scholarly journals Effect of Atrium Compare to Courtyard on Energy Demand and Daylight in Row Housed in Toronto

2021 ◽  
Author(s):  
Tamanna Kabir
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Cold Climates ◽  
Floor Area ◽  
Large Window ◽  
Interior Spaces ◽  
Reduce Energy Consumption ◽  
Daylight Performance ◽  
Row Houses

Row houses in cold climates with increased shared wall for energy efficiency, suffer from darker interior spaces. Addition of courtyards can solve this problem to some extent, but courtyards are responsible for higher energy consumption during winter. This study investigates an alternative option, i.e. converting courtyard into atrium during winter for assessing its energy and daylight performance in row houses in Toronto. Results are determined by using Design Builder software. Research shows, during winter atrium options in row houses can reduce energy consumption compared to courtyard, but at the same time daylit floor area above target illuminance is also reduced. However, bigger courtyard having large window to wall ratio, clear glazing for courtyard windows and low e coated glazing for skylight can create a balance between increased energy consumption and decreased daylighting inside the house to maximize the benefits from converting courtyard into atrium during winter in Toronto row houses.

scholarly journals Effect of Atrium Compare to Courtyard on Energy Demand and Daylight in Row Housed in Toronto

2021 ◽  
Author(s):  
Tamanna Kabir
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Cold Climates ◽  
Floor Area ◽  
Large Window ◽  
Interior Spaces ◽  
Reduce Energy Consumption ◽  
Daylight Performance ◽  
Row Houses

Row houses in cold climates with increased shared wall for energy efficiency, suffer from darker interior spaces. Addition of courtyards can solve this problem to some extent, but courtyards are responsible for higher energy consumption during winter. This study investigates an alternative option, i.e. converting courtyard into atrium during winter for assessing its energy and daylight performance in row houses in Toronto. Results are determined by using Design Builder software. Research shows, during winter atrium options in row houses can reduce energy consumption compared to courtyard, but at the same time daylit floor area above target illuminance is also reduced. However, bigger courtyard having large window to wall ratio, clear glazing for courtyard windows and low e coated glazing for skylight can create a balance between increased energy consumption and decreased daylighting inside the house to maximize the benefits from converting courtyard into atrium during winter in Toronto row houses.

scholarly journals Energy Efficient Air Curtains for Industrial Gates in Cold Climates

2021 ◽  
Vol 246 ◽  
pp. 08005
Author(s):  
A.S. Strongin ◽  
A.M. Zhivov
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Efficient ◽  
Air Conditioning ◽  
Thermal Power ◽  
Hvac Systems ◽  
Energy Resources ◽  
Cold Climates ◽  
Construction Costs ◽  
Reduce Energy Consumption

In geographical areas with cold climates, large, massively constructed industrial and warehouse buildings and logistics complexes are large consumers of energy resources. The great height and large contained volumes of the premises, the presence of a significant number of doors, and building configurations that include many transport corridors all require the use of air-thermal curtains to increase the energy efficiency of the buildings’ heating, ventilating, and air-conditioning (HVAC) systems, which commonly produce several thousand kilowatts of thermal power. Optimization of air curtains can improve the microclimates of the premises, achieve savings in the initial construction costs, and also reduce energy consumption during operation by 10–20%.

The Research of Measuring Approach and Energy Efficiency for Hadoop Periodic Jobs

2015 ◽  
Vol 8 (1) ◽  
pp. 206-210 ◽  
Author(s):  
Yu Junyang ◽  
Hu Zhigang ◽  
Han Yuanyuan
Keyword(s):  
Energy Efficiency ◽  
Cloud Computing ◽  
Energy Consumption ◽  
Energy Saving ◽  
Energy Estimate ◽  
Cloud Platform ◽  
Periodic Tasks ◽  
Current Consumption ◽  
Reduce Energy Consumption

Current consumption of cloud computing has attracted more and more attention of scholars. The research on Hadoop as a cloud platform and its energy consumption has also received considerable attention from scholars. This paper presents a method to measure the energy consumption of jobs that run on Hadoop, and this method is used to measure the effectiveness of the implementation of periodic tasks on the platform of Hadoop. Combining with the current mainstream of energy estimate formula to conduct further analysis, this paper has reached a conclusion as how to reduce energy consumption of Hadoop by adjusting the split size or using appropriate size of workers (servers). Finally, experiments show the effectiveness of these methods as being energy-saving strategies and verify the feasibility of the methods for the measurement of periodic tasks at the same time.

