Proso-Millet-Starch-Based Edible Films: An Innovative Approach for Food Industries

The present investigation searches for functional and antioxidant properties in proso millet starch and films. Proso millet starch was studied for its physical, chemical, morphological, and antioxidant properties. Furthermore, films were prepared from proso millet starch (native) and a starch–ĸ-carrageenan blend. Both films were characterized for moisture content, thickness, water-solubility, opacity, water vapor permeability, and textural and antioxidant properties. The amylose content, water absorption capacity, swelling, and solubility power of the proso millet starch were 19.19%, 87.5%, 15.32%, and 19%, respectively. Compared to aqueous extracts (0.68 mg GAE/g and 0.36 mg AAE/g), the total phenolics and total antioxidant capacity were observed to be higher in methanolic starch extracts (0.75 mg GAE/g and 0.41 mg AAE/g). Methanol extracts of native starch-based films showed higher antioxidant activity than the film prepared using a ĸ-carrageenan blend. The water vapor permeability and solubility of films prepared from native starch (2.38 g/Pa·s·m2 and 28%) were lower than those prepared using the ĸ-carrageenan blend (3.19 g/Pa·s·m2 and 42.05%). The findings may be of commercial interest to pharmaceutical and food industries in producing new antioxidant-rich drugs and food products.

Download Full-text

Research on Preparation and Properties of Edible Composite Protein Films

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.87.213 ◽

2011 ◽

Vol 87 ◽

pp. 213-222 ◽

Cited By ~ 7

Author(s):

Gui Yun Chen ◽

Qiao Lei

Keyword(s):

Mechanical Properties ◽

Water Vapor ◽

Water Solubility ◽

Water Vapor Permeability ◽

Sodium Caseinate ◽

Barrier Properties ◽

Edible Films ◽

Protein Isolate ◽

Vapor Permeability ◽

Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

Download Full-text

Conducting/biodegradable chitosan-polyaniline film; Antioxidant, color, solubility and water vapor permeability properties

Main Group Chemistry ◽

10.3233/mgc-210007 ◽

2021 ◽

Vol 20 (2) ◽

pp. 133-147

Author(s):

Sajad Pirsa ◽

Behzad Mohammadi

Keyword(s):

Water Vapor ◽

Food Packaging ◽

Water Solubility ◽

Light Transmission ◽

Antioxidant Properties ◽

Chitosan Film ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Surface Color ◽

Synthesis Time

In this study, chitosan-polyaniline nanocomposite film was prepared in combination with different concentrations of polyaniline at various synthesis times. Surface morphology, antioxidant properties, water solubility, water vapor permeability (WVP), color properties and light transparency properties of the films were investigated. The size, shape and morphology of the synthesized particles were examined with scanning electron microscopy (SEM) technique. The results indicated that the synthesized polyaniline particles were spherical and in the range of 45–70 nm. The results obtained from the study of the effect of polyaniline on the physical properties of the chitosan film showed that increasing polyaniline concentration and synthesis time causes a decrease in the rate of the water solubility and water vapor permeability. This is an important factor in expanding its use in food packaging. The results of the colorimetric studies showed that the polyaniline sharply changed the surface color of the film. Polyaniline also increased antioxidant properties of composite film. Investigating the light transmission and transparency of the films showed that the polyaniline reduced the transparency and transmission of light, which could be used to package products that are susceptible to oxidation in the light.

