scholarly journals Impacts of Green Vegetation Fraction Derivation Methods on Regional Climate Simulations

Atmosphere ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 281 ◽  
Author(s):  
Jose Manuel Jiménez-Gutiérrez ◽  
Francisco Valero ◽  
Sonia Jerez ◽  
Juan Pedro Montávez
Keyword(s):  
Land Surface ◽  
Vegetation Index ◽  
Climate Models ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Spatial Average ◽  
Area Index ◽  
Near Surface ◽  
Vegetation Fraction ◽  
Selection Of

The representation of vegetation in land surface models (LSM) is crucial for modeling atmospheric processes in regional climate models (RCMs). Vegetation is characterized by the green fractional vegetation cover (FVC) and/or the leaf area index (LAI) that are obtained from nearest difference vegetation index (NDVI) data. Most regional climate models use a constant FVC for each month and grid cell. In this work, three FVC datasets have been constructed using three methods: ZENG, WETZEL and GUTMAN. These datasets have been implemented in a RCM to explore, through sensitivity experiments over the Iberian Peninsula (IP), the effects of the differences among the FVC data-sets on the near surface temperature (T2m). Firstly, we noted that the selection of the NDVI database is of crucial importance, because there are important bias in mean and variability among them. The comparison between the three methods extracted from the same NDVI database, the global inventory modeling and mapping studies (GIMMS), reveals important differences reaching up to 12% in spatial average and and 35% locally. Such differences depend on the FVC magnitude and type of biome. The methods that use the frequency distribution of NDVI (ZENG and GUTMAN) are more similar, and the differences mainly depends on the land type. The comparison of the RCM experiments exhibits a not negligible effect of the FVC uncertainty on the monthly T2m values. Differences of 30% in FVC can produce bias of 1 ∘ C in monthly T2m, although they depend on the time of the year. Therefore, the selection of a certain FVC dataset will introduce bias in T2m and will affect the annual cycle. On the other hand, fixing a FVC database, the use of synchronized FVC instead of climatological values produces differences up to 1 ∘ C, that will modify the T2m interannual variability.

Hydrological simulations in the Rhine basin

2005 ◽  
Vol 51 (5) ◽  
pp. 1-4
Author(s):  
B. van den Hurk ◽  
J. Beersma ◽  
G. Lenderink
Keyword(s):  
Land Surface ◽  
Climate Models ◽  
Global Climate ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Global Climate Models ◽  
Rhine River ◽  
Rhine Basin ◽  
The Impact ◽  
Selection Of

Simulations with regional climate models (RCMs), carried out for the Rhine basin, have been analyzed in the context of implications of the possible future discharge of the Rhine river. In a first analysis, the runoff generated by the RCMs is compared to observations, in order to detect the way the RCMs treat anomalies in precipitation in their land surface component. A second analysis is devoted to the frequency distribution of area averaged precipitation, and the impact of selection of various driving global climate models.

scholarly journals The regional impact of urban emissions on air quality in Europe: the role of the urban canopy effects

2021 ◽  
Vol 21 (18) ◽  
pp. 14309-14332
Author(s):  
Peter Huszar ◽  
Jan Karlický ◽  
Jana Marková ◽  
Tereza Nováková ◽  
Marina Liaskoni ◽  
...  
Keyword(s):  
Air Quality ◽  
Land Surface ◽  
Climate Models ◽  
Regional Climate ◽  
Regional Scale ◽  
Urban Canopy ◽  
Regional Climate Models ◽  
Near Surface ◽  
Urban Emissions ◽  
The Impact

