scholarly journals Essential Latex Processing Plant (ELPP): A Pioneer Approach in the Production of Concentrate Latex from Local Resource to Manufacture Male Contraceptive in Bangladesh

2014 ◽  
Vol 27 (2) ◽  
pp. 11-14
Author(s):  
Sadia Afreen ◽  
Kh Rashedul Haque ◽  
Md Shariful Islam ◽  
M Kadrul Huda

For years, a respective amount of PV latex has been exported from Malaysia to manufacture male contraceptives within the country. Recently, a project titled as ELPP, has been undertaken by the Govt. Pharmaceutical Company „Essential Drugs Company Ltd? to pioneer the implementation of processing natural raw latex (35-40% dry rubber content) [1] into concentrate latex (60% dry rubber content) [1] from the local resource at Modhupur region. The purpose of this project is to produce concentrate latex from local resource as the raw material for manufacturing male contraceptive instead of importing the latex from Malaysia or other countries. Several trials have been taken place to test the feasibility and productivity of the project with respect to the aspects in Bangladesh. The results and observations are found very satisfactory and the project is very much cost effective since it cuts off the foreign expense caused due to the import of concentrate latex from abroad at present days. An overall cost analysis shows that if the technology of processing concentrate latex is implemented with a proper utilization of the local resources it reduces the cost of production to a great extent. Moreover, rubber sheets produced as the byproduct from this process are very much useful and demandable in the field of rubber industries and add profit to the process. DOI: http://dx.doi.org/10.3329/jce.v27i2.17777 Journal of Chemical Engineering, IEB Vol. ChE. 27, No. 2, December 2012: 11-14

Blood ◽  
2014 ◽  
Vol 124 (21) ◽  
pp. 848-848 ◽  
Author(s):  
Salma Afifi ◽  
Nelly G. Adel ◽  
Elaine Duck ◽  
Sean M. Devlin ◽  
Heather Landau ◽  
...  

Abstract Background: Cyclophosphamide plus G-CSF (C+G-CSF) is the most widely used stem cell (SC) mobilization regimen in multiple myeloma (MM) patients. Plerixafor plus G-CSF (P+G-CSF) has demonstrated superior SC mobilization efficacy when compared to G-CSF alone in phase II and III studies and has been shown to rescue patients who fail mobilization with G-CSF with or without cyclophosphamide. Despite the proven efficacy of P+G-CSF in upfront SC mobilization, its use for this indication has been limited, mostly due to concerns of high cost of the drug. Investigators have proposed "on demand" use of plerixafor in patients identified to have inadequate SC mobilization with G-CSF with or without cyclophosphamide, with the assumption that such an approach promotes cost containment by limiting plerixafor use. However, a comprehensive comparison of the cost effectiveness of SC mobilization using C+G-CSF versus P+G-CSF has not been performed. The goal of this retrospective study was to conduct a cost analysis between these two approaches. Methods: Using the pharmacy database, we identified all MM patients treated at Memorial Sloan Kettering Cancer Center between 11/2008 and 6/2012 who received C+G-CSF or P+G-CSF for upfront SC mobilization. Patients collecting <5 x 106 CD34+ cells/kg were considered mobilization failures and had a second attempt at SC mobilization using an alternative approach. For salvage mobilization, patients received P+G-CSF after failing C+G-CSF-based mobilization or were re-mobilized with C+G-CSF along with plerixafor after failing upfront P+G-CSF mobilization. Mobilization costs included in the analysis were those associated with upfront mobilization, those associated with salvage mobilization in patients failing an initial mobilization, and those associated with complications directly related to the mobilization procedures. Cost calculations included the following: cost of cyclophosphamide 3000 mg/m2, plerixafor 0.24 mg/kg, and G-CSF 10 mcg/kg and their administration prior to and during pheresis sessions; pheresis sessions; laboratory tests on pheresis days; re-hospitalization occurring within 15 days of either mobilization approach and considered directly related to the mobilization procedure. All costs were calculated using the institution’s ratio of cost to charges, and were normalized and adjusted based on institutional charges and costs for 2012. Results: A total of 223 patients undergoing upfront mobilization were identified, with 111 patients receiving C+G-CSF, and 112 patients receiving P+G-CSF. Thirteen patients (12%) were re-hospitalized due to C+G-CSF-related complications, with an average hospital stay of 6.5 days. No patients in the P+G-CSF arm were hospitalized. Nineteen patients (17%) in the C+G-CSF group failed first mobilization and received P+G-CSF as salvage regimen, with four (3.6%) failing salvage collection and ultimately deemed collection failures. Seven patients (6.2%) in the P+G-CSF group failed upfront mobilization and received C+G-CSF along with plerixafor as salvage regimen, with two (1.8%) subsequently failing salvage mobilization. The average number of pheresis sessions performed was 3.29 and 2.42 in the C+G-CSF and P+G-CSF upfront groups, respectively (p=0.373). In total, the average cost of stem cell collection per patient was 1.3 times greater in the C+G-CSF group than in the P+GCSF upfront group (p=0.017). When the costs associated with salvage pheresis are discounted for the 19 patients in the C+G-CSF upfront group who failed first SC mobilization, assuming that these patients could have been salvaged by plerixafor-on-demand, the cost per patient in the C+G-CSF group remains 1.26 times greater (p=0.019) than that of the P+G-CSF group. Conclusion: The use of P+G-CSF upfront for SC mobilization is more cost effective than the more widely used approach employing C+G-CSF. This difference is likely due to several factors including: 1) higher rate of hospitalization in the C+G-CSF group due to expected complications such as febrile neutropenia and catheter-related infections; 2) higher rate of mobilization failure leading to increased need for salvage mobilization in the C+G-CSF group; 3) reduced G-CSF use in the upfront P+G-CSF group. Overall, this single institution study provides additional rationale for the standard use of P+G-CSF as upfront mobilization regimen in MM patients. Disclosures No relevant conflicts of interest to declare.


