scholarly journals A Numerical Investigation of the Characteristics of Seismic Signals Induced by Rockfalls

2021 ◽  
Vol 9 ◽  
Author(s):  
Zheng-Yi Feng ◽  
Zhao-Ru Shen ◽  
Rui-Chia Zhuang
Keyword(s):  
Numerical Model ◽  
Numerical Investigation ◽  
Parametric Analysis ◽  
Seismic Signals ◽  
Arias Intensity ◽  
Rockfall Hazard ◽  
Rayleigh Damping ◽  
Coupling Approach ◽  
Simulation Results

This study proposes a numerical coupling approach to simulate seismic signals of rockfalls and conducts a parametric analysis to explore the characteristics of the seismic signals generated by rockfalls. To validate the approach, three field rockfall tests were selected for comparison. The rockfall velocity, duration, seismic frequency, Husid plot, Arias intensity, and spectrogram of the seismic signals were compared. We found that friction between rocks and the ground affects rock falling behavior. In addition, the local damping and Rayleigh damping assignments in the numerical model have strong effects on the simulation results. The volume of the falling rock and the falling speed of the rock affect the Arias intensity. The coupling approach proposed could be extended and can potentially be used as a useful tool in rockfall hazard estimations.

scholarly journals Investigation of the Thickness Differential on the Formability of Aluminum Tailor Welded Blanks

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 875
Author(s):  
Jie Wu ◽  
Yuri Hovanski ◽  
Michael Miles
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Numerical Model ◽  
Plastic Strain ◽  
Finite Element Model ◽  
Equivalent Plastic Strain ◽  
Element Model ◽  
Dome Height ◽  
Tailor Welded Blanks ◽  
Simulation Results

A finite element model is proposed to investigate the effect of thickness differential on Limiting Dome Height (LDH) testing of aluminum tailor-welded blanks. The numerical model is validated via comparison of the equivalent plastic strain and displacement distribution between the simulation results and the experimental data. The normalized equivalent plastic strain and normalized LDH values are proposed as a means of quantifying the influence of thickness differential for a variety of different ratios. Increasing thickness differential was found to decrease the normalized equivalent plastic strain and normalized LDH values, this providing an evaluation of blank formability.

NUMERICAL INVESTIGATION OF FILM DISTRIBUTION IN HORIZONTAL-TUBE FALLING FILM EVAPORATOR

2011 ◽  
Vol 19 (03) ◽  
pp. 177-183 ◽  
Author(s):  
JIN-BO CHEN ◽  
QING-GANG QIU
Keyword(s):  
Numerical Simulation ◽  
Fluid Flow ◽  
Film Thickness ◽  
Liquid Film ◽  
Numerical Investigation ◽  
Horizontal Tube ◽  
Flow Density ◽  
Falling Film ◽  
Film Distribution ◽  
Simulation Results

The technique of horizontal-tube falling film has been used in the cooling and heating industries such as refrigeration systems, heating systems and ocean thermal energy conversion systems. The comprehensive performance of evaporator is directly affected by the film distribution characteristics outside tubes. In this paper, numerical investigation was performed to predict the film characteristics outside the tubes in horizontal-tube falling film evaporator. The effects of liquid flow rate, tube diameter and the circular degree of tube on the film thickness were presented. The numerical simulation results were compared with that of the empirical equations for calculating the falling film thickness, and agreements between them were reasonable. Numerical simulation results show that, at the fixed fluid flow density, the liquid film is thicker on the upper and lower tube and the thinnest liquid film appears at angle of about 120°. The results also indicate that, when the fluid flow density decreases to a certain value, the local dryout spot on the surface of the tube would occur. In addition, the film thickness decreases with the increases of the tube diameter at the fixed fluid flow density.

The Ship Track Keeping With Roll Reduction Using a Multiple-States PD Controller on the Rudder Operation

2008 ◽  
Vol 45 (01) ◽  
pp. 21-27
Author(s):  
Ming-Chung Fang ◽  
Jhih-Hong Luo
Keyword(s):  
Numerical Model ◽  
Line Of Sight ◽  
Pd Controller ◽  
Input Multiple Output ◽  
Maneuvering In Waves ◽  
Single Input ◽  
Reduction Function ◽  
Simulation Results ◽  
Guidance Technique ◽  
Present Simulation

The paper presents a nonlinear hydrodynamic numerical model with multiple-states proportional-derivative (PD) controllers for simulating the ship's tracking in random sea. By way of the rudder operation, the track-keeping ability of the PD controller on the ship is examined using the line-of-sight (LOS) guidance technique. Furthermore, the roll-reduction function using the rudder control is also included in the PD controller. From the present simulation results, the single-input multiple-output (SIMO) heading/roll PD controller including LOS technique developed here indeed works, either for the roll reduction or for track keeping while the ship is maneuvering in waves.