Download Full-text

Characteristics and Antimicrobial Properties of Active Edible Films Based on Pectin and Nanochitosan

International Journal of Molecular Sciences ◽

10.3390/ijms21062224 ◽

2020 ◽

Vol 21 (6) ◽

pp. 2224 ◽

Cited By ~ 4

Author(s):

Thi Minh Phuong Ngo ◽

Thanh Hoi Nguyen ◽

Thi Mong Quyen Dang ◽

Thi Xo Tran ◽

Pornchai Rachtanapun

Keyword(s):

Water Vapor ◽

Colletotrichum Gloeosporioides ◽

Water Solubility ◽

Oxygen Permeability ◽

Antimicrobial Properties ◽

Water Vapor Permeability ◽

Edible Films ◽

Attenuated Total Reflectance ◽

Vapor Permeability ◽

Microstructural Studies

This study was aimed at creating new films and determine some functional packaging properties of pectin:nanochitosan films with ratios of pectin:nanochitosan (P:NSC) of 100:0; 75:25; 50:50; 25:75 and 0:100 (%w/w). The effects of the proportions of pectin:nanochitosan incorporation on the thickness, mechanical properties, water vapor permeability, water-solubility, and oxygen permeability were investigated. The microstructural studies were done using scanning electron microscopy (SEM). The interactions between pectin and nanochitosan were elucidated by Attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The results showed that the blending of pectin with nanochitosan at proportions of 50:50 increased the tensile strength to 8.96 MPa, reduced the water solubility to 37.5%, water vapor permeability to 0.2052 g·mm/m2·day·kPa, and the oxygen permeability to 47.67 cc·mm/m2·day. The results of the contact angle test indicated that P:NCS films were hydrophobic, especially, pectin:nanochitosan films inhibited the growth of Colletotrichum gloeosporioides, Saccharomyces cerevisiae, Aspergillus niger, and Escherichia coli. So, P:NCS films with a proportion of 50:50 can be used as active films to extend the shelf life of food.

Download Full-text

Ultraviolet blocking and antioxidant polyvinyl alcohol films incorporated with baicalin extraction from Scutellaria baicalensis Georgi

Journal of Polymer Engineering ◽

10.1515/polyeng-2020-0071 ◽

2021 ◽

Vol 0 (0) ◽

Author(s):

Jinshu Liu ◽

Xiaoyan Ma ◽

Wenzhao Shi ◽

Jianwei Xing ◽

Chaoqun Ma ◽

...

Keyword(s):

Water Vapor ◽

Polyvinyl Alcohol ◽

Radical Scavenging Activity ◽

Antioxidant Properties ◽

Radical Scavenging ◽

Water Vapor Permeability ◽

Scutellaria Baicalensis ◽

Vapor Permeability ◽

Protective Film ◽

Uv Blocking

Abstract Baicalin, an active flavonoid ingredient of Scutellaria baicalensis Georgi, was extracted by heat reflux extraction and showed the same significance UV absorption property with standard baicalin. Active films were prepared from polyvinyl alcohol (PVA) containing baicalin extract by casting method. The effect of baicalin extracts on the UV-blocking, optical, antioxidant property, water vapor permeability, swelling and mechanical properties of the films were studied. UV–vis transmittance spectra showed that PVA films incorporated with baicalin extract blocked ultraviolet light range from 280–400 nm even with low concentration of baicalin (0.5 wt%) and maintain the high transparency in visible spectrum. The outstanding UV-blocking properties of PVA films incorporated with baicalin extract were also confirmed by Rhodamine B degradation. Baicalin conferred antioxidant properties to PVA films as determined by DPPH radical scavenging activity. Due to the interaction between hydroxy groups of baicalin and PVA molecule, water vapor permeability, swelling and elongation at break of the films were decreased accompanied with the increasing in tensile strength and Young’s modulus. FTIR reveal that the interaction between PVA molecules was significant changed by the introduction of baicalin. These results suggest that PVA film incorporated with baicalin extract can be used for the development of functional protective film.

Download Full-text

The Effect of Extraction Conditions on the Barrier and Mechanical Properties of Kefiran Films

Coatings ◽

10.3390/coatings11050602 ◽

2021 ◽

Vol 11 (5) ◽

pp. 602

Author(s):

Carmen Rodica Pop ◽

Teodora Emilia Coldea ◽

Liana Claudia Salanţă ◽

Alina Lăcrămioara Nistor ◽

Andrei Borşa ◽

...