Author(s):  
Luqman Raji ◽  
Zhigilla Y.I ◽  
Wadai J

Nigeria is one of developing countries in the world that experience shortage of electricity for her economic and social development. In Nigeria, most of the small-scale industries use diesel/petrol-based systems to generate their electricity. However, due to the cost fluctuation of oil and gas fuel, an alternative power generation should be considered. This paper targets to examine the cost analysis of system for supplying electricity to LUMATEC Aluminium products shop in Mubi, Adamawa state Nigeria. Hybrid Optimization Model for Electric Renewable (HOMER) is used as a tool for cost analysis. The scenario consider in this study was only stand-alone with battery system. Results revealed that the system have 10kW PV with cost of electricity (COE) of $0.312/kW. The initial capital cost and total net present cost (NPC) are $21.775 and $26.148 respectively, with payback period of 5.8years. In conclusion, this study provides the solution of power supply to the small-scale industries at cost effective and available throughout the year and it is feasible to solve the small-scale industries, rural and urban electricity supplying in this country (Nigeria). It is recommended that Nigerian Government & Law makers should promotes the use of standalone PV system for domestic and small-scale industry by providing financial assistance through soft loans, subsides and grants.


2021 ◽  
pp. 205141582110391
Author(s):  
Rion Healy ◽  
James Edward Dyer

Objective: Awareness of departmental expenditure gives surgeons the ability to make cost-effective decisions. We reviewed the available techniques for difficult catheterisation and assessed the cost of each method. Methods: A literature search was undertaken using EMBASE and Medline databases. Seven techniques for difficult catheterisation were identified, and a cost analysis was performed. All items required for a technique were costed per unit, including VAT, and can be referenced to the NHS supply chain. Results: Techniques were divided into three broad categories: simple urethral techniques – increased lubrication with different catheter sizes (£5.05) or types (£8.83 Tiemann tip, £10.65 Coude tip); complex urethral techniques – blind hydrophilic guidewire (£27.31), S-dilators (£244.62) and flexible cystoscopy (£38.78); and percutaneous techniques – suprapubic catheterisation (£117.38). Conclusion: This paper demonstrates a progression in cost and specialist input required when moving from simple urethral techniques to complex and percutaneous techniques. It is clear that clinicians should consider these cost implications and exhaust all simple techniques before moving to the more complex options. We would advocate the use of a national evidence-based difficult catheter algorithm to guide management based on both effectiveness and cost. Level of evidence: Not applicable.


Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 582
Author(s):  
Abdulelah Taher Ali Mohammed ◽  
Lijian Wang ◽  
Ronghua Jin ◽  
Guohua Liu ◽  
Chunxia Tan

The construction of a high stability heterogeneous catalyst for privileged common catalysis is a benefit in regard to reuse and separation. Herein, a palladium diphenylphosphine-based hollow-shell-structured mesoporous catalyst (HS@PdPPh2@MSN) was prepared by immobilizing bis((diphenylphosphino)ethyltriethoxysilane)palladium acetate onto the inner wall of a mesoporous organicsilicane hollow shell, whose surface was protected by a –Si(Me)3 group. Electron microscopies confirmed its hollow-shell-structure, and structural analyses and characterizations revealed its well-defined single-site active species within the silicate network. As presented in this study, the newly constructed HS@PdPPh2@MSN enabled an efficient Suzuki-Miyaura cross-coupling reaction for varieties of substrates with up to 95% yield in mild conditions. Meanwhile, it could be reused at least five times with good activity, indicating its excellent stability and recyclability. Furthermore, the cost-effective and easily synthesized HS@PdPPh2@MSN made it a good candidate for employment in fine chemical engineering.


2020 ◽  
Vol 5 (2) ◽  
pp. 93-100
Author(s):  
R.O. Kuku ◽  
O.A. Adefuye ◽  
O.L. Fadipe ◽  
G.I. Adebowale ◽  
O.M. Delogan

The need for new designs of Groundnut oil expeller is based on the cost and efficiency of the machine especially for the usage in small and medium size industries. It has to be cost effective and light weight to accommodate such demands. The existing Groundnut Oil Expellers in the market are too big and too expensive for these small medium size businesses to invest on. Other limitations are its maintenances aspect as well as its operations. Therefore, series of survey and research have been done to identify the needs and base on that, the Final Design and Specifications were synthesized. The Groundnut Oil Expeller is a screw type machine, which presses groundnut through a barrel-like cavity. Raw material (groundnut) enters one side of the press and by product (cake) exit the other side. The machine uses friction and continuous pressure from the screw drives to move and compress the groundnut. The oil seeps through small openings that do not allow groundnut fibre solids to pass through. Afterward, the pressed groundnuts are formed into a hardened cake, which is removed from the machine. This machine will satisfy the demand for the small and medium size industries because of its design, functionality and price. The measurements of the performance also being analyze by calculating the design efficiency.


2021 ◽  
Vol 1 ◽  
pp. 2681-2690
Author(s):  
Kanishk Bhadani ◽  
Gauti Asbjörnsson ◽  
Paul Bepswa ◽  
Aubrey Mainza ◽  
Elibariki Andrew ◽  
...  

AbstractA comminution process is a material size reduction and separation process which is primarily used in the aggregates and the minerals processing industry. Knowledge related to equipment’s operation, raw material properties, operational strategies, control system, maintenance, etc. is needed to design a capable plant. New needs are arising from the industry for existing operational crushing plants such as investigation for improvements, upscaling, and downscaling of the capacity. The paper presents an application of simulation-driven development for a crushing plant in an existing gold processing plant. Due to the change in ore characteristics and the need for optimizing the cost of operation, it is required to investigate the opportunities for improvement and alternative options for downscaling the capacity of the plant. A systematic process for configuring, developing, and evaluating alternative concepts using a process simulation tool is presented. The results show the process of generating knowledge for alternative crushing plant operation settings and how the choices can be selected and eliminated using boundary conditions. The evaluation presents possible improvements and alternative concepts with their opportunities and pitfalls.


