scholarly journals Biological And Thermal Pretreatment Of Lignocellulosic Materials For Enhanced Biogas Production

Author(s):  
Samer Dahahda

The rapid depletion of natural resources and the environmental concerns associated with the use of fossil fuels as the main source of global energy is leading to an increased interest in alternative and renewable energy sources. Lignocellulosic biomass is the most abundant source of organic materials that can be utilized as an energy source. Anaerobic digestion has been proven to be an effective technology for converting organic material into energy products such as biogas. However, the nature of lignocellulosic materials hinders the ability of microorganisms in an anaerobic digestion process to degrade and convert organic material to biogas. Therefore, a pretreatment step is necessary to improve the degradability of lignocellulosic materials and achieve higher biogas yield. Several pretreatment methods have been studied over the past few years including physical, thermal, chemical and biological pretreatment. This paper reviews biological and thermal pretreatment as two main promising methods used to improve biogas production from lignocelluloses. A greater focus is given on enzymatic pretreatment which is one of the promising yet under-researched biological pretreatment method. The paper addresses challenges in degrading lignocellulosic materials and the current status of research to improve biogas yield from lignocelluloses through biological and thermal pretreatment.

2021 ◽  
Author(s):  
Samer Dahahda

The rapid depletion of natural resources and the environmental concerns associated with the use of fossil fuels as the main source of global energy is leading to an increased interest in alternative and renewable energy sources. Lignocellulosic biomass is the most abundant source of organic materials that can be utilized as an energy source. Anaerobic digestion has been proven to be an effective technology for converting organic material into energy products such as biogas. However, the nature of lignocellulosic materials hinders the ability of microorganisms in an anaerobic digestion process to degrade and convert organic material to biogas. Therefore, a pretreatment step is necessary to improve the degradability of lignocellulosic materials and achieve higher biogas yield. Several pretreatment methods have been studied over the past few years including physical, thermal, chemical and biological pretreatment. This paper reviews biological and thermal pretreatment as two main promising methods used to improve biogas production from lignocelluloses. A greater focus is given on enzymatic pretreatment which is one of the promising yet under-researched biological pretreatment method. The paper addresses challenges in degrading lignocellulosic materials and the current status of research to improve biogas yield from lignocelluloses through biological and thermal pretreatment.


2021 ◽  
Vol 17 (4) ◽  
pp. 250-256
Author(s):  
M. Haruna ◽  
O.R. Momoh ◽  
S. Bilal

Biomass is being looked upon as one of the promising renewable energy sources for the future, with growing interest in microalgae conversion into biogas through anaerobic digestion. Recently, the ability of microalgae to treat waste water has doubled its potentials material today. However, in spite of the progress made in that regards, there are still challenges of algae conversion to biofuel, due to the presence of complex cell wall in some algae. Cell wall inhibits bacteria growth during degradation. In this research work 10 grams of Microcoleous vaginatus was treated in an oven at varying temperatures of 70, 75 and 80 oC for an hour, out of which 4 g was measured into 250 ml serum bottle for digestion at mesophilic temperature of 37 oC. Based on the results of proximate analysis, 69%increase in carbohydrate was attained with 72.7 – 148% reduction in moisture content. The biogas yield of untreated sample was 4.36 mLg−1 VS, while, pretreated samples at 70, 75 and 80 ℃ produced 8.39, 9.07 and 9.38 mLg−1VS (volatile solid) of biogas. This  corresponds to 92, 108 and 115% higher than that of untreated samples. However, thermal treatment of M. vaginatus prior to digestion show positive effect on carbohydrate extraction and enhanced biogas and methane yield as well. Therefore, this makes the substrate a good feedstock for biogas production. Keywords: Biomass, pretreatment, thermal, anaerobic digestion, degradation, Microcoleous vaginatus.


