scholarly journals Side-Channel Power Resistance for Encryption Algorithms Using Implementation Diversity

Cryptography ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 13
Author(s):  
Ivan Bow ◽  
Nahome Bete ◽  
Fareena Saqib ◽  
Wenjie Che ◽  
Chintan Patel ◽  
...  
Keyword(s):  
Power Analysis ◽  
Side Channel ◽  
Side Channel Attacks ◽  
Dynamic Partial Reconfiguration ◽  
Channel Power ◽  
Diversity Techniques ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
Encryption Algorithms

This paper investigates countermeasures to side-channel attacks. A dynamic partial reconfiguration (DPR) method is proposed for field programmable gate arrays (FPGAs)s to make techniques such as differential power analysis (DPA) and correlation power analysis (CPA) difficult and ineffective. We call the technique side-channel power resistance for encryption algorithms using DPR, or SPREAD. SPREAD is designed to reduce cryptographic key related signal correlations in power supply transients by changing components of the hardware implementation on-the-fly using DPR. Replicated primitives within the advanced encryption standard (AES) algorithm, in particular, the substitution-box (SBOX)s, are synthesized to multiple and distinct gate-level implementations. The different implementations change the delay characteristics of the SBOXs, reducing correlations in the power traces, which, in turn, increases the difficulty of side-channel attacks. The effectiveness of the proposed countermeasures depends greatly on this principle; therefore, the focus of this paper is on the evaluation of implementation diversity techniques.

Masked FPGA Bitstream Encryption via Partial Reconfiguration

2019 ◽  
Vol 28 (03n04) ◽  
pp. 1940022
Author(s):  
Yanping Gong ◽  
Fengyu Qian ◽  
Lei Wang
Keyword(s):  
Side Channel ◽  
Light Weight ◽  
Partial Reconfiguration ◽  
Hardware Complexity ◽  
Side Channel Attacks ◽  
Gate Arrays ◽  
Critical Design ◽  
Iot Applications ◽  
Field Programmable ◽  
Programmable Gate Arrays

Field Programmable Gate Arrays (FPGA), as one of the popular circuit implementation platforms, provide the flexible and powerful way for different applications. IC designs are configured to FPGA through bitstream files. However, the configuration process can be hacked by side channel attacks (SCA) to acquire the critical design information, even under the protection of encryptions. Reports have shown many successful attacks against the FPGA cryptographic systems during the bitstream loading process to acquire the entire design. Current countermeasures, mostly random masking methods, are effective but also introduce large hardware complexity. They are not suitable for resource-constrained scenarios such as Internet of Things (IoT) applications. In this paper, we propose a new secure FPGA masking scheme to counter the SCA. By utilizing the FPGA partial reconfiguration feature, the proposed technique provides a light-weight and flexible solution for the FPGA decryption masking.

Dynamically Reconfigurable Embedded Architectures for Safe Transportation Systems

2014 ◽  
pp. 347-371 ◽  
Author(s):  
Naim Harb ◽  
Smail Niar ◽  
Mazen A. R. Saghir
Keyword(s):  
Integrated Circuits ◽  
Embedded System ◽  
Transportation Systems ◽  
Base System ◽  
Dynamic Partial Reconfiguration ◽  
Dynamically Reconfigurable ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
Mtt Algorithm

Embedded system designers are increasingly relying on Field Programmable Gate Arrays (FPGAs) as target design platforms. Today's FPGAs provide high levels of logic density and rich sets of embedded hardware components. They are also inherently flexible and can be easily and quickly modified to meet changing applications or system requirements. On the other hand, FPGAs are generally slower and consume more power than Application-Specific Integrated Circuits (ASICs). However, advances in FPGA architectures, such as Dynamic Partial Reconfiguration (DPR), are helping bridge this gap. DPR enables a portion of an FPGA device to be reconfigured while the device is still operating. This chapter explores the advantage of using the DPR feature in an automotive system. The authors implement a Driver Assistant System (DAS) based on a Multiple Target Tracking (MTT) algorithm as the automotive base system. They show how the DAS architecture can be adjusted dynamically to different scenario situations to provide interesting functionalities to the driver.

