scholarly journals Comparison of Anthropogenic Aerosol Climate Effects among Three Climate Models with Reduced Complexity

Atmosphere ◽  
2019 ◽  
Vol 10 (8) ◽  
pp. 456 ◽  
Author(s):  
Xiangjun Shi ◽  
Wentao Zhang ◽  
Jiaojiao Liu
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Reliable Estimate ◽  
Anthropogenic Aerosol ◽  
Climate Effects ◽  
Cloud Forcing ◽  
Radiative Forcings ◽  
Ensemble Simulations ◽  
Aerosol Forcing ◽  
The Difference

The same prescribed anthropogenic aerosol forcing was implemented into three climate models. The atmosphere components of these participating climate models were the GAMIL, ECHAM, and CAM models. Ensemble simulations were carried out to obtain a reliable estimate of anthropogenic aerosol effective radiative forcing (ERF). The ensemble mean ERFs from these three participating models with this aerosol forcing were −0.27, −0.63, and −0.54 W∙m−2. The model diversity in ERF is clearly reduced as compared with those based on the models’ own default approaches (−1.98, −0.21, and −2.22 W∙m−2). This is consistent with the design of this aerosol forcing. The modeled ERF can be decomposed into two basic components, i.e., the instantaneous radiative forcing (RF) from aerosol–radiation interactions (RFari) and the aerosol-induced changes in cloud forcing (△Fcloud*). For the three participating models, the model diversity in RFari (−0.21, −0.33, and −0.29 W∙m−2) could be constrained by reducing the differences in natural aerosol radiative forcings. However, it was difficult to figure out the reason for the model diversity in △Fcloud* (−0.05, −0.28, and −0.24 W∙m−2), which was the dominant source of the model diversity in ERF. The variability of modeled ERF was also studied. Ensemble simulations showed that the modeled RFs were very stable. The rapid adjustments (ERF − RF) had an important role to play in the quantification of the perturbation of ERF. Fortunately, the contribution from the rapid adjustments to the mean ERF was very small. This study also showed that we should pay attention to the difference between the aerosol climate effects we want and the aerosol climate effects we calculate.

scholarly journals Reply to “Comment on ‘Rethinking the Lower Bound on Aerosol Radiative Forcing’”

2017 ◽  
Vol 30 (16) ◽  
pp. 6585-6589 ◽  
Author(s):  
Bjorn Stevens ◽  
Stephanie Fiedler
Keyword(s):  
Twentieth Century ◽  
Lower Bound ◽  
Radiative Forcing ◽  
Climate Models ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Aerosol Radiative Forcing ◽  
Clear Sky ◽  
The North ◽  
Aerosol Forcing

Kretzschmar et al., in a comment in 2017, use the spread in the output of aerosol–climate models to argue that the models refute the hypothesis (presented in a paper by Stevens in 2015) that for the mid-twentieth-century warming to be consistent with observations, then the present-day aerosol forcing, [Formula: see text] must be less negative than −1 W m−2. The main point of contention is the nature of the relationship between global SO2 emissions and [Formula: see text] In contrast to the concave (log-linear) relationship used by Stevens and in earlier studies, whereby [Formula: see text] becomes progressively less sensitive to SO2 emissions, some models suggest a convex relationship, which would imply a less negative lower bound. The model that best exemplifies this difference, and that is most clearly in conflict with the hypothesis of Stevens, does so because of an implausible aerosol response to the initial rise in anthropogenic aerosol precursor emissions in East and South Asia—already in 1975 this model’s clear-sky reflectance from anthropogenic aerosol over the North Pacific exceeds present-day estimates of the clear-sky reflectance by the total aerosol. The authors perform experiments using a new (observationally constrained) climatology of anthropogenic aerosols to further show that the effects of changing patterns of aerosol and aerosol precursor emissions during the late twentieth century have, for the same global emissions, relatively little effect on [Formula: see text] These findings suggest that the behavior Kretzschmar et al. identify as being in conflict with the lower bound in Stevens arises from an implausible relationship between SO2 emissions and [Formula: see text] and thus provides little basis for revising this lower bound.

scholarly journals Anthropogenic aerosol forcing – insights from multiple estimates from aerosol-climate models with reduced complexity

2019 ◽  
Vol 19 (10) ◽  
pp. 6821-6841 ◽  
Author(s):  
Stephanie Fiedler ◽  
Stefan Kinne ◽  
Wan Ting Katty Huang ◽  
Petri Räisänen ◽  
Declan O'Donnell ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Coupled Model ◽  
Cloud Droplet ◽  
Internal Variability ◽  
Anthropogenic Aerosol ◽  
Aerosol Forcing ◽  
Effective Radiative Forcing ◽  
Absolute Magnitudes ◽  
Natural Aerosols

