scholarly journals Performance of Different Cultivars of Mungbean in Coastal Region of Bangladesh

2020 ◽  
Vol 18 (1) ◽  
pp. 161-172
Author(s):  
KN Islam ◽  
MMH Khan ◽  
MM Islam ◽  
MM Uddin ◽  
MA Latif
Keyword(s):  
Block Design ◽  
Coastal Region ◽  
Flood Plain ◽  
Ecological Zone ◽  
Contributing Factors ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Pod Length ◽  
Number Of Branches

The study was conducted at farmers’ field of Itbaria, Patuakhali sadarupazila under Patuakhali district during January to April 2016under the agro ecological zone AEZ-13 (Ganges Tidal Flood plain). This site was located in between 22°14' and 22°29' North latitudes and in between 90°12' and 90°28' East longitudes of Bangladesh. Fifteenmungbean varieties viz., BARI Mung-1, BARI Mung-2, BARI Mung-3, BARI Mung-4, BARI Mung-5, BARI Mung-6, BINA Moog-4, BINA Moog-5, BINA Moog- 6, BINA Moog-7, BINA Moog-8, BU Mug-1, BU Mug-2, BU Mug-4 and Patuakhali local Mung were tested to select best suitable variety for costal region.The experiment was laid out in randomized complete block design (RCBD) with threereplications. Significant variation was observed among the different mungbeanvarities in respect of majority of the observed parameters.BU Mug-1 showed the tallest plant height while the tallest pod length was observed in BARI Mung-5. The highest number of branches per plant was found in BINA Moog-4 whereas the highest number of leaves per plant found for BARI Mung-6. The highest seed yield and yield attributes like number of pods per plant, number of seeds per pod and 1000 seed weight was recorded in BARI Mung-6 followed by BINA Moog-8 while Patuakhali local Mung produced the lowest yield and attributes. Most of the yield contributing factors of BARI Mung-6 wasfavorable for better yield in coastal region of Bangladesh. Hence the mungbean production can be increased by introducingBARI Mung-6 in costal region. SAARC J. Agri., 18(1): 161-172 (2020)

scholarly journals Effects of Phosphorus Fertilization on Hybrid Varieties of mungbean [Vigna radiata (L.) Wilczek] in a Salinity Prone Area of the Subtropics

2020 ◽  
Vol 73 (3) ◽  
Author(s):  
Mst. Nusrat Jahan ◽  
Sushama Barua ◽  
Hasan Ali ◽  
Md. Noyon Ali ◽  
Md. Sazzad Hossain Chowdhury ◽  
...  
Keyword(s):  
Seed Weight ◽  
Block Design ◽  
Interactive Effect ◽  
Growth Yield ◽  
Phosphorus Fertilization ◽  
Yield Attributes ◽  
Number Of Leaves ◽  
Pod Length ◽  
Number Of Seeds ◽  
Number Of Branches

A field experiment was conducted comprising two varieties of mungbean, BARI Mung-5 (V1) and BARI Mung-6 (V2), and five levels of phosphorus fertilizer: triple super phosphate [Ca(H<sub>2</sub>PO<sub>4</sub>)] viz. T1 (control), T2 (42.5 kg P ha<sup>−1</sup>), T3 (85 kg P ha<sup>−1</sup>), T4 (127.5 kg P ha<sup>−1</sup>), and T5 (170 kg P ha<sup>−1</sup>). The experiment was organized in a randomized complete block design with three replications. V1 produced the highest number of pods per plant (7.65), whereas the maximum 1,000-seed weight (49 g) was produced by V2. The maximum plant height (30.89 cm), number of branches per plant (8.55), number of leaves per plant (19.05), number of pods per plant (10.25), pod length (8.95 cm), number of seeds per pod (9.11), 1,000-seed weight (48.17 g), and yield (1.05 t ha<sup>−1</sup>) were obtained from the T4 treatment. The interaction of phosphorus levels and varieties had a considerable effect on the growth, yield, and yield attributes of mungbean. The highest number of leaves (20.44) and number of pods (10.39) were obtained from V1 when 127.5 kg P ha<sup>−1</sup> (T4) was applied, whereas the maximum number of seeds per pod (9.25) and maximum pod length (9.09 cm) were obtained when  85 kg P ha<sup>−1</sup> and 42.5 kg P ha<sup>−1</sup>, respectively, were used. The highest number of branches per plant (8.87), 1,000-seed weight (52.83 g), and the maximum seed yield (1.14 t ha<sup>−1</sup>) were achieved from the treatment V2T4 owing to the interactive effect of phosphorus dose and mungbean variety.

