scholarly journals INFORMATION SYSTEM FOR QUALITY CONTROL OF PASSENGER TRANSPORTATION

2019 ◽  
Vol 7 ◽  
pp. 56-58
Author(s):  
Petr Bugakov ◽  
Evgeniy Dolgochub

The paper considers the creation of an information system for assessing passenger transportation. The problems of such a system and its practical implementation are being considered.

1975 ◽  
Vol 14 (01) ◽  
pp. 25-28
Author(s):  
N. G. Tutuenkov ◽  
L. N. Kotchev ◽  
K. R. Rashkova ◽  
V. P. Kelbetcheva

The authors present a system which is designed to cover statistically the roughly 50 million policlinical services rendered annually in Bulgaria, for the purpose of planning and as proof of the activities in this field. The principle underlying the system was tested in the region of Plovdiv.


2019 ◽  
pp. 40-46 ◽  
Author(s):  
V.V. Savchenko ◽  
A.V. Savchenko

We consider the task of automated quality control of sound recordings containing voice samples of individuals. It is shown that in this task the most acute is the small sample size. In order to overcome this problem, we propose the novel method of acoustic measurements based on relative stability of the pitch frequency within a voice sample of short duration. An example of its practical implementation using aninter-periodic accumulation of a speech signal is considered. An experimental study with specially developed software provides statistical estimates of the effectiveness of the proposed method in noisy environments. It is shown that this method rejects the audio recording as unsuitable for a voice biometric identification with a probability of 0,95 or more for a signal to noise ratio below 15 dB. The obtained results are intended for use in the development of new and modifying existing systems of collecting and automated quality control of biometric personal data. The article is intended for a wide range of specialists in the field of acoustic measurements and digital processing of speech signals, as well as for practitioners who organize the work of authorized organizations in preparing for registration samples of biometric personal data.


2019 ◽  
Vol 6 (3) ◽  
pp. 61-67
Author(s):  
Niyaz Mustjakimovich Abdikeev ◽  
Anton Alekseevich Losev ◽  
Andrey Ivanovich Gaydamaka

The Concept of competitive value chains in production systems, as an institutional structure operating on network principles, was the impetus for the development of a system of models of inter-industry digital platform for the management and optimization of cooperation of high-tech network production systems. The article describes the ways of integration into business processes of production systems of simulation and cognitive models. The practical implementation of the system of these models is a separate software product - an interdisciplinary digital platform for participants in the creation of new high-tech products and their components.


Author(s):  
A. Popov ◽  
O.N. Lopateeva ◽  
A.K. Ovsyankin ◽  
M. M. Satsuk ◽  
A. A. Artyshko ◽  
...  

Among the measures aimed at the effective performance of public services in a modern urban environment, one of the main is the quality control and efficiency of the work performed. Timely street cleaning is hampered by several groups of problems, including the lack of a single automated information system (AIS) control of the work performed. In this regard, there is a need to improve and automate this area. This approach will allow you to combine high performance due to the speed of the system and effective quality control of street cleaning. The purpose of this work is the study and analysis of existing information systems (is), allowing to automate the process of quality control and operational performance of the above tasks. On the basis of the conducted researches, to develop is, having coordinated with the customer (administration of the Central district of Krasnoyarsk) requirements and functionality which allow to automate this process.This article presents the main aspects of the design and software solutions for the implementation of the algorithm in the form of AIS, designed to automate the process of monitoring the cleanliness of streets in the city. The development of AIS was conducted in the PhpStorm integrated development environment in the PHP programming language.