Abstract. This study assesses the change in anthropogenic aerosol forcing from the mid-1970s to the mid-2000s. Both decades had similar global-mean anthropogenic aerosol optical depths but substantially different global distributions. For both years, we quantify (i) the forcing spread due to model-internal variability and (ii) the forcing spread among models. Our assessment is based on new ensembles of atmosphere-only simulations with five state-of-the-art Earth system models. Four of these models will be used in the sixth Coupled Model Intercomparison Project (CMIP6; Eyring et al., 2016). Here, the complexity of the anthropogenic aerosol has been reduced in the participating models. In all our simulations, we prescribe the same patterns of the anthropogenic aerosol optical properties and associated effects on the cloud droplet number concentration. We calculate the instantaneous radiative forcing (RF) and the effective radiative forcing (ERF). Their difference defines the net contribution from rapid adjustments. Our simulations show a model spread in ERF from −0.4 to −0.9 W m−2. The standard deviation in annual ERF is 0.3 W m−2, based on 180 individual estimates from each participating model. This result implies that identifying the model spread in ERF due to systematic differences requires averaging over a sufficiently large number of years. Moreover, we find almost identical ERFs for the mid-1970s and mid-2000s for individual models, although there are major model differences in natural aerosols and clouds. The model-ensemble mean ERF is −0.54 W m−2 for the pre-industrial era to the mid-1970s and −0.59 W m−2 for the pre-industrial era to the mid-2000s. Our result suggests that comparing ERF changes between two observable periods rather than absolute magnitudes relative to a poorly constrained pre-industrial state might provide a better test for a model's ability to represent transient climate changes.

scholarly journals The effect of aerosol on surface cloud radiative forcing in the Arctic

2005 ◽  
Vol 5 (5) ◽  
pp. 9039-9063 ◽  
Author(s):  
R.-M. Hu ◽  
J.-P. Blanchet ◽  
E. Girard
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
High Surface ◽  
The Arctic ◽  
Cloud Radiative Forcing ◽  
Cloud Forcing ◽  
Aerosol Forcing ◽  
Albedo Effect

Abstract. Cloud radiative forcing is a very important concept to understand what kind of role the clouds play in climate change with thermal effect or albedo effect. In spite of that much progress has been achieved, the clouds are still poorly described in the climate models. Due to the complex aerosol-cloud-radiation interactions, high surface albedo of snow and ice cover, and without solar radiation in long period of the year, the Arctic strong warming caused by increasing greenhouse gases (as most GCMs suggested) has not been verified by the observations. In this study, we were dedicated to quantify the aerosol effect on the Arctic cloud radiative forcing by Northern Aerosol Regional Climate Model (NARCM). Major aerosol species such as Arctic haze sulphate, black carbon, sea salt, organics and dust have been included during our simulations. By inter-comparisons with the Atmospheric Radiation Measurement (ARM) data, we find surface cloud radiative forcing (SCRF) is −22 W/m2 for shortwave and 36 W/m2 for longwave. Total cloud forcing is 14 W/m2 with minimum of −35 W/m2 in early July. If aerosols are taken into account, the SCRF has been increased during winter while negative SCRF has been enhanced during summer. Our estimate of aerosol forcing is about −6 W/m2 in the Arctic.

scholarly journals Anthropogenic aerosol forcing – insights from multi-estimates from aerosol-climate models with reduced complexity

2018 ◽  
Author(s):  
Stephanie Fiedler ◽  
Stefan Kinne ◽  
W. T. Katty Huang ◽  
Petri Räisänen ◽  
Declan O'Donnell ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Coupled Model ◽  
Internal Variability ◽  
Anthropogenic Aerosol ◽  
Aerosol Forcing ◽  
Aerosol Distribution ◽  
Absolute Magnitudes ◽  
Small Change ◽  
Natural Aerosol

