scholarly journals Eu3 + doped hydroxyapatite as a fluorescent material for biomedical applications

2019 ◽  
Vol 1 (1) ◽  
pp. 56-57
Keyword(s):  
Contrast Agent ◽  
Biomedical Applications ◽  
Fluorescent Microscopy ◽  
Luminescent Properties ◽  
Point Of View ◽  
Simple Method ◽  
Fluorescent Material ◽  
Physico Chemical ◽  
Biocompatibility Test ◽  
Mineralogical Phase

The present study is based on obtaining a contrast agent but improved with a mineralogical phase for hard tissue medical imaging. In this sense, Eu3 + is used for the contrast agent part, because of the luminescent properties and for the action part on bone regeneration the hydroxyapatite is used. The obtained mix focuses on the promotion of information regarding the development of new bone tissue, which is evidenced by the luminescent Eu3 +. Using a simple method of synthesis, it was obtained a luminescent europium-doped nanohydroxyapatite which was characterized by physico-chemical and biological point of view. With the SEM, TEM and XRD equipment’s the morphological and structural properties were analyzed. Also, to evaluate the luminescent features of the obtained material it was subjected to the UV-Vis and photoluminescence (PL) spectra. Because of the fact that the material has application in medical investigation and not only, it was performed a biocompatibility test (MTT assay) and fluorescent microscopy. The results can be a promising start due to its characteristics, in such manner the Eu3 + doped hydroxyapatite can be used as a fluorescent material for biomedical applications [1].

scholarly journals New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers

Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1539 ◽  
Author(s):  
Cornelia Vasile ◽  
Daniela Pamfil ◽  
Elena Stoleru ◽  
Mihaela Baican
Keyword(s):  
Biomedical Applications ◽  
Chemical Properties ◽  
Synthetic Polymers ◽  
Point Of View ◽  
Natural Polymers ◽  
New Developments ◽  
Organic Hybrid ◽  
Hybrid Hydrogels ◽  
Physico Chemical ◽  
Polymeric Hydrogels

New trends in biomedical applications of the hybrid polymeric hydrogels, obtained by combining natural polymers with synthetic ones, have been reviewed. Homopolysaccharides, heteropolysaccharides, as well as polypeptides, proteins and nucleic acids, are presented from the point of view of their ability to form hydrogels with synthetic polymers, the preparation procedures for polymeric organic hybrid hydrogels, general physico-chemical properties and main biomedical applications (i.e., tissue engineering, wound dressing, drug delivery, etc.).

scholarly journals Influence of Terbium Ions and Their Concentration on the Photoluminescence Properties of Hydroxyapatite for Biomedical Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2442
Author(s):  
Andrei Viorel Paduraru ◽  
Ovidiu Oprea ◽  
Adina Magdalena Musuc ◽  
Bogdan Stefan Vasile ◽  
Florin Iordache ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Fluorescent Microscopy ◽  
Luminescent Properties ◽  
Ion Concentration ◽  
Biomedical Science ◽  
Infrared Spectrometry ◽  
Photoluminescence Properties ◽  
Potential Applications ◽  
Tem Microscopy ◽  
New Generation

A new generation of biomaterials with terbium-doped hydroxyapatite was obtained using a coprecipitation method. The synthesis of new materials with luminescent properties represents a challenging but important contribution due to their potential applications in biomedical science. The main objective of this study was to revel the influence of terbium ions on the design and structure of hydroxyapatite. Different concentrations of terbium, described by the chemical formula Ca10−xTbx(PO4)6(OH)2, where x is in the range of 0 to 1, were considered. The consequence of ion concentration on hydroxyapatite morphology was also investigated. The morphology and structure, as well as the optical properties, of the obtained nanomaterials were characterized using X-ray powder diffraction analysis (XRD), Fourier Transform Infrared spectrometry (FTIR), SEM and TEM microscopy, UV-Vis and photoluminescence spectroscopies. The measurements revealed that terbium ions were integrated into the structure of hydroxyapatite within certain compositional limits. The biocompatibility and cytotoxicity of the obtained powders evaluated using MTT assay, oxidative stress assessment and fluorescent microscopy revealed the ability of the synthesized nanomaterials to be used for biological system imaging.