Experimental and Numerical Investigation Into the Effects of Initial Conditions on a Three Degree of Freedom Capsize Model

2006 ◽  
Vol 50 (01) ◽  
pp. 63-84
Author(s):  
Young-Woo Lee ◽  
Leigh McCue ◽  
Michael Obar ◽  
Armin Troesch
Keyword(s):  
Numerical Model ◽  
Numerical Investigation ◽  
Initial Conditions ◽  
Degree Of Freedom ◽  
Transient Effects ◽  
Ultimate State ◽  
Extreme Behavior ◽  
Three Degree Of Freedom ◽  
Physical Phenomena ◽  
Ship Capsizing

The dynamics and hydrodynamics of ship capsizing include strong nonlinearities, transient effects, and physical phenomena that have not been fully identified or studied. This paper presents a study of some of the various mechanisms associated with this extreme behavior. A quasi-nonlinear three degree of freedom numerical model is employed to examine the effects of initial conditions on the ultimate state of a box barge model. The numerical results are then used to provide structure and understanding to otherwise seemingly inconsistent and ambiguous experiments.

scholarly journals Evaluating the Effect of External Horizontal Fixed Shading Devices’ Geometry on Internal Air Temperature, Daylighting and Energy Demand in Hot Dry Climate. Case Study of Ghardaïa, Algeria

Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 348
Author(s):  
Sahar Magri Elouadjeri ◽  
Aicha Boussoualim ◽  
Hassan Ait Haddou
Keyword(s):  
Solar Radiation ◽  
Parametric Analysis ◽  
Energy Demand ◽  
Daylighting Simulation ◽  
Simulation Results ◽  
Shading Devices ◽  
Heating Loads ◽  
Shading Device ◽  
The City

The present study investigates the effect of fixed external shading devices’ geometry on thermal comfort, daylighting and energy demand for cooling and heating in the hot and dry climate of the city of Ghardaïa (Algeria). A parametric analysis was performed by using three software: RADIANCE 2.0 and DAYSIM 3.1 for daylighting simulation and TRNSYS.17 for thermal dynamic simulation. Three shading device parameters were assessed: the spacing between slats, the tilted angle and the slats installation. The vertical shading angle “VSA” is fixed; it is equal to the optimum shading angle measured for Ghardaïa. The simulation results indicate that fixed external shading devices have a significant impact on decreasing the energy demand for cooling; however, they are unable to reduce the total energy demand since they significantly increase heating loads. It was found that fixed external shading devices remove all risks associated with glare in summer by decreasing illuminance close to the window; however, they do not improve daylighting performance in winter because of glare. We note that even if the vertical shading angle “VSA” was the same for all cases, these did not present the same thermal and luminous behavior. This is mainly due to the amount and the way that the solar radiation penetrates space.

scholarly journals Numerical modelling of agglomeration process in a granular bed containing melting particles

2021 ◽  
Vol 2057 (1) ◽  
pp. 012063
Author(s):  
I G Donskoy
Keyword(s):  
Thermal Decomposition ◽  
Porous Medium ◽  
Numerical Model ◽  
Numerical Modelling ◽  
Side Wall ◽  
Low Grade ◽  
Granular Bed ◽  
Agglomeration Process ◽  
Simulation Results ◽  
Implicit Numerical Method

Abstract The paper considers a numerical model of a flow in a porous medium containing particles of a melting component (polymer). For this, an implicit numerical method of splitting in directions is used. Calculations are carried out for two heating methods (through the side wall, or by the input gas). The simulation results qualitatively reproduce some of the experimentally observed features of the thermal decomposition of polymer-containing mixtures. The results obtained are of interest in the study of low-grade fuels processing, often accompanied by agglomeration, as well as in the development of methods by which agglomeration can be prevented.

scholarly journals NUMERICAL SIMULATION OF TSUNAMI CURRENTS

2011 ◽  
Vol 1 (32) ◽  
pp. 6 ◽  
Author(s):  
Eizo Nakaza ◽  
Tsunakiyo Iribe ◽  
Muhammad Abdur Rouf
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Open Channel ◽  
Implicit Method ◽  
Simulation Results ◽  
Moving Particle ◽  
Fixed Structure ◽  
Tsunami Currents

The paper aims to simulate Tsunami currents around moving and fixed structures using the moving-particle semi-implicit method. An open channel with four different sets of structures is employed in the numerical model. The simulation results for the case with one structure indicate that the flow around the moving structure is faster than that around the fixed structure. The flow becomes more complex for cases with additional structures.

Sign in / Sign up

Export Citation Format

Share Document