Abstract. Urban areas are hot spots of intense emissions, and they influence air quality not only locally but on a regional or even global scale. The impact of urban emissions over different scales depends on the dilution and chemical transformation of the urban plumes which are governed by the local- and regional-scale meteorological conditions. These are influenced by the presence of urbanized land surface via the so-called urban canopy meteorological forcing (UCMF). In this study, we investigate for selected central European cities (Berlin, Budapest, Munich, Prague, Vienna and Warsaw) how the urban emission impact (UEI) is modulated by the UCMF for present-day climate conditions (2015–2016) using two regional climate models, the regional climate models RegCM and Weather Research and Forecasting model coupled with Chemistry (WRF-Chem; its meteorological part), and two chemistry transport models, Comprehensive Air Quality Model with Extensions (CAMx) coupled to either RegCM and WRF and the “chemical” component of WRF-Chem. The UCMF was calculated by replacing the urbanized surface by a rural one, while the UEI was estimated by removing all anthropogenic emissions from the selected cities. We analyzed the urban-emission-induced changes in near-surface concentrations of NO2, O3 and PM2.5. We found increases in NO2 and PM2.5 concentrations over cities by 4–6 ppbv and 4–6 µg m−3, respectively, meaning that about 40 %–60 % and 20 %–40 % of urban concentrations of NO2 and PM2.5 are caused by local emissions, and the rest is the result of emissions from the surrounding rural areas. We showed that if UCMF is included, the UEI of these pollutants is about 40 %–60 % smaller, or in other words, the urban emission impact is overestimated if urban canopy effects are not taken into account. In case of ozone, models due to UEI usually predict decreases of around −2 to −4 ppbv (about 10 %–20 %), which is again smaller if UCMF is considered (by about 60 %). We further showed that the impact on extreme (95th percentile) air pollution is much stronger, and the modulation of UEI is also larger for such situations. Finally, we evaluated the contribution of the urbanization-induced modifications of vertical eddy diffusion to the modulation of UEI and found that it alone is able to explain the modeled decrease in the urban emission impact if the effects of UCMF are considered. In summary, our results showed that the meteorological changes resulting from urbanization have to be included in regional model studies if they intend to quantify the regional footprint of urban emissions. Ignoring these meteorological changes can lead to the strong overestimation of UEI.

Regional Climate Model Inter-Comparison for Antarctica within a Data Science Framework

2021 ◽  
Author(s):  
Jeremy Carter ◽  
Amber Leeson ◽  
Andrew Orr ◽  
Christoph Kittel ◽  
Melchior van Wessem
Keyword(s):  
Regional Climate Model ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Future Climate Change ◽  
Near Surface ◽  
Virtual Lab ◽  
Model Variability ◽  
The Antarctic

<p>Understanding the surface climatology of the Antarctic ice sheet is essential if we are to adequately predict its response to future climate change. This includes both primary impacts such as increased ice melting and secondary impacts such as ice shelf collapse events. Given its size, and inhospitable environment, weather stations on Antarctica are sparse. Thus, we rely on regional climate models to 1) develop our understanding of how the climate of Antarctica varies in both time and space and 2) provide data to use as context for remote sensing studies and forcing for dynamical process models. Given that there are a number of different regional climate models available that explicitly simulate Antarctic climate, understanding inter- and intra model variability is important.</p><p>Here, inter- and intra-model variability in Antarctic-wide regional climate model output is assessed for: snowfall; rainfall; snowmelt and near-surface air temperature within a cloud-based virtual lab framework. State-of-the-art regional climate model runs from the Antarctic-CORDEX project using the RACMO, MAR and MetUM models are used, together with the ERA5 and ERA-Interim reanalyses products. Multiple simulations using the same model and domain boundary but run at either different spatial resolutions or with different driving data are used. Traditional analysis techniques are exploited and the question of potential added value from more modern and involved methods such as the use of Gaussian Processes is investigated. The advantages of using a virtual lab in a cloud based environment for increasing transparency and reproducibility, are demonstrated, with a view to ultimately make the code and methods used widely available for other research groups.</p>

scholarly journals Effects of Forest Changes on Summer Surface Temperature in Changbai Mountain, China

Forests ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1551
Author(s):  
Jiaqi Zhang ◽  
Xiangjin Shen ◽  
Yanji Wang ◽  
Ming Jiang ◽  
Xianguo Lu
Keyword(s):  
Climate Change ◽  
Surface Temperature ◽  
Land Surface ◽  
Climate Models ◽  
Regional Climate ◽  
Changbai Mountain ◽  
Vegetation Coverage ◽  
Area Index ◽  
Forest Coverage ◽  
Cooling Effects

