Rancang bangun sistem deteksi suhu tubuh dan hand sanitizer nirsentuh pada prototype pintu geser otomatis

JURNAL ELTEK ◽  
2021 ◽  
Vol 19 (2) ◽  
pp. 17
Author(s):  
Putri Elfa Mas`udia ◽  
Mila Kusumawardhani ◽  
Dianthy Marya ◽  
Khayyinah Varadiba ◽  
Marviyanto Etnika Bagaskara
Keyword(s):  
Body Temperature ◽  
Temperature Sensor ◽  
The Body ◽  
Temperature Measurements ◽  
Stepper Motor ◽  
Health Ministry ◽  
Optimal Position ◽  
Security Officer ◽  
Hand Sanitizer ◽  
Temperature Detection

Dalam situasi pandemi Covid-19, roda perekonomian harus tetap berjalan dengan mengedepankan protokol kesehatan. Melansir dari keputusan menteri kesehatan bahwa setiap kantor di Indonesia yang tetap melaksakan Work From Office selama PSBB berlangsung maka harus melakukan pengukuran suhu tubuh, menyediakan hand sanitizer dengan konsentrasi alkohol minimal 70% atau menyediakan sarana cuci tangan di depan pintu masuk. Masalah yang sering terjadi adalah pengukuran suhu tubuh masih dilakukan secara manual oleh satpam kantor, dan tidak terbiasanya para karyawan untuk menggunakan hand sanitizer. Sebagai upaya pendisiplinan karyawan, maka dirancang prototype pintu otomatis yang hanya bisa terbuka jika suhu tubuh normal dan karyawan sudah menggunakan hand sanitizer.   Deteksi suhu tubuh dilakukan menggunakan sensor suhu  MLX90614 dan deteksi objek tangan menggunakan sensor infrared. Pintu geser digerakkan oleh Stepper Motor NEMA 17, pintu secara otomatis akan terbuka ketika suhu terdeteksi normal, jika tidak maka buzzer akan berbunyi dan pintu tetap tertutup. Hasil dari penelitian ini memperoleh hasil pengujian keakuratan sensor suhu MLX90614 sebesar 96.8%, posisi tangan optimal yaitu posisi tangan menengadah dengan jarak 1cm terhadap sensor, dan volume hand sanitizer yang cukup untuk mengcover seluruh telapak tangan dewasa adalah pada delay 500 ms yaitu sebesar 2.2991 gram.   During the Covid-19 pandemic, the economics activities must go on with strict health protocols. From the recommendation of health ministry, that every office in Indonesia that still performs Work From Office during the pandemic, temperature measurements must be carried out at the entrance to the office and hand sanitizer that contains minimum of 70% alcohol or hand washing facilities must be provided as well. The problem is that body temperature measurements are still done manually by security officer, and some employees are still not familiar to use hand sanitizer periodically. As an option to make employees discipline, a prototype of automatic door is designed in this research. It can only open if the body temperature of employee is normal and the employee has used hand sanitizer. Body temperature detection is carried out by using the MLX90614 temperature sensor and hand object detection will utilize infrared sensor. The sliding door is driven by the NEMA 17 Stepper Motor, the door will automatically open when the temperature is detected normally, otherwise the buzzer will sound and the door will be still closed. From the testing results in this research, the accuracy of the MLX90614 temperature sensor is 96.8%, the optimal position of the hand is 1 cm from the sensor with looking up position. And the volume of the hand sanitizer that is sufficient to cover all adult palms with 500 ms delay is 2.2991 grams.

scholarly journals Automatic Detection of Temperature and Level of Oxygen

2021 ◽  
Vol 9 (VIII) ◽  
pp. 1-3
Author(s):  
Parth Dhanawade
Keyword(s):  
Body Temperature ◽  
Temperature Sensor ◽  
Preventive Measure ◽  
Automatic Detection ◽  
The Body ◽  
Temperature Sensing ◽  
Oxygen Level ◽  
Hand Sanitizer ◽  
Sensing System