Abstract. The radiative forcing of anthropogenic aerosol remains a key uncertainty in the understanding of climate change. This study quantifies the model spread in aerosol forcing associated with (i) variability internal to the atmosphere and (ii) differences in the model representation of weather. We do so by performing ensembles of atmosphere-only simulations with four state-of-the-art Earth system models, three of which will be used in the sixth coupled model inter-comparison project (CMIP6, Eyring et al., 2016). In those models we reduce the complexity of the anthropogenic aerosol by prescribing the same annually-repeating patterns of the anthropogenic aerosol optical properties and associated effects on the cloud reflectivity. We quantify a comparably small model spread in the long-term averaged ERF compared to the overall possible range in annual ERF estimates associated with model-internal variability. This implies that identifying the true model spread in ERF associated with differences in the representation of meteorological processes and natural aerosol requires averaging over a sufficiently large number of annual estimates. We characterize the model diversity in clouds and use satellite products as benchmarks. Despite major inter-model differences in natural aerosol and clouds, all models show only a small change in the global-mean ERF due to the substantial change in the global anthropogenic aerosol distribution between the mid-1970s and mid-2000s, the ensemble mean ERF being −0.47 Wm−2 for the mid-1970s and −0.51 Wm−2 for the mid-2000s. This result suggests that inter-comparing ERF changes between two periods rather than absolute magnitudes relative to pre-industrial might provide a more stringent test for a model's ability for representing climate evolutions.

scholarly journals Relationship between Shortwave Cloud Radiative Forcing and Local Meteorological Variables Compared in Observations and Several Global Climate Models

2006 ◽  
Vol 19 (17) ◽  
pp. 4344-4359 ◽  
Author(s):  
Markus Stowasser ◽  
Kevin Hamilton
Keyword(s):  
Relative Humidity ◽  
Vertical Velocity ◽  
Radiative Forcing ◽  
Large Scale ◽  
Climate Models ◽  
Grid Point ◽  
Global Climate Models ◽  
Coupled Models ◽  
Cloud Radiative Forcing ◽  
Cloud Forcing

Abstract The relations between local monthly mean shortwave cloud radiative forcing and aspects of the resolved-scale meteorological fields are investigated in hindcast simulations performed with 12 of the global coupled models included in the model intercomparison conducted as part of the preparation for Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report (AR4). In particular, the connection of the cloud forcing over tropical and subtropical ocean areas with resolved midtropospheric vertical velocity and with lower-level relative humidity are investigated and compared among the models. The model results are also compared with observational determinations of the same relationships using satellite data for the cloud forcing and global reanalysis products for the vertical velocity and humidity fields. In the analysis the geographical variability in the long-term mean among all grid points and the interannual variability of the monthly mean at each grid point are considered separately. The shortwave cloud radiative feedback (SWCRF) plays a crucial role in determining the predicted response to large-scale climate forcing (such as from increased greenhouse gas concentrations), and it is thus important to test how the cloud representations in current climate models respond to unforced variability. Overall there is considerable variation among the results for the various models, and all models show some substantial differences from the comparable observed results. The most notable deficiency is a weak representation of the cloud radiative response to variations in vertical velocity in cases of strong ascending or strong descending motions. While the models generally perform better in regimes with only modest upward or downward motions, even in these regimes there is considerable variation among the models in the dependence of SWCRF on vertical velocity. The largest differences between models and observations when SWCRF values are stratified by relative humidity are found in either very moist or very dry regimes. Thus, the largest errors in the model simulations of cloud forcing are prone to be in the western Pacific warm pool area, which is characterized by very moist strong upward currents, and in the rather dry regions where the flow is dominated by descending mean motions.

scholarly journals Total aerosol effect: radiative forcing or radiative flux perturbation?

2009 ◽  
Vol 9 (6) ◽  
pp. 25633-25661 ◽  
Author(s):  
U. Lohmann ◽  
L. Rotstayn ◽  
T. Storelvmo ◽  
A. Jones ◽  
S. Menon ◽  
...  
Keyword(s):  
Global Warming ◽  
Radiative Forcing ◽  
Climate Models ◽  
Radiative Flux ◽  
Radiative Forcings ◽  
Microphysical Properties ◽  
Aerosol Effect ◽  
Rain Formation ◽  
Aerosol Radiative ◽  
Flux Perturbation

Abstract. Uncertainties in aerosol radiative forcings, especially those associated with clouds, contribute to a large extent to uncertainties in the total anthropogenic forcing. The interaction of aerosols with clouds and radiation introduces feedbacks which can affect the rate of rain formation. In former assessments of aerosol radiative forcings, these effects have not been quantified. Also, with global aerosol-climate models simulating interactively aerosols and cloud microphysical properties, a quantification of the aerosol forcings in the traditional way is difficult to properly define. Here we argue that fast feedbacks should be included because they act quickly compared with the time scale of global warming. We show that for different forcing agents (aerosols and greenhouse gases) the radiative forcings as traditionally defined agree rather well with estimates from a method, here referred to as radiative flux perturbations (RFP), that takes these fast feedbacks and interactions into account. Based on our results, we recommend RFP as a valid option to compare different forcing agents, and to compare the effects of particular forcing agents in different models.