2015 ◽  
Vol 787 ◽  
pp. 97-101
Author(s):  
D. Thamilselvan ◽  
K. Arulkumar ◽  
M. Kannan

The present day’sresearch interests on bioenergy have been expanded rapidly due to oil crisis of 1980s. This bio energy should be available in locally and it’spurer than the fossil fuels. The field of bio energyis important for governments, scientists and business people in worldwide because of its available in nature and renewable resource. Todays the most important renewable energy is Biomass. The biological conversion of biomass to methane has become rapidly increasing in present days. All types of organic wastes can be converted to methane. In this study the installed plant is a sintex floating type biogas plant. The cubic capacity of plant is about 1000 liter. The pH range is maintained in the level of 6.8 to 7.5. The fermentation time of the anaerobic digestion for the efficient usage of gas as a fuel is about 30 days. Our biogas plant is used for all types of anaerobic respirating wastes such as cow dung manure, kitchen wastes etc.The input feed of kitchen waste is about 10 kg per day. The output of the biogas yield is about 0.714 m3/kg. The composition of biogas is 50% to 60% of methane and rather than remaining 30% to 40% CO2and small amount of water about 2% to 5%. The performance characteristics of biogas plant are studied in this paper. To evaluate the performance of biogas production and pH variation throughout this study.


TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 16-21 ◽  
Author(s):  
NICHOLAS WOOD ◽  
HONGHI TRAN ◽  
EMMA MASTER

We examined the effectiveness of thermal, caustic, and sonication pretreatment methods in improving anaerobic conversion to biogas of secondary sludge samples obtained from a kraft mill and a sulfite mill. All three methods improved the anaerobic digestion rate and the biogas yield of the sludge samples. Thermal pretreatment was the most effective, followed closely by caustic pretreatment, and sonication the least. The total biogas productions per unit of chemical oxygen demand of sulfite sludge and kraft sludge samples were respectively 1.2 and 3 times higher with pretreatments than without. Also, the biogas production from the untreated sulfite mill sludge was 4 times higher than that from the untreated kraft mill sludge.


Author(s):  
Kumar Gaurav

A major share of world’s primary energy requirement is dependent on fossil fuels which is not only a non renewable source of energy and on the verge of extinction but also associated with serious environmental concerns. To combat these issues, alternative renewable energy sources are required. Certain examples of renewable energy sources are solar energy, wind energy, hydro and thermal energy, biofuels etc. Biomass is one such alternative which is freely and abundantly available. It is mainly the agricultural waste and vegetable waste which are perishable and create a lot of nuisance. Tapping this biomass for energy production will be beneficial in two ways; it will be an excellent source of energy generation and it will also help in waste management for environment protection. Energy generation from Biomass can take place either chemically or thermo-chemically. In the present paper advantages of anaerobic digestion of biomass are discussed for biogas production.


2018 ◽  
Vol 31 ◽  
pp. 01006 ◽  
Author(s):  
Winardi Dwi Nugraha ◽  
Syafrudin ◽  
Cut Fadhila Keumala ◽  
Hashfi Hawali Abdul Matin ◽  
Budiyono

Pretreatment during biogas production aims to assist in degradation of lignin contained in the rice husk. In this study, pretreatment which is used are acid and biological pretreatment. Acid pretreatment was performed using acetic acid and nitric acid with a variety levels of 3% and 5%. While biological pretreatment as a control variable. Acid pretreatment was conducted by soaking the rice straw for 24 hours with acid variation. The study was conducted using Solid State Anaerobic Digestion (SS-AD) with 21% TS. Biogas production was measured using water displacement method every two days for 60 days at room temperature conditions. The results showed that acid pretreatment gave an effect on the production of biogas yield. The yield of the biogas produced by pretreatment of acetic acid of 5% and 3% was 43.28 and 45.86 ml/gr.TS. While the results without pretreatment biogas yield was 29.51 ml/gr.TS. The results yield biogas produced by pretreatment using nitric acid of 5% and 3% was 12.14 ml/gr.TS and 21.85 ml/gr.TS. Results biogas yield with acetic acid pretreatment was better than the biogas yield results with nitric acid pretreatment.


2021 ◽  
Vol 10 (3) ◽  
pp. 623-633
Author(s):  
Fahmi Arifan ◽  
Abdullah Abdullah ◽  
Siswo Sumardiono

One biomass form with a high potential to replace fossil fuels is biogas. Biogas yield production depends on the raw material or substrate used. This research was aimed to investigate abiogas production technique using an anaerobic digestion process based on a substrate mixture of a starter, cow dung, chicken manure, tofu liquid waste, and cabbage waste.The anaerobic digestion is a promised process to reduce waste while it is also producing renewable energy.Moreover, the process can digest high nutrients in the waste. The anaerobic digestion results showed that the combination producing the highest biogas amount was 200 mg starter mixed with a ratio of 70% cow dung, 15% chicken manure, and 15% tofu liquid waste. The larger the amount of cabbage waste, the lower the biogas production. The quadratic regression analysisand kinetics model based on the Gompertz equation was obtained for the variable with the highest yield, compared to 70% cow dung, 15% chicken manure, and 15% tofu liquid waste and the estimated kinetic parameters based on the Gompertz equations revealed that the value of P∞ = 2,795.142 mL/gr.Ts, Rm = 113, 983.777 mL/gr.Ts, and t = 10.2 days. The results also conluded that the use of  tofu liquid waste produced more biogas than cabbage waste. This study also successfully showed significant development in terms of the amount of biogas produced by adding organic waste to animal manure as the substrate used