scholarly journals Effect of Integrated Nutrient Management on Plant Growth and Tuber Yield of Dahlia (Dahlia variabilis) cv. Kenya White

2021 ◽  
pp. 80-84
Author(s):  
T. Raghunandan ◽  
J. P. Collis ◽  
S. Saravanan ◽  
K. S. Barman
Keyword(s):  
Nutrient Management ◽  
Tuber Yield ◽  
Block Design ◽  
Tuber Weight ◽  
Integrated Nutrient Management ◽  
Spring Season ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Number Of Branches

The experiment was carried out at Experimental field, Department of Horticulture, Sam Higginbottom Institute of Agriculture Technology and Sciences [formerly known as Allahabad Agriculture Institute Deemed University, AAI-DU] during the Spring season 2014-2015. The experiment consists of Thirteen treatments viz., (T0) Control-RDF (100:120:100 N P K  kg ha-1,), (T1) 75% RDF + AZ@ 2.5 kg ha-1,, (T2) 75% RDF + FYM @ 10 ton ha-1, (T3) 75% RDF + VC@ 10 ton ha-1, (T4) 75% RDF + AZ @ 2.5 kg/ha +FYM @ 10 ton ha-1+VC @ 10 ton ha-1, (T5) 50% RDF +AZ@ 2.5 kg ha-1, (T6) 50% RDF + FYM@ 10 ton ha-1, (T7) 50% RDF + VC@ 10 ton ha-1, (T8) 50% RDF +  AZ @ 2.5 kg ha-1+FYM @ 10 ton ha-1+VC @ 10 ton ha-1, (T9) 25% RDF + AZ@ 2.5 kg ha-1, (T10) 25% RDF + FYM@ 10 ton ha-1, (T11) 25% RDF + VC@ 10 ton ha-1+, (T12) 25% RDF +  AZ @ 2.5 kg ha-1+FYM @ 10 ton ha-1+VC @ 10 ton ha-1. The treatments were replicated thrice in a Randomized Complete Block Design. The results revealed that Plants treated with 75% RDF + AZ @ 2.5 kg/ha +FYM @ 10 t/ha +VC @ 10 t/ha (T4) significantly recorded maximum vegetative and Tuber yield attributes like plant height (91.87 cm), plant spread (92.38 cm), Number of Branches per plant (7.27), number of leaves per plant (26.53), number of tubers per plant (4.80), maximum tuber weight (958.53) and Maximum tuber yield per plant was recorded in T4 (75% RDF + AZ @ 2.5 kg/ha +FYM @ 10 t/ha +VC @ 10 t/ha) (43.33g) followed by T3 (75% RDF + VC @ 10 t/ha) (40.95g).

scholarly journals Evaluation of M3 lines of sesame (Sesamum indicum L.) for vegetative parameters

2021 ◽  
Vol 13 (2) ◽  
pp. 10795
Author(s):  
Mohammed BABAGANA ◽  
Olamide A. FALUSI ◽  
Aliyu N. ABDULKADIR ◽  
Alhassan MOHAMMED ◽  
Hauwa SHEHU ◽  
...  
Keyword(s):  
Gamma Irradiation ◽  
Block Design ◽  
Sesamum Indicum ◽  
Petiole Length ◽  
Significant Difference ◽  
Randomized Complete Block Design ◽  
Breeding Programmes ◽  
Number Of Leaves ◽  
Different Doses ◽  
Number Of Branches

Vegetative parameters of eight M3 (third mutant generation) lines of sesame were evaluated under rain fed condition. The seeds of the lines were sown alongside their respective controls using a randomized complete block design. The eight lines were generated from three parental stocks: NCRIBEN-04E (V1), NCRIBEN-01M (V2) and NCRIBEN-03L (V3). The three parental stocks were exposed to different doses of gamma irradiation from cobalt-60 source. 04E-550-G2-3 had the highest plant height (57.40) at the 6th week which was significantly different (P<0.05) from the three checks. 03L-450-G2-2 had the highest petiole length (12.45cm) which was significantly different (P<0.05) from the checks except check three (12.25cm) which was not significantly different (P>0.05). 03L-450-G1-2 had the highest number of leaves (91) and consequently highest number of branches (5.60). Although the number of leaves were significantly different (P<0.05) from Check three (54.60), there was no significant difference (P>0.05) between the number of branches and check three (5.40). The results obtained for vegetative parameters of M3 lines of sesame suggests that some of the genotypes could be used as potential parents for future breeding programmes aimed at improving sesame lines.