The area and vegetation coverage of forests in Changbai Mountain of China have changed significantly during the past decades. Understanding the effects of forests and forest coverage change on regional climate is important for predicting climate change in Changbai Mountain. Based on the satellite-derived land surface temperature (LST), albedo, evapotranspiration, leaf area index, and land-use data, this study analyzed the influences of forests and forest coverage changes on summer LST in Changbai Mountain. Results showed that the area and vegetation coverage of forests increased in Changbai Mountain from 2003 to 2017. Compared with open land, forests could decrease the summer daytime LST (LSTD) and nighttime LST (LSTN) by 1.10 °C and 0.07 °C, respectively. The increase in forest coverage could decrease the summer LSTD and LSTN by 0.66 °C and 0.04 °C, respectively. The forests and increasing forest coverage had cooling effects on summer temperature, mainly by decreasing daytime temperature in Changbai Mountain. The daytime cooling effect is mainly related to the increased latent heat flux caused by increasing evapotranspiration. Our results suggest that the effects of forest coverage change on climate should be considered in climate models for accurately simulating regional climate change in Changbai Mountain of China.

scholarly journals Regional Climate Model Emulator based on Deep Learning: Concept and First Evaluation of a Novel Hybrid Downscaling Approach

2021 ◽  
Author(s):  
Antoine Doury ◽  
Samuel Somot ◽  
Sébastien Gadat ◽  
Aurélien Ribes ◽  
Lola Corre
Keyword(s):  
Climate Change ◽  
Network Architecture ◽  
Large Scale ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Regional Climate Models ◽  
Future Climate ◽  
Near Surface ◽  
The Way

Abstract Providing reliable information on climate change at local scale remains a challenge of first importance for impact studies and policymakers. Here, we propose a novel hybrid downscaling method combining the strengths of both empirical statistical downscaling methods and Regional Climate Models (RCMs). The aim of this tool is to enlarge the size of high-resolution RCM simulation ensembles at low cost.We build a statistical RCM-emulator by estimating the downscaling function included in the RCM. This framework allows us to learn the relationship between large-scale predictors and a local surface variable of interest over the RCM domain in present and future climate. Furthermore, the emulator relies on a neural network architecture, which grants computational efficiency. The RCM-emulator developed in this study is trained to produce daily maps of the near-surface temperature at the RCM resolution (12km). The emulator demonstrates an excellent ability to reproduce the complex spatial structure and daily variability simulated by the RCM and in particular the way the RCM refines locally the low-resolution climate patterns. Training in future climate appears to be a key feature of our emulator. Moreover, there is a huge computational benefit in running the emulator rather than the RCM, since training the emulator takes about 2 hours on GPU, and the prediction is nearly instantaneous. However, further work is needed to improve the way the RCM-emulator reproduces some of the temperature extremes, the intensity of climate change, and to extend the proposed methodology to different regions, GCMs, RCMs, and variables of interest.

Impact of GVF Derivation Methods on Noah Land Surface Model Simulations and WRF Model Forecasts

2018 ◽  
Vol 19 (12) ◽  
pp. 1917-1933 ◽  
Author(s):  
Li Fang ◽  
Xiwu Zhan ◽  
Christopher R. Hain ◽  
Jifu Yin ◽  
Jicheng Liu
Keyword(s):  
Land Surface ◽  
Vegetation Index ◽  
Weather Prediction ◽  
Wrf Model ◽  
Land Surface Model ◽  
Surface Model ◽  
Area Index ◽  
Vegetation Fraction ◽  
Data Products ◽  
Noah Land Surface Model

Abstract Green vegetation fraction (GVF) plays a crucial role in the atmosphere–land water and energy exchanges. It is one of the essential parameters in the Noah land surface model (LSM) that serves as the land component of a number of operational numerical weather prediction models at the National Centers for Environmental Prediction (NCEP) of NOAA. The satellite GVF products used in NCEP models are derived from a simple linear conversion of either the normalized difference vegetation index (NDVI) from the Advanced Very High Resolution Radiometer (AVHRR) currently or the enhanced vegetation index (EVI) from the Visible Infrared Imaging Radiometer Suite (VIIRS) planned for the near future. Since the NDVI or EVI is a simple spectral index of vegetation cover, GVFs derived from them may lack the biophysical meaning required in the Noah LSM. Moreover, the NDVI- or EVI-based GVF data products may be systematically biased over densely vegetated regions resulting from the saturation issue associated with spectral vegetation indices. On the other hand, the GVF is physically related to the leaf area index (LAI), and thus it could be beneficial to derive GVF from LAI data products. In this paper, the EVI-based and the LAI-based GVF derivation methods are mathematically analyzed and are found to be significantly different from each other. Impacts of GVF differences on the Noah LSM simulations and on weather forecasts of the Weather Research and Forecasting (WRF) Model are further assessed. Results indicate that LAI-based GVF outperforms the EVI-based one when used in both the offline Noah LSM and WRF Model.