Keyword(s):

Water Vapor ◽

Conformational Changes ◽

Water Vapor Permeability ◽

Edible Films ◽

Film Structure ◽

Water Soluble ◽

Vapor Permeability ◽

Water Molecules ◽

Compact Structure ◽

Technology Applications

Kefiran is an exopolysaccharide classified as a heteropolysaccharide comprising glucose and galactose in equimolar quantities, and it is classified as a water-soluble glucogalactan. This work aimed to investigate the effect of different extraction conditions of kefiran on the structural and physical properties of the edible films obtained. Fourier-transform infrared spectroscopy and scanning electron microscopy were performed, together with a determinations of moisture content, solubility, water vapor permeability and degree of swelling. The kefiran films presented values of the water vapor permeability between 0.93 and 4.38 × 10−11 g/m.s.Pa. These results can be attributed to the development of a more compact structure, where glycerol had no power to increase the free volume and the water vapor diffusion through their structure. The possible conformational changes in the kefiran film structure, due to the interspersing of the plasticizers and water molecules that they absorb, could be the reason for producing flexible kefiran films in the case of using glycerol as a plasticizer at 7.5% w/w. Moreover, it was observed that the extraction conditions are a significant factor in the properties of these films and their food technology applications.

Download Full-text

Preparation, properties and applications of wheat gluten edible films

Agricultural and Food Science ◽

10.23986/afsci.5650 ◽

2000 ◽

Vol 9 (1) ◽

pp. 23-35 ◽

Cited By ~ 24

Author(s):

P. TANADA-PALMU ◽

H. HELÉN ◽

L. HYVÖNEN

Keyword(s):

Weight Loss ◽

Tensile Strength ◽

Water Vapor ◽

Wheat Gluten ◽

Single Layer ◽

Water Vapor Permeability ◽

Edible Films ◽

Bilayer Film ◽

Vapor Permeability ◽

Elongation At Break

Edible films from wheat gluten were prepared with various amounts of glycerol as a plasticizer. Water vapor permeability, oxygen permeability, tensile strength and percentage elongation at break at different water activities ( aw ) were measured. Films with low amounts of glycerol had lower water vapor and oxygen permeabilities, higher tensile strength and lower elongation at break. Wheat gluten coatings reduced weight loss during two weeks of storage for cherry tomatoes and sharon fruits compared to uncoated controls. A bilayer film of wheat gluten and beeswax significantly lowered weight loss from coated cheese cubes compared to single layer coating of wheat gluten.;

Download Full-text

Effect of Chitosan Nanoparticles Incorporated with Antioxidants from Salvia hispanica L. on the Amaranth Flour Films

Food Technology and Biotechnology ◽

10.17113/ftb.60.01.22.7144 ◽

2021 ◽

Vol 60 (1) ◽

Author(s):

Gema Morales-Olán ◽

María Antonieta Ríos-Corripio ◽

Aleida Selene Hernández-Cázares ◽

Placido Zaca-Morán ◽

Silvia Luna-Suárez ◽

...

Keyword(s):

Antioxidant Activity ◽

Tensile Strength ◽

Water Vapor ◽

Antioxidant Properties ◽

Chitosan Nanoparticles ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Salvia Hispanica ◽