The design depicted shows the preventive measure that can be taken during the COVID-19 pandemic in the whole world. Sanitizers have become the most important things right now. By the new rules given by WHO, sanitization is needed to survive. The design gave the preventive solution for the problem stated. The design introduces automatic hand sanitizer and temperature sensing system and detects oxygen level of person. The temperature sensor on touch gives the body temperature of the person. All the data of person, such as oxy level and temperature get recorded and displayed on the screen.

scholarly journals Automated Hand Dispenser

2021 ◽  
pp. 1227-1233
Author(s):  
Manali Joshi ◽  
Sakshi Patil ◽  
Prajakta Joshi ◽  
Prof. S. K. Bavkar
Keyword(s):  
Body Temperature ◽  
Temperature Sensor ◽  
Ultrasonic Sensor ◽  
The Body ◽  
Human Hand ◽  
Hand Sanitizer ◽  
Corona Virus

According to the current pandemic situation body hygiene maintenance is the top most priority. An automatic hand sanitizer dispenser is automated and alcohol based the most important criteria is that it is touch-less machine, which will be used in hospitals, schools, work places and much more. Concentration of 70% alcohol can kill corona-virus in hand, it is scientifically proven. Here an ultrasonic sensor detects the human hand whenever placed near the machine and it will also check the distance between hand and the machine dispenser. Contactless temperature sensor is here to check the body temperature of a person and the result is pump running to pump out the hand sanitizer. This machine serves the main purpose of creating a touch-less mechanism, which maintains proper hygiene methods.

scholarly journals Design of Automatic Hand Sanitizer with Temperature Sensing

2020 ◽  
Vol 5 (5) ◽  
pp. 1269-1275
Author(s):  
Abhinandan Sarkar
Keyword(s):  
Body Temperature ◽  
Temperature Sensor ◽  
Preventive Measure ◽  
The Body ◽  
Temperature Sensing ◽  
Hand Sanitizer ◽  
Sensing System

The design depicted shows the preventive measure that can be taken during the COVID-19 pandemic in the whole world. Sanitizers have become the most significant commodities right now. By the new rules and regulations given by WHO vigorous sanitization is needed to survive. The design gave the solution for the problem stated. The design introduces an automatic hand sanitizer and temperature sensing system, to keep the hand sanitized whenever a person wants to do it, without a contact with the sanitizing machine. The temperature sensor on touching gives the body temperature of the person.

Rancang Bangun Pengukur Suhu Tubuh Dengan Multi Sensor Untuk Mencegah Penyebaran Covid-19

2021 ◽  
Vol 5 (3) ◽  
pp. 543-549
Author(s):  
Helmy Yudhistira Putra ◽  
Utomo Budiyanto
Keyword(s):  
Body Temperature ◽  
Temperature Measurement ◽  
Temperature Sensor ◽  
The Body ◽  
Body Temperatures ◽  
Heat Measurement ◽  
Turn On ◽  
Measurement Results ◽  
Door Lock ◽  
Body Heat

During the COVID-19 pandemic, the price of preventive equipment such as masks and hand sanitizers has increased significantly. Likewise, thermometers are experiencing an increase and scarcity, this tool is also sought after by many companies for screening employees and guests before entering the building to detect body temperatures that are suspected of being positive for COVID-19. The use of a thermometer operated by humans is very risky because dealing directly with people who could be ODP (People Under Monitoring/Suscpected ) or even positive for COVID-19, therefore we need tools for automatic body temperature screening and do not involve humans for the examination. This research uses the MLX-90614 body temperature sensor equipped with an ultrasonic support sensor to detect movement and measure the distance between the forehead and the temperature sensor so that the body heat measurement works optimally, and a 16x2 LCD to display the temperature measurement results. If the measured body temperature is more than 37.5 ° C degrees Celsius then the buzzer will turn on and the selenoid door lock will not open and will send a notification to the Telegram messaging application. The final result obtained is the formation of a prototype device for measuring body temperature automatically without the need to involve humans in measuring body temperature to control people who want to enter the building so as to reduce the risk of COVID-19 transmission

scholarly journals Measurement of Heart Rate, and Body Temperature Based on Android Platform

