scholarly journals Electrospinning of Chitosan for Antibacterial Applications—Current Trends

2021 ◽  
Vol 11 (24) ◽  
pp. 11937
Author(s):  
Eliconda Antaby ◽  
Kristina Klinkhammer ◽  
Lilia Sabantina
Keyword(s):  
Antibacterial Effect ◽  
Antibacterial Properties ◽  
Food Storage ◽  
Wound Treatment ◽  
Electrospinning Technique ◽  
Food Protection ◽  
Current Trends ◽  
Nanofibrous Scaffolds ◽  
Wide Range ◽  
Sustainable Materials

Chitosan is a natural biopolymer that can be suitable for a wide range of applications due to its biocompatibility, rigid structure, and biodegradability. Moreover, it has been proven to have an antibacterial effect against several bacteria strains by incorporating the advantages of the electrospinning technique, with which tailored nanofibrous scaffolds can be produced. A literature search is conducted in this review regarding the antibacterial effectiveness of chitosan-based nanofibers in the filtration, biomedicine, and food protection industries. The results are promising in terms of research into sustainable materials. This review focuses on the electrospinning of chitosan for antibacterial applications and shows current trends in this field. In addition, various aspects such as the parameters affecting the antibacterial properties of chitosan are presented, and the application areas of electrospun chitosan nanofibers in the fields of air and water filtration, food storage, wound treatment, and tissue engineering are discussed in more detail.

scholarly journals In VitroAssessment of Antibacterial Activity and Cytocompatibility of Quercetin-Containing PLGA Nanofibrous Scaffolds for Tissue Engineering

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Zhi-Cai Xing ◽  
Wan Meng ◽  
Jiang Yuan ◽  
Sungmo Moon ◽  
Yongsoo Jeong ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Epithelial Cells ◽  
Biological Activities ◽  
Antibacterial Properties ◽  
Bacterial Strains ◽  
Antibacterial Effects ◽  
Electrospinning Technique ◽  
Cell Compatibility ◽  
Nanofibrous Scaffolds ◽  
Wide Range

Flavonoids, such as quercetin, have been reported to exhibit a wide range of biological activities related to their antioxidant capacity. The aim of this study was to investigate the protective effect of quercetin on cell adhesion, and the viability and proliferation of KB epithelial cells. Quercetin- (1, 5 wt%)-containing poly (l-lactide-co-glycolide) (PLGA) nanofibrous scaffolds (PLGA/Q 1, PLGA/Q 5) were prepared by electrospinning technique and their antibacterial properties were examined. Two types of bacteria strains,Staphylococcus aureus(SA) andKlebsiella pneumoniae(KP), were used to evaluate the antibacterial properties of the scaffolds. The results showed that the quercetin-containing PLGA nanofibrous scaffolds exhibited significant antibacterial effects against the two bacterial strains. KB epithelial cells were also used to evaluate the cytocompatibility of the scaffolds. From the results, it was found that the PLGA nanofibrous scaffolds with 1 wt% of quercetin had good cell compatibility. It is considered that the PLGA nanofibrous scaffolds with 1 wt% quercetin have potential to be used in tissue engineering.

scholarly journals Fabrication and Evaluation of Polycaprolactone/Gelatin-Based Electrospun Nanofibers with Antibacterial Properties

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Lor Huai Chong ◽  
Mim Mim Lim ◽  
Naznin Sultana
Keyword(s):  
Drug Loading ◽  
Antibacterial Properties ◽  
Electrospun Nanofibers ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Electrospinning Technique ◽  
Water Contact ◽  
Nanofibrous Scaffolds ◽  
Model Drug

Nanofibrous scaffolds were fabricated through blending of a synthetic polymer, polycaprolactone (PCL), and a natural polymer, gelatin (GE), using an electrospinning technique. Processing and solution parameters were optimized to determine the suitable properties of PCL/GE-based nanofibers. Several characterizations were conducted to determine surface morphology by scanning electron microscopy (SEM), wettability using water contact angle measurement, and chemical bonding analysis using attenuated total reflectance (ATR) of PCL/GE-based nanofibers. Experimental results showed that 14% (w/v) PCL/GE with a flow rate of 0.5 mL/h and 18 kV demonstrated suitable properties. This nanofiber was then further investigated for itsin vitrodegradation, drug loading (using a model drug, tetracycline hydrochloride), and antibacterial testing (using zone inhibition method).