scholarly journals Observational Constraint on Greenhouse Gas and Aerosol Contributions to Global Ocean Heat Content Changes

2020 ◽  
Vol 33 (24) ◽  
pp. 10579-10591
Author(s):  
Elodie Charles ◽  
Benoit Meyssignac ◽  
Aurélien Ribes
Keyword(s):  
Greenhouse Gas ◽  
Radiative Forcing ◽  
Climate Models ◽  
Ghg Emissions ◽  
Heat Content ◽  
Ocean Heat Content ◽  
Global Ocean ◽  
Detection And Attribution ◽  
Aerosol Forcing ◽  
Bivariate Method

AbstractObservations and climate models are combined to identify an anthropogenic warming signature in the upper ocean heat content (OHC) changes since 1971. We apply a new detection and attribution analysis developed by Ribes et al. that uses a symmetric treatment of the magnitude and the pattern of the climate response to each radiative forcing. A first estimate of the OHC response to natural, anthropogenic, greenhouse gas, and other forcings is derived from a large ensemble of CMIP5 simulations. Observational datasets from historical reconstructions are then used to constrain this estimate. A spatiotemporal observational mask is applied to compare simulations with actual observations and to overcome reconstruction biases. Results on the 0–700-m layer from 1971 to 2005 show that the global OHC would have increased since 1971 by 2.12 ± 0.21 × 107 J m−2 yr−1 in response to GHG emissions alone. But this has been compensated for by other anthropogenic influences (mainly aerosol), which induced an OHC decrease of 0.84 ± 0.18 × 107 J m−2 yr−1. The natural forcing has induced a slight global OHC decrease since 1971 of 0.13 ± 0.09 × 107 J m−2 yr−1. Compared to previous studies we have separated the effect of the GHG forcing from the effect of the other anthropogenic forcing on OHC changes. This has been possible by using a new detection and attribution (D&A) method and by analyzing simultaneously the global OHC trends over 1957–80 and over 1971–2005. This bivariate method takes advantage of the different time variation of the GHG forcing and the aerosol forcing since 1957 to separate both effects and reduce the uncertainty in their estimates.

scholarly journals Including the efficacy of land ice changes in deriving climate sensitivity from paleodata

2019 ◽  
Vol 10 (2) ◽  
pp. 333-345 ◽  
Author(s):  
Lennert B. Stap ◽  
Peter Köhler ◽  
Gerrit Lohmann
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Models ◽  
Co2 Concentration ◽  
Global Temperature ◽  
Maximum Temperature ◽  
Radiative Forcings ◽  
The Impact ◽  
The Last Glacial

Abstract. The equilibrium climate sensitivity (ECS) of climate models is calculated as the equilibrium global mean surface air warming resulting from a simulated doubling of the atmospheric CO2 concentration. In these simulations, long-term processes in the climate system, such as land ice changes, are not incorporated. Hence, climate sensitivity derived from paleodata has to be compensated for these processes, when comparing it to the ECS of climate models. Several recent studies found that the impact these long-term processes have on global temperature cannot be quantified directly through the global radiative forcing they induce. This renders the prevailing approach of deconvoluting paleotemperatures through a partitioning based on radiative forcings inaccurate. Here, we therefore implement an efficacy factor ε[LI] that relates the impact of land ice changes on global temperature to that of CO2 changes in our calculation of climate sensitivity from paleodata. We apply our refined approach to a proxy-inferred paleoclimate dataset, using ε[LI]=0.45-0.20+0.34 based on a multi-model assemblage of simulated relative influences of land ice changes on the Last Glacial Maximum temperature anomaly. The implemented ε[LI] is smaller than unity, meaning that per unit of radiative, forcing the impact on global temperature is less strong for land ice changes than for CO2 changes. Consequently, our obtained ECS estimate of 5.8±1.3 K, where the uncertainty reflects the implemented range in ε[LI], is ∼50 % higher than when differences in efficacy are not considered.

scholarly journals Influence of future air pollution mitigation strategies on total aerosol radiative forcing

2008 ◽  
Vol 8 (21) ◽  
pp. 6405-6437 ◽  
Author(s):  
S. Kloster ◽  
F. Dentener ◽  
J. Feichter ◽  
F. Raes ◽  
J. van Aardenne ◽  
...  
Keyword(s):  
Air Pollution ◽  
Radiative Forcing ◽  
Mitigation Strategies ◽  
Radiation Budget ◽  
Anthropogenic Aerosol ◽  
Aerosol Radiative Forcing ◽  
Pollution Mitigation ◽  
Aerosol Forcing ◽  
Future Air Pollution ◽  
Aerosol Radiative

