scholarly journals Characterization and evaluation of mechanical properties of injectable porous spherical nano-hydroxyapatite/chitosan particles for craniofacial bone regeneration

2016 ◽  
Vol 4 ◽  
Author(s):  
Uswatta Suren ◽  
Jayasuriya Ambalangodage
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Craniofacial Bone

An engineered cell-laden adhesive hydrogel promotes craniofacial bone tissue regeneration in rats

2020 ◽  
Vol 12 (534) ◽  
pp. eaay6853 ◽  
Author(s):  
Mohammad Mahdi Hasani-Sadrabadi ◽  
Patricia Sarrion ◽  
Sevda Pouraghaei ◽  
Yee Chau ◽  
Sahar Ansari ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Bone Tissue Regeneration ◽  
Engineering Applications ◽  
Craniofacial Bone ◽  
Oral Environment ◽  
Tunable Mechanical Properties ◽  
Craniofacial Tissue

Cell-laden hydrogels are widely used in tissue engineering and regenerative medicine. However, many of these hydrogels are not optimized for use in the oral environment, where they are exposed to blood and saliva. To address these challenges, we engineered an alginate-based adhesive, photocrosslinkable, and osteoconductive hydrogel biomaterial (AdhHG) with tunable mechanical properties. The engineered hydrogel was used as an injectable mesenchymal stem cell (MSC) delivery vehicle for craniofacial bone tissue engineering applications. Subcutaneous implantation in mice confirmed the biodegradability, biocompatibility, and osteoconductivity of the hydrogel. In a well-established rat peri-implantitis model, application of the adhesive hydrogel encapsulating gingival mesenchymal stem cells (GMSCs) resulted in complete bone regeneration around ailing dental implants with peri-implant bone loss. Together, we have developed a distinct bioinspired adhesive hydrogel with tunable mechanical properties and biodegradability that effectively delivers patient-derived dental-derived MSCs. The hydrogel is photocrosslinkable and, due to the presence of MSC aggregates and hydroxyapatite microparticles, promotes bone regeneration for craniofacial tissue engineering applications.

scholarly journals Zn-Containing Membranes for Guided Bone Regeneration in Dentistry

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1797
Author(s):  
Manuel Toledano ◽  
Marta Vallecillo-Rivas ◽  
María T. Osorio ◽  
Esther Muñoz-Soto ◽  
Manuel Toledano-Osorio ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Bone Healing ◽  
Bone Repair ◽  
Complex Modulus ◽  
Bacterial Colonization ◽  
Guided Bone Regeneration ◽  
M2 Macrophage

Barrier membranes are employed in guided bone regeneration (GBR) to facilitate bone in-growth. A bioactive and biomimetic Zn-doped membrane with the ability to participate in bone healing and regeneration is necessary. The aim of the present study is to state the effect of doping the membranes for GBR with zinc compounds in the improvement of bone regeneration. A literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. A narrative exploratory review was undertaken, focusing on the antibacterial effects, physicochemical and biological properties of Zn-loaded membranes. Bioactivity, bone formation and cytotoxicity were analyzed. Microstructure and mechanical properties of these membranes were also determined. Zn-doped membranes have inhibited in vivo and in vitro bacterial colonization. Zn-alloy and Zn-doped membranes attained good biocompatibility and were found to be non-toxic to cells. The Zn-doped matrices showed feasible mechanical properties, such as flexibility, strength, complex modulus and tan delta. Zn incorporation in polymeric membranes provided the highest regenerative efficiency for bone healing in experimental animals, potentiating osteogenesis, angiogenesis, biological activity and a balanced remodeling. Zn-loaded membranes doped with SiO2 nanoparticles have performed as bioactive modulators provoking an M2 macrophage increase and are a potential biomaterial for promoting bone repair. Zn-doped membranes have promoted pro-healing phenotypes.

scholarly journals Additive manufacturing of PLA-based scaffolds intended for bone regeneration and strategies to improve their biological properties

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 571-599
Author(s):  
Ricardo Donate ◽  
Mario Monzón ◽  
María Elena Alemán-Domínguez
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Additive Manufacturing ◽  
Bone Regeneration ◽  
Polylactic Acid ◽  
State Of The Art ◽  
Biological Properties ◽  
Design Stage ◽  
Bone Scaffolds ◽  
Regeneration Of Bone