Carbon Dots for Bacterial Detection and Antibacterial Applications-A Minireview

2020 ◽  
Vol 25 (46) ◽  
pp. 4848-4860 ◽  
Author(s):  
Anisha Anand ◽  
Gopinathan Manavalan ◽  
Ranju Prasad Mandal ◽  
Huan-Tsung Chang ◽  
Yi-Ru Chiou ◽  
...  
Keyword(s):  
Optical Properties ◽  
Carbon Dots ◽  
Antibacterial Effect ◽  
Bacterial Detection ◽  
High Brightness ◽  
Photo Catalysis ◽  
Wide Range ◽  
Prevention And Treatment ◽  
Low Toxicity ◽  
Conventional Antibiotics

: The prevention and treatment of various infections caused by microbes through antibiotics are becoming less effective due to antimicrobial resistance. Researches are focused on antimicrobial nanomaterials to inhibit bacterial growth and destroy the cells, to replace conventional antibiotics. Recently, carbon dots (C-Dots) become attractive candidates for a wide range of applications, including the detection and treatment of pathogens. In addition to low toxicity, ease of synthesis and functionalization, and high biocompatibility, C-Dots show excellent optical properties such as multi-emission, high brightness, and photostability. C-Dots have shown great potential in various fields, such as biosensing, nanomedicine, photo-catalysis, and bioimaging. This review focuses on the origin and synthesis of various C-Dots with special emphasis on bacterial detection, the antibacterial effect of CDots, and their mechanism.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Nanometals-Containing Polymeric Membranes for Purification Processes

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 513
Author(s):  
Anna Rabajczyk ◽  
Maria Zielecka ◽  
Krzysztof Cygańczuk ◽  
Łukasz Pastuszka ◽  
Leszek Jurecki
Keyword(s):  
Synergistic Effects ◽  
Membrane Surface ◽  
Antibacterial Properties ◽  
Polymeric Membranes ◽  
Treatment Processes ◽  
Wide Range ◽  
Different Types ◽  
Type Size ◽  
Titanium Zinc ◽  
Membrane Surface Charge

A recent trend in the field of membrane research is the incorporation of nanoparticles into polymeric membranes, which could produce synergistic effects when using different types of materials. This paper discusses the effect of the introduction of different nanometals such as silver, iron, silica, aluminum, titanium, zinc, and copper and their oxides on the permeability, selectivity, hydrophilicity, conductivity, mechanical strength, thermal stability, and antiviral and antibacterial properties of polymeric membranes. The effects of nanoparticle physicochemical properties, type, size, and concentration on a membrane’s intrinsic properties such as pore morphology, porosity, pore size, hydrophilicity/hydrophobicity, membrane surface charge, and roughness are discussed, and the performance of nanocomposite membranes in terms of flux permeation, contaminant rejection, and antifouling capability are reviewed. The wide range of nanocomposite membrane applications including desalination and removal of various contaminants in water-treatment processes are discussed.

Nanomaterials as drug delivery systems with antibacterial properties: current trends and future priorities

2021 ◽  
Author(s):  
Khatereh Khorsandi ◽  
Reza Hosseinzadeh ◽  
Homa Sadat Esfahani ◽  
Saeedeh Keyvani-Ghamsari ◽  
Saeed Ur Rahman
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Antibacterial Properties ◽  
Delivery Systems ◽  
Current Trends

scholarly journals Recent Attempts in the Design of Efficient PVC Plasticizers with Reduced Migration

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 844
Author(s):  
Joanna Czogała ◽  
Ewa Pankalla ◽  
Roman Turczyn
Keyword(s):  
Mechanical Properties ◽  
Partial Replacement ◽  
Total Replacement ◽  
Current Trends ◽  
Poly Vinyl Chloride ◽  
Wide Range ◽  
Migration Resistance ◽  
Secondary Plasticizer ◽  
New Compounds ◽  
Ethylhexyl Phthalate