scholarly journals ECOCLIMAP-II/Europe: a twofold database of ecosystems and surface parameters at 1 km resolution based on satellite information for use in land surface, meteorological and climate models

2013 ◽  
Vol 6 (2) ◽  
pp. 563-582 ◽  
Author(s):  
S. Faroux ◽  
A. T. Kaptué Tchuenté ◽  
J.-L. Roujean ◽  
V. Masson ◽  
E. Martin ◽  
...  
Keyword(s):  
Land Cover ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Land Surface ◽  
Urban Areas ◽  
Vegetation Index ◽  
Climate Models ◽  
Area Index ◽  
Surface Parameters ◽  
Climatic Environment

Abstract. The overall objective of the present study is to introduce the new ECOCLIMAP-II database for Europe, which is an upgrade for this region of the former initiative, ECOCLIMAP-I, already implemented at global scale. The ECOCLIMAP programme is a dual database at 1 km resolution that includes an ecosystem classification and a coherent set of land surface parameters that are primarily mandatory in meteorological modelling (notably leaf area index and albedo). Hence, the aim of this innovative physiography is to enhance the quality of initialisation and impose some surface attributes within the scope of weather forecasting and climate related studies. The strategy for implementing ECOCLIMAP-II is to depart from prevalent land cover products such as CLC2000 (Corine Land Cover) and GLC2000 (Global Land Cover) by splitting existing classes into new classes that possess a better regional character by virtue of the climatic environment (latitude, proximity to the sea, topography). The leaf area index (LAI) from MODIS and normalized difference vegetation index (NDVI) from SPOT/Vegetation (a global monitoring system of vegetation) yield the two proxy variables that were considered here in order to perform a multi-year trimmed analysis between 1999 and 2005 using the K-means method. Further, meteorological applications require each land cover type to appear as a partition of fractions of 4 main surface types or tiles (nature, water bodies, sea, urban areas) and, inside the nature tile, fractions of 12 plant functional types (PFTs) representing generic vegetation types – principally broadleaf forest, needleleaf forest, C3 and C4 crops, grassland and bare land – as incorporated by the SVAT model ISBA (Interactions Surface Biosphere Atmosphere) developed at Météo France. This landscape division also forms the cornerstone of a validation exercise. The new ECOCLIMAP-II can be verified with auxiliary land cover products at very fine and coarse resolutions by means of versatile land occupation nomenclatures.

scholarly journals Land-atmosphere interactions in sub-polar and alpine climates in the CORDEX FPS LUCAS models: Part II. The role of changing vegetation

2021 ◽  
Author(s):  
Priscilla A. Mooney ◽  
Diana Rechid ◽  
Edouard L. Davin ◽  
Eleni Katragkou ◽  
Natalie de Noblet-Ducoudré ◽  
...  
Keyword(s):  
Land Cover ◽  
Land Surface ◽  
Climate Models ◽  
Regional Climate ◽  
Model Development ◽  
Regional Climate Models ◽  
Sensitivity Index ◽  
Land Surface Models ◽  
Snow Albedo ◽  
Surface Models

Abstract. Land cover in sub-polar and alpine regions of northern and eastern Europe have already begun changing due to natural and anthropogenic changes such as afforestation. This will impact the regional climate and hydrology upon which societies in these regions are highly reliant. This study aims to identify the impacts of afforestation/reforestation (hereafter afforestation) on snow and the snow-albedo effect, and highlight potential improvements for future model development. The study uses an ensemble of nine regional climate models for two different idealised experiments covering a 30-year period; one experiment replaces most land cover in Europe with forest while the other experiment replaces all forested areas with grass. The ensemble consists of nine regional climate models composed of different combinations of five regional atmospheric models and six land surface models. Results show that afforestation reduces the snow-albedo sensitivity index and enhances snow melt. While the direction of change is robustly modelled, there is still uncertainty in the magnitude of change. Greatest differences between models emerge in the snowmelt season. One regional climate model uses different land surface models which shows consistent changes between the three simulations during the accumulation period but differs in the snowmelt season. Together these results point to the need for further model development in representing both grass-snow and forest-snow interactions during the snowmelt season. Pathways to accomplishing this include 1) a more sophisticated representation of forest structure, 2) kilometer scale simulations, and 3) more observational studies on vegetation-snow interactions in Northern Europe.