Abstract. We apply different aerosol and aerosol precursor emission scenarios reflecting possible future control strategies for air pollution in the ECHAM5-HAM model, and simulate the resulting effect on the Earth's radiation budget. We use two opposing future mitigation strategies for the year 2030: one in which emission reduction legislation decided in countries throughout the world are effectively implemented (current legislation; CLE 2030) and one in which all technical options for emission reductions are being implemented independent of their cost (maximum feasible reduction; MFR 2030). We consider the direct, semi-direct and indirect radiative effects of aerosols. The total anthropogenic aerosol radiative forcing defined as the difference in the top-of-the-atmosphere radiation between 2000 and pre-industrial times amounts to −2.00 W/m2. In the future this negative global annual mean aerosol radiative forcing will only slightly change (+0.02 W/m2) under the "current legislation" scenario. Regionally, the effects are much larger: e.g. over Eastern Europe radiative forcing would increase by +1.50 W/m2 because of successful aerosol reduction policies, whereas over South Asia it would decrease by −1.10 W/m2 because of further growth of emissions. A "maximum feasible reduction" of aerosols and their precursors would lead to an increase of the global annual mean aerosol radiative forcing by +1.13 W/m2. Hence, in the latter case, the present day negative anthropogenic aerosol forcing could be more than halved by 2030 because of aerosol reduction policies and climate change thereafter will be to a larger extent be controlled by greenhouse gas emissions. We combined these two opposing future mitigation strategies for a number of experiments focusing on different sectors and regions. In addition, we performed sensitivity studies to estimate the importance of future changes in oxidant concentrations and the importance of the aerosol microphysical coupling within the range of expected future changes. For changes in oxidant concentrations caused by future air pollution mitigation, we do not find a significant effect for the global annual mean radiative aerosol forcing. In the extreme case of only abating SO2 or carbonaceous emissions to a maximum feasible extent, we find deviations from additivity for the radiative forcing over anthropogenic source regions up to 10% compared to an experiment abating both at the same time.

scholarly journals MACv2-SP: a parameterization of anthropogenic aerosol optical properties and an associated Twomey effect for use in CMIP6

2017 ◽  
Vol 10 (1) ◽  
pp. 433-452 ◽  
Author(s):  
Bjorn Stevens ◽  
Stephanie Fiedler ◽  
Stefan Kinne ◽  
Karsten Peters ◽  
Sebastian Rast ◽  
...  
Keyword(s):  
Optical Properties ◽  
Radiative Forcing ◽  
Industrial Emissions ◽  
Max Planck ◽  
Aerosol Optical Properties ◽  
Anthropogenic Aerosol ◽  
Aerosol Radiative Forcing ◽  
Clear Sky ◽  
Aerosol Forcing ◽  
Aerosol Radiative

Abstract. A simple plume implementation of the second version (v2) of the Max Planck Institute Aerosol Climatology, MACv2-SP, is described. MACv2-SP provides a prescription of anthropogenic aerosol optical properties and an associated Twomey effect. It was created to provide a harmonized description of post-1850 anthropogenic aerosol radiative forcing for climate modeling studies. MACv2-SP has been designed to be easy to implement, change and use, and thereby enable studies exploring the climatic effects of different patterns of aerosol radiative forcing, including a Twomey effect. MACv2-SP is formulated in terms of nine spatial plumes associated with different major anthropogenic source regions. The shape of the plumes is fit to the Max Planck Institute Aerosol Climatology, version 2, whose present-day (2005) distribution is anchored by surface-based observations. Two types of plumes are considered: one predominantly associated with biomass burning, the other with industrial emissions. These differ in the prescription of their annual cycle and in their optical properties, thereby implicitly accounting for different contributions of absorbing aerosol to the different plumes. A Twomey effect for each plume is prescribed as a change in the host model's background cloud-droplet population density using relationships derived from satellite data. Year-to-year variations in the amplitude of the plumes over the historical period (1850–2016) are derived by scaling the plumes with associated national emission sources of SO2 and NH3. Experiments using MACv2-SP are performed with the Max Planck Institute Earth System Model. The globally and annually averaged instantaneous and effective aerosol radiative forcings are estimated to be −0.6 and −0.5 W m−2, respectively. Forcing from aerosol–cloud interactions (the Twomey effect) offsets the reduction of clear-sky forcing by clouds, so that the net effect of clouds on the aerosol forcing is small; hence, the clear-sky forcing, which is more readily measurable, provides a good estimate of the total aerosol forcing.

Sign in / Sign up

Export Citation Format

Share Document