2020 ◽  
Vol 2 (1) ◽  
pp. 26-33
Author(s):  
Musyahadah Arum Pertiwi ◽  
I Dewa Gede Hari Wisana ◽  
Triwiyanto Triwiyanto ◽  
Sasivimon Sukaphat
Keyword(s):  
Heart Rate ◽  
Body Temperature ◽  
Temperature Sensor ◽  
Liquid Crystal Display ◽  
Vital Signs ◽  
Health Condition ◽  
The Body ◽  
Digital Data ◽  
Mental Condition ◽  
Measurement Results

Heart rate and body temperature can be used to determine the vital signs of humans. Heart rate and body temperature are two important parameters used by paramedics to determine the physical health condition and mental condition of a person. Because if your heart rate or body temperature is not normal then you need to make further efforts to avoid things that are not desirable. The purpose of this study is to design a heart rate and body temperature. In this study, the heart rate is detected using a finger sensor which placed on the finger. This sensor detects the heart rate pulses through infrared absorption of blood hemoglobin, and measure the body temperature using a DS18B20 temperature sensor which is placed axially. DS18B20 sensor works by converting temperature into digital data. The measurement results will be displayed on liquid crystal display (LCD) 2 x 16 and the data will be sent to android mobile phone via Bluetooth.  After the comparision beetwen the desain and the standart, the error is 0.46% for beats per minutes (BPM) parameters and 0.31 degrees Celsius for temperature parameters.

A Non-Invasive Body Temperature Measurements in Cow using IR Thermometry

2021 ◽  
Author(s):  
S MURUGESWARI ◽  
Kalpana Murugan ◽  
R. Sundaraprem
Keyword(s):  
Body Temperature ◽  
Rectal Temperature ◽  
Body Surface ◽  
The Body ◽  
Temperature Measurements ◽  
Extreme Temperatures ◽  
Non Invasive ◽  
Surface Temperatures ◽  
Abdominal Region ◽  
Measuring Surface

Abstract This research deals with continuous surface body temperature measurements in cow using IR based thermometry. Body surface temperatures were estimated contactless utilizing recordings from an IR thermometry fixed at a specific region in the cow. The body surface temperatures were dissected reflectively at two regions: the rectal region (behind the tail) and abdominal region (nearer the stomach) in the cow. The traditional invasive rectal temperature filled in as a kind of perspective temperature and was estimated with a computerized thermometer at the comparing time point. An aggregate of ten cows (Redsindhi, HF cross, Kangayam ) was inspected. The normal most extreme temperatures of the territory of the rectal (mean ± SD: 38.69 ± 0.5°C) and the abdominal region (38.4 ± 0.51°C). The temperatures of these regions in the cow were 95% accurate than the traditional invasive rectal temperature measurements. Notwithstanding, the most extreme temperatures as estimated utilizing IR thermometry expanded with an expansion in cow rectal temperature. These temperature readings are then been communicate to the remote server for continuous monitoring of the condition of cows. This communication is carried out by using Bluetooth/Wifi medium. Since this framework comes out with a non-invasive fashion measuring surface body temperature, will be an alternate way of taking a reading of temperature rather than computing the internal body temperature in an invasive fashion. Subsequently, this IR thermometry shows potential as a marker for consistent temperature estimations in cows.

scholarly journals Reliability of Body Temperature Measurements Obtained with Contactless Infrared Point Thermometers Commonly Used during the COVID-19 Pandemic

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3794
Author(s):  
Filippo Piccinini ◽  
Giovanni Martinelli ◽  
Antonella Carbonaro
Keyword(s):  
Body Temperature ◽  
The Body ◽  
Temperature Measurements ◽  
Strong Impact ◽  
Light Conditions ◽  
Public Place ◽  
Public Places ◽  
High Temperature Measurement ◽  
Fourth Experiment ◽  
Working Distance