The impact of technology on architecture in Iran with focus on saving in energy consumption

2015 ◽  
Vol 16 (SE) ◽  
pp. 97-103
Author(s):  
Allah Bakhsh Kavoosi ◽  
Shahin Heidari ◽  
Hamed Mazaherian
Keyword(s):  
Energy Consumption ◽  
Energy Demand ◽  
Industrial Revolution ◽  
Demand Prediction ◽  
Interior Spaces ◽  
Heating And Cooling ◽  
Impact Of Technology ◽  
Contemporary Architecture ◽  
The Impact ◽  
The Given

Growth and development of technology caused enormous transformation and change in the world after Industrial Revolution. The contemporary human has prepared the platform for their realization in many activities that the humans were unable to do it in the past time and struck the dream of their realization in their mind so that today doing many of those activities have been apparently practical by human. This accelerating growth accompanied with consuming a lot of energy where with respect to restriction of the given existing resources, it created energy crises. On the other hand, along with growth in industry and requirement for manpower and immigration from village to city and basic architectural changes in houses, which have emerged due to change in social structure it has led to change in lifestyle and type and quantity of consuming energy in contemporary architecture. Inter alia, with increase in human’s capability, cooling and heating and acoustic and lighting technologies were also changed in architecture and using mechanical system was replaced by traditional systems. Application of modern systems, which resulted from growth of industry and development of technology and it unfortunately, caused further manipulation in nature and destruction of it by human in addition to improving capability and potential of human’s creativity. With respect to growth of population and further need for housing and tendency to the dependent heating and cooling systems to them in this article we may notice that the housing is assumed as the greatest consumer of energy to create balance among the exterior and interior spaces in line with creating welfare conditions for heating and cooling and lighting. The tables of energy demand prediction in Iran show that these costs and energy consumption will be dubbed with energy control smart management in architecture.

scholarly journals Towards A Sustainable Green Design for Next-Generation Networks

2021 ◽  
Author(s):  
Isiaka Ajewale Alimi ◽  
Romilkumar K. Patel ◽  
Akeem O. Mufutau ◽  
Nelson J. Muga ◽  
Armando N. Pinto ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Wireless Networks ◽  
Energy Consumption ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Carbon Dioxide Emission ◽  
Green Energy ◽  
Green Communications ◽  
Resource Allocation Algorithm ◽  
Allocation Algorithm

Abstract The evolution in the Information and Communications Technologies industry results in excessive energy consumption and carbon dioxide emission in the wireless networks. In this context, energy efficiency in mobile networks has been attracting considerable attention as green communications and operational expenditures reduction depend on it. Although the Internet of Things is to be supported by devices that are low-energy consuming, the power consumption of the huge number to be connected for several applications and services demand significant attention. To offer insights into green communications, this paper reviews various energy efficiency improvement techniques. Also, we consider a hybrid model in which the main grid power and dynamically harvested green energy from renewable energy sources can be leveraged to support the energy demand of the radio access network. In this regard, we reformulate the energy consumption model and consider an energy-efficient power allocation algorithm for green energy optimization. Numerical results show that with resource allocation algorithm exploitation, the energy efficiency can be enhanced. Besides, the amount of the grid energy consumption can be considerably minimized, resulting in the greenhouse gas emissions reduction in the wireless networks.

scholarly journals Thermal Conductivity of Lightweight Concrete Block with Various Cooling Agent

2020 ◽  
Vol 12 (9) ◽  
Author(s):  
Masni A. Majid ◽  
◽  
Aina Syafawati Roslan ◽  
Noor Azlina Abdul Hamid ◽  
Norhafizah Salleh ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Consumption ◽  
Energy Demand ◽  
Lightweight Concrete ◽  
Human Life ◽  
Concrete Block ◽  
Experimental Result ◽  
Cooling Agent ◽  
Reduce Energy Consumption ◽  
Day By Day

Energy was the important sources to human life. Due to increases energy demand in daily life, the energy consumption was increase day by day because of the heat load from solar radiation and heat produced by people. Toward sustainable development, this research was carried out to develop a lightweight concrete (LWC) block with various cooling agent such as glycerine, propylene glycol, coconut shell and gypsum powder. Six lightweight concrete (LWC) block with the size 250mm (L) × 250mm (W) × 100mm (T) were tested for thermal conductivity value. From the experimental result, it shows that lightweight concrete (LCW) block with various cooling agent obtained thermal conductivity value of 0.17W/mK - 0.36W/mK lower than thermal conductivity value for normal lightweight concrete (0.8W/mK) depending on concrete density. The lightweight concrete (LCW) block with cooling agent having low thermal conductivity value will reduce energy consumption in building.

scholarly journals Analysis and Energy Certification of an Andalusian Public Health Center. Comparative between the General Option and Simplified Procedures

Proceedings ◽  
2019 ◽  
Vol 38 (1) ◽  
pp. 3 ◽  
Author(s):  
Javier ◽  
Jesús ◽  
Julio ◽  
Paulo
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Health Center ◽  
Energy Demand ◽  
European Parliament ◽  
Economic Feasibility ◽  
Royal Decree ◽  
The Public ◽  
Basic Procedure ◽  
Simplified Procedures