AbstractPolylactic acid (PLA) is one of the most commonly used materials in the biomedical sector because of its processability, mechanical properties and biocompatibility. Among the different techniques that are feasible to process this biomaterial, additive manufacturing (AM) has gained attention recently, as it provides the possibility of tuning the design of the structures. This flexibility in the design stage allows the customization of the parts in order to optimize their use in the tissue engineering field. In the recent years, the application of PLA for the manufacture of bone scaffolds has been especially relevant, since numerous studies have proven the potential of this biomaterial for bone regeneration. This review contains a description of the specific requirements in the regeneration of bone and how the state of the art have tried to address them with different strategies to develop PLA-based scaffolds by AM techniques and with improved biofunctionality.

Biomimetic porous Mg with tunable mechanical properties and biodegradation rates for bone regeneration

2019 ◽  
Vol 84 ◽  
pp. 453-467 ◽  
Author(s):  
Min-Ho Kang ◽  
Hyun Lee ◽  
Tae-Sik Jang ◽  
Yun-Jeong Seong ◽  
Hyoun-Ee Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Tunable Mechanical Properties

scholarly journals Bone Regeneration in Critical-Sized Bone Defects Treated with Additively Manufactured Porous Metallic Biomaterials: The Effects of Inelastic Mechanical Properties

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1992
Author(s):  
Marianne Koolen ◽  
Saber Amin Yavari ◽  
Karel Lietaert ◽  
Ruben Wauthle ◽  
Amir A. Zadpoor ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bulk Material ◽  
Bone Tissue Regeneration ◽  
Bony Tissue ◽  
Metallic Biomaterials ◽  
Cp Ti ◽  
Porous Biomaterials

Additively manufactured (AM) porous metallic biomaterials, in general, and AM porous titanium, in particular, have recently emerged as promising candidates for bone substitution. The porous design of such materials allows for mimicking the elastic mechanical properties of native bone tissue and showed to be effective in improving bone regeneration. It is, however, not clear what role the other mechanical properties of the bulk material such as ductility play in the performance of such biomaterials. In this study, we compared the bone tissue regeneration performance of AM porous biomaterials made from the commonly used titanium alloy Ti6Al4V-ELI with that of commercially pure titanium (CP-Ti). CP-Ti was selected because of its high ductility as compared to Ti6Al4V-ELI. Critical-sized (6 mm diameter) femoral defects in rats were treated with implants made from both Ti6Al4V-ELI and CP-Ti. Bone regeneration was assessed up to 11 weeks using micro-CT scanning. The regenerated bone volume was assessed ex vivo followed by histology and biomechanical testing to assess osseointegration of the implants. The bony defects treated with AM CP-Ti implants generally showed higher volumes of regenerated bone as compared to those treated with AM Ti6Al4V-ELI. The torsional strength of the two titanium groups were similar however, and both considerably lower than those measured for intact bony tissue. These findings show the importance of material type and ductility of the bulk material in the ability for bone tissue regeneration of AM porous biomaterials.

scholarly journals Mechanical properties of highly porous PEEK bionanocomposites incorporated with carbon and hydroxyapatite nanoparticles for scaffold applications

2019 ◽  
Vol 8 (3) ◽  
pp. 211-221 ◽  
Author(s):  
Md. Nizam Uddin ◽  
Puttagounder S. Dhanasekaran ◽  
Ramazan Asmatulu
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Pore Size ◽  
Mechanical Tests ◽  
Bone Diseases ◽  
Filler Materials ◽  
Test Results ◽  
Micro Computed Tomography ◽  
Carbon Particles ◽  
Highly Porous