Visualization of Invasion into the Body and Internal Diffusion of Nanoparticles

2008 ◽  
Vol 396-398 ◽  
pp. 569-572
Author(s):  
Fumio Watari ◽  
Shigeaki Abe ◽  
I.D. Rosca ◽  
Atsuro Yokoyama ◽  
Motohiro Uo ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Fluorescent Microscopy ◽  
The Body ◽  
Internal Diffusion ◽  
Whole Body ◽  
X Ray ◽  
Body Level ◽  
Organ Level ◽  
Level 2 ◽  
Internal Body

Nanoparticles may invade directly into the internal body through the respiratory or digestive system and diffuse inside body. The behavior of nanoparticles in the internal body is also essential to comprehend for the realization of DDS. Thus it is necessary to reveal the internal dynamics for the proper treatments and biomedical applications of nanoparticles. In the present study the plural methods with different principles such as X-ray scanning analytical microscope (XSAM), MRI and Fluorescent microscopy were applied to enable the observation of the internal diffusion of micro/nanoparticles in the (1) whole body level, (2) inner organ level and (3) tissue and intracellular level. Chemical analysis was also done by ICP-AES for organs and compared with the results of XSAM mapping.

scholarly journals How to Improve Physico-Chemical Properties of Silk Fibroin Materials for Biomedical Applications?—Blending and Cross-Linking of Silk Fibroin—A Review

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1510
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska
Keyword(s):  
Silk Fibroin ◽  
Biomedical Applications ◽  
Magnetic Particles ◽  
Chemical Properties ◽  
Ternary Mixtures ◽  
Cross Linking ◽  
Advantages And Disadvantages ◽  
Physico Chemical ◽  
Binary And Ternary Mixtures ◽  
To Receive

This review supplies a report on fresh advances in the field of silk fibroin (SF) biopolymer and its blends with biopolymers as new biomaterials. The review also includes a subsection about silk fibroin mixtures with synthetic polymers. Silk fibroin is commonly used to receive biomaterials. However, the materials based on pure polymer present low mechanical parameters, and high enzymatic degradation rate. These properties can be problematic for tissue engineering applications. An increased interest in two- and three-component mixtures and chemically cross-linked materials has been observed due to their improved physico-chemical properties. These materials can be attractive and desirable for both academic, and, industrial attention because they expose improvements in properties required in the biomedical field. The structure, forms, methods of preparation, and some physico-chemical properties of silk fibroin are discussed in this review. Detailed examples are also given from scientific reports and practical experiments. The most common biopolymers: collagen (Coll), chitosan (CTS), alginate (AL), and hyaluronic acid (HA) are discussed as components of silk fibroin-based mixtures. Examples of binary and ternary mixtures, composites with the addition of magnetic particles, hydroxyapatite or titanium dioxide are also included and given. Additionally, the advantages and disadvantages of chemical, physical, and enzymatic cross-linking were demonstrated.

Formability of Hydroxyapatite on Beta-Type Ti-Nb-Ta-Zr Alloy for Biomedical Applications through Alkaline Treatment Process

2007 ◽  
Vol 352 ◽  
pp. 297-300
Author(s):  
Toshikazu Akahori ◽  
Mitsuo Niinomi ◽  
Masaaki Nakai
Keyword(s):  
Alkaline Solution ◽  
Biomedical Applications ◽  
Treatment Process ◽  
Solution Treatment ◽  
Sodium Titanate ◽  
Alkaline Treatment ◽  
Simple Method ◽  
Metallic Biomaterials ◽  
Naoh Solution ◽  
Bioactive Surface Modification

Titanium and its alloys have been widely used as biomaterials for hard tissue replacements because of their excellent mechanical properties and biocompatibility. However, the bonding between their surfaces and bone is not enough after implantation. The bioactive surface modification such as a hydroxyapatite (HAp) coating on their surfaces has been investigated. Recently, a simple method for forming HAp layer on the surfaces of titanium and its alloys has been developed. This method is called as alkaline treatment process. In this method, HAp deposits on the surfaces of titanium and its alloys by dipping into simulated body fluid (SBF) after an alkaline solution treatment that is followed by a baking treatment (alkaline treatment). This process is applicable to newly developed beta-type Ti-29Nb-13Ta-4.6Zr alloy (TNTZ) for biomedical applications achieving bioactive HAp modification. In this study, the morphology of the HAp layer formed on the surface of TNTZ was investigated after various alkaline treatments followed by dipping in SBF. The formability of HAp on the surface of TNTZ was then discussed. The formability of HAp on TNTZ is much lower than that of commercially pure Ti, Ti-6Al-4V ELI and Ti-15Mo-5Zr-3Al alloys, which are representative metallic biomaterials. The formability of HAp on TNTZ is improved by increasing the amount of Na in the sodium titanate gels formed during an alkaline solution treatment where the NaOH concentrations and the dipping time are over 5 M and 172.8 ks, respectively. The formability of HAp on TNTZ is considerably improved by dipping in a 5 M NaOH solution for 172.8 ks. This condition for alkaline solution treatment process is the most suitable for TNTZ.

Ante-Mortem Injury or Post-Mortem?—Diagnosis Using Histamine as a Marker

1982 ◽  
Vol 22 (2) ◽  
pp. 119-125 ◽  
Author(s):  
S. Sivaloganathan
Keyword(s):  
Fluorescent Microscopy ◽  
Post Mortem ◽  
Simple Method ◽  
Vital Reaction

A relatively simple method for differentiating ante-mortem from post-mortem injuries is described. It involves the demonstration of an increase in free histamine at sites of injury by fluorescent microscopy on the basis that release of free histamine is a very early vital reaction to injury.