An Efficient Hardware/Software Communication Mechanism for Reconfigurable NoC

2010 ◽  
pp. 84-109
Author(s):  
Wei-Wen Lin ◽  
Jih-Sheng Shen ◽  
Pao-Ann Hsiung
Keyword(s):  
Shared Memory ◽  
Partial Reconfiguration ◽  
Single Chip ◽  
Dynamic Partial Reconfiguration ◽  
Gate Arrays ◽  
Single Output ◽  
Communication Architectures ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
On Chip

With the progress of technology, more and more intellectual properties (IPs) can be integrated into one single chip. The performance bottleneck has shifted from the computation in individual IPs to the communication among IPs. A Network-on-Chip (NoC) was proposed to provide high scalability and parallel communication. An ASIC-implemented NoC lacks flexibility and has a high non-recurring engineering (NRE) cost. As an alternative, we can implement an NoC in a Field Programmable Gate Arrays (FPGA). In addition, FPGA devices can support dynamic partial reconfiguration such that the hardware circuits can be configured into an FPGA at run time when necessary, without interfering hardware circuits that are already running. Such an FPGA-based NoC, namely reconfigurable NoC (RNoC), is more flexible and the NRE cost of FPGA-based NoC is also much lower than that of an ASIC-based NoC. Because of dynamic partial reconfiguration, there are several issues in the RNoC design. We focus on how communication between hardware and software can be made efficient for RNoC. We implement three communication architectures for RNoC namely single output FIFO-based architecture, multiple output FIFO-based architecture, and shared memory-based architecture. The average communication memory overhead is less on the single output FIFO-based architecture and the shared memory-based architecture than on the multiple output FIFO-based architecture when the lifetime interval is smaller than 0.5. In the performance analysis, some real applications are applied. Real application examples show that performance of the multiple output FIFO-based architecture is more efficient by as much as 1.789 times than the performance of the single output FIFO-based architecture. The performance of the shared memory-based architecture is more efficient by as much as 1.748 times than the performance of the single output FIFO-based architecture.

An Overview of Power Analysis Attacks Against Field Programmable Gate Arrays

2006 ◽  
Vol 94 (2) ◽  
pp. 383-394 ◽  
Author(s):  
O.-X. Standaert ◽  
E. Peeters ◽  
G. Rouvroy ◽  
J.-J. Quisquater
Keyword(s):  
Power Analysis ◽  
Field Programmable Gate Arrays ◽  
Power Analysis Attacks ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays

scholarly journals VITI: A Tiny Self-Calibrating Sensor for Power-Variation Measurement in FPGAs

2021 ◽  
pp. 657-678
Author(s):  
Brian Udugama ◽  
Darshana Jayasinghe ◽  
Hassaan Saadat ◽  
Aleksandar Ignjatovic ◽  
Sri Parameswaran
Keyword(s):  
Power Consumption ◽  
Power Analysis ◽  
Supply Voltage ◽  
Temperature Changes ◽  
Gate Arrays ◽  
Autonomous Adaptation ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
On Chip ◽  
Delay Elements

On-chip sensors, built using reconfigurable logic resources in field programmable gate arrays (FPGAs), have been shown to sense variations in signalpropagation delay, supply voltage and power consumption. These sensors have been successfully used to deploy security attacks called Remote Power Analysis (RPA) Attacks on FPGAs. The sensors proposed thus far consume significant logic resources and some of them could be used to deploy power viruses. In this paper, a sensor (named VITI) occupying a far smaller footprint than existing sensors is presented. VITI is a self-calibrating on-chip sensor design, constructed using adjustable delay elements, flip-flops and LUT elements instead of combinational loops, bulky carry chains or latches. Self-calibration enables VITI the autonomous adaptation to differing situations (such as increased power consumption, temperature changes or placement of the sensor in faraway locations from the circuit under attack). The efficacy of VITI for power consumption measurement was evaluated using Remote Power Analysis (RPA) attacks and results demonstrate recovery of a full 128-bit Advanced Encryption Standard (AES) key with only 20,000 power traces. Experiments demonstrate that VITI consumes 1/4th and 1/16th of the area compared to state-of-the-art sensors such as time to digital converters and ring oscillators for similar effectiveness.

