scholarly journals Recent Advances in Perylene Diimide-Based Active Materials in Electrical Mode Gas Sensing

Chemosensors ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 30
Author(s):  
Salman Ali ◽  
Akhil Gupta ◽  
Mahnaz Shafiei ◽  
Steven J. Langford
Keyword(s):  
Organic Solar Cells ◽  
Gas Sensing ◽  
Field Effect Transistors ◽  
Molecular Engineering ◽  
Future Research ◽  
Active Materials ◽  
Research Perspectives ◽  
Wide Range ◽  
Sensing Performance ◽  
Electrical Mode

This review provides an update on advances in the area of electrical mode sensors using organic small molecule n-type semiconductors based on perylene. Among small organic molecules, perylene diimides (PDIs) are an important class of materials due to their outstanding thermal, chemical, electronic, and optical properties, all of which make them promising candidates for a wide range of organic electronic devices including sensors, organic solar cells, organic field-effect transistors, and organic light-emitting diodes. This is mainly due to their electron-withdrawing nature and significant charge transfer properties. Perylene-based sensors of this type show high sensing performance towards various analytes, particularly reducing gases like ammonia and hydrazine, but there are several issues that need to be addressed including the selectivity towards a specific gas, the effect of relative humidity, and operating temperature. In this review, we focus on the strategies and design principles applied to the gas-sensing performance of PDI-based devices, including resistive sensors, amperometric sensors, and operating at room temperature. The device properties and sensing mechanisms for different analytes, focusing on hydrazine and ammonia, are studied in detail, and some future research perspectives are discussed for this promising field. We hope the discussed results and examples inspire new forms of molecular engineering and begin to open opportunities for other rylene diimide classes to be applied as active materials.

scholarly journals Oligofuran–Benzothiadiazole Co-oligomers: Synthesis, Optoelectronic Properties and Reactivity

2021 ◽  
Vol 03 (02) ◽  
pp. 303-308
Author(s):  
Dror Ben Abba Amiel ◽  
Choongik Kim ◽  
Ori Gidron
Keyword(s):  
Organic Solar Cells ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Organic Light Emitting Diodes ◽  
Organic Field Effect Transistors ◽  
Active Materials ◽  
Light Emitting ◽  
Organic Light ◽  
Donor Acceptor ◽  
Optical Bandgaps

Donor–acceptor–donor (DAD) triad systems are commonly applied as active materials in ambipolar organic field-effect transistors, organic solar cells, and NIR-emitting organic light-emitting diodes. Often, these triads utilize oligothiophenes as donors, whereas their oxygen-containing analogs, oligofurans, are far less studied in this setup. Here we introduce a family of DAD triads in which the donors are oligofurans and the acceptor is benzothiadiazole. In a combined computational and experimental study, we show that these triads display optical bandgaps similar to those of their thiophene analogs, and that a bifuran donor is sufficient to produce emission in the NIR spectral region. The presence of a central acceptor unit increases the photostability of oligofuran-based DAD systems compared with parent oligofurans of the similar length.

Enhanced gas sensing performance of tin dioxide-based nanoparticles for a wide range of concentrations of hydrogen gas

RSC Advances ◽  
2014 ◽  
Vol 4 (36) ◽  
pp. 18512 ◽  
Author(s):  
Pratanu Nag ◽  
Sanhita Majumdar ◽  
Ali Bumajdad ◽  
Parukuttyamma Sujatha Devi
Keyword(s):  
Tin Dioxide ◽  
Gas Sensing ◽  
Hydrogen Gas ◽  
Wide Range ◽  
Sensing Performance

Nanostructured WO3 based gas sensors: a short review

Sensor Review ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Srinivas Rao Sriram ◽  
Saidireddy Parne ◽  
Venkata Satya Chidambara Swamy Vaddadi ◽  
Damodar Edla ◽  
Nagaraju P. ◽  
...  
Keyword(s):  
Gas Sensors ◽  
Gas Sensing ◽  
Synthesis Method ◽  
Short Review ◽  
Future Research ◽  
Synthesis Methods ◽  
Content Type ◽  
Healthy Environment ◽  
Toxic Gases ◽  
Sensing Performance

