scholarly journals Sonochemical Synthesis of Cadmium(II) Coordination Polymer Nanospheres as Precursor for Cadmium Oxide Nanoparticles

Crystals ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 199 ◽  
Author(s):  
Farhad Afkhami ◽  
Ali Khandar ◽  
Ghodrat Mahmoudi ◽  
Reza Abdollahi ◽  
Atash Gurbanov ◽  
...  
Keyword(s):  
Coordination Polymer ◽  
Cadmium Oxide ◽  
Average Diameter ◽  
Synthetic Methods ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Nanospheres of a new coordination polymer {[Cd2(µ-HL)(µ-L)(NO3)3(H2O)]·H2O}n (1) were easily prepared by a sonochemical method from cadmium(II) nitrate and HL (HL, pyridine-2-carboxaldehyde isonicotinoyl hydrazone) in ethanol. Single crystals of 1 were also obtained using a branched tube method. The crystal structure of 1 indicates that the µ-HL/µ-L− blocks act as linkers between the Cd(II) centers, assembling them into 1D tooth-shaped interdigitated chains, which are further interlinked into a complex 3D H-bonded network with a rare hms (3,5-conn) topology. Nanoparticles of 1 were characterized by elemental analysis, FT-IR spectroscopy, and powder X-ray diffraction (XPRD), while their spherical morphology was confirmed by transmission electron microscopy (TEM). Furthermore, in the presence of a surfactant, the thermolysis of sonochemically generated nanoparticles of 1 led to the formation of cadmium oxide nanospheres (cubic CdO) with an average diameter of 10 nm. This study extends the application of sonochemical synthetic methods for the generation of phase pure nanoparticles of coordination polymers and their thermolysis products.

Synthesis and Characterization of HgSe Nanostructure Using a Novel Precursor

2013 ◽  
Vol 32 (2) ◽  
pp. 157-162 ◽  
Author(s):  
Mahdiyeh Esmaeili-Zare ◽  
Masoud Salavati-Niasari ◽  
Davood Ghanbari
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mercury Selenide ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractMercury selenide nanostructures were synthesized from the reaction of N, N′-bis(salicylidene)propane-1,3-diamine mercury complex, (Hg(Salpn)) as a novel precursor, via sonochemical method. The effect of different surfactant on the morphology and particle size of the products was investigated. Products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray energy dispersive spectroscopy (EDS).

Hydrothermal synthesis, crystal structure and properties of a two-dimensional uranyl coordination polymer based on a flexible zwitterionic ligand

2018 ◽  
Vol 74 (3) ◽  
pp. 366-371 ◽  
Author(s):  
Wen Cui ◽  
Ruyu Wang ◽  
Xi Shu ◽  
Yu Fan ◽  
Yang Liu ◽  
...  
Keyword(s):  
Coordination Polymer ◽  
Hydrothermal Reaction ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Uranyl Compounds ◽  
X Ray ◽  
Potential Applications ◽  
Ft Ir ◽  
Fuel Reprocessing ◽  
Ft Ir Spectroscopy

The interaction between the uranyl cation, (UO2)2+, and organic species is of interest due to the potential applications of the resulting compounds with regard to nuclear waste disposal and nuclear fuel reprocessing. The hydrothermal reaction of various uranyl compounds with flexible zwitterionic 1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate) dihydrochloride (Bpmb·2HCl) in deionized water containing drops of H2SO4resulted in the formation of a novel two-dimensional uranyl coordination polymer, namely poly[tetraoxido{μ2-1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate)}di-μ3-sulfato-diuranium(VI)], [(UO2)2(SO4)2(C20H16N2O4)]n, (1). Single-crystal X-ray diffraction reveals that this coordination polymer exhibits a layered arrangement and the (UO2)2+centre is coordinated by five equatorial O atoms. The structure was further characterized by FT–IR spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA). The polymer shows high thermal stability up to 696 K. Furthermore, the photoluminescence properties of (1) has also been studied, showing it to exhibit a typical uranyl fluorescence.

Synthesis and Characterization of Structure of Fe3O4@Graphene Oxide Nanocomposites

2016 ◽  
Vol 25 (6) ◽  
pp. 096369351602500 ◽  
Author(s):  
Ruimin Fu ◽  
Mingfu Zhu
Keyword(s):  
Graphene Oxide ◽  
Drug Carrier ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Co Precipitation ◽  
Ft Ir Spectroscopy

Nowadays, the hummers method for preparation of graphene oxide (GO) was improved. The grapheme oxide @ Fe3O4 magnetic nanocomposites were synthesized by co-precipitation method. After analysing the morphology and structure of obtained nanocomposites by X-ray diffraction (XRD), transmission electron microscope (TEM) and Fourier transform infrared (FT-IR) spectroscopy, the result was shown as follows. The particle size of Fe3O4 in nanocomposites is 30 nm. Many functional groups are found in grapheme oxide, and such groups could be used to bind with the drug. In the test for magnetic properties, the nanocomposites gathered rapidly in the vicinity of the permanent magnet. The nanocomposites, with high superparamagnetism, can be used in the following applications: drug targeting transports, drug carrier, and diagnosis assistant system.

scholarly journals Identification of Iron Oxides and Effects of Magnetic Materials Washing for Sand Iron Jomblom Beach Using Sonochemical Methods

2019 ◽  
Vol 16 (3) ◽  
pp. 140-151
Author(s):  
Ricka Prasdiantika ◽  
Niyar Candra Agustin ◽  
Abdul Rohman
Keyword(s):  
Magnetic Material ◽  
Iron Oxide ◽  
Material Characterization ◽  
Crystal Size ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Magnetite Fe3o4 ◽  
Ft Ir