scholarly journals FPGA-Based Reliable Fault Secure Design for Protection against Single and Multiple Soft Errors

Electronics ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 2064
Author(s):  
Manar N. Shaker ◽  
Ahmed Hussien ◽  
Gehad I. Alkady ◽  
Hassanein H. Amer ◽  
Ihab Adly
Keyword(s):  
Error Detection ◽  
System Reliability ◽  
Fault Tolerant ◽  
Dynamic Partial Reconfiguration ◽  
Access Port ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
Modular Redundancy ◽  
Internal Configuration

Field programmable gate arrays (FPGAs) are increasingly used in industry (e.g., biomedical, space, and automotive industries). FPGAs are subjected to single, as well as multiple event upsets (SEUs and MEUs), due to the continuous shrinking of transistor dimensions. These upsets inevitably decrease system lifetime. Fault-tolerant techniques are often used to mitigate these problems. In this research, penta and hexa modular redundancy, as well as dynamic partial reconfiguration (DPR), are used to increase system reliability. We show, depending on the relative rates of the SEUs and MEUs, that penta modular redundancy has a higher reliability than hexa modular redundancy, which is a counter-intuitive result in some cases since increasing redundancy is expected to increase reliability. Focusing on penta modular redundancy, an error detection and recovery mechanism (voter) is designed. This mechanism uses the internal configuration access port (ICAP) and its associated controller, as well as DPR to mitigate SEUs and MEUs. Then, it is implemented on Xilinx Vivado tools targeting the Kintex7 7k410tfbg676 device. Finally, we show how to render this design fault secure in the event that SEUs or MEUs affect the voter itself. This fault secure voter either produces the correct output or gives an indication that the output is incorrect.

scholarly journals AREEBA: An Area Efficient Binary Huff-Curve Architecture

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1490
Author(s):  
Asher Sajid ◽  
Muhammad Rashid ◽  
Sajjad Shaukat Jamal ◽  
Malik Imran ◽  
Saud S. Alotaibi ◽  
...  
Keyword(s):  
Elliptic Curve Cryptography ◽  
Power Analysis ◽  
State Of The Art ◽  
Power Analysis Attacks ◽  
Low Area ◽  
Gate Arrays ◽  
Asymmetric Cryptography ◽  
Field Programmable ◽  
Programmable Gate Arrays ◽  
Computational Resources

Elliptic curve cryptography is the most widely employed class of asymmetric cryptography algorithm. However, it is exposed to simple power analysis attacks due to the lack of unifiedness over point doubling and addition operations. The unified crypto systems such as Binary Edward, Hessian and Huff curves provide resistance against power analysis attacks. Furthermore, Huff curves are more secure than Edward and Hessian curves but require more computational resources. Therefore, this article has provided a low area hardware architecture for point multiplication computation of Binary Huff curves over GF(2163) and GF(2233). To achieve this, a segmented least significant digit multiplier for polynomial multiplications is proposed. In order to provide a realistic and reasonable comparison with state of the art solutions, the proposed architecture is modeled in Verilog and synthesized for different field programmable gate arrays. For Virtex-4, Virtex-5, Virtex-6, and Virtex-7 devices, the utilized hardware resources in terms of hardware slices over GF(2163) are 5302, 2412, 2982 and 3508, respectively. The corresponding achieved values over GF(2233) are 11,557, 10,065, 4370 and 4261, respectively. The reported low area values provide the acceptability of this work in area-constrained applications.

Sign in / Sign up

Export Citation Format

Share Document