The requirements concerning the energy certification of buildings established in Directive 2002/91/EC of the European Parliament and of the Council of 16 December 2002, which was in turn modified by Directive 2010/31/EU of the European Parliament and of the Council, of 19 May 2010, regarding the energy efficiency of buildings, were transposed into Spanish legislation through Royal Decree 47/2007, dated January 19, through which a Basic Procedure for certification was approved of energy efficiency of new buildings, which was consolidated by Royal Decree 235/2013, of April 5, which approves the basic procedure for the certification of the energy efficiency of buildings. In said Royal Decree, it is established that existing buildings or units of buildings occupied by a public authority, must obtain an energy efficiency certificate and will have the obligation to display their energy efficiency label, when their total useful area exceeds 250 m2, and are usually frequented by the public. The Basic Procedure is established that must comply with the methodology for calculating the energy efficiency rating, considering those factors that have the greatest impact on their energy consumption, as well as the technical and administrative conditions for the energy efficiency certifications of the buildings. For this purpose, three software programs were promoted from the competent Ministry, one corresponding to the general option (LIDER-CALENER “HULC” unified tool) and two others corresponding to the simplified option (simplified procedures CE3 and CE3X), which allow the energy qualification to be carried out of buildings according to three types of buildings (residential, small and medium-sized tertiary, and large tertiary) that are increasing the requirements of the energy certification of the building depending on the type of the same. This study identifies the possible alternatives for improving energy efficiency over the initial qualification of the building, within a context of technical and economic feasibility, optimizing energy demand, reducing CO2 emissions and building energy consumption, being The study also compares the results obtained in the energy rating, between the general option and the simplified procedures, on an Andalusian health center in 1957, which corresponds to the typology of the Grand Tertiary building (GT).

scholarly journals Application of Rough Set Theory (RST) to Forecast Energy Consumption in Buildings Undergoing Thermal Modernization

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1309 ◽  
Author(s):  
Tomasz Szul ◽  
Stanisław Kokoszka
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Set Theory ◽  
Rough Set ◽  
Energy Demand ◽  
Rough Set Theory ◽  
Residential Buildings ◽  
Simple Procedure ◽  
Energy Performance ◽  
Improve Energy Efficiency

In many regions, the heat used for space heating is a basic item in the energy balance of a building and significantly affects its operating costs. The accuracy of the assessment of heat consumption in an existing building and the determination of the main components of heat loss depends to a large extent on whether the energy efficiency improvement targets set in the thermal upgrading project are achieved. A frequent problem in the case of energy calculations is the lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for a quick technical analysis of measures taken to improve energy efficiency in existing buildings. These methods should have satisfactory results in predicting energy consumption where the input is limited, inaccurate, or uncertain. Therefore, the aim of this work was to test the usefulness of a model based on Rough Set Theory (RST) for estimating the thermal energy consumption of buildings undergoing an energy renovation. The research was carried out on a group of 109 thermally improved residential buildings, for which energy performance was based on actual energy consumption before and after thermal modernization. Specific sets of important variables characterizing the examined buildings were distinguished. The groups of variables were used to estimate energy consumption in such a way as to obtain a compromise between the effort of obtaining them and the quality of the forecast. This has allowed the construction of a prediction model that allows the use of a fast, relatively simple procedure to estimate the final energy demand rate for heating buildings.

scholarly journals Energy Use Efficiency Past-to-Future Evaluation: An International Comparison

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3804 ◽  
Author(s):  
Chia-Nan Wang ◽  
Thi-Duong Nguyen ◽  
Min-Chun Yu
Keyword(s):  
United States ◽  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Use ◽  
The United States ◽  
Total Energy Consumption ◽  
The Future ◽  
The Status ◽  
Energy Efficiency Evaluation

Despite the many benefits that energy consumption brings to the economy, consuming energy also leads nations to expend more resources on environmental pollution. Therefore, energy efficiency has been proposed as a solution to improve national economic competitiveness and sustainability. However, the growth in energy demand is accelerating while policy efforts to boost energy efficiency are slowing. To solve this problem, the efficiency gains in countries where energy consumption efficiency is of the greatest concern such as China, India, the United States, and Europe, especially, emerging economies, is central. Additionally, governments must take greater policy actions. Therefore, this paper studied 25 countries from Asia, the Americas, and Europe to develop a method combining the grey method (GM) and data envelopment analysis (DEA) slack-based measure model (SMB) to measure and forecast the energy efficiency, so that detailed energy efficiency evaluation can be made from the past to the future; moreover, this method can be extended to more countries around the world. The results of this study reveal that European countries have a higher energy efficiency than countries in Americas (except the United States) and Asian countries. Our findings also show that an excess of total energy consumption is the main reason causing the energy inefficiency in most countries. This study contributes to policymaking and strategy makers by sharing the understanding of the status of energy efficiency and providing insights for the future.

Sign in / Sign up

Export Citation Format

Share Document