This study aims to prepare iron sand, determine the type of iron oxide, and determine the effect of washing iron sand with sonochemical methods. Iron sand samples were obtained from Jomblom Beach, Kendal Regency. Iron sand was separated using an external magnet to obtain magnetic material. The magnetic material obtained was washed using distilled water manually stirred and using the sonochemical method. The material was dried at 80 °C. Material characterization was carried out using X-Ray Fluorescence (XRF) to determine the elements contained in iron sand, Fourier Transform Infrared (FT-IR) Spectrophotometer to identify functional groups in iron sand, X-Ray Diffraction (XRD) to find out the crystal size and crystallinity of iron sand, and the Transmission Electron microscope (TEM) to determine the morphology of iron sand. The characterization results showed that the iron sand of Jomblom Beach contained Fe (72.28%), Ti (7.89%), Al (7.00%), and Si (7.60%). The iron oxide contained in the Jomblom Beach iron sand was dominated by magnetite (Fe3O4). Washing iron sand magnetic material using the sonochemical method increased the composition of the element Fe, increased the crystallinity of the magnetic material, prevented aggregation, and reduced the crystal size of the magnetic material. Magnetic material which was washed using the sonochemical method produced 79.47% Fe element, crystallinity 74.94%, and crystal size 52.78 nm.

Magnetite: Synthesis and Characterization

2013 ◽  
Vol 543 ◽  
pp. 460-463
Author(s):  
Christina Giannouli
Keyword(s):  
Room Temperature ◽  
Size Range ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Micro Emulsion ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Magnetite nanopowder is a nanostructured magnetic material which is of great importance due to its electric and magnetic properties at room temperature. There are quite enough methods to produce magnetite. In the present work, four samples of magnetite powder were produced, the first three with the alkaline precipitation method from aqueous solution of mixed Fe (II)/Fe (III) salts, without any surfactants and the last one with the micro emulsion method. The prepared powders have been characterized using transmission electron microscopy, Raman and FT-IR spectroscopy and x-ray diffraction in order the structure and the morphology of magnetite to be examined. The produced magnetite powders have a size range of 10-12±2nm and the chemical composition of magnetite.

scholarly journals Microwave-assisted synthesis, characterization and photoluminescence of shuttle-like BaMoO4 microstructure

2015 ◽  
Vol 33 (3) ◽  
pp. 537-540 ◽  
Author(s):  
Anukorn Phuruangrat ◽  
Budsabong Kuntalue ◽  
Titipun Thongtem ◽  
Somchai Thongtem
Keyword(s):  
Electron Microscopy ◽  
Microwave Assisted Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
Ft Ir ◽  
Xrd Patterns ◽  
Scanning Electron ◽  
Ft Ir Spectroscopy

Abstract Shuttle-like BaMoO4 microstructure has been successfully synthesized from Ba(N03)2·4H20 and Na2MoO4·2H2O as starting materials in ethylene glycol solvent containing 20 mL 5 M NaOH by microwave radiation at 180 W for 30 min. The as- synthesized BaMoO4 product was characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Raman spectrophotometry, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photolumines­cence (PL) spectroscopy. XRD patterns revealed that the products was tetragonal BaMoO4 phase. SEM and TEM characteriza­tion showed that the product had a shuttle-like BaMoO4 microstructure. PL of the shuttle-like BaMoO4 microstructure showed a maximum emission at 466 nm excited by 280 nm wavelength.

Facile Hydrothermal Synthesis of CoSO4ċH2O Nanoparticles and Barite Microcubes from Novel Precursors

2012 ◽  
Vol 31 (6) ◽  
pp. 711-715 ◽  
Author(s):  
Azam Sobhani ◽  
Masoud Salavati-Niasari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Thermal Decomposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Scanning Electron ◽  
Ft Ir Spectroscopy

AbstractCoSO4ċH2O nanoparticles and barite (BaSO4) microcubes have been prepared by hydrothermal decomposition of new precursors [Co(tsc)2]Cl2 and [Ba(tsc)2]Cl2 (tsc =  thiosemicarbazide), respectively. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. As a comparison between two methods, thermal decomposition of novel precursors in high temperature boiling organic solvents were examined.

scholarly journals Hydrothermal Synthesis, Characterization and Exploration of Photocatalytic Activities of Polyoxometalate: Ni-CoWO4 Nanoparticles

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 456
Author(s):  
Fahad A. Alharthi ◽  
Hamdah S. Alanazi ◽  
Amjad Abdullah Alsyahi ◽  
Naushad Ahmad
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Photocatalytic Reactions ◽  
Cobalt Tungstate

This study demonstrated the hydrothermal synthesis of bimetallic nickel-cobalt tungstate nanostructures, Ni-CoWO4 (NCW-NPs), and their phase structure, morphology, porosity, and optical properties were examined using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman instruments. It was found that as-calcined NCW-NPs have a monoclinic phase with crystal size ~50–60 nm and is mesoporous. It possessed smooth, spherical, and cubic shape microstructures with defined fringe distance (~0.342 nm). The photocatalytic degradation of methylene blue (MB) and rose bengal (RB) dye in the presence of NCW-NPs was evaluated, and about 49.85% of MB in 150 min and 92.28% of RB in 90 min degraded under visible light. In addition, based on the scavenger’s study, the mechanism for photocatalytic reactions is proposed.

scholarly journals Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1786
Author(s):  
Carla Queirós ◽  
Chen Sun ◽  
Ana M. G. Silva ◽  
Baltazar de Castro ◽  
Juan Cabanillas-Gonzalez ◽  
...  
Keyword(s):  
Water Content ◽  
Coordination Polymers ◽  
Metal Ion ◽  
Low Cost ◽  
Microwave Assisted Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wide Range ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Sign in / Sign up

Export Citation Format

Share Document