tetraethyl orthosilicate (TEOS), Si(OCH2CH3)4 was acquired on a treated textile substrate using coating technique followed by evaporation to transform the passive (non-functional) textile into a dynamic textile with an enhanced piezoelectric β-phase. The aim of the study is the investigation of the impact the coating of textile via piezoelectric nanocomposites based PVDF-CNF (by optimizing piezoelectric crystalline phase). The chemical composition of CT/PVDF-CNC-TEOS textile was detected by qualitative elemental analysis (SEM/EDX). The added of 0.5% of CNF during the process provides material textiles with a piezoelectric β-phase of up to 50% has been measured by FTIR experiments. These results indicated that CNF has high efficiency in transforming the phase α introduced in the unloaded PVDF, to the β-phase in the case of nanocomposites. Consequently, this fabricated new textile exhibits glorious piezoelectric β-phase even with relatively low coating content of PVDF-CNF-TEOS. The study demonstrates that the pad-dry-cure method can potentially be used for the development of piezoelectric nanocomposite-coated wearable new textiles for sensors and energy harvesting applications. We believe that our study may inspire the research area for future advanced applications.

A Computer-based Clinical Information System

1987 ◽  
Vol 26 (04) ◽  
pp. 189-194
Author(s):  
S. S. El-Gamal
Keyword(s):  
Information System ◽  
Hospital Information System ◽  
Clinical Information System ◽  
Research Work ◽  
Clinical Information ◽  
Hospital Staff ◽  
Vital Role ◽  
Daily Routine ◽  
Specialized Hospital ◽  
Computer Based

SummaryModern information technology offers new opportunities for the storage and manipulation of hospital information. A computer-based hospital information system, dedicated to urology and nephrology, was designed and developed in our center. It involves in principle the employment of a program that allows the analysis of non-restricted, non-codified texts for the retrieval and processing of clinical data and its operation by non-computer-specialized hospital staff.This Hospital Information System now plays a vital role in the efficient provision of a good quality service and is used in daily routine and research work in this hospital. This paper describes this specialized Hospital Information System.

Integrated FAHP-VIKOR model for green supplier selection in a Nickle coating SME

2020 ◽  
pp. 133-139
Author(s):  
Sanatan Ratna ◽  
B Kumar
Keyword(s):  
Staff Training ◽  
Supplier Selection ◽  
Fuzzy Ahp ◽  
Research Work ◽  
Supplier Evaluation ◽  
Green Supplier Selection ◽  
The Past ◽  
Coating Industry ◽  
Sustainability Issue ◽  
Selection Of

In the past few decades, there has been lot of focus on the issue of sustainability. This has occurred due to the growing concerns related to climate change and the growing awareness about environmental concerns. Also, the competition at global level has led to the search for the most sustainable route in the industries. The current research work deals with the selection of green supplier in a Nickle coating industry based on certain weighted green attributes. For this purpose, a hybrid tool comprising of Fuzzy AHP (Fuzzy Analytical Hierarchy) and VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje) is used. The Fuzzy AHP is used for assigning proper weights to the selected criteria for supplier evaluation, while VIKOR is used for final supplier selection based on the weighted criteria. The three criterions for green supplier selection are, Ecological packaging, Corporate socio-environmental responsibility and Staff Training. The outcome of the integrated model may serve as a steppingstone to other SMEs in different sectors for selecting the most suitable supplier for addressing the sustainability issue.

Analysis of Coliform and Colifecal Total Pollution Test on Various Types of Drinking Water Using the MPN (Most Probable Number) Method

2020 ◽  
Vol 2 (2) ◽  
Author(s):  
Wanda Aulya ◽  
Fadhliani Fadhliani ◽  
Vivi Mardina
Keyword(s):  
Drinking Water ◽  
Fecal Coliform ◽  
Pathogenic Bacteria ◽  
Microbiological Quality ◽  
Coliform Bacteria ◽  
Most Probable Number ◽  
Inspection Method ◽  
Sample Number ◽  
Probable Number ◽  
Fecal Coliform Bacteria

Water is the main source for life and also the most severe substance caused by pollution. The mandatory parameters for determining microbiological quality of drinking water are total non-fecal Coliform bacteria and Coliform fecal (Escherichia coli). Coliform bacteria are a group of microorganisms commonly used as indicators, where these bacteria can be a signal to determine whether a water source has been contaminated by bacteria or not, while fecal Coliform bacteria are indicator bacteria polluting pathogenic bacteria originating from human feces and warm-blooded animals (mammals) . The water inspection method in this study uses the MPN (Most Probable Number) method which consists of 3 tests, namely, the presumption test, the affirmation test, and the reinforcement test. The results showed that of 15 drinking water samples 8 samples were tested positive for Coliform bacteria with the highest total bacterial value of sample number 1, 15 (210/100 ml), while 7 other samples were negative. From 8 positive Coliform samples only 1 sample was stated to be negative fecal Coliform bacteria and 7 other samples were positive for Coliform fecal bacteria with the highest total bacterial value of sample number 1 (210/100 ml).

Sign in / Sign up

Export Citation Format

Share Document