Author(s):  
Kai Schumüller ◽  
Dirk Weichgrebe ◽  
Stephan Köster

AbstractTo tap the organic waste generated onboard cruise ships is a very promising approach to reduce their adverse impact on the maritime environment. Biogas produced by means of onboard anaerobic digestion offers a complementary energy source for ships’ operation. This report comprises a detailed presentation of the results gained from comprehensive investigations on the gas yield from onboard substrates such as food waste, sewage sludge and screening solids. Each person onboard generates a total average of about 9 kg of organic waste per day. The performed analyses of substrates and anaerobic digestion tests revealed an accumulated methane yield of around 159 L per person per day. The anaerobic co-digestion of sewage sludge and food waste (50:50 VS) emerged as particularly effective and led to an increased biogas yield by 24%, compared to the mono-fermentation. In the best case, onboard biogas production can provide an energetic output of 82 W/P, on average covering 3.3 to 4.1% of the total energy demand of a cruise ship.


2001 ◽  
Vol 44 (4) ◽  
pp. 109-116 ◽  
Author(s):  
A. Bonmatí ◽  
X. Flotats ◽  
L. Mateu ◽  
E. Campos

Feasibility of anaerobic digestion of pig slurry is dependent, among other factors, on the biogas production rate, which is low compared with other organic wastes, and on the profitable uses of surplus thermal energy produced, a limiting factor in warm geographical areas. The objectives of this work are determining whether low temperature thermal pretreatment (<90°C) improves pig slurry anaerobic digestion, and determining whether organic matter degradation during the thermal pretreatment is due to thermal phenomena (80°C) or to enzymatic ones (60°C). The thermal degradation tests showed that hydrolysis occurring during the thermal pretreatment is due to thermal phenomena. The increase in soluble substances were significantly larger at 80°C than at 60°C (both during 3 h). Two types of slurry were used in the batch anaerobic digestion tests. The effect of thermal pretreatment differed with the type of slurry: it was positive with almost non-degraded slurries containing low NH4+-N concentration, and negative (inhibition of the anaerobic digestion process) when using degraded slurries with high NH4+-N content.


2018 ◽  
Vol 7 (3.36) ◽  
pp. 170
Author(s):  
Umar M. Ibrahim ◽  
Saeed I. Ahmed ◽  
Babagana Gutti ◽  
Idris M. Muhammad ◽  
Usman D. Hamza ◽  
...  

The combination of Irish potato waste (IPW) and poultry waste (PW) can form a synergy resulting into an effective substrate for a better biogas production due to some materials they contain. In this work, optimization and kinetic study of biogas production from anaerobic digestion of IPW and PW was investigated. Response surface methodology (RSM) was applied to optimize conditions such as initial pH, solids concentrations and waste ratios. The anaerobic digestion of the two wastes was carried out in the mesophilic condition and Box-Behnken design (BBD) was used to develop and analyze a predictive model which describes the biogas yield. The results revealed that there is a good fit between the experimental and the predicted biogas yield as revealed by the coefficient of determination (R2) value of 97.93%. Optimization using quadratic RSM predicts biogas yield of 19.75% at the optimal conditions of initial pH value 7.28, solids concentration (w/v) 9.85% and waste ratio (IPW:PW) 45:55%. The reaction was observed to have followed a first order kinetics having R2 and relative squared error (RSE) values of 90.61 and 9.63% respectively. Kinetic parameters, such as rate constant and half-life of the biogas yield were evaluated at optimum conditions to be 0.0392 day-1 and 17.68 days respectively. The optimum conditions and kinetic parameters generated from this research can be used to design real bio-digesters, monitor substrate concentrations, simulate biochemical processes and predict performance of bio-digesters using IPW and PW as substrate.  


Sign in / Sign up

Export Citation Format

Share Document