During the COVID-19 pandemic, there has been a significant increase in the use of non-contact infrared devices for screening the body temperatures of people at the entrances of hospitals, airports, train stations, churches, schools, shops, sports centres, offices, and public places in general. The strong correlation between a high body temperature and SARS-CoV-2 infection has motivated the governments of several countries to restrict access to public indoor places simply based on a person’s body temperature. Negating/allowing entrance to a public place can have a strong impact on people. For example, a cancer patient could be refused access to a cancer centre because of an incorrect high temperature measurement. On the other hand, underestimating an individual’s body temperature may allow infected patients to enter indoor public places where it is much easier for the virus to spread to other people. Accordingly, during the COVID-19 pandemic, the reliability of body temperature measurements has become fundamental. In particular, a debated issue is the reliability of remote temperature measurements, especially when these are aimed at identifying in a quick and reliable way infected subjects. Working distance, body–device angle, and light conditions and many other metrological and subjective issues significantly affect the data acquired via common contactless infrared point thermometers, making the acquisition of reliable measurements at the entrance to public places a challenging task. The main objective of this work is to sensitize the community to the typical incorrect uses of infrared point thermometers, as well as the resulting drifts in measurements of body temperature. Using several commercial contactless infrared point thermometers, we performed four different experiments to simulate common scenarios in a triage emergency room. In the first experiment, we acquired several measurements for each thermometer without measuring the working distance or angle of inclination to show that, for some instruments, the values obtained can differ by 1 °C. In the second and third experiments, we analysed the impacts of the working distance and angle of inclination of the thermometers, respectively, to prove that only a few cm/degrees can cause drifts higher than 1 °C. Finally, in the fourth experiment, we showed that the light in the environment can also cause changes in temperature up to 0.5 °C. Ultimately, in this study, we quantitatively demonstrated that the working distance, angle of inclination, and light conditions can strongly impact temperature measurements, which could invalidate the screening results.

scholarly journals Smart Security Device for Women using IoT

2020 ◽  
Vol 8 (6) ◽  
pp. 4199-4200
Keyword(s):  
High Risk ◽  
Body Temperature ◽  
Mobile Applications ◽  
Temperature Sensor ◽  
Wearable Devices ◽  
Heart Beat ◽  
The Body ◽  
Wireless Technologies ◽  
Security Device

In present days’ women harassment is increasing and women’s life is at high risk. To overcome this problem, this paper approaches the IOT concept such as measuring the body temperature by temperature sensor, heart beat rates using pulse sensors to monitor their conditions and it alerts the mobile numbers which has been stored as emergency contact before. Since, there are already some web and mobile applications for women safety and for emergencies purposes, it does not adhere at all situations. Women cannot always be vigilant and carry huge devices with them. Instead, she could be monitored by wearing smart watches and other wearable devices, etc. It could be accessed and monitored by wireless technologies like GPS, GSM, GPRS for better results.

scholarly journals A Novel Smart Textiles To Reflect Emotion

2021 ◽  
Author(s):  
JINGYU DAI ◽  
LING DUAN ◽  
HONGYU DAI ◽  
YUTONG XIE
Keyword(s):  
Social Interaction ◽  
Body Temperature ◽  
Human Body ◽  
Temperature Sensor ◽  
Thermoelectric Generator ◽  
The Body ◽  
Experimental Results ◽  
Smart Device ◽  
Human Body Temperature ◽  
Study Designs

Abstract The present study designs a wearable smart device regarding relationship between temperature and emotion. The device, amplifies, and sub-regionally transmits the current generated by the body temperature thermoelectric generator through a smart body temperature sensor. Different areas of clothing produce controllable and intelligent color, so that adult emotions can be understood through changes in clothing colors, which is conducive to judging their moods and promoting social interaction. Experimental results show that the device can accurately detect changes in human body temperature under hilarious, fearful, soothing, and angry emotions, so as to achieve changes in clothing colors, namely blue, red, green, and brown.

Sign in / Sign up

Export Citation Format

Share Document