Amaranth Flour ◽

Salvia Hispanica L

Research background. Amaranth flour (Amaranthus hypochondriacus) produces films with excellent barrier properties against water vapor, allowing food preservation, but the mechanical properties are poor versus to synthetic films. One strategy to improve these properties is the incorporation of nanoparticles. The particles can also serve as a vehicle for the addition of antioxidants agents into the films. The objective of this work was to optimize the formulation for preparation of amaranth flour films treated with antioxidant chia (Salvia hispanica L.) extract-loaded chitosan particles using RSM. Experimental approach. Chitosan nanoparticles with the extract were synthesized by ionic gelation, and the films were made by the casting method. Three independent variables were assigned: amaranth flour (4-6 %), glycerol (25-35 %), and chitosan nanoparticles loaded with the chia extract (0-0.75 %). We then evaluated the physical (thickness), mechanical (tensile strength, Young´s modulus, and elongation), barrier (water vapor permeability, moisture, and water solubility), and antioxidant properties of the films. The experimental results of the properties were analyzed using a Box-Behnken experimental design generating 15 runs with three replicates at the central point. Results and conclusions. Second and third order polynomial models were obtained from the ANOVA analysis of the evaluated responses, and high coefficients of determination were found (0.91-1.0). The films presented a water vapor permeability of 0.82-2.39·10-7 (g·mm)/(Pa·s·m2), a tensile strength of 0.33-1.63 MPa, and antioxidant activity of 2.24-5.65 %. The variables had different effects on the films: The glycerol negatively affected their properties, and the permeability values increased with amaranth flour concentration. The nanoparticles improved the mechanical, barrier, and antioxidant properties of the films versus films without nanosystems. The optimal formulation was 4 % amaranth flour, 25 % of glycerol, and 0.36 % of chitosan nanoparticles. The optimized films had better mechanical (1.62 MPa) properties, a low water vapor permeability value (0.91·10-7 (g·mm)/(Pa·s·m2)), and moderate antioxidant activity (6.43 %). Novelty and scientific contribution. The results show the effect of chitosan nanoparticles on the properties of amaranth flour films for the first time. The resulting equations are useful in the design of food packaging.

Download Full-text

Formulation and Characterization of Edible Films Based on Organic Mucilage from Mexican Opuntia ficus-indica

Coatings ◽

10.3390/coatings9080506 ◽

2019 ◽

Vol 9 (8) ◽

pp. 506 ◽

Cited By ~ 9

Author(s):

Dulce C. González Sandoval ◽

Brenda Luna Sosa ◽

Guillermo Cristian Guadalupe Martínez-Ávila ◽

Humberto Rodríguez Fuentes ◽

Victor H. Avendaño Abarca ◽

...

Keyword(s):

Water Vapor ◽

Light Transmission ◽

Transmission Rate ◽

Film Formation ◽

Water Vapor Permeability ◽

Edible Films ◽

Solution Viscosity ◽

Vapor Permeability ◽

Yellowness Index ◽

Opuntia Ficus Indica

The consumption of organic products has increased in recent years. One of the most important products in Mexico is nopal. Nopal’s content and properties make the formulation of edible films possible. In this study, we aimed to develop and characterize biodegradable edible films containing mucilage from Opuntia ficus-indica. The mucilage extraction yield, thickness, color, water vapor permeability, light transmission rate, film transparency, solubility, stability of dispersion, and puncture strength were measured. The use of mucilage from different cultivars affected the water vapor permeability (8.40 × 10−11 g·m−1·s−1·Pa−1 for cultivar Villanueva, 3.48 × 10−11 g·m−1·s−1·Pa−1 for Jalpa, and 1.63 × 10−11 g·m−1·s−1·Pa−1 for Copena F1). Jalpa provided the most soluble mucilage with the highest thickness (0.105 mm). Copena F1 provided the clearest film with the greatest transparency (3.81), the best yellowness index, and the highest resistance (4.44 N·mm−1). Furthermore, this film had the best light transmission rate (48.93%). The Copena F1 showed the best film formation solution viscosity. These results indicate that mucilage mixed with pectin is a potential source for the formulation of edible films.

Download Full-text

Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽

10.3390/polym12010158 ◽

2020 ◽

Vol 12 (1) ◽

pp. 158

Author(s):

Yao Dou ◽

Liguang Zhang ◽

Buning Zhang ◽

Ming He ◽

Weimei Shi ◽

...

Keyword(s):

Water Vapor ◽

Carboxymethyl Cellulose ◽

Food Packaging ◽

Light Transmission ◽

Value Added ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Edible Films ◽

Vapor Permeability ◽

Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

Download Full-text