scholarly journals The Effect of the Inoculation with the Mycorrhizae and Spray with FeSO4 and Anti-Transpirant on Some Growth Characters and Yield of Okra Abelmoschus esculentus L. Moench

2019 ◽  
Vol 9 (1) ◽  
pp. 170-178
Author(s):  
Hussein Hameed Abood Al-Umrany ◽  
Ridha Muastafa Abd-alhussein Al-ubaidy
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Abelmoschus Esculentus ◽  
Research Station ◽  
College Of Agriculture ◽  
Randomized Complete Block Design ◽  
Branch Plant ◽  
Number Of Leaves ◽  
Growth Characters ◽  
Number Of Branches

The present experiment was carried out at one field of the research station (B) belongs to Horticulture Department/College of Agriculture/ Baghdad University during the summer season of 2017 in order to study the effect of the inoculation with the mycorrhizae and spray with FeSO4 and Anti-Transpirant (Armurox) on some growth characters and yield of okra Abelmoschus esculentus L. Moench. The experiment was lay out as a factorial experiment (2x3x2) in randomized complete block design (RCBD) with three replications. The total number of treatments was twelve. The three factors of the experiment included; the inoculation with mycorrhizae (M) (0 and 10 g. plant-1), spray with FeSO4 (F) (0, 0.5, and 1g.L-1), and the Anti-Transpirant ‘Armurox’ (A) (0 and 5 ml.L-1). The results showed that the three factors and their interactions had significant effects on most of the growth characters measured. The inoculation with the mycorrhizae was superior in giving higher values of plant height, number of branches and total number of leaves per plant; 139.97 cm, 15.00 branch. plant-1 and 165.85 leaf. plant-1, respectively. The M1F0A0 combination treatment recorded the highest number of branches per plant (16.50) while the M1F2A1 treatment recorded the highest values of plant height (145.66 cm), total leaves number (170.33 leaf. plant-1), leaf area (731.36 dcm-2. plant-1), number of pods (19.20 pod. plant-1), and plant yield (809.40 g. plant-1).

Effect of pinching on growth and quality flower production of chrysanthemum (Chrysanthemum indicum L.)

2021 ◽  
Vol 1 (2) ◽  
pp. 62-68
Author(s):  
Md Ehsanullah ◽  
Shofiul Azam Tarapder ◽  
Abu Rashed Md Maukeeb ◽  
Anayat Ullah Khan ◽  
Ahasan Ullah Khan
Keyword(s):  
Field Study ◽  
Plant Height ◽  
Block Design ◽  
Research Centre ◽  
Flower Production ◽  
Chrysanthemum Indicum ◽  
Randomized Complete Block Design ◽  
Minimum Number ◽  
Number Of Leaves ◽  
Number Of Branches

A field study conceded to assess the effect of pinching on growth and quality flowers yield of chrysanthemum at Horticulture Research Centre (HRC), Gazipur, Bangladesh. The research was laid out in Randomized Complete Block Design (RCBD) with six treatments and three replications. The treatment combinations were as T0- No pinching, T1- Once 40 days, T2- Once 50 days, T3- Once 60 days, T4- Twice 40 and 50 days and T5- Thrice 40, 50 and 60 days. It was observed that the highest plant height 60cm in no pinching (T0) and the lowest 45 cm was recorded by pinching the plants thrice (T5). Days of the first flowering (57 days) was observed where no pinching was followed and significantly delay in flowering (68 days) was recorded in in pinching the plants thrice (T5). The highest number of branches (12) was recorded in pinching the plants thrice (T5) and the lowest number of branches (05) in no pinching (T0). The maximum number of leaves (235) was recorded in pinching the plants thrice (T5) and minimum number of leaves (200) was observed in no pinching (T0). The treatment T5 (pinching the plants thrice) attained maximum plant spread (30 cm) and the treatment T0 (no pinching) attained minimum plant spread (17cm). The highest number of flower (45) was recorded in pinching the plants thrice (T5) treatment and the lowest flower (28) was observed in T0 treatment. Among the six treatment, T5 (pinching the plants thrice) showed the highest efficacy and it could be used as treatment in cultivation of Chrysanthemum indicum for growth and quality flower production.

scholarly journals Yield attributes and oil content of different mustard (Brassica campestris l.) varieties effected by different levels of fertilizers

2016 ◽  
Vol 2 (1) ◽  
pp. 143-147
Author(s):  
Kamol Kumar Barman ◽  
Sakil Mahmud ◽  
Muhammad Salim ◽  
Bishan Lal Das Chowdhury
Keyword(s):  
Oil Content ◽  
Brassica Campestris ◽  
Block Design ◽  
Yield Attributes ◽  
Brassica Spp ◽  
Randomized Complete Block Design ◽  
Dose Control ◽  
Different Levels ◽  
Number Of Seeds ◽  
Number Of Branches