Nanophotonics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 1539-1546
Author(s):  
Han Gong ◽  
Xin Liu ◽  
Guoliang Liu ◽  
Zhenhui Lin ◽  
Xiaoqiang Yu ◽  
...  

AbstractIn recent years, noble metal-based solar absorbers have been extensively studied as their pronounced plasmonic resonances and high solar-to-thermal conversion efficiency. However, the high cost of noble metals is the unavoidable roadblock restricting the way towards scalability. In this work, we report a nickel-based photothermal absorbers, which is capable of realizing an average solar absorption of ∼97% in the range of 400–2500 nm originating from relatively weaker collective plasmonic resonances but more pronounced single electron excitation. Importantly, it is easily fabricated via the straightforward physical deposition and cost-effective with a raw material price of ∼0.3% gold and ∼20% of silver. We used it for interfacial solar vapor generation and realized an evaporation rate of ∼0.9 kg m−2 h−1 under one sun, almost comparable to the counterparts made from noble metals. The excellent performance combined with the cost effective and scalable fabrication process makes it be a promising candidate for mass off-grid solar desalination.


Pharmacia ◽  
2021 ◽  
Vol 68 (1) ◽  
pp. 235-241
Author(s):  
Yaryna Hrynkiv ◽  
Olha Zaliska ◽  
Nataliia Maksymovych ◽  
Oksana Blavatska

The cost analysis for the relief of migraine attack using selective 5HT1-receptor agonists (frovatriptan, zolmitriptan, risatriptan, sumatriptan) of domestic and imported manufacturers in various dosages and forms of production in the proposed resource online pharmacy chains of Lviv for their efficient and cost effective applications. Among the registered drugs, most dosage forms and trade names are presented for sumatriptan; slightly less for risatriptan and zolmitriptan; for frovatriptan is only one trade name. It has been found that to relieve migraine attack with domestic drugs will be cheaper for patients than imported. Packaging with the same dosage of active ingredient, but with more tablets in the blister is more cost effective for patients. It`s the most economical to stop the migraine attack with Stopmigren (sumatriptan) at a dosage of 50 mg, packing 6 tablets in a blister, and the most valuable drug is Rapimig (zolmitriptan) at a dosage of 50 mg, packing 6 tablets in a blister.


2017 ◽  
Vol 1 (1) ◽  
pp. 60 ◽  
Author(s):  
Albert Empawi Tindit ◽  
Seca Gandaseca ◽  
Laurna Nyangon ◽  
Ahmad Mustapha Mohamad Pazi

Matang Mangrove Forest is under systematic management since 1902 and still considered as the best managed mangrove forest in the world. This research was conducted to measure the time and productivity of forest harvesting operation and also to analyze the cost and revenue of mangrove forest harvesting operation at Matang mangrove forest. This project had been carried out in cooperation with Seri Sepetang Enterprise, one of the harvesting licenses in Kuala Sepetang, Perak.  Data collections were taken in every station starting from standing tree until to the Kiln-Drying jetty. The data then calculated by using the formulas of productivity and cost analysis. As the result, the productivity for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are 1.84 tan/hour, 3.82 tan/hour and 4.64 tan/hour respectively.  The cost for each operation of 9 tan log volume for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are RM 56.88, RM 10.80 and RM 36.72 respectively. As the revenue, the company paid RM 260 per 9 tan of log for the in-forest operation (felling, manual skidding and loading to the ship) and pay RM 80 per 9 tan for the water transportation, and they gained the net profit of RM 192.32 and RM 43.28 respectively. The average of forest harvesting operation is twice operation in a day (equal with 2 x 9-ton volume of log production a day), so they will gain a double profit.  In conclusion, the forest harvesting operation is sustainably managed for supplying the raw material of charcoal industries in Matang mangrove forest. Since, they work manually and spend much energy in this forest harvesting operation, so for further study it recommends to conduct the ergonomics evaluation during forest harvesting operation at Matang Mangrove Forest.


Sign in / Sign up

Export Citation Format

Share Document