Computational Exploration of Functional Nanoscale Carbonaceous Materials

2021 ◽  
Vol 17 ◽  
Author(s):  
Grigoriy Sereda ◽  
Md Tusar Uddin ◽  
Jacob Wente
Keyword(s):  
Biomedical Applications ◽  
Chemical Processes ◽  
Computational Power ◽  
Carbonaceous Materials ◽  
New Materials ◽  
New Era ◽  
Physico Chemical ◽  
Computational Exploration ◽  
Properties Of Materials ◽  
Computational Research

Background: The unique ability of carbon to form a wide variety of allotrope modifications has ushered a new era in the material science. Tuning the properties of these materials by functionalization is a must-have tool for their design customized for a specific practical use. The exponentially growing computational power available to researchers allows for the prediction and thorough understanding of the underlying physico-chemical processes responsible for the practical properties of pristine and modified carbons using the methods of quantum chemistry. Method: This review focuses on the computational assessment of the influence of functionalization on the properties of carbons and enabling desired practical properties of the new materials. The first section of each part of this review focuses on graphene - nearly planar units built from sp2-carbons. The second section discusses patterns of sp2-carbons rolled-up into curved 3D-structures in a variety of ways (fullerenes). The overview of other types of carbonaceous materials including those with a high abundance of sp3-carbons, including nanodiamonds, can be found in the third section of each manuscript’s part. Conclusion: The computational methods are especially critical for predicting electronic properties of materials such as the band gap, conductivity, optical and photoelectronic properties, solubility, adsorptivity, potential for catalysis, sensing, imaging and biomedical applications. We expect that introduction of defects to carbonaceous materials as a type of their functionalization will be a point of growth in this area of computational research.

scholarly journals STUDY OF PHYSICOCHEMICAL CHARACTERISTICS OF BIRD VALLEY’S QUARRY WATER PCMC, MAHARASHTRA

2021 ◽  
Vol 6 (2) ◽  
pp. 18-24
Author(s):  
Shashikala Kokcha ◽  
Harsha Chatrath
Keyword(s):  
Seasonal Variations ◽  
Water Samples ◽  
Physicochemical Characteristics ◽  
Point Of View ◽  
Present Condition ◽  
Chemical Parameters ◽  
Standard Methods ◽  
Drinking Purposes ◽  
Physico Chemical ◽  
Methods And Techniques

Purpose of the study: The purpose of this study is to make sure that the Bird valley’s quarry water is suitable for drinking purposes or not and to monitor the seasonal variations in the physico-chemical parameters of this quarry water. Methodology: Water samples from the quarry were collected in clean and sterilized polyethylene bottles. Water samples were collected from different points and mixed together to get an integrated sample. Some of the selected physico-chemical parameters of the quarry water have been analyzed. Results were compared with standard limits of IS: 10500-2012. All the parameters were analyzed in the laboratory by using standard methods and techniques. Main Findings: As per the obtained results this quarry water contains a very large number of Coliforms detected in the months of September and December and in June month Coliform count was 33 CFU/ml. This overall result for coliform is making this quarry water unfit for domestic purposes. Applications of this study: This study helps us to understand the current condition of this quarry water and also enables us to know whether the quarry water is fit for drinking purposes. It also enables us to know whether this quarry water can be used for domestic purposes after the treatment. Novelty/Originality of this study: Bird valley’s quarry water has not been analyzed from this point of view till date. This study will help us to understand the present condition of the water.

Physico-Chemical Challenges in 3D Printing of Polymeric Nanocomposites and Hydrogels for Biomedical Applications

2021 ◽  
Vol 21 (5) ◽  
pp. 2778-2792
Author(s):  
Massimo Bonini
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Biomedical Applications ◽  
Nanocomposite Materials ◽  
Manufacturing Processes ◽  
Polymeric Nanocomposites ◽  
Physico Chemical ◽  
Polymeric Hydrogels ◽  
Manufacturing Techniques

Additive manufacturing techniques (i.e., 3D printing) are rapidly becoming one of the most popular methods for the preparation of materials to be employed in many different fields, including biomedical applications. The main reason is the unique flexibility resulting from both the method itself and the variety of starting materials, requiring the combination of multidisciplinary competencies for the optimization of the process. In particular, this is the case of additive manufacturing processes based on the extrusion or jetting of nanocomposite materials, where the unique properties of nanomaterials are combined with those of a flowing matrix. This contribution focuses on the physico-chemical challenges typically faced in the 3D printing of polymeric nanocomposites and polymeric hydrogels intended for biomedical applications. The strategies to overcome those challenges are outlined, together with the characterization approaches that could help the advance of the field.

Sign in / Sign up

Export Citation Format

Share Document