Evaluation of MM5 and HadGEM3-RA hindcast in the CORDEX East Asia Phase Ⅱ: near-surface air temperature

2020 ◽  
Author(s):  
Seok-Woo Shin ◽  
Dong-Hyun Cha ◽  
Taehyung Kim ◽  
Gayoung Kim ◽  
Changyoung Park ◽  
...  
Keyword(s):  
East Asia ◽  
Air Temperature ◽  
Climate Models ◽  
Extreme Values ◽  
Regional Climate ◽  
Surface Air Temperature ◽  
Regional Climate Models ◽  
Near Surface ◽  
The Mean ◽  
Cordex East Asia

<p>Extreme temperature can have a devastating impact on the ecological environment (i.e., human health and crops) and the socioeconomic system. To adapt to and cope with the rapidly changing climate, it is essential to understand the present climate and to estimate the future change in terms of temperature. In this study, we evaluate the characteristics of near-surface air temperature (SAT) simulated by two regional climate models (i.e., MM5 and HadGEM3-RA) over East Asia, focusing on the mean and extreme values. To analyze extreme climate, we used the indices for daily maximum (Tmax) and minimum (Tmin) temperatures among the developed Expert Team on Climate Change Detection and Indices (ETCCDI) indices. In the results of the CORDEX-East Asia phase Ⅰ, the mean and extreme values of SAT for DJF (JJA) tend to be colder (warmer) than observation data over the East Asian region. In those of CORDEX-East Asia phase Ⅱ, the mean and extreme values of SAT for DJF and JJA have warmer than those of the CORDEX-East Asia phase Ⅰ except for those of HadGEM3-RA for DJF. Furthermore, the Extreme Temperature Range (ETR, maximum value of Tmax - minimum value of Tmin) of CORDEX-East Asia phase Ⅰ data, which are significantly different from those of observation data, are reduced in that of CORDEX-East Asia phase Ⅱ. Consequently, the high-resolution regional climate models play a role in the improvement of the cold bias having the relatively low-resolution ones. To understand the reasons for the improved and weak points of regional climate models, we investigated the atmospheric field (i.e., flow, air mass, precipitation, and radiation) influencing near-surface air temperature. Model performances for SAT over East Asia were influenced by the expansion of the western North Pacific subtropical high and the location of convective precipitation in JJA and by the contraction of the Siberian high, the spatial distribution of snowfall and associated upwelling longwave radiation in DJF.</p>

scholarly journals Human influence on European winter wind storms such as those of January 2018

2019 ◽  
Vol 10 (2) ◽  
pp. 271-286 ◽  
Author(s):  
Robert Vautard ◽  
Geert Jan van Oldenborgh ◽  
Friederike E. L. Otto ◽  
Pascal Yiou ◽  
Hylke de Vries ◽  
...  
Keyword(s):  
Climate Change ◽  
Surface Roughness ◽  
Western Europe ◽  
Climate Models ◽  
Decadal Variability ◽  
Regional Climate ◽  
Surface Wind ◽  
Regional Climate Models ◽  
Surface Wind Speed ◽  
Near Surface

Abstract. Several major storms pounded western Europe in January 2018, generating large damages and casualties. The two most impactful ones, Eleanor and Friederike, are analysed here in the context of climate change. Near surface wind speed station observations exhibit a decreasing trend in the frequency of strong winds associated with such storms. High-resolution regional climate models, on the other hand, show no trend up to now and a small increase in storminess in future due to climate change. This shows that factors other than climate change, which are not in the climate models, caused the observed decline in storminess over land. A large part is probably due to increases in surface roughness, as shown for a small set of stations covering the Netherlands and in previous studies. This observed trend could therefore be independent from climate evolution. We concluded that human-induced climate change has had so far no significant influence on storms like the two mentioned. However, all simulations indicate that global warming could lead to a marginal increase (0 %–20 %) in the probability of extreme hourly winds until the middle of the century, consistent with previous modelling studies. This excludes other factors, such as surface roughness, aerosols, and decadal variability, which have up to now caused a much larger negative trend. Until these factors are correctly simulated by climate models, we cannot give credible projections of future storminess over land in Europe.

Sign in / Sign up

Export Citation Format

Share Document