Abstract Bone regeneration is of great importance worldwide, because of various bone diseases, such as infections, tumors, and resultant fracture, birth defects, and bone loss due to trauma, explosion, or accident. Bone regeneration can be achieved by several materials and templates manufactured through various fabrication techniques. Uses of different materials and scaffold fabrication techniques have been explored over the past 20 years. In this research, polyetheretherketone (PEEK) was used to fabricate highly porous bionanocomposite foams for bone scaffolding. Melt casting and salt porogen (200–500 µm size) leaching methods were adapted to create an adequate pore size and the necessary percent of porosity, because pore size plays a vital role in cell implantation and growth. Porosity (75% and 85%) of the prepared scaffolds was adjusted by changing salt concentrations in the PEEK powder. Hydroxyapatite (HA) and carbon particles were used to improve cell attachments and interactions with the porous PEEK and to increase the mechanical properties of the scaffold materials. Carbon fiber (CF) and carbon nanotubes (CNTs) were uniformly dispersed into the PEEK powder before melt casting to enhance the mechanical properties and to observe the influence of the carbon particles on the properties of PEEK bionanocomposite foam. Compression test results of the fabricated bionanocomposites showed that HA and carbon particles are the potential filler materials for the enhancement of bionanocomposite mechanical properties. About 186% enhancement of compression modulus and 43% enhancement of yield strength were observed while incorporating only 0.5 wt% of CNTs into PEEK/HA bionanocomposites having 75% porosity, compared to PEEK/HA 20 wt% bionanocomposites. Micro-computed tomography (micro-CT) test results reveal that pore size and interconnectivity of the nanocomposite foams are in order and within the designed sizes. Mechanical tests proved that PEEK bionanocomposite foam has the potential for use in bone scaffolding and other biomedical applications.

Strategy for enhancing mechanical properties and bone regeneration of 3D polycaprolactone kagome scaffold: Nano hydroxyapatite composite and its exposure

2020 ◽  
Vol 134 ◽  
pp. 109814 ◽  
Author(s):  
Yong Sang Cho ◽  
Meiling Quan ◽  
Nae-Un Kang ◽  
Hun-Jin Jeong ◽  
Myoung Wha Hong ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Hydroxyapatite Composite

Effect of sex-hormone levels, sex, body mass index and other host factors on human craniofacial bone regeneration with bioactive tricalcium phosphate grafts

Biomaterials ◽  
2017 ◽  
Vol 123 ◽  
pp. 48-62 ◽  
Author(s):  
Christine Knabe ◽  
Aynur Mele ◽  
Peter Herbert Kann ◽  
Barbara Peleska ◽  
Doaa Adel-Khattab ◽  
...  
Keyword(s):  
Body Mass Index ◽  
Bone Regeneration ◽  
Body Mass ◽  
Tricalcium Phosphate ◽  
Sex Hormone ◽  
Host Factors ◽  
Hormone Levels ◽  
Craniofacial Bone

scholarly journals Zinc-containing bioactive glasses for bone regeneration, dental and orthopedic applications

2015 ◽  
Vol 1 (1) ◽  
Author(s):  
Preethi Balasubramanian ◽  
Leonie A. Strobel ◽  
Ulrich Kneser ◽  
Aldo R. Boccaccini
Keyword(s):  
Mechanical Properties ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Human Body ◽  
Relevant Literature ◽  
The Body ◽  
Biological Behavior ◽  
Bioactive Glasses ◽  
Immune System Cell

AbstractZinc is a vital and beneficial trace element found in the human body. Though found in small proportions, zinc performs a variety of functions in relation to the immune system, cell division, fertility and the body growth and maintenance. In particular, zinc is proven to be a necessary element for the formation, mineralization, development and maintenance of healthy bones. Considering this attractive attributes of zinc, recent research has widely focused on using zinc along with silicate-based bioactive glasses for bone tissue engineering applications. This paper reviews relevant literature discussing the significance of zinc in the human body, along with its ability to enhance antibacterial effects, bioactivity and distinct physical, structural and mechanical properties of bioactive glasses. In this context, even if the present analysis is not meant to be exhaustive and only representative studies are discussed, literature results confirm that it is essential to understand the properties of zinc-containing bioactive glasses with respect to their in vitro biological behavior, possible cytotoxic effects and degradation characteristics to be able to effectively apply these glasses in bone regeneration strategies. Topics attracting increasing research efforts in this field are elaborated in detail in this review, including a summary of the structural, physical, biological and mechanical properties of zinc-containing bioactive glasses. This paper also presents an overview of the various applications in which zinc-containing bioactive glasses are considered for use as bone tissue scaffolds, bone filling granules, bioactive coatings and bone cements, and advances and remaining challenges are highlighted.

Sign in / Sign up

Export Citation Format

Share Document