An experiment was conducted at the Agronomy Field Laboratory and Department of Biochemistry and Molecular Biology, Bangladesh Agricultural University, Mymensingh during the period from November 2013 to February 2014 to find out the appropriate fertilizer dose and best variety on the yield and oil content of mustard (Brassica spp). The experiment consisted of four fertilizer treatments viz., 0 fertilizer dose (control), 50% of recommended fertilizer dose, 100% recommended fertilizer dose and 150% of recommended fertilizer dose and three varieties viz. BINA Sarisha-5, BINA Sarisha-8 and Tori-7. The experiment was laid out in a two factor randomized complete block design with three replications. Both fertilizer dose and variety had significant effect on plant height (cm), number of branches plant-1, number of siliqua plant-1, siliqua length (cm), number of seeds siliqua-1, 1000 seed weight (g) and oil content (%). The interaction of fertilizer dose and variety had significant effect on all the plant characters except oil content of mustard (Brassica spp). The best result of the above characters was recorded in 100% recommended fertilizer dose in combination with BINA Sarisha-8. The next best result was obtained from 100% recommended fertilizer dose in combination with BINA Sarisha-5.Asian J. Med. Biol. Res. March 2016, 2(1): 143-147

EFFECT OF DIFFERENT MULCHING MATERIALS AND RATE OF APPLICATION ON GROWTH AND YIELD OF OKRA (Abelmoschus esculentus L. )

2018 ◽  
Vol 6 ◽  
pp. 81
Author(s):  
Saidat Adeola Abdul Azeez ◽  
Christopher Olu Adejuyigbe ◽  
Wasiu Babatunde Bello ◽  
Tolulope Olaoluwa Fawole
Keyword(s):  
Growth Parameters ◽  
Block Design ◽  
Field Trials ◽  
Growth And Yield ◽  
Plant Residues ◽  
Panicum Maximum ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Main Factor

Field trials were conducted at University Organic–Agriculture farm, Federal University of Agriculture Abeokuta in 2011 to determine the response of different mulching materials on growth and yield of okra. It was a 3x3 factorial laid out in Randomized Complete Block Design (RCBD) with the main factor as the plant material Chromolaena odorata (CO) Glycine max (GM) and Panicum maximum ( PM) while rate ( 0, 5 and 10t/ha) of mulching materials were applied once before the first cropping was the sub-factor and all were replicated three times. Data were collected on growth parameters and yield attributes of okra (NHAE- 47-4) at first and second planting. The parameters assessed were significantly influenced (P <0.05) by the mulching material and rate of application. Higher values for plant height ( 56.3cm and 60.7cm ) , number of leaves ( 22 and 22) and stem girth (1.5cm and 2.1cm) at 16 weeks after planting (WAP) were obtained during the first and second planting from CO application of 10t/ha. Although, the higher number of flowers ( 14 and 21), number of pods ( 29 and 21) and weight of pods/plant (0.51kg and 0.44kg) were derived from PM when 10t/ha was used at 16 WAP during both plantings. Thus, optimum okra yield were obtained with application of 10t/ha of plant residues, therefore, mulching with PM residues at 10t/ha is recommended for high fruit yield of okra in the region of investigation.

scholarly journals Effect of Miyodo on Growth, Yield Attributes and Yield in T. Aman Rice cv. BR-11

2013 ◽  
Vol 19 (1) ◽  
pp. 45-49
Author(s):  
AKMG Sarwar ◽  
J Sultana ◽  
MO Islam ◽  
AKMA Prodhan
Keyword(s):  
Grain Yield ◽  
Foliar Application ◽  
Flag Leaf ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Concentration Limit ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Number Of Leaves

An experiment was conducted in the field laboratory of the Department of Crop Botany, Bangladesh Agricultural University, Mymensingh, to investigate the effect of foliar application of Miyodo on morphology, yield contributing characters and yield of T. aman rice cv. BR-11. The concentrations of Miyodo used were 2 mgL-1, 3 mgL-1, 4 mgL-1 and 5mgL-1 with a control. The experiment was laid out in a randomized complete block design with three replications. Application of Miyodo by spraying at 45 days after transplanting significantly enhanced plant height, number of tillers and effective tillers, number of leaves and leaf area, size of flag leaf, total dry matter, panicle length, number of total grains and filled grains, 1000-grain weight, grain yield, straw yield, and harvest index. The result showed that the application of 5 mgL-1 Miyodo produced the highest grain yield of BR-11 compared to other concentrations as well as control. However, further study is needed to determine the higher concentration limit of Miyodo in maximizing the growth and yield of T. aman rice cv. BR-11.DOI: http://dx.doi.org/10.3329/pa.v19i1.17106 Progress. Agric. 19(1): 45 - 49, 2008 

scholarly journals Variability analysis of some genotypes in Nigeria tea (Camellia sinensis) germplasm