This paper reviews the current trends in replacing commonly used plasticizers in poly(vinyl chloride), PVC, formulations by new compounds with reduced migration, leading to the enhancement in mechanical properties and better plasticizing efficiency. Novel plasticizers have been divided into three groups depending on the replacement strategy, i.e., total replacement, partial replacement, and internal plasticizers. Chemical and physical properties of PVC formulations containing a wide range of plasticizers have been compared, allowing observance of the improvements in polymer performance in comparison to PVC plasticized with conventionally applied bis(2-ethylhexyl) phthalate, di-n-octyl phthalate, bis(2-ethylhexyl) terephthalate and di-n-octyl terephthalate. Among a variety of newly developed plasticizers, we have indicated those presenting excellent migration resistance and advantageous mechanical properties, as well as those derived from natural sources. A separate chapter has been dedicated to the description of a synergistic effect of a mixture of two plasticizers, primary and secondary, that benefits in migration suppression when secondary plasticizer is added to PVC blend.

scholarly journals A Novel Design of Tri-Layer Membrane with Controlled Delivery of Paclitaxel and Anti-Biofilm Effect for Biliary Stent Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 486
Author(s):  
Abdelrahman I. Rezk ◽  
Jeesoo Park ◽  
Joon Yeon Moon ◽  
Sunny Lee ◽  
Chan Hee Park ◽  
...  
Keyword(s):  
Sustained Release ◽  
Antibacterial Effect ◽  
Release Profile ◽  
Biliary Stent ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Dual Function ◽  
Electrospinning Technique ◽  
Layer Membrane

Here, we developed a novel biliary stent coating material that is composed of tri-layer membrane with dual function of sustained release of paclitaxel (PTX) anticancer drug and antibacterial effect. The advantages of using electrospinning technique were considered for the even distribution of PTX and controlled release profile from the nanofiber mat. Furthermore, film cast method was utilized to fabricate AgNPs-immobilized PU film to direct the release towards the tumor site and suppress the biofilm formation. The in vitro antibacterial test conducted against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria species showed excellent antibacterial effect. The in vitro drug release study confirmed the sustained release of PTX from the tri-layer membrane and the release profile fitted first order with correlation coefficient of R2 = 0.98. Furthermore, the release mechanism was studied using Korsmeyer–Peppas model, revealing that the release mechanism follows Fickian diffusion. Based on the results, this novel tri-layer membrane shows curative potential in clinical development.

Development and characterization of electrospun curcumin-loaded antimicrobial nanofibrous membranes

2020 ◽  
pp. 004051752092551
Author(s):  
Javeed A Awan ◽  
Saif Ur Rehman ◽  
Muhammad Kashif Bangash ◽  
Fiaz Hussain ◽  
Jean-Noël Jaubert
Keyword(s):  
Biological Activities ◽  
Research Work ◽  
Medical Applications ◽  
Electrospinning Technique ◽  
Naturally Occurring ◽  
Wide Range ◽  
Nanofibrous Membranes ◽  
Antimicrobial Barrier ◽  
Anti Hiv

Curcumin is a naturally occurring hydrophobic polyphenol compound. It exhibits a wide range of biological activities such as antibacterial, anti-inflammatory, anti-carcinogenic, antifungal, anti-HIV, and antimicrobial activity. In this research work, antimicrobial curcumin nanofibrous membranes are produce by an electrospinning technique using the Eudragit RS 100 (C19H34ClNO6) polymer solution enriched with curcumin. The morphology and chemistry of the membrane are analyzed using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Kirby Bauer disk diffusion tests are carried out to examine the antibacterial effectiveness of the membrane. Experimental results show that the nanofibers produced are of uniform thickness morphology and curcumin is successfully incorporated into the nanofibrous mat, while no chemical bonding was observed between curcumin and the polymer. The antimicrobial curcumin nanofibrous membranes can be effectively applied as antimicrobial barrier in a wide variety of medical applications such as wound healing, scaffolds, and tissue engineering.

A Zn azelate MOF: combining antibacterial effect

CrystEngComm ◽  
2015 ◽  
Vol 17 (2) ◽  
pp. 456-462 ◽  
Author(s):  
C. Tamames-Tabar ◽  
E. Imbuluzqueta ◽  
N. Guillou ◽  
C. Serre ◽  
S. R. Miller ◽  
...  
Keyword(s):  
Antibacterial Effect ◽  
Metal Organic Framework ◽  
Antibacterial Properties ◽  
Metal Organic ◽  
Organic Framework

A novel biocompatible and bioactive zinc azelate metal–organic framework (BioMIL-5) was hydrothermally synthesized with interesting long-term antibacterial properties.

Sign in / Sign up

Export Citation Format

Share Document