Author(s):  
А.Д. Обухов ◽  
М.Н. Краснянский ◽  
М.С. Николюкин

Рассматривается проблема выбора оптимальных параметров интерфейса в информационных системах с целью его персонализации под предпочтения пользователя и возможности его оборудования. В настоящее время для ее решения используется алгоритмическое обеспечение и статистическая обработка предпочтений пользователей, что не обеспечивает достаточной гибкости и точности. Поэтому в данной работе предлагается применение разработанного метода адаптации параметров интерфейса, основанного на анализе и обработке пользовательской информации с помощью нейронных сетей. Научная новизна метода заключается в автоматизации сбора, анализа данных и настройки интерфейса за счет использования и интеграции нейронных сетей в информационную систему. Рассмотрена практическая реализация предлагаемого метода на Python. Экспертная оценка адаптивности интерфейса тестовой информационной системы после внедрения разработанного метода показала его перспективность и эффективность. Разработанный метод показывает лучшую точность и низкую сложность программной реализации относительно классического алгоритмического подхода. Полученные результаты могут использоваться для автоматизации процесса выбора компонентов интерфейса различных информационных систем. Дальнейшие исследования заключаются в развитии и интеграции разработанного метода в рамках фреймворка адаптации информационных систем Here we consider the problem of choosing the optimal parameters of the interface in information systems with the aim of personalizing it for the preferences of the user and the capabilities of his equipment. Currently, algorithmic support and statistical processing of user preferences are used to solve it, which does not provide sufficient flexibility and accuracy. Therefore, in this work, we propose the application of the developed method for adapting interface parameters based on the analysis and processing of user information using neural networks. The scientific novelty of the method is to automate the collection, analysis of data and interface settings through the use and integration of neural networks in the information system. We consider the practical implementation of the proposed method in Python. An expert assessment of the adaptability of the interface of the test information system after the implementation of the developed method showed its availability and efficiency. The developed method shows the best accuracy and low complexity of software implementation relative to the classical algorithmic approach. The results obtained can be used to automate the selection of interface components for various information systems. Further research consists in the development and integration of the developed method within the framework of the information systems adaptation framework


Author(s):  
E. G. Semenova ◽  
◽  
M. I. Bakustina ◽  

The article is devoted to the creation of a method for preparing an unmanned aerial vehicle for implementation as a finished packaged product. To achieve the goal, modern methods of standardization and quality control are used.


2021 ◽  
Vol 17 ◽  
pp. 983-996
Author(s):  
Evripidis P. Kechagias ◽  
Dimitrios M. Miloulis ◽  
Georgios Chatzistelios ◽  
Sotiris P. Gayialis ◽  
Georgios A. Papadopoulos

As countries interact more and more, technology gains a decisive role in facilitating today’s increased need for interconnection. At the same time, systems, becoming more advanced as technology progresses, feed each other and can produce highly complex and unpredictable results. However, with this ever-increasing need for interconnected operations, complex problems arise that need to be effectively tackled. This need extends far beyond the scientific and mechanical fields, covering every aspect of life. Systemic Thinking Philosophy and the System Dynamics methodology now seem to be more relevant than ever and their practical implementation in real-life industrial cases has started to become a trend. Companies that decide to implement such approaches can achieve significant improvements to the effectiveness of their operations and gain a competitive advantage. This research, influenced by the Systemic Thinking Philosophy, applies a System Dynamics approach in practice by improving the quality control process of a pharmaceutical company. The process is modeled, simulated, analyzed, and improvements are performed to achieve more effective and efficient operations. The results show that all these steps led to a successful identification and optimization of the critical factors, and a significant process improvement was achieved.


2021 ◽  
Vol 285 ◽  
pp. 02009
Author(s):  
Anatoly Rokochinskiy ◽  
Yuri Mazhayskiy ◽  
Pavlo Volk ◽  
Roman Koptyuk ◽  
Lubov Volk ◽  
...  

Land reclamation is important in the development of agricultural production for unfavorable climatic conditions. This necessitates the improvement of scientific and methodological approaches to the creation and operation of water management and reclamation facilities, including drainage systems, which are adapted to these changes. Approaches to the type and design of drainage systems based on a combination of a modern progressive optimization approach with the traditional water balance method, hydrodynamic and hydraulic methods are presented. Approaches to the systemic optimization of technological and design solutions for the creation and operation of drainage systems have been determined. It seems that the drainage system is a complex natural and technical ecological and economic system. Finding the general optimum in such a system based on the system optimization consists in substantiating local optima for all its main components of heterogeneous elements in the system effect - mode - technology - design in their interconnection. The practical implementation of a complex of predictive-simulation and optimization calculations in projects for new construction, reconstruction and modernization of drainage systems based on the developed scientific, methodological, information and software can be carried out using the appropriate toolkit, which is CAD and modern BIM technologies. The transition to optimization methods will improve the feasibility and overall technical, technological, environmental and economic efficiency of the creation and operation of water management and reclamation facilities in accordance with modern requirements.


Sign in / Sign up

Export Citation Format

Share Document