2021 ◽  
Vol 9 (1) ◽  
pp. 050-061
Author(s):  
Olayinka Olufemi Olaniyi ◽  
Olusola Babatunde Kehinde ◽  
Amos Adegbola Oloyede ◽  
Omotayo Olalekan Adenuga ◽  
Kayode Olufemi Ayegboyin ◽  
...  
Keyword(s):  
Block Design ◽  
Principal Component ◽  
Stem Cuttings ◽  
Yield Data ◽  
Single Linkage ◽  
Randomized Complete Block Design ◽  
Single Linkage Cluster ◽  
Number Of Leaves ◽  
Linkage Cluster ◽  
Number Of Branches

Thirty four tea clones were sourced from Cocoa Research Institute of Nigeria tea germplasm and raised through stem cuttings for 10 months in the nursery. The experiment was laid out in a randomized complete block design (RCBD) with 3 replications in 2016. Agronomic and yield data were collected and subjected to analysis of variance. Single linkage cluster analysis (SLCA), principal component analysis (PCA) and FATCLUS analysis were employed to analyse the data. ANOVA showed considerable significant variation p<0.05 among the 34 tea genotypes. The PCA showed that Plant Height (PH) 0.39, Number of Leaves (NL) 0.38, Number of Branches (NB) 0.37, Harvestable Points (HP) 0.31, Stem Diameter 0.39 and Leaf Breadth 0.30 accounted for most of the variations observed. Axes 1, 2 and 3 of the PCA accounted for 37.23%, 15.48% and 10.75% variability respectively with cumulative value of 63.47%. The genotypes were clustered into 7 groups by FASTCLUS Analysis. The dendrogram showed that the first cluster was observed between NGC29 and NGC 47 at 0.08 level of similarity. At 0.50 level of similarity the dendrogram revealed 5 distinct groups. Therefore, variation exists among the tea germplasm in Nigeria thereby suggests further presenting opportunities for further varietal development.

scholarly journals Selection of rapeseed mutants for higher yield and yield contributing traits

2017 ◽  
Vol 14 (2) ◽  
pp. 141-146
Author(s):  
MA Malek ◽  
MY Rafii ◽  
MK Khatun
Keyword(s):  
Seed Yield ◽  
Gamma Rays ◽  
Agronomic Traits ◽  
Block Design ◽  
Yield Attributes ◽  
Period Analysis ◽  
Randomized Complete Block Design ◽  
Maturity Period ◽  
Selection Of ◽  
Number Of Branches

Seven mutants along with the mother variety were evaluated following randomized complete block design with four replicates at four rapeseed growing areas of Bangladesh during 2013-2014 to observe their performances regarding seed yield and yield attributes, and to select promising mutants having higher seed yield with short maturity period. Analysis of variance showed highly significant variations among the mutants and the check for most of the characters studied in individual location and combined over locations. The mutant RM-01-07 required the shortest maturity period except Rangpur and the mother variety Binasarisha-4 required the longest. At Mymensingh and Rangpur, mutant RM-02-07 produced the tallest plant. Both at Mymensingh and Magura, RM-01-07 produced the highest number of siliquae plant-1 and the mother variety produced the lowest siliquae plant-1. At Ishurdi, RM-10-07 produced the highest number siliquae followed by RM-03-07. Combined means over locations showed that the six mutants matured earlier except the mutant RM-03-07 and most of the mutants produced higher number of branches plant-1 compared to the mother variety. Results over different locations also showed that the three mutants RM-01-07, RM- 10-07 and RM-04-07 produced significantly higher seed yield (1912, 1846 and 1862 kg/ha, respectively) which was 15.1, 12.1 and 11.1% higher than the mother variety, Binasarisha-4 with seed yield of 1661 kg/ha. These three mutants had also the higher number of siliquae than the mother variety. This suggests that gamma rays irradiation can be fruitfully applied to develop mutants with higher seed yield and other improved agronomic traits in oleiferous Brassica.J. Bangladesh Agril. Univ. 14(2): 141-146, December 2016

Sign in / Sign up

Export Citation Format

Share Document