Purpose This paper aims to focus on the basic principle of WO3 gas sensors to achieve high gas-sensing performance with good stability and repeatability. Metal oxide-based gas sensors are widely used for monitoring toxic gas leakages in the environment, industries and households. For better livelihood and a healthy environment, it is extremely helpful to have sensors with higher accuracy and improved sensing features. Design/methodology/approach In the present review, the authors focus on recent synthesis methods of WO3-based gas sensors to enhance sensing features towards toxic gases. Findings This work has proved that the synthesis method led to provide different morphologies of nanostructured WO3-based material in turn to improve gas sensing performance along with its sensing mechanism. Originality/value In this work, the authors reviewed challenges and possibilities associated with the nanostructured WO3-based gas sensors to trace toxic gases such as ammonia, H2S and NO2 for future research.

scholarly journals Nanostructured Gas Sensors: From Air Quality and Environmental Monitoring to Healthcare and Medical Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1927
Author(s):  
Xiaohu Chen ◽  
Michelle Leishman ◽  
Darren Bagnall ◽  
Noushin Nasiri
Keyword(s):  
Gas Sensors ◽  
Room Temperature ◽  
Gas Sensing ◽  
Building Blocks ◽  
Future Research ◽  
Practical Implementation ◽  
Industrial Sectors ◽  
Low Concentrations ◽  
Wide Range ◽  
Metal Oxide Gas Sensors

In the last decades, nanomaterials have emerged as multifunctional building blocks for the development of next generation sensing technologies for a wide range of industrial sectors including the food industry, environment monitoring, public security, and agricultural production. The use of advanced nanosensing technologies, particularly nanostructured metal-oxide gas sensors, is a promising technique for monitoring low concentrations of gases in complex gas mixtures. However, their poor conductivity and lack of selectivity at room temperature are key barriers to their practical implementation in real world applications. Here, we provide a review of the fundamental mechanisms that have been successfully implemented for reducing the operating temperature of nanostructured materials for low and room temperature gas sensing. The latest advances in the design of efficient architecture for the fabrication of highly performing nanostructured gas sensing technologies for environmental and health monitoring is reviewed in detail. This review is concluded by summarizing achievements and standing challenges with the aim to provide directions for future research in the design and development of low and room temperature nanostructured gas sensing technologies.

Comparative Effects of High-Tech Visual Scene Displays and Low-Tech Isolated Picture Symbols on Engagement From Students With Multiple Disabilities

2019 ◽  
Vol 50 (4) ◽  
pp. 693-702 ◽  
Author(s):  
Christine Holyfield ◽  
Sydney Brooks ◽  
Allison Schluterman
Keyword(s):  
Language Learning ◽  
Augmentative And Alternative Communication ◽  
Visual Analysis ◽  
Multiple Disabilities ◽  
Visual Scene ◽  
Future Research ◽  
High Tech ◽  
Single Subject ◽  
Wide Range ◽  
The Difference

Purpose Augmentative and alternative communication (AAC) is an intervention approach that can promote communication and language in children with multiple disabilities who are beginning communicators. While a wide range of AAC technologies are available, little is known about the comparative effects of specific technology options. Given that engagement can be low for beginning communicators with multiple disabilities, the current study provides initial information about the comparative effects of 2 AAC technology options—high-tech visual scene displays (VSDs) and low-tech isolated picture symbols—on engagement. Method Three elementary-age beginning communicators with multiple disabilities participated. The study used a single-subject, alternating treatment design with each technology serving as a condition. Participants interacted with their school speech-language pathologists using each of the 2 technologies across 5 sessions in a block randomized order. Results According to visual analysis and nonoverlap of all pairs calculations, all 3 participants demonstrated more engagement with the high-tech VSDs than the low-tech isolated picture symbols as measured by their seconds of gaze toward each technology option. Despite the difference in engagement observed, there was no clear difference across the 2 conditions in engagement toward the communication partner or use of the AAC. Conclusions Clinicians can consider measuring engagement when evaluating AAC technology options for children with multiple disabilities and should consider evaluating high-tech VSDs as 1 technology option for them. Future research must explore the extent to which differences in engagement to particular AAC technologies result in differences in communication and language learning over time as might be expected.

Understanding Limited Use of Amplification in Infants and Children Who Are Hard of Hearing

2015 ◽  
Vol 25 (1) ◽  
pp. 15-23 ◽  
Author(s):  
Ryan W. McCreery ◽  
Elizabeth A. Walker ◽  
Meredith Spratford
Keyword(s):  
Hard Of Hearing ◽  
Hearing Aid ◽  
Management Strategies ◽  
Infants And Children ◽  
Future Research ◽  
Research Needs ◽  
Case Examples ◽  
Hearing Aid Use ◽  
Wide Range ◽  
In Infants And Children

The effectiveness of amplification for infants and children can be mediated by how much the child uses the device. Existing research suggests that establishing hearing aid use can be challenging. A wide range of factors can influence hearing aid use in children, including the child's age, degree of hearing loss, and socioeconomic status. Audiological interventions, including using validated prescriptive approaches and verification, performing on-going training and orientation, and communicating with caregivers about hearing aid use can also increase hearing aid use by infants and children. Case examples are used to highlight the factors that influence hearing aid use. Potential management strategies and future research needs are also discussed.

The Attenuation of Very Low Frequency Brain Oscillations in Transitions from a Rest State to Active Attention

2009 ◽  
Vol 23 (4) ◽  
pp. 191-198 ◽  
Author(s):  
Suzannah K. Helps ◽  
Samantha J. Broyd ◽  
Christopher J. James ◽  
Anke Karl ◽  
Edmund J. S. Sonuga-Barke
Keyword(s):  
Brain Activity ◽  
Sampling Rate ◽  
Low Frequency ◽  
Future Research ◽  
Adhd Symptoms ◽  
Default Mode ◽  
Very Low Frequency ◽  
Wide Range ◽  
Interference Hypothesis ◽  
Mode Interference

Background: The default mode interference hypothesis ( Sonuga-Barke & Castellanos, 2007 ) predicts (1) the attenuation of very low frequency oscillations (VLFO; e.g., .05 Hz) in brain activity within the default mode network during the transition from rest to task, and (2) that failures to attenuate in this way will lead to an increased likelihood of periodic attention lapses that are synchronized to the VLFO pattern. Here, we tested these predictions using DC-EEG recordings within and outside of a previously identified network of electrode locations hypothesized to reflect DMN activity (i.e., S3 network; Helps et al., 2008 ). Method: 24 young adults (mean age 22.3 years; 8 male), sampled to include a wide range of ADHD symptoms, took part in a study of rest to task transitions. Two conditions were compared: 5 min of rest (eyes open) and a 10-min simple 2-choice RT task with a relatively high sampling rate (ISI 1 s). DC-EEG was recorded during both conditions, and the low-frequency spectrum was decomposed and measures of the power within specific bands extracted. Results: Shift from rest to task led to an attenuation of VLFO activity within the S3 network which was inversely associated with ADHD symptoms. RT during task also showed a VLFO signature. During task there was a small but significant degree of synchronization between EEG and RT in the VLFO band. Attenuators showed a lower degree of synchrony than nonattenuators. Discussion: The results provide some initial EEG-based support for the default mode interference hypothesis and suggest that failure to attenuate VLFO in the S3 network is associated with higher synchrony between low-frequency brain activity and RT fluctuations during a simple RT task. Although significant, the effects were small and future research should employ tasks with a higher sampling rate to increase the possibility of extracting robust and stable signals.

Factors Affecting Molecular Self-Assembly and Its Mechanism

2012 ◽  
Vol 9 (1) ◽  
pp. 43 ◽  
Author(s):  
Hueyling Tan
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Molecular Engineering ◽  
Molecular Structures ◽  
Polymer Science ◽  
New Approach ◽  
Factors Affecting ◽  
Dna Structures ◽  
Self Assembling ◽  
Wide Range

Molecular self-assembly is ubiquitous in nature and has emerged as a new approach to produce new materials in chemistry, engineering, nanotechnology, polymer science and materials. Molecular self-assembly has been attracting increasing interest from the scientific community in recent years due to its importance in understanding biology and a variety of diseases at the molecular level. In the last few years, considerable advances have been made in the use ofpeptides as building blocks to produce biological materials for wide range of applications, including fabricating novel supra-molecular structures and scaffolding for tissue repair. The study ofbiological self-assembly systems represents a significant advancement in molecular engineering and is a rapidly growing scientific and engineering field that crosses the boundaries ofexisting disciplines. Many self-assembling systems are rangefrom bi- andtri-block copolymers to DNA structures as well as simple and complex proteins andpeptides. The ultimate goal is to harness molecular self-assembly such that design andcontrol ofbottom-up processes is achieved thereby enabling exploitation of structures developed at the meso- and macro-scopic scale for the purposes oflife and non-life science applications. Such aspirations can be achievedthrough understanding thefundamental principles behind the selforganisation and self-synthesis processes exhibited by biological systems.

Sign in / Sign up

Export Citation Format

Share Document